in current impl. condition
build_madt() {
...
if (test_bit(i, cpuinfo->found_cpus))
is always true since loop handles only present CPUs
in range [0..smp_cpus).
But to fill usless cpuinfo->found_cpus we do unnecessary
scan over QOM tree to find the same CPUs.
So mark GICC as present always and drop not needed
code that fills cpuinfo->found_cpus.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1454323689-248759-1-git-send-email-imammedo@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the inputsize > pamax check for Stage 2 translations.
This is CONSTRAINED UNPREDICTABLE and we choose to fault.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename check_s2_startlevel to check_s2_mmu_setup in preparation
for additional checks.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The S2 starting level table size check applies to both AArch32
and AArch64. Move it to common code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453932970-14576-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting Linux on AArch64 enabled cores, setup EL1 and
EL2 to use AArch64.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 system registers DACR32_EL2, IFSR32_EL2, SPSR_IRQ,
SPSR_ABT, SPSR_UND and SPSR_FIQ are visible and fully functional from
EL3 even if the CPU has no EL2 (unlike some others which are RES0
from EL3 in that configuration). Move them from el2_cp_reginfo[] to
v8_cp_reginfo[] so they are always present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1453227802-9991-1-git-send-email-peter.maydell@linaro.org
This patch is the ACPI equivalent of "hw/arm/virt: Add always-on
property to the virt board timer". The timer is always on, and
thus setting this informs Linux that it may switch off the periodic
timer. Switching off the periodic timer substantially reduces the
number of interrupts the host needs to inject.
Testing note: AArch64 guests (the only ones currently booting with
ACPI) do not actually need this patch to determine it can turn the
periodic timer off. I therefore used a hacked guest kernel to ensure
this patch works as the equivalent DT patch does.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1453380893-26174-1-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
So we can stop rendering for a while in case we have to.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
We'll go take out the commands we receive out of the virt queue and put
them into a linked list, to decouple virtio queue handling from actual
command processing.
Also move cmd processing to new virtio_gpu_handle_ctrl func, so we can
easily kick it from different places.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Found by Coverity Scan, buf not freed on error.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Allow gl user interfaces to block display device gl rendering.
The ui code might want to do that in case it takes a little
longer to bring things to screen, for example because we'll
hand over a dma-buf to another process (spice will do that).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Drop leftover prototype which sneaked in by mistake
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
When processing 'sendkey' command, hmp_sendkey routine null
terminates the 'keyname_buf' array. This results in an OOB
write issue, if 'keyname_len' was to fall outside of
'keyname_buf' array.
Since the keyname's length is known the keyname_buf can be
removed altogether by adding a length parameter to
index_from_key() and using it for the error output as well.
Reported-by: Ling Liu <liuling-it@360.cn>
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20160113080958.GA18934@olga>
[Comparison with "<" dumbed down, test for junk after strtoul()
tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWsOYgAAoJEDuxQgLoOKyt/DUH/1hIzxS+qyh3iko0B5O0aWny
PJObgy4004T9yClYDOPRvoNfoFAw63iOkfnMArnzTETEaPR94DJXYM0uTLY8Pyht
wNcAZm44FlYKhEOOXqFslE6Z1arOR2s2wTYGn4s6BvkGbGlHCWr7N7n5trMpLAMJ
/jAT+PNAgJrxlI/vVDeitFhQYABwXmBdPpf1kgn28IepBAI62de1rJubX27WoWuQ
j1+VwhbKCWFwE4PqDHVVo2Wm+Gv5A53alB6Adpx6+5xXYLWBBq/nNg1SwDXfD0+q
gk7Qiwso+7fFWMX6mx2qgvdXBI2R4NlLoQAzA6sjWF1v4hf76/wjNQLsg+1+qXo=
=BEb2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-for-peter-2016-02-02' into staging
Block patches
# gpg: Signature made Tue 02 Feb 2016 17:23:44 GMT using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* remotes/maxreitz/tags/pull-block-for-peter-2016-02-02: (50 commits)
block: qemu-iotests - add test for snapshot, commit, snapshot bug
block: set device_list.tqe_prev to NULL on BDS removal
iotests: Add "qemu-img map" test for VMDK extents
qemu-img: Make MapEntry a QAPI struct
qemu-img: In "map", use the returned "file" from bdrv_get_block_status
block: Use returned *file in bdrv_co_get_block_status
vmdk: Return extent's file in bdrv_get_block_status
vmdk: Fix calculation of block status's offset
vpc: Assign bs->file->bs to file in vpc_co_get_block_status
vdi: Assign bs->file->bs to file in vdi_co_get_block_status
sheepdog: Assign bs to file in sd_co_get_block_status
qed: Assign bs->file->bs to file in bdrv_qed_co_get_block_status
parallels: Assign bs->file->bs to file in parallels_co_get_block_status
iscsi: Assign bs to file in iscsi_co_get_block_status
raw: Assign bs to file in raw_co_get_block_status
qcow2: Assign bs->file->bs to file in qcow2_co_get_block_status
qcow: Assign bs->file->bs to file in qcow_co_get_block_status
block: Add "file" output parameter to block status query functions
block: acquire in bdrv_query_image_info
iotests: Add test for block jobs and BDS ejection
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a regression introduced with commit 3f09bfbc7. Multiple
bugs arise in conjunction with live snapshots and mirroring operations
(which include active layer commit).
After a live snapshot occurs, the active layer and the base layer both
have a non-NULL tqe_prev field in the device_list, although the base
node's tqe_prev field points to a NULL entry. This non-NULL tqe_prev
field occurs after the bdrv_append() in the external snapshot calls
change_parent_backing_link().
In change_parent_backing_link(), when the previous active layer is
removed from device_list, the device_list.tqe_prev pointer is not
set to NULL.
The operating scheme in the block layer is to indicate that a BDS belongs
in the bdrv_states device_list iff the device_list.tqe_prev pointer
is non-NULL.
This patch does two things:
1.) Introduces a new block layer helper bdrv_device_remove() to remove a
BDS from the device_list, and
2.) uses that new API, which also fixes the regression once used in
change_parent_backing_link().
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 0cd51e11c0666c04ddb7c05293fe94afeb551e89.1454376655.git.jcody@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The "flags" bit mask is expanded to two booleans, "data" and "zero";
"bs" is replaced with "filename" string.
Refactor the merge conditions in img_map() into entry_mergeable().
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-16-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now all drivers should return a correct "file", we can make use of it,
even with the recursion into backing chain above.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-15-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that all drivers return the right "file" pointer, we can use it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1453780743-16806-14-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
"offset" is the offset of cluster and sector_num doesn't necessarily
refer to the start of it, it should add index_in_cluster.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-12-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The added parameter can be used to return the BDS pointer which the
valid offset is referring to. Its value should be ignored unless
BDRV_BLOCK_OFFSET_VALID in ret is set.
Until block drivers fill in the right value, let's clear it explicitly
right before calling .bdrv_get_block_status.
The "bs->file" condition in bdrv_co_get_block_status is kept now to keep iotest
case 102 passing, and will be fixed once all drivers return the right file
pointer.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1453780743-16806-2-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test for having multiple BlockBackends in one BDS tree. In
this case, there is one BB for the protocol BDS and one BB for the
format BDS in a simple two-BDS tree (with the protocol BDS and BB added
first).
When bdrv_close_all() is executed, no cached data from any BDS should be
lost; the protocol BDS may not be closed until the format BDS is closed.
Otherwise, metadata updates may be lost.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch rewrites bdrv_close_all(): Until now, all root BDSs have been
force-closed. This is bad because it can lead to cached data not being
flushed to disk.
Instead, try to make all reference holders relinquish their reference
voluntarily:
1. All BlockBackend users are handled by making all BBs simply eject
their BDS tree. Since a BDS can never be on top of a BB, this will
not cause any of the issues as seen with the force-closing of BDSs.
The references will be relinquished and any further access to the BB
will fail gracefully.
2. All BDSs which are owned by the monitor itself (because they do not
have a BB) are relinquished next.
3. Besides BBs and the monitor, block jobs and other BDSs are the only
things left that can hold a reference to BDSs. After every remaining
block job has been canceled, there should not be any BDSs left (and
the loop added here will always terminate (as long as NDEBUG is not
defined), because either all_bdrv_states will be empty or there will
not be any block job left to cancel, failing the assertion).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When bdrv_close_all() is called, instead of force-closing all root
BlockDriverStates, it is better to just drop the reference from all
BlockBackends and let them be closed automatically. This prevents BDS
from getting closed that are still referenced by other BDS, which may
result in loss of cached data.
This patch adds a function for doing that, but does not yet incorporate
it in bdrv_close_all().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a side effect, we can now make x-blockdev-del's check whether a BDS
is actually owned by the monitor explicit.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We need this list so that bdrv_close_all() can keep track of which BDSs
are still open after having removed the BDSs from all of the BBs and
having released all monitor BDS references.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are no users of bdrv_close() left, except for one of bdrv_open()'s
failure paths, bdrv_close_all() and bdrv_delete(), and that is good.
Make bdrv_close() static so nobody makes the mistake of directly using
bdrv_close() again.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It is unused now, so we can remove it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The NBD code uses the BDS close notifier to determine when a medium is
ejected. However, now it should use the BB's BDS removal notifier for
that instead of the BDS's close notifier.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the BDS-BB removal and insertion notifiers to remove or set
up, respectively, virtio-scsi's op blockers.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Put the code for setting up and removing op blockers into an own
function, respectively. Then, we can invoke those functions whenever a
BDS is removed from an virtio-blk BB or inserted into it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>