This is, for instance, needed to log in a container.
Without this, the user cannot be identified and the console login
fails with "Login incorrect".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is the protocol used by udevd to manage kernel events.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
rtnetlink is needed to use iproute package (ip addr, ip route)
and dhcp client.
Examples:
Without this patch:
# ip link
Cannot open netlink socket: Address family not supported by protocol
# ip addr
Cannot open netlink socket: Address family not supported by protocol
# ip route
Cannot open netlink socket: Address family not supported by protocol
# dhclient eth0
Cannot open netlink socket: Address family not supported by protocol
Cannot open netlink socket: Address family not supported by protocol
With this patch:
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.197/24 brd 192.168.122.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::216:3eff:fe89:6bd7/64 scope link
valid_lft forever preferred_lft forever
# ip route
default via 192.168.122.1 dev eth0
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.197
# ip addr flush eth0
# ip addr add 192.168.122.10 dev eth0
# ip addr show eth0
51: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP qlen 1000
link/ether 00:16:3e:89:6b:d7 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.10/32 scope global eth0
valid_lft forever preferred_lft forever
# ip route add 192.168.122.0/24 via 192.168.122.10
# ip route
192.168.122.0/24 via 192.168.122.10 dev eth0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Original qemu-binfmt-conf.sh is only able to write configuration
into /proc/sys/fs/binfmt_misc, and the configuration is lost on reboot.
This script can configure debian and systemd services to restore
configuration on reboot. Moreover, it is able to manage binfmt
credential and to configure the path of the interpreter.
List of supported CPU is:
i386 i486 alpha arm sparc32plus ppc ppc64 ppc64le
m68k mips mipsel mipsn32 mipsn32el mips64 mips64el
sh4 sh4eb s390x aarch64
Usage: qemu-binfmt-conf.sh [--qemu-path PATH][--debian][--systemd CPU]
[--help][--credential yes|no][--exportdir PATH]
Configure binfmt_misc to use qemu interpreter
--help: display this usage
--qemu-path: set path to qemu interpreter (/usr/local/bin)
--debian: don't write into /proc,
instead generate update-binfmts templates
--systemd: don't write into /proc,
instead generate file for systemd-binfmt.service
for the given CPU
--exportdir: define where to write configuration files
(default: /etc/binfmt.d or /usr/share/binfmts)
--credential: if yes, credential an security tokens are
calculated according to the binary to interpret
To import templates with update-binfmts, use :
sudo update-binfmts --importdir /usr/share/binfmts --import qemu-CPU
To remove interpreter, use :
sudo update-binfmts --package qemu-CPU --remove qemu-CPU /usr/local/bin
With systemd, binfmt files are loaded by systemd-binfmt.service
The environment variable HOST_ARCH allows to override 'uname' to generate
configuration files for a different architecture than the current one.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* support instruction syndrome info for data aborts from A64 to EL2
* add HSTR_EL2 register
* fix incorrect ESR IL bits in various syndrome register cases
* virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
* gicv2: RAZ/WI non-sec access to sec interrupts
* i2c: add aspeed i2c controller
* virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
* xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
* xlnx-zynqmp: Support KVM on AArch64 hosts
* ptimer: Various fixes for awkward corner cases
* char: QOMify various ARM UART models
* char: get rid of qemu_char_get_next_serial
* target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
* zynqmp: Add the ZCU102 board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mHQd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20160606-1' into staging
target-arm queue:
* support instruction syndrome info for data aborts from A64 to EL2
* add HSTR_EL2 register
* fix incorrect ESR IL bits in various syndrome register cases
* virt: fix limit of 64-bit ACPI/ECAM PCI MMIO range
* gicv2: RAZ/WI non-sec access to sec interrupts
* i2c: add aspeed i2c controller
* virt: Reject gic-version=host for non-KVM (don't segv on aarch64 host)
* xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
* xlnx-zynqmp: Support KVM on AArch64 hosts
* ptimer: Various fixes for awkward corner cases
* char: QOMify various ARM UART models
* char: get rid of qemu_char_get_next_serial
* target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
* zynqmp: Add the ZCU102 board
# gpg: Signature made Mon 06 Jun 2016 17:01:11 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20160606-1: (25 commits)
zynqmp: Add the ZCU102 board
target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translation
char: get rid of qemu_char_get_next_serial
hw/char: QOM'ify xilinx_uartlite model
hw/char: QOM'ify stm32f2xx_usart model
hw/char: QOM'ify digic-uart model
hw/char: QOM'ify cadence_uart model
hw/char: QOM'ify pl011 model
hw/ptimer: Introduce ptimer_get_limit
hw/ptimer: Support "on the fly" timer mode switch
hw/ptimer: Update .delta on period/freq change
hw/ptimer: Perform counter wrap around if timer already expired
hw/ptimer: Fix issues caused by the adjusted timer limit value
xlnx-zynqmp: Use the in kernel GIC model for KVM runs
xlnx-zynqmp: Delay realization of GIC until post CPU realization
xlnx-zynqmp: Make the RPU subsystem optional
xlnx-zynqmp: Add a secure prop to en/disable ARM Security Extensions
hw/arm/virt: Reject gic-version=host for non-KVM
i2c: add aspeed i2c controller
hw/intc/gic: RAZ/WI non-sec access to sec interrupts
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Most Zynq UltraScale+ users will be targetting and using the ZCU102
board instead of the development focused EP108. To make our QEMU machine
names clearer add a ZCU102 machine model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: cc82eec026b2febfca252d73362bb7084616c1ad.1464213234.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Address size is 40-bit for the AArch32 stage 2 translation,
and t0sz can be negative (from -8 to 7),
so we need to adjust it to use the existing TTBR selecting logic.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
since there is no user of qemu_char_get_next_serial any more,
it's time to let it go away.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-7-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
xilinx_uartlite device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
cadence_uart_device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently ptimer users are used to store copy of the limit value, because
ptimer doesn't provide facility to retrieve the limit. Let's provide it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 8f1fa9f90d8dbf8086fb02f3b4835eaeb4089cf6.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allow switching between periodic <-> oneshot modes while timer is running.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: f030be6e28fbd219e1e8d22297aee367bd9af5bb.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Delta value must be updated on period/freq change, otherwise running timer
would be restarted (counter reloaded with old delta). Only m68k/mcf520x
and arm/arm_timer devices are currently doing freq change correctly, i.e.
stopping the timer. Perform delta update to fix affected devices and
eliminate potential further mistakes.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ptimer_get_count() might be called while QEMU timer already been expired.
In that case ptimer would return counter = 0, which might be undesirable
in case of polled timer. Do counter wrap around for periodic timer to keep
it distributed. In order to achieve more accurate emulation behaviour of
certain hardware, don't perform wrap around when in icount mode and return
counter = 0 in that case (that doesn't affect polled counter distribution).
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Multiple issues here related to the timer with a adjusted .limit value:
1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 0, 1)
4) ptimer_get_count(t) <-- would return 10000 instead of 0
2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 10, 1)
4) ptimer_run(t)
5) ptimer_get_count(t) <-- might return value > 10
3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.
For instance:
1) ptimer_set_period(t, 10000)
2) ptimer_set_limit(t, 1, 0)
3) ptimer_set_period(t, 1) <-- bypass limit correction
Fix all of the above issues by adjusting timer period instead of the limit.
Perform the adjustment for periodic timer only. Use the delta value instead
of the limit to make decision whether adjustment is required, as limit could
be altered while timer is running, resulting in incorrect value returned by
ptimer_get_count.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the in kernel GIC model when running with KVM enabled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Delay the realization of the GIC until after CPUs are
realized. This is needed for KVM as the in-kernel GIC
model will fail if it is realized with no available CPUs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.
Make the RPU optional by adding a has_rpu property and
default to having it disabled.
This changes the default setup from having the RPU to not
longer having it.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.
Default to disabled to match the behavior of KVM.
This changes the default setup from having the ARM Security
Extensions to not longer having them.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.
On the TODO list, we also have :
- improve and harden the state machine.
- bus recovery support (used by the Linux driver).
- transfer mode state machine bits. this is not strictly necessary as
it is mostly used for debug. The bus busy bit is deducted from the
I2C core engine of qemu.
- support of the pool buffer: 2048 bytes of internal SRAM (not used
by the Linux driver).
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
aspeed_i2c_bus_set_state()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the MMIO range limit field to 'base + size - 1' as required.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove some incorrect code from arm_cpu_do_interrupt_aarch64()
which attempts to set the IL bit in the syndrome register based
on the value of env->thumb. This is wrong in several ways:
* IL doesn't indicate Thumb-vs-ARM, it indicates instruction
length (which may be 16 or 32 for Thumb and is always 32 for ARM)
* not every syndrome format uses IL like this -- for some IL is
always set, and for some it is always clear
* the code is changing esr_el[new_el] even for interrupt entry,
which is not supposed to modify ESR_ELx at all
Delete the code, and instead rely on the syndrome value in
env->exception.syndrome having already been set up with the
correct value of IL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org
For some exception syndrome types, the IL bit should always be set.
This includes the instruction abort, watchpoint and software step
syndrome types; add the missing ARM_EL_IL bit to the syndrome
values returned by syn_insn_abort(), syn_swstep() and syn_watchpoint().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1463487258-27468-2-git-send-email-peter.maydell@linaro.org
Add support for generating the ISS (Instruction Specific Syndrome) for
Data Abort exceptions taken from AArch64.
These syndromes are used by hypervisors for example to trap and emulate
memory accesses.
We save the decoded data out-of-band with the TBs at translation time.
When exceptions hit, the extra data attached to the TB is used to
recreate the state needed to encode instruction syndromes.
This avoids the need to emit moves with every load/store.
Based on a suggestion from Peter Maydell.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1462464601-10888-2-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the Hypervisor System Trap Register for EL2.
This register is used early in the Linux boot and without it the kernel
aborts with a "Synchronous Abort" error.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAldVR/QACgkQAvw66wEB28JwVQCgiTy4bpShd9GiFgJ+eoSgJnt5
lLcAn3rnv44g0SpW5M7aK4I8RzyEig0X
=vbbR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
readdir_r() to readdir() conversion, various minor cleanups
# gpg: Signature made Mon 06 Jun 2016 10:52:52 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9p: switch back to readdir()
9p: add locking to V9fsDir
9p: introduce the V9fsDir type
9p: drop useless out: label
9p: drop useless inclusion of hw/i386/pc.h
9p/fsdev: remove obsolete references to virtio
9p: some more cleanup in #include directives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit fcaafb1001 accidentally broke reads from
scsi-disk devices when being updated from its original form to use the new
byte-based block functions. Add the extra missing sector to offset conversion
in order to restore read functionality.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While waiting for a gdb response, or while sending an acknowledgement
there is not much to do, so do not mark the socket as non-blocking to
avoid a busy loop while paused at gdb. This only affects the user-mode
emulation (qemu-arm -g 1234 ./a.out).
Note that this issue was reported before at
https://lists.nongnu.org/archive/html/qemu-devel/2013-02/msg02277.html.
While at it, close the gdb client fd on EOF or error while reading.
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch changes the 9p code to use readdir() again instead of
readdir_r(), which is deprecated in glibc 2.24.
All the locking was put in place by a previous patch.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
If several threads concurrently call readdir() with the same directory
stream pointer, it is possible that they all get a pointer to the same
dirent structure, whose content is overwritten each time readdir() is
called.
We must thus serialize accesses to the dirent structure.
This may be achieved with a mutex like below:
lock_mutex();
readdir();
// work with the dirent
unlock_mutex();
This patch adds all the locking, to prepare the switch to readdir().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
If we are to switch back to readdir(), we need a more complex type than
DIR * to be able to serialize concurrent accesses to the directory stream.
This patch introduces a placeholder type and fixes all users.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Most of the 9p code is now virtio agnostic. This patch does a final cleanup:
- drop references to Virtio from the header comments
- fix includes
Also drop a couple of leading empty lines while here.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
The "9p-attr.h" header isn't needed by 9p synth and virtio 9p.
While here, also drop last references to virtio from 9p synth since it is
now transport agnostic code.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
This patch fixes used-uninitialized false
positive while compiling with ust tracing
backend plus gcc 4.6.3:
hw/net/e1000e.c: In function ‘e1000e_io_write’:
hw/net/e1000e.c:170:39: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
hw/net/e1000e.c: In function ‘e1000e_io_read’:
hw/net/e1000e.c:145:35: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/net/e1000e.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 1465023763-10773-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Store some additional state for cursor and resource backing storage,
so we can write out and reload things. Implement vmsave+vmload for
2d mode. Continue blocking live migration in 3d/virgl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464009727-7753-1-git-send-email-kraxel@redhat.com
vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off. So we can simply exit the loop,
without having to worry about how processing will continue.
Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com
The fifo is normal ram. So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization. Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us. So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com
Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write). Which doesn't help much if the guest
changes the fifo registers afterwards. Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com
The arm target was handled by 06486077, but other targets
were ignored. This handles all the rest which actually support
disassembly (that is, skipping moxie and tilegx).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>