Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This brings a usb audio device to qemu. Output only, fixed at
16bit stereo @ 480000 Hz. Based on a patch from
H. Peter Anvin <hpa@linux.intel.com>
Usage: add '-device usb-audio' to your qemu command line.
Works sorta ok on a idle machine. Known issues:
* Is *very* sensitive to latencies.
* Burns quite some CPU due to usb polling.
In short: It brings the qemu usb emulation to its limits. Enjoy!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for audio endpoints which have two more fields in the
descriptor. Also add support for extra class specific endpoint
descriptors.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move fields from USBHostDevice to USBDevice.
Add bits to usb-desc.c to fill them for emulated devices too.
Also allow to set configuration 0 (== None) for emulated devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes support for parsing /proc/bus/usb/devices for device
discovery. The code lacks a few features compared to the sysfs code and
is also bitrotting as everybody has sysfs these days.
This implies having sysfs mounted is mandatory now to use the usb-host
driver. udev isn't required though. qemu will prefer the udev-managed
device nodes below /dev/bus/usb, but in case this directory isn't preset
qemu will use the device nodes below /proc/bus/usb (default usbfs mount
point).
Bottom line: make sure you have both sysfs and usbfs mounted properly,
and everything should continue to work as it did before.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These two blocks of code are exactly the same, remove one.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ppm_save() spends upwards of 50% of its time doing divisions. Replace them
with shifts.
Reviewed-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The fixes to qapi code generation had multiple bugs:
- the Null class used to drop output was missing some methods
- in some scripts it was never instantiated, leading to a None return,
which is missing even more methods
- the --source and --header options were swapped
Luckily, all those bugs were hidden by a makefile bug which caused the
old behaviour (with the race) to be invoked.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- Send EOP flags to the out channels.
- Send data descriptor metadata to the out channels.
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
SSE rounding and flush to zero control has never been implemented. However
given that softfloat-native was using a single state for FPU and SSE and
given that glibc is setting both FPU and SSE state in fesetround(), this
was working correctly up to the switch to softfloat.
Fix that by adding an update_sse_status() function similar to
update_fpu_status(), and callin git on write to mxcsr.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers implemented dpps and dppd SSE instructions are not passing
the correct argument types to the softfloat functions. While they do
work anyway providing a correct behaviour, this patch fixes that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
roundps and roundss SSE2 instructions have been broken when switching
target-i386 to softfloat. They use float64_round_to_int to convert a
float32, and while the implicit conversion from float32 to float64 was
correct for softfloat-native, it is not for pure softfloat. Fix that by
using the correct registers and correct functions.
Also fix roundpd and roundsd implementation at the same time, even if
these functions are behaving correctly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
minpd, minps, minsd, minss and maxpd, maxps, maxsd, maxss SSE2
instructions have been broken when switching target-i386 to softfloat.
It's not possible to use comparison instructions on float types anymore
to softfloat, so use the floatXX_lt function instead, as the
float_XX_min and float_XX_max functions can't be used due to the Intel
specific behaviour.
As it implements the correct NaNs behaviour, let's remove the
corresponding entry from the TODO.
It fixes GDM screen display on Debian Lenny.
Thanks to Peter Maydell and Jason Wessel for their analysis of the
problem.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Coverity says that the division by sizeof(*s->rate) might be wrong.
I think that coverity is right.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Coverity complained about local variable key which was only partially
initiated. Only key.st_value was set. As this was also the only part
of key which was used in function symfind, the code could be optimized
by directly passing a pointer to orig_addr.
In bsd-user/elfload.c, fix ec822001a2
was missing. This was a simple replacement of > by >= in symfind, so
I fixed it here without creating an additional patch.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Use the new memory mutator API to simplify the flash remap code;
this allows us to drop the flash_mapped flag.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Fix the sense of the REMAP bit: 0 should mean "map flash",
1 should mean "map RAM".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390: fix cpu hotplug / cpu activity on interrupts
s390x: add TR function for EXECUTE
Expose drive_add on all architectures
Add generic drive hotplugging
Compile device-hotplug on all targets
[S390] Add hotplug support
When compiling qemu statically with multilib on PPC, we hit the
same issue that commit 845f2c2812
is fixing. Do the same here.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ocbp and ocbwb controls the writeback of a cache line to memory. They
are supposed to do nothing in case of a cache miss. Given QEMU only
partially emulate caches, it is safe to ignore these instructions.
This fixes a kernel oops when trying to access an rtl8139 NIC with
recent versions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ARM, in Thumb mode r7 is used for the framepointer; this meant
that we would fail to compile in debug mode because we were using r7
for TCG_AREG0. Shift to r6 instead to avoid this clash.
(Bug reported as LP:870990.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
The old code used sizeof(const struct cris_opcode **) where it should
have used sizeof(const struct cris_opcode *). As both sizes give the
same value, the resulting binary was ok, but static code analyzers
like coverity and clang complained.
This is fixed here, and the code is also simplified by using g_new0.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
vhost memory management doesn't care about non-memory (e.g. PIO) or non-RAM
regions. Adjust the filtering to reflect that, and move it earlier so it
applies to mem_sections too.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
A memset() used to delete an entry in an array did not take into account
the array element's size.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
MemoryListener::region_add() gives us a slice of a MemoryRegion, not a
region. Adjust the userspace address to reflect that.
Signed-off-by: Avi Kivity <avi@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
rom/device regions have a ram_addr that is composed of both an I/O handler
(low bits) and RAM region (high bits); but qemu_ram_set_idstr() expects just
a RAM region. Mask the I/O handler to make it happy.
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit a621f38de8 (Direct dispatch
through MemoryRegion) moved byte swaps to a central function.
Add a missing break, so that long-sized byte swaps don't abort.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Since commit be675c9720 (memory: move
endianness compensation to memory core) it was checking for
TARGET_BIG_ENDIAN instead of TARGET_WORDS_BIGENDIAN, thereby not
swapping correctly for Big Endian targets.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit c5705a772 ("vmstate, memory: decouple vmstate from memory API") changed
the signature of memory_region_init_ram_ptr() but did not update a caller in
the ppc kvm module. Fix.
Signed-off-by: Avi Kivity <avi@redhat.com>
* 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
arm: add dummy A9-specific cp15 registers
target-arm: Ignore attempts to set invalid modes in CPSR
target-arm: Don't use cpu_single_env in bank_number()
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Add description for the Freescale e500mc core.
pseries: Check for duplicate addresses on the spapr-vio bus
pseries: Populate "/chosen/linux,stdout-path" in the FDT
pseries: Add a routine to find a stable "default" vty and use it
pseries: Emit device tree nodes in reg order
pseries: FDT NUMA extensions to support multi-node guests
pseries: Remove hcalls callback
kvm-ppc: halt secondary cpus when guest reset
console: Fix segfault on screendump without VGA adapter
PPC: monitor: add ability to dump SLB entries