Calculate the max packet size correctly. Only bits 0..11 specify the size,
bits 11+12 specify the number of (highspeed) microframes the endpoint wants
to use.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add support for splitting large transfers into multiple smaller ones.
This is needed for the upcoming EHCI emulation which allows guests
to submit requests up to 20k in size. The linux kernel allows 16k
max size though.
Based on a patch from David Ahern, see
http://www.mail-archive.com/qemu-devel@nongnu.org/msg30337.html
Cc: David Ahern <daahern@cisco.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Lookup async urbs which are to be canceled using the linked list
instead of the direct opaque pointer. There are two reasons we
are doing that: First, to avoid the opaque poiner to the callback,
which is needed for upcoming cleanups. Second, because we might
need multiple urbs per request for highspeed support, so a single
opaque pointer doesn't cut it any more anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds code to track all async urbs in a linked list,
so we can find them without having to pass around a opaque
pointer to them. Prerequisite for the cleanups.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a hostport property which allows to specify the host usb
devices to pass through by bus number and physical port. This means you
can basically hand over one (or more) of the usb plugs on your host to
the guest and whatever device is plugged in there will show up in the
guest.
Usage:
-device usb-host,hostbus=1,hostport=1
You can figure the port numbers by plugging in some usb device, then
find it in "info usbhost" and pick bus and port specified there.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The device path isn't just a number. It specifies the physical port
the device is connected to and in case the device is connected via
usb hub you'll have two numbers there, like this: "5.1". The first
specifies the root port where the hub is plugged into, the second
specifies the port number of the hub where the device is plugged in.
With multiple hubs chained the string can become longer.
This patch renames devpath to port and makes it a string. It also
adapts the sysfs parsing code accordingly. The parser code is also more
strict now and skips the root hubs (which can't be assigned anyway).
The "info usbhost" monitor command now prints bus number, (os-assigned)
device address and physical port for each device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make the linux usb host passthrough code use the usb_generic_handle_packet()
function, rather then the curent DYI code. This removes 200 lines of almost
identical code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This allows using the generic usb_generic_handle_packet function from
device code which does ASYNC control requests (such as the linux host
pass through code).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
UHCI host controller status register indicates error and
an interrupt is triggered on BABBLE and STALL errors.
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is used for some devices that have multiple interfaces that form a logic
device. An example is Video Class, which has a Control interface and a
Streaming interface. There can be additional interfaces on the same (physical)
devices (e.g. a microphone), and Interface Association Descriptor handles this
case.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Previously we relied on the .bNumInterfaces, but that won't always be
accurate after the introduction of grouped interfaces.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The --disable-slirp option was undocumented; add it to configure's
--help output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a preprocessor #define which is never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the input to a Neon float comparison is a quiet NaN, the ARM ARM
specifies that we should raise InvalidOp if the comparison is GE or GT
but not for EQ. (Signaling NaNs raise InvalidOp regardless). This means
only EQ should use the _quiet version of the comparison function.
We implement this by cleaning up the comparison helpers to call the
appopriate versions of the softfloat simple comparison functions
(float32_le and friends) rather than the generic float32_compare functions.
This makes them simple enough that they are clearer opencoded rather
than macroised.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon versions of int-float conversions must use the "standard FPSCR"
rather than the default FPSCR. Implement this by having the helper
functions take a pointer to the appropriate float_status value rather
than simply taking a pointer to the entire CPUState, and making
translate.c pass a pointer to vfp.fp_status or vfp.standard_fp_status
appropriately for whether the instruction being translated is Neon
or VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ARM the architecture mandates that when an output denormal is flushed to
zero we must set the FPSCR UFC (underflow) bit, so map softfloat's
float_flag_output_denormal accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a new float_flag_output_denormal which is set when the result
of a floating point operation would be denormal but is flushed to
zero because we are in flush_to_zero mode. This is necessary because
some architectures signal this condition as an underflow and others
signal it as an inexact result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers for VRECPE.F32, VSQRTE.F32, VRECPS and VRSQRTS handle denormals
as special cases, so we must set the InputDenormal exception flag ourselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functions which do the core estimation algorithms for the VRSQRTE
and VRECPE instructions should not set floating point exception flags,
so use a local fp status for doing these calculations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If an op with dead outputs is not removed, because it has side effects
or has multiple output and only one dead, mark the registers as dead
instead of saving them. This avoid a few register spills on TCG targets
with low register count, especially with div2 and mul2 ops, or when a
qemu_ld* result is not used (prefetch emulation for example).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If an op is not removed and has dead output arguments, mark it
in op_dead_args similarly to what is done for input arguments.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow all args to be dead by replacing the input specific op_dead_iargs
variable by op_dead_args. Note this is a purely mechanical change.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
Fix a bug in mtsr/mtsrin emulation on ppc64
pSeries: Clean up write-only variables
w32: Fix compilation and replace non-portable usage of ulong
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390x: complain when allocating ram fails
s390x: fix memory detection for guests > 64GB
s390x: change mapping base to allow guests > 2GB
s390x: Fix debugging for unknown sigp order codes
s390x: build s390x by default
s390x: remove compatibility cc field
s390x: Adjust GDB stub
s390x: translate engine for s390x CPU
s390x: Adjust internal kvm code
s390x: Implement opcode helpers
s390x: helper functions for system emulation
s390x: Shift variables in CPUState for memset(0)
s390x: keep hint on virtio managing size
s390x: make kvm exported functions conditional on kvm
s390x: s390x-linux-user support
tcg: extend max tcg opcodes when using 64-on-32bit
s390x: fix smp support for kvm
The SDIO specification introduces new commands 52 and 53.
Handle as illegal command but do not complain on stderr,
as SDIO-aware OSes (including Linux) may legitimately use
these in their probing for presence of an SDIO card.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove a duplicate #include of sysbus.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If pic_irq is greater than 7, the irq level is always 0 on 32bits.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Early ppc64 CPUs include a hack to partially simulate the ppc32 segment
registers, by translating writes to them into writes to the SLB. This is
not used by any current Linux kernel, but it is used by the openbios used
in the qemu mac99 model.
Commit 81762d6dd0, cleaning up the SLB
handling introduced a bug in this code, breaking the openbios currently in
qemu. Specifically, there was an off by one error bitshuffling the
register format used by mtsr into the format needed for the SLB load,
causing the flag bits to end up in the wrong place. This caused the
storage keys to be wrong under openbios, meaning that the translation code
incorrectly thought a legitimate access was a permission violation.
This patch fixes the bug, at the same time it fixes some build bug in the
MMU debugging code (only exposed when DEBUG_MMU is enabled).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
A few pieces of the pSeries emulation code have variables which are set
but never used, which causes warnings on gcc 4.6. This patch removes
these instances.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
ulong is undefined for w32 (and maybe other) compilations.
Replace it by uintptr_t (which also fixes compilation for w64
and is a better choice for pointer to integer conversions).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
While trying out the > 64GB guest RAM patch, I hit some virtual address
limitations of my host system, which resulted in mmap failing. Unfortunately,
qemu didn't tell me about this failure, but just used the NULL pointer
happily, resulting in either segmentation faults or other fun errors.
To spare other users from tracing this down, let's print a nice message
instead so the user can figure out what's wrong from there.
Signed-off-by: Alexander Graf <agraf@suse.de>
the s390 memory detection has a 16bit field that specifies the amount of
increments. This patch adopts the memory size to always fit into that
scheme. This also fixes virtio detection for these guests, since the
descriptor page is located after the main memory.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
the current s390x qemu memory layout is
0x1000000: guest start
0x80000000: qemu binary
which limits the amount of available memory to <2GB.
This patch moves the guest pages to 32GB to not collide with the binary
and to leave some space for the program break of qemu.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On unknown sigp order codes we print a debug message. This patch
fixes the output, since we want to see the order_code and not
the register numbers.
Patch applies on agraf tree.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have successfully lazilized cc computation, so we need to manually
trigger its calculation when gdb wants to fetch it. We also changed the
variable name, so writing it writes into a different field now.
Signed-off-by: Alexander Graf <agraf@suse.de>
This is the main meat part of the patch set. It implements emulation for an
s390x CPU.
The code does all the optimizations that are common for TCG code:
- direct branches
- cc optimization
- unrolling of simple microcode loops
I'm still open for suggestions on speedups of course :).
Signed-off-by: Alexander Graf <agraf@suse.de>
We're now finally emulating an s390x CPU, so we can move quite some logic
from the kvm code out into generic CPU code.
This patch does this and adjusts the interfaces according to what the code
around now expects to be able to call.
Signed-off-by: Alexander Graf <agraf@suse.de>
There are some instructions that can't (or shouldn't) be expressed by pure
tcg code. For those, we call into externally compiled C functions.
This patch implements those C functions.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running system emulation, we need to transverse through the MMU and
deliver interrupts according to the specification.
This patch implements those two pieces and in addition adjusts the CPU
initialization code to account for the new fields in CPUState.
Signed-off-by: Alexander Graf <agraf@suse.de>
The default reset handler does a memset(0) until right in between CPU_COMMON.
I incorrectly changed that behavior on the s390x port, so let's move the fields
in CPUState around to reflect the correct split up to which point memset(0)
zeros out everything.
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390x virtio bus keeps management information on virtio after the top
of the guest's RAM. We need to be able to tell the guest the size of its
RAM (without virtio stuff), but also be able to trap when the guest accesses
RAM outside of its scope (including virtio stuff).
So we need a variable telling us the size of the virtio stuff, so we can
calculate the highest available RAM address from that.
While at it, also increase the maximum number of virtio pages, so we play
along well with more recent kernels that spawn a ridiculous number of virtio
console adapters.
Signed-off-by: Alexander Graf <agraf@suse.de>
We have some helper functions we use to directly invoke KVM
functionality from device emulation code.
This patch replaces those exported functions with static inline
stubs when not building with KVM enabled.
Signed-off-by: Alexander Graf <agraf@suse.de>