Based on a patch from Hans de Goede <hdegoede@redhat.com>
This warning is new in gcc 4.6.
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When compiling with DEBUG_TCGV enabled, make the TCGv_ptr type distinct
from TCGv_i32/TCGv_i64. This means that using an i32 or i64 TCG op to
manipulate a TCGv_ptr will always be detected at compile time, rather
than only if compiling on a host system with the other word size.
NB: the tcg_add_ptr and tcg_sub_ptr macros have been removed as they
were not used anywhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The prototypes for the ld/st functions on a 64 bit host declared
the address parameter as a TCGv_i64 rather than a TCGv_ptr. This
worked OK (since the two are aliases), but needs to be fixed to
allow extension of TCG type debugging to i64/i32/ptr mismatches.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the correct header in the TCG MIPS code to find cacheflush() on OpenBSD
to fix compilation of the MIPS host support for OpenBSD/mips64 based architecures.
Signed-off-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the correct _ptr aliases for manipulating the pointer to
the fp_status; this fixes a compilation failure on 64 bit hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_is_zero_or_denormal() is available for float32, but not for
float64, floatx80 and float128. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of using a table which doesn't correspond to anything from
physical in the CPU, use directly the constants in helper_fld*_ST0().
Cc: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that softfloat-native is gone, there is no real point on not always
enabling floatx80 and float128 support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that target-i386 uses softfloat, floatx80 is always available and
there is no need anymore to have code handling both float64 and floax80.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-mips has been switched to softfloat only long ago, but
a #ifndef CONFIG_SOFTFLOAT has been forgotten. Remove it.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-ppc has been switched to softfloat only long ago, but a
few #ifdef CONFIG_SOFTFLOAT have been forgotten. Remove them.
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The LRVGR instruction was missing. Implement it, so everyone's happy.
Reported-by: Balazs Kutil <bkutil@novell.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The cksm instruction was implemented incorrectly, rendering UDP and TCP
checksum calculation wrong, making an emulated s390x Linux guest break
in most networking operations.
This patch fixes odd end checksum calculation, takes the input register
as input for the checksum and optimizes the overflow pieces by a bit.
Signed-off-by: Alexander Graf <agraf@suse.de>
The disas_a5() function provided a TCG tmp variable which was populated
by the respective opcode implementations, but freed at the end of the
function in generic code.
That makes it really hard for code review, so let's move the freeing
to the same scope as the actual allocation.
Signed-off-by: Alexander Graf <agraf@suse.de>
tmp2 = tcg_temp_new_i64() is already executed unconditionally,
so there is no need to call it a second time for 64 bit hosts.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
tcg_gen_shl_i64 needs a 3rd argument of type TCGv_i64.
Set tmp4 so it can be used here.
v2:
Don't call tcg_const_i64() inside of the loop
because it creates additional code.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
linux/kvm.h is not always available for compilation.
Neither linux/kvm.h nor kvm.h are needed, so remove both
which also fixes the build problem for non-linux hosts.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
The zipl bootloader rom we have has seen some dramatic speedups upstream,
so let's update it to improve the experience when booting a guest image.
This binary is based on commit id 9a0842dd9823d529f721b418d554f17c72e009e3.
Signed-off-by: Alexander Graf <agraf@suse.de>
After the Qdev'ification of the MPC8544DS board and PCI bus, the internal
PCI bus name changed from "pci" to "pci.0". Reflect this change in the
search for that bus.
This patch enables networking on e500 guests again.
Signed-off-by: Alexander Graf <agraf@suse.de>
When running -nographic and calling "screendump" on the monitor, qemu
segfaults. Fix the invalid pointer dereference by checking for NULL.
Signed-off-by: Alexander Graf <agraf@suse.de>
We don't install mpc8544ds.dtb, which means that -M mpc8544ds doesn't
work when installed. Fix it by installing the file.
Signed-off-by: Alexander Graf <agraf@suse.de>
When compiling qemu with kvm support on BookE PPC machines, I get
the following error:
cc1: warnings being treated as errors
/tmp/qemu/target-ppc/kvm.c: In function 'kvm_arch_get_registers':
/tmp/qemu/target-ppc/kvm.c:188: error: unused variable 'sregs'
This is due to overly ambitious #ifdef'ery introduced in 90dc88.
Fix it by keeping code that doesn't depend on new headers alive
for the compiler, but never executed due to failing capability
checks.
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When QEMU was configured with --enable-debug-tcg,
compilation fails in spr_write_booke206_mmucsr0() and in
spr_write_booke_pid(). Similar changes are also needed
in conditional code which is normally unused.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix an integer overflow that can happen for signed 32 bit types
when using FLOAT_MIXENG. (Note that at the moment this is only true
when using the MacOSX coreaudio audio driver.)
Signed-off-by: Juha Riihim?ki <juha.riihimaki@nokia.com>
[Peter Maydell: Removed unnecessary casts]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: malc <av1474@comtv.ru>
Thanks to Tobias Hoffmann <th55@gmx.de> for this patch.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
After NACKing a read operation, a raising SCL should not trigger a new
read from the slave. Introduce a new state which just waits for a stop
or start condition after NACK.
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
There is little in common with user and softmmu versions of cpu_resume_signal(),
split them.
Fix coding style for the user emulator part.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
All you could ever achieve with it is break stuff, so removing it
should be safe.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
virtio-serial-bus needs to treat "virtconsole" devices specially. It
uses VirtIOSerialPort member is_console to recognize them. It gets
its value via property initialization. Cute hack, except it lets
users mess with it: "-device virtconsole,is_console=0" isn't plugged
into port 0 as it should.
Move the flag to VirtIOSerialPortInfo. Keep the property for backward
compatibility; its value has no effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
virtio_serial_init() allocates the VirtIOSerialBus dynamically, but
virtio_serial_exit() doesn't free it.
Fix by getting rid of the allocation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Instead of calling flush_queued_data when unthrottling, schedule
a bh. That way we can return immediately to the caller, and the
flush uses the same call path as a have_data for callbackee.
No migration change is required because bh are called from vm_stop.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The LUN field in the CDB is a historical relic. Ignore it as reserved,
which is what modern SCSI specifications actually say.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>