Now that the CMSDK APB watchdog uses its Clock input, it will
correctly respond when the system clock frequency is changed using
the RCC register on in the Stellaris board system registers. Test
that when the RCC register is written it causes the watchdog timer to
change speed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-22-peter.maydell@linaro.org
Message-id: 20210121190622.22000-22-peter.maydell@linaro.org
Add a simple test of the CMSDK dual timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20210128114145.20536-6-peter.maydell@linaro.org
Message-id: 20210121190622.22000-6-peter.maydell@linaro.org
Add a simple test of the CMSDK watchdog, since we're about to do some
refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-5-peter.maydell@linaro.org
Message-id: 20210121190622.22000-5-peter.maydell@linaro.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Add a simple test of the CMSDK APB timer, since we're about to do
some refactoring of how it is clocked.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210128114145.20536-4-peter.maydell@linaro.org
Message-id: 20210121190622.22000-4-peter.maydell@linaro.org
Add a test case for pvpanic-pci device. The scenario is the same as pvpanic
ISA device, but is using the PCI bus.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
[PMM: added code to free dev and pcibus, which the oss-fuzz
build otherwise complains about as a leak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To ease the PCI device addition in next patches, split the code as follows:
- generic code (read/write/setup) is being kept in pvpanic.c
- ISA dependent code moved to pvpanic-isa.c
Also, rename:
- ISA_PVPANIC_DEVICE -> PVPANIC_ISA_DEVICE.
- TYPE_PVPANIC -> TYPE_PVPANIC_ISA.
- MemoryRegion io -> mr.
- pvpanic_ioport_* in pvpanic_*.
Update the build system with the new files and config structure.
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix potential overflow problem when calculating pwm_duty.
1. Ensure p->cmr and p->cnr to be from [0,65535], according to the
hardware specification.
2. Changed duty to uint32_t. However, since MAX_DUTY * (p->cmr+1)
can excceed UINT32_MAX, we convert them to uint64_t in computation
and converted them back to uint32_t.
(duty is guaranteed to be <= MAX_DUTY so it won't overflow.)
Fixes: CID 1442342
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Doug Evans <dje@google.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210127011142.2122790-1-wuhaotsh@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The properties to attach a CANBUS object to the xlnx-zcu102 machine have
a period in them. We want to use periods in properties for compound QAPI types,
and besides the "xlnx-zcu102." prefix is both unnecessary and different
from any other machine property name. Remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210118162537.779542-1-pbonzini@redhat.com
Reviewed-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
-----BEGIN PGP SIGNATURE-----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=gFsg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Fix crash on write to read-only devices
- iotests: Rewrite 'check' in Python, get rid of 'groups' and allow
non-numeric test case names
# gpg: Signature made Wed 27 Jan 2021 19:56:00 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
iotests: rename and move 169 and 199 tests
iotests: rewrite check into python
iotests: add testrunner.py
iotests: add testenv.py
iotests: add findtests.py
iotests: 146: drop extra whitespaces from .out file
virtio-scsi-test: Test writing to scsi-cd device
block: Separate blk_is_writable() and blk_supports_write_perm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This tests that trying to write to a (read-only) scsi-cd device backed
by a read-write image file doesn't crash and results in the correct
error.
This is a regression test for https://bugs.launchpad.net/bugs/1906693.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210118123448.307825-3-kwolf@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qtest_rsp() is used in two different ways: (1) return some arguments
to caller, which the caller must free, and (2) return no arguments to
caller. Passing non-zero @expected_args gets you (1), and passing
zero gets you (2).
Having "the return value must be freed" depend on an argument this way
is less than ideal.
Provide separate functions for the two ways: (1) qtest_rsp_args()
takes @expected_args (possibly zero), and returns that number of
arguments. Caller must free the return value always. (2) qtest_rsp()
assumes zero, and returns nothing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20210126151649.2220902-1-armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch fixes the following memory leak detected by asan:
Indirect leak of 560320 byte(s) in 136 object(s) allocated from:
#0 0x556b3b3f9b57 in calloc (/home/stefanb/tmp/qemu-tip/build/tests/qtest/tpm-crb-swtpm-test+0x23fb57)
#1 0x152b0e96b9b0 in g_malloc0 (/lib64/libglib-2.0.so.0+0x589b0)
#2 0x556b3b588f61 in parse_object /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:318:12
#3 0x556b3b588f61 in parse_value /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:546:16
#4 0x556b3b5886e8 in json_parser_parse /home/stefanb/tmp/qemu-tip/build/../qobject/json-parser.c:580:14
#5 0x556b3b52ff4a in json_message_process_token /home/stefanb/tmp/qemu-tip/build/../qobject/json-streamer.c:92:12
#6 0x556b3b59896f in json_lexer_feed_char /home/stefanb/tmp/qemu-tip/build/../qobject/json-lexer.c:313:13
#7 0x556b3b598443 in json_lexer_feed /home/stefanb/tmp/qemu-tip/build/../qobject/json-lexer.c:350:9
#8 0x556b3b436c70 in qmp_fd_receive /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:614:9
#9 0x556b3b435871 in qtest_qmp_receive_dict /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:636:12
#10 0x556b3b435871 in qtest_qmp_receive /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:624:27
#11 0x556b3b435c59 in qtest_vqmp /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:715:12
#12 0x556b3b435c59 in qtest_qmp /home/stefanb/tmp/qemu-tip/build/../tests/qtest/libqtest.c:756:16
#13 0x556b3b4328c7 in tpm_util_wait_for_migration_complete /home/stefanb/tmp/qemu-tip/build/../tests/qtest/tpm-util.c:245:15
#14 0x556b3b4333be in tpm_test_swtpm_migration_test /home/stefanb/tmp/qemu-tip/build/../tests/qtest/tpm-tests.c:117:5
#15 0x152b0e98e29d (/lib64/libglib-2.0.so.0+0x7b29d)
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210115204637.3332555-1-stefanb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The pwm_qom_get function didn't free "response", which caused an indirect
memory leak. So use qobject_unref() to fix it.
ASAN shows memory leak stack:
Indirect leak of 74160000 byte(s) in 18000 object(s) allocated from:
#0 0x7f96e2f79d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f96e2d98a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x556313112180 in qdict_new ../qobject/qdict.c:30
#3 0x556313115bca in parse_object ../qobject/json-parser.c:318
#4 0x556313117810 in parse_value ../qobject/json-parser.c:546
#5 0x556313117bda in json_parser_parse ../qobject/json-parser.c:580
#6 0x55631310fe67 in json_message_process_token ../qobject/json-streamer.c:92
#7 0x5563131210b7 in json_lexer_feed_char ../qobject/json-lexer.c:313
#8 0x556313121662 in json_lexer_feed ../qobject/json-lexer.c:350
#9 0x5563131101e9 in json_message_parser_feed ../qobject/json-streamer.c:121
#10 0x5563130cb81e in qmp_fd_receive ../tests/qtest/libqtest.c:614
#11 0x5563130cba2b in qtest_qmp_receive_dict ../tests/qtest/libqtest.c:636
#12 0x5563130cb939 in qtest_qmp_receive ../tests/qtest/libqtest.c:624
#13 0x5563130cbe0d in qtest_vqmp ../tests/qtest/libqtest.c:715
#14 0x5563130cc40f in qtest_qmp ../tests/qtest/libqtest.c:756
#15 0x5563130c5623 in pwm_qom_get ../tests/qtest/npcm7xx_pwm-test.c:180
#16 0x5563130c595e in pwm_get_duty ../tests/qtest/npcm7xx_pwm-test.c:210
#17 0x5563130c7529 in test_toggle ../tests/qtest/npcm7xx_pwm-test.c:447
Reported-by: Euler Robot <euler.robot@huawei.com>
Message-Id: <20210115075634.717909-1-ganqixin@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As per POSIX specification of limits.h [1], OS libc may define
PAGE_SIZE in limits.h.
Self defined PAGE_SIZE is frequently used in tests, to prevent
collosion of definition, we give PAGE_SIZE definitons reasonable
prefixs.
[1]: https://pubs.opengroup.org/onlinepubs/7908799/xsh/limits.h.html
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210118063808.12471-7-jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The adc_qom_set function didn't free "response", which caused an indirect
memory leak. So use qobject_unref() to fix it.
ASAN shows memory leak stack:
Indirect leak of 593280 byte(s) in 144 object(s) allocated from:
#0 0x7f9a5e7e8d4e in __interceptor_calloc (/lib64/libasan.so.5+0x112d4e)
#1 0x7f9a5e607a50 in g_malloc0 (/lib64/libglib-2.0.so.0+0x55a50)
#2 0x55b1bebf636b in qdict_new ../qobject/qdict.c:30
#3 0x55b1bec09699 in parse_object ../qobject/json-parser.c:318
#4 0x55b1bec0b2df in parse_value ../qobject/json-parser.c:546
#5 0x55b1bec0b6a9 in json_parser_parse ../qobject/json-parser.c:580
#6 0x55b1bec060d1 in json_message_process_token ../qobject/json-streamer.c:92
#7 0x55b1bec16a12 in json_lexer_feed_char ../qobject/json-lexer.c:313
#8 0x55b1bec16fbd in json_lexer_feed ../qobject/json-lexer.c:350
#9 0x55b1bec06453 in json_message_parser_feed ../qobject/json-streamer.c:121
#10 0x55b1bebc2d51 in qmp_fd_receive ../tests/qtest/libqtest.c:614
#11 0x55b1bebc2f5e in qtest_qmp_receive_dict ../tests/qtest/libqtest.c:636
#12 0x55b1bebc2e6c in qtest_qmp_receive ../tests/qtest/libqtest.c:624
#13 0x55b1bebc3340 in qtest_vqmp ../tests/qtest/libqtest.c:715
#14 0x55b1bebc3942 in qtest_qmp ../tests/qtest/libqtest.c:756
#15 0x55b1bebbd64a in adc_qom_set ../tests/qtest/npcm7xx_adc-test.c:127
#16 0x55b1bebbd793 in adc_write_input ../tests/qtest/npcm7xx_adc-test.c:140
#17 0x55b1bebbdf92 in test_convert_external ../tests/qtest/npcm7xx_adc-test.c:246
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210118065627.79903-1-ganqixin@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The crypto overhead of emulating pauth can be significant for
some workloads. Add two boolean properties that allows the
feature to be turned off, on with the architected algorithm,
or on with an implementation defined algorithm.
We need two intermediate booleans to control the state while
parsing properties lest we clobber ID_AA64ISAR1 into an invalid
intermediate state.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210111235740.462469-3-richard.henderson@linaro.org
[PMM: fixed docs typo, tweaked text to clarify that the impdef
algorithm is specific to QEMU]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No matter whether the pxb is enabled or not, the CONFIG_PXB macro in test
would keep undefined. And since pxb is now enabled for ARM Virt machine
by default, let's enable pxb unit-test by removing the CONFIG_PXB.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-8-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20210114100643.10617-2-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We add a qtest for the PWM in the previous patch. It proves it works as
expected.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210108190945.949196-6-wuhaotsh@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC is part of NPCM7XX Module. Its behavior is controled by the
ADC_CON register. It converts one of the eight analog inputs into a
digital input and stores it in the ADC_DATA register when enabled.
Users can alter input value by using qom-set QMP command.
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Message-id: 20210108190945.949196-4-wuhaotsh@google.com
[PMM: Added missing hw/adc/trace.h file]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Prior to this patch, the fuzzer found inputs to map PCI device BARs and
enable the device. While it is nice that the fuzzer can do this, it
added significant overhead, since the fuzzer needs to map all the
BARs (regenerating the memory topology), at the start of each input.
With this patch, we do this once, before fuzzing, mitigating some of
this overhead.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201221181203.1853-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When the length of mname is less than 5, memcpy("xenfv", mname, 5) will cause
heap buffer overflow. Therefore, use strncmp to avoid this problem.
The asan showed stack:
ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200000f2f4 at
pc 0x7f65d8cc2225 bp 0x7ffe93cc5a60 sp 0x7ffe93cc5208 READ of size 5 at
0x60200000f2f4 thread T0
#0 0x7f65d8cc2224 in memcmp (/lib64/libasan.so.5+0xdf224)
#1 0x5632c20be95b in qtest_cb_for_every_machine tests/qtest/libqtest.c:1282
#2 0x5632c20b7995 in main tests/qtest/test-hmp.c:160
#3 0x7f65d88fed42 in __libc_start_main (/lib64/libc.so.6+0x26d42)
#4 0x5632c20b72cd in _start (build/tests/qtest/test-hmp+0x542cd)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210106050625.518041-1-ganqixin@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
On the pc-i440fx machine, the floppy drive relies on the i8257 DMA
controller. Add this device to the floppy fuzzer config, and silence the
warning about a missing format specifier for the null-co:// drive.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201216203328.41112-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In using the address_space_translate_internal API, address_space_cache_init
forgot one piece of advice that can be found in the code for
address_space_translate_internal:
/* MMIO registers can be expected to perform full-width accesses based only
* on their address, without considering adjacent registers that could
* decode to completely different MemoryRegions. When such registers
* exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO
* regions overlap wildly. For this reason we cannot clamp the accesses
* here.
*
* If the length is small (as is the case for address_space_ldl/stl),
* everything works fine. If the incoming length is large, however,
* the caller really has to do the clamping through memory_access_size.
*/
address_space_cache_init is exactly one such case where "the incoming length
is large", therefore we need to clamp the resulting length---not to
memory_access_size though, since we are not doing an access yet, but to
the size of the resulting section. This ensures that subsequent accesses
to the cached MemoryRegionSection will be in range.
With this patch, the enclosed testcase notices that the used ring does
not fit into the MSI-X table and prints a "qemu-system-x86_64: Cannot map used"
error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the scenario where the -action panic=none parameter is used to
signal that the VM must continue executing after a guest panic
occurs.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-5-git-send-email-alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
-----BEGIN PGP SIGNATURE-----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=abAb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20201210' into staging
Aspeed patches :
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
# gpg: Signature made Thu 10 Dec 2020 11:58:10 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20201210:
aspeed: g220a-bmc: Add an FRU
aspeed/smc: Add support for address lane disablement
ast2600: SRAM is 89KB
aspeed: Add support for the g220a-bmc board
hw/misc: add an EMC141{3,4} device model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump the collected random data after a randomness test failure.
Note that this relies on the test having called
g_test_set_nonfatal_assertions() so we don't abort immediately on the
assertion failure.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The QTests perform five tests on the Xilinx ZynqMP CAN controller:
Tests the CAN controller in loopback, sleep and snoop mode.
Tests filtering of incoming CAN messages.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-4-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Largely inspired by the TMP421 temperature sensor, here is a model for
the EMC1413/EMC1414 temperature sensors.
Specs can be found here :
http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf
Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20201122105134.671-1-wangzhiqiang.bj@bytedance.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Create second ioapic, route virtio-mmio IRQs to it,
allow more virtio-mmio devices (24 instead of 8).
Needs ACPI, enabled by default, can be turned off
using -machine ioapic2=off
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20201203105423.10431-8-kraxel@redhat.com
Change that will be introduced by following patch:
@@ -557,6 +557,7 @@ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
CINS, 1,
CRMV, 1,
CEJ0, 1,
+ CEJF, 1,
Offset (0x05),
CCMD, 8
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201207140739.3829993-5-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The generic fuzzer can find double-fetch bugs. However:
* We currently have no good way of producing qemu-system reproducers for
double-fetch bugs. Even if we can get developers to run the binary-blob
reproducers with the qemu-fuzz builds, we currently don't have a minimizer for
these reproducers, so they are usually not easy to follow.
* Often times the fuzzer will provide a reproducer containing a
double-fetch for a bug that can be reproduced without double-fetching.
Until we find a way to build nice double-fetch reproducers that
developers are willing to look at, lets tell OSS-Fuzz to avoid
double-fetches.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201202164214.93867-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Missed in fd25017284 ("qtest: add a reproducer for LP#1878642").
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201201191026.4149955-2-philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the binary file DSDT.pxb and clear bios-tables-test-allowed-diff.h
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-10-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add testcase for pxb to make sure the ACPI table is correct for guest.
Signed-off-by: Yubo Miao <miaoyubo@huawei.com>
Signed-off-by: Jiahui Cen <cenjiahui@huawei.com>
Message-Id: <20201119014841.7298-9-cenjiahui@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The "local" tests can fail on some automated build systems as
reported here:
https://lists.nongnu.org/archive/html/qemu-devel/2020-11/msg05510.html
This will need to be investigated and addressed later. Let's go for a
workaround in the meantime : mark the "local" tests as "slow" so that
they aren't executed with a simple "make check" like in the case above.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <160620382310.1423262.7364287092069513483.stgit@bahia.lan>
Signed-off-by: Greg Kurz <groug@kaod.org>
If expected_args is 0, qtest frees the argument vector and then returns it
nevertheless. Coverity complains; in practice this is not an issue because
expected_args == 0 means that the caller is not interested in the argument
vector, but it would be a potential problem if somebody wanted to add
commands with optional arguments to qtest.
Suggested-by: Kamil Dudka <kdudka@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20201120073149.99079-1-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
According to the glib function requirements, we need initialise
the variable. Otherwise there will be compilation warnings:
glib-autocleanups.h:28:3: warning: ‘full_name’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
28 | g_free (*pp);
| ^~~~~~~~~~~~
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201118115646.2461726-2-kuhn.chenqun@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Advertise both types of events as supported when the guest OS
queries the pvpanic device. Currently only PVPANIC_PANICKED is
exposed; PVPANIC_CRASHLOADED must also be advertised, but only on
new machine types.
Fixes: 7dc58deea7 ("pvpanic: implement crashloaded event handling")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The number of runs is equal to the number of 0-1 and 1-0 transitions,
plus one. Currently, it's counting the number of times these transitions
do _not_ happen, plus one.
Source:
https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication800-22r1a.pdf
section 2.3.4 point (3).
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201103011457.2959989-2-hskinnemoen@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 61030280ca in 2018 we renamed the parse_escape()
function to parse_interpolation(), but we didn't catch the references
to this function in doc comments in libqtest.h. Update them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201109162621.18885-1-peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The virtio-blk fuzz target sets up and fuzzes the available virtio-blk
queues. The implementation is based on two files:
- tests/qtest/fuzz/virtio_scsi_fuzz.c
- tests/qtest/virtio_blk_test.c
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <e2405c459302ecaee2555405604975353bfa3837.1604920905.git.dimastep@yandex-team.ru>
Signed-off-by: Thomas Huth <thuth@redhat.com>
LLVM's linker, LLD, supports the keyword "INSERT AFTER", starting with
version 11.
However, when multiple sections are defined in the same "INSERT AFTER",
they are added in a reversed order, compared to BFD's LD.
This patch makes fork_fuzz.ld generic enough to work with both linkers.
Each section now has its own "INSERT AFTER" keyword, so proper ordering is
defined between the sections added.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-Id: <20201105221905.1350-2-dbuono@linux.vnet.ibm.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The 'addr' would not be NULL after checking 'succ' is valid,
and it has been dereferenced in the previous code(args = g_strdup_printf()).
So the check on 'addr' in the tpm_test_swtpm_test() is redundant. Remove it.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA41448.4040404@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA28117.3020802@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
device-introspect-test uses HMP, so it should escape the device name
properly. Because of this, a few devices that had commas in their
names were escaping testing.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The code did not add offsets to FlatRange bases, so we did not fuzz
offsets within device MemoryRegions.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-4-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should be checking that the device is trying to read from RAM, before
filling the region with data. Otherwise, we will try to populate
nonsensical addresses in RAM for callbacks on PIO/MMIO reads. We did
this originally, however the final version I sent had the line commented
out..
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This code had all sorts of issues. We used a loop similar to
address_space_write_rom, but I did not remove a "break" that only made
sense in the context of the switch statement in the original code. Then,
after the loop, we did a separate qtest_memwrite over the entire DMA
access range, defeating the purpose of the loop. Additionally, we
increment the buf pointer, and then try to g_free() it. Fix these
problems.
Reported-by: OSS-Fuzz (Issue 26725)
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reported-by: OSS-Fuzz (Issue 26691)
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201029172901.534442-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
In qos_build_main_args(), the pointer 'path' is dereferenced before
checking it is valid, which may lead to NULL pointer dereference.
So move the assignment to 'cmd_line' after checking 'path' is valid.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-Id: <5FA16ED5.4000203@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In ahci_exec() we attempt to permit the caller to pass a NULL pointer
for opts_in (in which case we use a default set of options). However
although we check for NULL when setting up the opts variable at the
top of the function, we unconditionally dereference opts_in at the
end of the function as part of freeing the opts->buffer.
Switch to checking whether the final buffer is the same as the
buffer we started with, instead of assuming the value we started
with is always opts_in->buffer.
At the moment all the callers pass a non-NULL opts argument, so
we never saw any crashes in practice.
Fixes: Coverity CID 1432302
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115257.23623-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In socket_accept() we use setsockopt() to set SO_RCVTIMEO,
but we don't check the return value for failure. Do so.
Fixes: Coverity CID 1432321
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201103115112.19211-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
https://bugs.launchpad.net/qemu/+bug/1878642
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201102163336.115444-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The randomness tests in the NPCM7xx RNG test fail intermittently
but fairly frequently. On my machine running the test in a loop:
while QTEST_QEMU_BINARY=./qemu-system-aarch64 ./tests/qtest/npcm7xx_rng-test; do true; done
will fail in less than a minute with an error like:
ERROR:../../tests/qtest/npcm7xx_rng-test.c:256:test_first_byte_runs:
assertion failed (calc_runs_p(buf.l, sizeof(buf) * BITS_PER_BYTE) > 0.01): (0.00286205989 > 0.01)
(Failures have been observed on all 4 of the randomness tests,
not just first_byte_runs.)
It's not clear why these tests are failing like this, but intermittent
failures make CI and merge testing awkward, so disable running them
unless a developer specifically sets QEMU_TEST_FLAKY_RNG_TESTS when
running the test suite, until we work out the cause.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201102152454.8287-1-peter.maydell@linaro.org
Reviewed-by: Havard Skinnemoen <hskinnemoen@google.com>
This test case uses a Tunlinkat request to remove a previously hard
linked file by using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <9bec33a7d8f006ef8f80517985d0d6ac48650d53.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlink request to create a hard link to a regular
file using the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <f0d869770ad23ee5ce10f7da90fdb742cadcad72.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a symlink using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <a23cd4d2ab6d8d3048addab8cbf0416fe5ead43e.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tsymlink 9p request to create a symbolic link using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <84ac76937855bf441242372cc3e62df42f0a3dc4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat request to remove a regular file using
the 9pfs 'local' fs driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4eabeed7f662721dd5664cb77fe36ea0aa08b1ec.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tlcreate 9p request to create a regular file inside
host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <269cae0c00af941a3a4ae78f1e319f93462a7eb4.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This test case uses a Tunlinkat 9p request with flag AT_REMOVEDIR
(see 'man 2 unlink') to remove a directory from host's test directory.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <3c7c65b476ba44bea6afd0b378b5287e1c671a32.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Split out walking a directory path to a separate new utility function
do_walk() and use that function in do_mkdir().
The code difference saved this way is not much, but we'll use that new
do_walk() function in the upcoming patches, so it will avoid quite
some code duplication after all.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <4d7275b2363f122438a443ce079cbb355285e9d6.1603285620.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_mkdir() isn't a top level test function and thus shouldn't take
the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321018148.266767.15959608711038504029.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_readdir_split() isn't a top level test function and thus shouldn't
take the "void *obj, void *data, QGuestAllocator *t_alloc" arguments.
Turn it into a helper to be used by test functions.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016084.266767.9501523425012383531.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_attach() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321017450.266767.17377192504263871186.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_create_dir() is a top level test function. It should set alloc.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321016764.266767.3763279057643874020.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
fs_version() is a top level test function. Factor out the reusable
code to a separate helper instead of hijacking it in other tests.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160321015403.266767.4533967728943968456.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
No need to get a complaint from "rm" if some path disappeared for some
reason.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160406199444.312256.8319835906008559151.stgit@bahia.lan>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Coverity wants the return value of mkdir() to be checked:
/qemu/tests/qtest/libqos/virtio-9p.c: 48 in create_local_test_dir()
42 /* Creates the directory for the 9pfs 'local' filesystem driver to
access. */
43 static void create_local_test_dir(void)
44 {
45 struct stat st;
46
47 g_assert(local_test_path != NULL);
>>> CID 1435963: Error handling issues (CHECKED_RETURN)
>>> Calling "mkdir(local_test_path, 511U)" without checking return value.
This library function may fail and return an error code.
48 mkdir(local_test_path, 0777);
49
50 /* ensure test directory exists now ... */
51 g_assert(stat(local_test_path, &st) == 0);
52 /* ... and is actually a directory */
53 g_assert((st.st_mode & S_IFMT) == S_IFDIR);
So let's just do that and log an info-level message at least, because we
actually only care if the required directory exists and we do have an
existence check for that in place already.
Reported-by: Coverity (CID 1435963)
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <03f68c7ec08064e20f43797f4eb4305ad21e1e8e.1604061839.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Use mkdtemp() to generate a unique directory for the 9p 'local' tests.
This fixes occasional 9p test failures when running 'make check -jN' if
QEMU was compiled for multiple target architectures, because the individual
architecture's test suites would run in parallel and interfere with each
other's data as the test directory was previously hard coded and hence the
same directory was used by all of them simultaniously.
This also requires a change how the test directory is created and deleted:
As the test path is now randomized and virtio_9p_register_nodes() being
called in a somewhat undeterministic way, that's no longer an appropriate
place to create and remove the test directory. Use a constructor and
destructor function for creating and removing the test directory instead.
Unfortunately libqos currently does not support setup/teardown callbacks
to handle this more cleanly.
The constructor functions needs to be in virtio-9p-test.c, not in
virtio-9p.c, because in the latter location it would cause all apps that
link to libqos (i.e. entirely unrelated test suites) to create a 9pfs
test directory as well, which would even break other test suites.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Message-Id: <7746f42d8f557593898d3d9d8e57c46e872dfb4f.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Make functions create_local_test_dir() and remove_local_test_dir()
public. They're going to be used in the next patch.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <ec90703cbc23d6b612b3672f946d7741f4a16080.1604243521.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
The NPCM7xx chips have multiple GPIO controllers that are mostly
identical except for some minor differences like the reset values of
some registers. Each controller controls up to 32 pins.
Each individual pin is modeled as a pair of unnamed GPIOs -- one for
emitting the actual pin state, and one for driving the pin externally.
Like the nRF51 GPIO controller, a gpio level may be negative, which
means the pin is not driven, or floating.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The RNG module returns a byte of randomness when the Data Valid bit is
set.
This implementation ignores the prescaler setting, and loads a new value
into RNGD every time RNGCS is read while the RNG is enabled and random
data is available.
A qtest featuring some simple randomness tests is included.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The watchdog is part of NPCM7XX's timer module. Its behavior is
controlled by the WTCR register in the timer.
When enabled, the watchdog issues an interrupt signal after a pre-set
amount of cycles, and issues a reset signal shortly after that.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: deleted blank line at end of npcm_watchdog_timer-test.c]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=OL0Q
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert/tags/pull-migration-20201026a' into staging
migration pull: 2020-10-26
Another go at Peter's postcopy fixes
Cleanups from Bihong Yu and Peter Maydell.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Oct 2020 16:17:03 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert/tags/pull-migration-20201026a:
migration-test: Only hide error if !QTEST_LOG
migration/postcopy: Release fd before going into 'postcopy-pause'
migration: Sync requested pages after postcopy recovery
migration: Maintain postcopy faulted addresses
migration: Introduce migrate_send_rp_message_req_pages()
migration: Pass incoming state into qemu_ufd_copy_ioctl()
migration: using trace_ to replace DPRINTF
migration: Delete redundant spaces
migration: Open brace '{' following function declarations go on the next line
migration: Do not initialise statics and globals to 0 or NULL
migration: Add braces {} for if statement
migration: Open brace '{' following struct go on the same line
migration: Add spaces around operator
migration: Don't use '#' flag of printf format
migration: Do not use C99 // comments
migration: Drop unused VMSTATE_FLOAT64 support
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The errors are very useful when debugging qtest failures, especially when
QTEST_LOG=1 is set. Let's allow override MigrateStart.hide_stderr when
QTEST_LOG=1 is specified, because that means the user wants to be verbose.
Not very nice to introduce the first QTEST_LOG env access in migration-test.c,
however it should be handy. Without this patch, I was hacking error_report()
when debugging such errors. Let's make things easier.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20201021212721.440373-7-peterx@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We call get_generic_fuzz_configs, which fills an array with
predefined {name, args, objects} triples. For each of these, we add a
new FuzzTarget, that uses a small wrapper to set
QEMU_FUZZ_{ARGS,OBJECTS} to the corresponding predefined values.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-16-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Predefine some generic-fuzz configs. For each of these, we will create a
separate FuzzTarget that can be selected through argv0 and, therefore,
fuzzed on oss-fuzz.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-15-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It can be useful to register FuzzTargets that have nearly-identical
initialization handlers (e.g. for using the same fuzzing code, with
different configuration options). Add an opaque pointer to the
FuzzTarget struct, so that FuzzTargets can hold some data, useful for
storing target-specific configuration options, that can be read by the
get_init_cmdline function.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-14-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-10-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new operation is used in the next commit, which concatenates two
fuzzer-generated inputs. With this operation, we can prevent the second
input from clobbering the PCI configuration performed by the first.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-9-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libfuzzer supports a "custom crossover function". Libfuzzer often tries
to blend two inputs to create a new interesting input. Sometimes, we
have a better idea about how to blend inputs together. This change
allows fuzzers to specify a custom function for blending two inputs
together.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-8-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a virtual-device tries to access some buffer in memory over DMA, we
add call-backs into the fuzzer(next commit). The fuzzer checks verifies
that the DMA request maps to a physical RAM address and fills the memory
with fuzzer-provided data. The patterns that we use to fill this memory
are specified using add_dma_pattern and clear_dma_patterns operations.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-5-alxndr@bu.edu>
[thuth: Reformatted one comment according to the QEMU coding style]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch compares TYPE_PCI_DEVICE objects against the user-provided
matching pattern. If there is a match, we use some hacks and leverage
QOS to map each possible BAR for that device. Now fuzzed inputs might be
converted to pci_read/write commands which target specific. This means
that we can fuzz a particular device's PCI configuration space,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-4-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is a generic fuzzer designed to fuzz a virtual device's
MemoryRegions, as long as they exist within the Memory or Port IO (if it
exists) AddressSpaces. The fuzzer's input is interpreted into a sequence
of qtest commands (outb, readw, etc). The interpreted commands are
separated by a magic seaparator, which should be easy for the fuzzer to
guess. Without ASan, the separator can be specified as a "dictionary
value" using the -dict argument (see libFuzzer documentation).
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-3-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The g_list_remove_link doesn't free the link element,
opposed to what I thought.
Switch to g_list_delete_link that does free it.
Also refactor the code a bit.
Thanks for Max Reitz for helping me with this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-4-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By a mistake I added the pending events in a wrong order.
Fix this by using g_list_append.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-3-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test won't work if qemu was compiled without CONFIG_NPCM7XX, as
pointed out by Thomas Huth on a different patch.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201023210637.351238-2-hskinnemoen@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtests can be run directly by specifying the QEMU binary with the
QTEST_QEMU_BINARY environment variable, for example:
$ QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/qtest/test-hmp
However, if you specify a binary without a path, for example with
QTEST_QEMU_BINARY=qemu-system-x86_64 if the QEMU binary is in your
$PATH, then the test currently simply crashes.
Let's try a little bit smarter here by looking for the final '-'
instead of the slash.
Message-Id: <20201012114816.43546-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
this fixes non-TCG builds broken recently by replay reverse debugging.
Stub the needed functions in stub/, splitting roughly between functions
needed only by system emulation, by system emulation and tools,
and by everyone. This includes duplicating some code in replay/, and
puts the logic for non-replay related events in the replay/ module (+
the stubs), so this should be revisited in the future.
Surprisingly, only _one_ qtest was affected by this, ide-test.c, which
resulted in a buzz as the bh events were never delivered, and the bh
never executed.
Many other subsystems _should_ have been affected.
This fixes the immediate issue, however a better way to group replay
functionality to TCG-only code could be developed in the long term.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-4-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
the tests assume TCG is available, thus breaking
for TCG-only tests, where only the TCG accelerator option
is passed to the QEMU binary.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20201013192123.22632-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Starting with meson 0.56, colons are used to separate the subproject name
from the test name. Use dash or slash depending on what looks nicer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This test exercises the various modes of the npcm7xx timer. In
particular, it triggers the bug found by the fuzzer, as reported here:
https://lists.gnu.org/archive/html/qemu-devel/2020-09/msg02992.html
It also found several other bugs, especially related to interrupt
handling.
The test exercises all the timers in all the timer modules, which
expands to 180 test cases in total.
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20201008232154.94221-2-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This test case uses the 9pfs 'local' driver to create a directory
and then checks if the expected directory was actually created
(as real directory) on host side.
This patch introduces a custom split() implementation, because
the test code requires non empty array elements as result. For
that reason g_strsplit() would not be a good alternative, as
it would require additional filter code for reshuffling the
array, and the resulting code would be even more complex than
this split() function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <be342f236842272275f65dbe05587f0a5409ad77.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This new public function virtio_9p_test_path() allows 9pfs
'local' tests to translate a path from guest scope to host
scope. For instance by passing an empty string it would
return the root path on host of the exported 9pfs tree.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b563d3c73c6391ec927a2622c9f65c09ca56bd83.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Before running the first 9pfs test case, make sure the test directory
for running the 9pfs 'local' tests on is entirely empty. For that
reason simply delete the test directory (if any) before (re)creating
it on test suite startup.
Note: The preferable precise behaviour would be the test directory
only being wiped once *before* a test suite run. Right now the test
directory is also wiped at the *end* of a test suite run because
libqos is calling the virtio_9p_register_nodes() callback for some
reason also when a test suite completed. This is suboptimal as
developers cannot immediately see what files and directories the
9pfs local tests created precisely after the test suite completed.
But fortunately the test directory is not wiped if some test failed.
So it is probably not worth it drilling another hole into libqos
for this issue.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b30776ea3289dc40dabc7d0063d825d21d9a65bf.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
This patch introduces 9pfs test cases using the 9pfs 'local'
filesystem driver which reads/writes/creates/deletes real files
and directories.
In this initial version, there is only one local test which actually
only checks if the 9pfs 'local' device was created successfully.
Before the 9pfs 'local' tests are run, a test directory 'qtest-9p-local'
is created (with world rwx permissions) under the current working
directory. At this point that test directory is not auto deleted yet.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <81fc4b3b6b6c9bf7999e79f5e7cbc364a5f09ddb.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
All existing 9pfs test cases are using the 'synth' fs driver so far, which
means they are not accessing real files, but a purely simulated (in RAM
only) file system.
Let's make this clear by changing the prefix of the individual qtest case
names from 'fs/' to 'synth/'. That way they'll be easily distinguishable
from upcoming new 9pfs test cases supposed to be using a different fs
driver.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <e04e75acb849b085c6d6320b2433a15fa935bcff.1602182956.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Prior to this patch, the only way I found to terminate the fuzzer was
either to:
1. Explicitly specify the number of fuzzer runs with the -runs= flag
2. SIGKILL the process with "pkill -9 qemu-fuzz-*" or similar
In addition to being annoying to deal with, SIGKILLing the process skips
over any exit handlers(e.g. registered with atexit()). This is bad,
since some fuzzers might create temporary files that should ideally be
removed on exit using an exit handler. The only way to achieve a clean
exit now is to specify -runs=N , but the desired "N" is tricky to
identify prior to fuzzing.
Why doesn't the process exit with standard SIGINT,SIGHUP,SIGTERM
signals? QEMU installs its own handlers for these signals in
os-posix.c:os_setup_signal_handling, which notify the main loop that an
exit was requested. The fuzzer, however, does not run qemu_main_loop,
which performs the main_loop_should_exit() check. This means that the
fuzzer effectively ignores these signals. As we don't really care about
cleanly stopping the disposable fuzzer "VM", this patch uninstalls
QEMU's signal handlers. Thus, we can stop the fuzzer with
SIG{INT,HUP,TERM} and the fuzzing code can optionally use atexit() to
clean up temporary files/resources.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201014142157.46028-1-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
-----BEGIN PGP SIGNATURE-----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=lCRK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-13' into staging
* qtest improvements (test for crash found with the fuzzer, increase
downtime in migration test, less verbose output when running w/o KVM)
* Improve handling of acceptance tests in the Gitlab-CI
* Run checkpatch.pl in the Gitlab-CI
* Improve the gitlab-pipeline-status script
* Misc patches (mark 'moxie' as deprecated, remove stale .gitignore files, ...)
# gpg: Signature made Tue 13 Oct 2020 11:49:06 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-13: (23 commits)
scripts/ci/gitlab-pipeline-status: wait for pipeline creation
scripts/ci/gitlab-pipeline-status: use more descriptive exceptions
scripts/ci/gitlab-pipeline-status: handle keyboard interrupts
scripts/ci/gitlab-pipeline-status: refactor parser creation
scripts/ci/gitlab-pipeline-status: give early feedback on running pipelines
scripts/ci/gitlab-pipeline-status: improve message regarding timeout
scripts/ci/gitlab-pipeline-status: make branch name configurable
gitlab: assign python helper files to GitLab maintainers section
gitlab: add a CI job to validate the DCO sign off
gitlab: add a CI job for running checkpatch.pl
configure: fixes indent of $meson setup
docs/system/deprecated: Mark the 'moxie' CPU as deprecated
Remove superfluous .gitignore files
MAINTAINERS: Ignore bios-tables-test in the qtest section
Add a comment in bios-tables-test.c to clarify the reason behind approach
softmmu/vl: Be less verbose about missing KVM when running the qtests
tests/migration: Allow longer timeouts
qtest: add fuzz test case
Acceptance tests: show test report on GitLab CI
Acceptance tests: do not show canceled test logs on GitLab CI
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A comment is added in bios-tables-test.c that explains the reasoning
behind the process of updating the ACPI table blobs when new tests are added
or old tests are modified or code is committed that affect tests. The
explanation would help future contributors follow the correct process when
making code changes that affect ACPI tables.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929142501.1057-1-ani@anisinha.ca>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In travis, with gcov and gprof we're seeing timeouts; hopefully fix
this by increasing the test timeouts a bit, but for xbzrle ensure it
really does get a couple of cycles through to test the cache.
I think the problem in travis is we have about 2 host CPU threads,
in the test we have at least 3:
a) The vCPU thread (100% flat out)
b) The source migration thread
c) The destination migration thread
if (b) & (c) are slow for any reason - gcov+gperf or a slow host -
then they're sharing one host CPU thread so limit the migration
bandwidth.
Tested on my laptop with:
taskset -c 0,1 ./tests/qtest/migration-test -p /x86_64/migration
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201008160330.130431-1-dgilbert@redhat.com>
[thuth: Move the #define to the right location]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the device fuzzer finds more and more issues.
For every fuzz case, we need not only the fixes but also
the corresponding test case. We can analysis the reproducer
for every case and find what happened in where and write
a beautiful test case. However the raw data of reproducer is not
friendly to analysis. It will take a very long time, even far more
than the fixes itself. So let's create a new file to hold all of
the fuzz test cases and just use the raw data to act as the test
case. This way nobody will be afraid of writing a test case for
the fuzz reproducer.
This patch adds the issue LP#1878263 test case.
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20200921160605.19329-1-liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
[thuth: Slightly adjusted commit message, removed empty lines]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use self-explicit NANOSECONDS_PER_SECOND definition instead
of a magic value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201011194918.3219195-5-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Test 067 from qemu-iotests is executing QMP commands to hotplug
and hot-unplug disks, devices and blockdevs. Because the power
of the text-based test harness is limited, it is actually limiting
the checks that it does, for example by skipping DEVICE_DELETED
events.
tests/qtest already has a similar test, drive_del-test.c.
We can merge them, and even reuse some of the existing code in
drive_del-test.c. This will improve the quality of the test by
covering DEVICE_DELETED events and testing multiple architectures
(therefore covering multiple PCI hotplug mechanisms as well as s390x
virtio-ccw).
The only difference is that the new test will always use null-co:// for
the medium rather than qcow2 or raw, but this should be irrelevant for
what the test is covering. For example there are no "qemu-img check"
runs in 067 that would check that the file is properly closed.
The new tests requires PCI hot-plug support, so drive_del-test
is moved from qemu-system-ppc to qemu-system-ppc64.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not just trust the HMP commands to create and delete the drive, use
query-block to check that this is actually the case.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let test use the new functionality for buffering events.
The only remaining users of qtest_qmp_receive_dict are tests
that fuzz the QMP protocol.
Tested with 'make check-qtest'.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201006123904.610658-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the code now that events are buffered. There is no need
anymore to separate sending the command and retrieving the response.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The purpose of qtest_qmp_receive_success was mostly to process events
that arrived between the issueing of a command and the "return"
line from QMP. This is now handled by the buffering of events
that libqtest performs automatically.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
The new qtest_qmp_receive buffers all the received qmp events, allowing
qtest_qmp_eventwait_ref to return them.
This is intended to solve the race in regard to ordering of qmp events
vs qmp responses, as soon as the callers start using the new interface.
In addition to that, define qtest_qmp_event_ref a function which only scans
the buffer that qtest_qmp_receive stores the events to. This is intended
for callers that are only interested in events that were received during
the last call to the qtest_qmp_receive.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201006123904.610658-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the next patch a new version of qtest_qmp_receive will be
reintroduced that will buffer received qmp events for later
consumption in qtest_qmp_eventwait_ref
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the extra sources and extra dependencies of qtests are held
in two separate dictionaries. Use the same trick as tests/meson.build
to combine them into one. This will make it easier to update the
documentation for unit tests and qtests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We add the kvm-steal-time CPU property and implement it for machvirt.
A tiny bit of refactoring was also done to allow pmu and pvtime to
use the same vcpu device helper functions.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-7-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm-cpu-features got dropped from the AArch64 tests during the meson
conversion shuffle.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 20201001061718.101915-6-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
-----BEGIN PGP SIGNATURE-----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=T7wc
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-06' into staging
* Don't stop at the first unbootable device, continue scanning
* Fix corner cases in booting from ECKD
* s390x-ccw bios cleanup part 2
# gpg: Signature made Tue 06 Oct 2020 19:17:46 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-06:
tests/qtest/cdrom: Add more s390x-related boot tests
pc-bios/s390: Update the s390-ccw bios binaries
pc-bios: s390x: Go into disabled wait when encountering a PGM exception
pc-bios: s390x: Use reset PSW if avaliable
pc-bios: s390x: Save PSW rework
pc-bios: s390x: Fix bootmap.c zipl component entry data handling
pc-bios/s390-ccw: break loop if a null block number is reached
pc-bios/s390-ccw: fix off-by-one error
pc-bios/s390-ccw/main: Remove superfluous call to enable_subchannel()
pc-bios/s390-ccw: Allow booting in case the first virtio-blk disk is bad
pc-bios/s390-ccw: Scan through all devices if no boot device specified
pc-bios/s390-ccw: Do not bail out early if not finding a SCSI disk
pc-bios/s390-ccw: Move the inner logic of find_subch() to a separate function
pc-bios/s390-ccw: Introduce ENODEV define and remove guards of others
pc-bios/s390-ccw: Move ipl-related code from main() into a separate function
pc-bios/s390-ccw/Makefile: Compile with -std=gnu99, -fwrapv and -fno-common
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's add two new tests:
1) Booting with "bootindex" is the architected default behavior on the
s390x target, so we should have at least one test that is using the
"bootindex" property.
2) The s390-ccw bios used to fail when other unbootable devices have
been specified before the bootable device (without "bootindex"). Now
that the s390-ccw bios is a little bit smarter here, we should test
this scenario, too, to avoid regressions.
Message-Id: <20200806105349.632-10-thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
SLIRP uses Meson so it could become a subproject in the future,
but our choice of configure options is not yet supported in Meson
(https://github.com/mesonbuild/meson/pull/7740).
For now, build the library via the main meson.build just like for
capstone.
This improves the current state of affairs in that we will re-link
the qemu executables against a changed libslirp.a, which we wouldn't
do before-hand.
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't need to use kernel-irqchip=off for irq0 override if IRQ
routing is supported by the host, which is the case since 2009
(IRQ routing was added to KVM in Linux v2.6.30).
This is a more straightforward fix for Launchpad bug #1896263, as
it doesn't require increasing the complexity of the MSR code.
kernel-irqchip=off is for debugging only and there's no need to
increase the complexity of the code just to work around an issue
that was already fixed in the kernel.
Fixes: https://bugs.launchpad.net/bugs/1896263
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200922194732.2100510-1-ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make things consistent with how softmmu/vl.c uses os_find_datadir.
Initializing the path to the executables will also be needed for
get_relocatable_path to work.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Just return the directory without requiring the caller to free it.
This also removes a bogus check for NULL in os_find_datadir and
module_load_one; g_strdup of a static variable cannot return NULL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This does not have any effect on Meson's behavior itself, since "meson test"
always rebuilds everything (that is one reason why we are not using it...).
However, mtest2make can use this information to do a selective rebuild
for the requested suite.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
... into new test_acpi_microvm_prepare helper
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200928104256.9241-10-kraxel@redhat.com
This change adds a unit test to exercise the case when hotplug is disabled
both for pci root bus and the pci bridges by passing the following two
switches to qemu:
-global PIIX4_PM.acpi-root-pci-hotplug=off
-global PIIX4_PM.acpi-pci-hotplug-with-bridge-support=off
bios-tables-test-allowed-diff.h documents the fact that a new DSDT acpi gold
master binary blob we need to be added to test this. We will do the actual
addition in the next patch in the series.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200929123011.31836-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The last pull added a ton of useless files by mistake.
Drop them all.
Fixes: 0ed93f4c05 ("update golden master DSDT binary table blobs for q35")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the previously applied commit ("piix4: don't reserve hw resources when
hotplug is off globally"), we make changes to the ACPI DSDT tables
such that some ACPI code are not generated when bsel is absent. Since
as of this point in time, in q35 machines, we do not use bsel for pci
buses, we need to update the DSDT table blobs.
This patch updates the DSDT golden master tables for q35 machines.
At the same time, we clear bios-tables-test-allowed-diff.h for future
changes which update tables.
Following is a typical diff between the q35 acpi DSDT table blobs:
@@ -1,30 +1,30 @@
/*
* Intel ACPI Component Architecture
* AML/ASL+ Disassembler version 20180105 (64-bit version)
* Copyright (c) 2000 - 2018 Intel Corporation
*
* Disassembling to symbolic ASL+ operators
*
- * Disassembly of tests/data/acpi/q35/DSDT, Tue Sep 15 18:52:47 2020
+ * Disassembly of /tmp/aml-3O0DR0, Tue Sep 15 18:52:47 2020
*
* Original Table Header:
* Signature "DSDT"
- * Length 0x00001DFE (7678)
+ * Length 0x00001DF6 (7670)
* Revision 0x01 **** 32-bit table (V1), no 64-bit math support
- * Checksum 0xAC
+ * Checksum 0x17
* OEM ID "BOCHS "
* OEM Table ID "BXPCDSDT"
* OEM Revision 0x00000001 (1)
* Compiler ID "BXPC"
* Compiler Version 0x00000001 (1)
*/
DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPCDSDT", 0x00000001)
{
Scope (\)
{
OperationRegion (DBG, SystemIO, 0x0402, One)
Field (DBG, ByteAcc, NoLock, Preserve)
{
DBGB, 8
}
@@ -3113,24 +3113,20 @@
Name (_ADR, 0x00010000) // _ADR: Address
Method (_S1D, 0, NotSerialized) // _S1D: S1 Device State
{
Return (Zero)
}
Method (_S2D, 0, NotSerialized) // _S2D: S2 Device State
{
Return (Zero)
}
Method (_S3D, 0, NotSerialized) // _S3D: S3 Device State
{
Return (Zero)
}
}
-
- Method (PCNT, 0, NotSerialized)
- {
- }
}
}
}
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-12-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following patch ("piix4: don't reserve hw resources when
hotplug is off globally") modifies certain ACPI tables for q35 machines.
This patch adds those table names to tests/qtest/bios-tables-test-allowed-diff.h
so that unit tests continue to pass and bisection is not broken.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-10-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds a new unit test for the global flag
'acpi-pci-hotplug-with-bridge-support' which is available for cold plugged pci
bridges in i440fx. The flag can be used to turn off ACPI based hotplug support
on all pci bridges.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-8-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The file 'tests/data/acpi/pc/DSDT.hpbridge' is a newly added acpi table file
for testing the pci bridge option 'acpi-pci-hotplug-with-bridge-support' under
i440fx. This change documents this fact.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-7-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Ability to turn hotplug off on the pci root bus for i440fx was added in commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on the
root bus")
This change adds a unit test in order to test this feature.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-3-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A new binary acpi table tests/data/acpi/pc/DSDT.roothp is added in order to
unit test the feature flag that can disable/enable root pci bus hotplug on
i440fx. This feature was added with the commit:
3d7e78aa77 ("Introduce a new flag for i440fx to disable PCI hotplug on
the root bus")
This change documents the fact that this new file addition was made as a part
of the unit test change.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200918084111.15339-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
here is diff against tests/data/acpi/q35/DSDT
for currently shipped ovmf binary.
(once firmware blob is updated, it will negotiate CPU hotplug
feature which will ad extra hunk sending SMI and Q35 tests will
need to be updated), but otherwise diff shows new CPU hotplug
AML that is shared between q35 and pc machines.
Method (CSCN, 0, Serialized)
{
Acquire (\_SB.PCI0.PRES.CPLK, 0xFFFF)
- Local0 = One
- While ((Local0 == One))
- {
- Local0 = Zero
- \_SB.PCI0.PRES.CCMD = Zero
- If ((\_SB.PCI0.PRES.CINS == One))
+ Name (CNEW, Package (0xFF){})
+ Local3 = Zero
+ Local4 = One
+ While ((Local4 == One))
+ {
+ Local4 = Zero
+ Local0 = One
+ Local1 = Zero
+ While (((Local0 == One) && (Local3 < One)))
{
- CTFY (\_SB.PCI0.PRES.CDAT, One)
- \_SB.PCI0.PRES.CINS = One
- Local0 = One
+ Local0 = Zero
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CCMD = Zero
+ If ((\_SB.PCI0.PRES.CDAT < Local3))
+ {
+ Break
+ }
+
+ If ((Local1 == 0xFF))
+ {
+ Local4 = One
+ Break
+ }
+
+ Local3 = \_SB.PCI0.PRES.CDAT
+ If ((\_SB.PCI0.PRES.CINS == One))
+ {
+ CNEW [Local1] = Local3
+ Local1++
+ Local0 = One
+ }
+ ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+ {
+ CTFY (Local3, 0x03)
+ \_SB.PCI0.PRES.CRMV = One
+ Local0 = One
+ }
+
+ Local3++
}
- ElseIf ((\_SB.PCI0.PRES.CRMV == One))
+
+ Local2 = Zero
+ While ((Local2 < Local1))
{
- CTFY (\_SB.PCI0.PRES.CDAT, 0x03)
- \_SB.PCI0.PRES.CRMV = One
- Local0 = One
+ Local3 = DerefOf (CNEW [Local2])
+ CTFY (Local3, One)
+ Debug = Local3
+ \_SB.PCI0.PRES.CSEL = Local3
+ \_SB.PCI0.PRES.CINS = One
+ Local2++
}
}
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-11-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... to let tests pass until binary blobs are updated with new AML
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200923094650.1301166-6-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These were deprecated since 4.0, remove both HMP and QMP variants.
Users should use device_add command instead. To get list of
possible CPUs and options, use 'info hotpluggable-cpus' HMP
or query-hotpluggable-cpus QMP command.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200915120403.1074579-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now only vhost-user-net device is supported by the test. Other
vhost-user devices are not tested. As a first step make source code
refactoring so new devices can reuse the same test routines. To make
this provide a new vhost_user_ops structure with the methods to
initialize device, its command line or make a proper vhost-user
responses.
Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <a48b60fb96fef230b75fff72a2d77040dcb5ef7c.1599813294.git.dimastep@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We simply want to ignore certain queries here, so let's rather
use the term 'ignore' to express this intention.
Message-Id: <20200914163755.42618-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Telling QTest to log to /dev/fd/2, essentially results in dup(2). This
is fine, if other code isn't logging to stderr. Otherwise, the order of
the logs is mixed due to buffering issues, since two file-descriptors
are used to write to the same file. We can avoid this, since just
specifying "-qtest" sets the log fd to stderr. If we want to disable
qtest logs, we can just add -qtest-log none.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200819061110.1320568-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On oss-fuzz, we must use the LIB_FUZZING_ENGINE and CFLAGS environment
variables, rather than -fsanitize=fuzzer. With this change, when
LIB_FUZZING_ENGINE is set, the --enable-fuzzing configure option will
use that environment variable during the linking stage, rather than
-fsanitize=fuzzer
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-3-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add genh to the sources to avoid race conditions between QAPI
file generation and libqos compilation.
Make the name_suffix .fa for consistency with other link_whole
static libraries and to work around a Meson issue where
lots of linker flags are placed between -Wl,--start-group and
-Wl,--end-group and this breaks the fork-fuzz.ld linker script.
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is caught by "meson test", which complains about two tests with the
same name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200904120342.11370-1-pbonzini@redhat.com>
Fixes: a2ce7dbd91 ("meson: convert tests/qtest to meson")
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
qmp_assert_error_class() does more than just assert: it also unrefs
the @rsp argument. Rename to qmp_expect_error_and_unref() to reduce
confusion.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200902115733.1229537-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix assert side-effect reported by Coverity:
/qemu/tests/qtest/ipmi-kcs-test.c: 84 in kcs_wait_obf()
83 while (IPMI_KCS_CMDREG_GET_OBF() == 0) {
>>> CID 1432368: Incorrect expression (ASSERT_SIDE_EFFECT)
>>> Argument "--count" of g_assert() has a side effect. The containing function might work differently in a non-debug build.
84 g_assert(--count != 0);
Reported-by: Coverity (CID 1432368)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080801.160652-2-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The functions using these arrays expect a "const unsigned char *"
argument, it is safe to declare these as 'static const'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080909.161034-1-philmd@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix an error handling issue reported by Coverity:
/qemu/tests/qtest/ahci-test.c: 1452 in prepare_iso()
1444 int fd = mkstemp(cdrom_path);
>>> CID 1432375: Error handling issues (NEGATIVE_RETURNS)
>>> "fd" is passed to a parameter that cannot be negative.
1452 ret = write(fd, patt, size);
Reported-by: Coverity (CID 1432375)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200902080552.159806-1-philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add smbios type 4 CPU speed check for we added new options to set
smbios type 4 "max speed" and "current speed". The default value
should be 2000 when no option is specified, just as the old version
did.
We add the test case to one machine of each architecture, though it
doesn't really run on aarch64 platform for smbios test can't run on
uefi only platform yet.
Signed-off-by: Ying Fang <fangying1@huawei.com>
Signed-off-by: Heyi Guo <guoheyi@huawei.com>
Message-Id: <20200806035634.376-3-fangying1@huawei.com>
Move the create-config logic to meson.build; create a
configuration_data object and let meson handle the
quoting and output.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>