Now that 32-bit KVM host support is gone, KVM can never
be enabled unless CONFIG_AARCH64 is true, and some code
paths are no longer reachable and can be deleted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-3-peter.maydell@linaro.org
We deprecated the support for KVM on 32-bit Arm hosts in time
for release 5.0, which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note: the Linux
kernel dropped support for 32-bit Arm KVM hosts in 5.7.
Running 32-bit guests on a 64-bit Arm host remains supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200904154156.31943-2-peter.maydell@linaro.org
The VCMLA and VCADD insns have a size field which is 0 for fp16
and 1 for fp32 (note that this is the reverse of the Neon 3-same
encoding!). Convert it to MO_* values in decode for consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-4-peter.maydell@linaro.org
Convert the insns using the 2reg_vcvt and 2reg_vcvt_f16 formats
to pass the size through to the trans function as a MO_* value
rather than the '0==f32, 1==f16' used in the fp 3-same encodings.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-3-peter.maydell@linaro.org
In the Neon instructions, some instruction formats have a 2-bit size
field which corresponds exactly to QEMU's MO_8/16/32/64. However the
floating-point insns in the 3-same group have a 1-bit size field
which is "0 for 32-bit float and 1 for 16-bit float". Currently we
pass these values directly through to trans_ functions, which means
that when reading a particular trans_ function you need to know if
that insn uses a 2-bit size or a 1-bit size.
Move the handling of the 1-bit size to the decodetree file, so that
all these insns consistently pass a size to the trans_ function which
is an MO_8/16/32/64 value.
In this commit we switch over the insns using the 3same_fp and
3same_fp_q0 formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200903133209.5141-2-peter.maydell@linaro.org
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl9aa4YACgkQIeENKd+X
cFTJjgf5ASfFIO5HqP1l80/UM5Pswyq0IROZDq0ItZa6U4EPzLXoE2N0POriIj4h
Ds2JbMg0ORDqY0VbSxHlgYHMgJ9S6cuVOMnATsPG0d2jaJ3gSxLBu5k/1ENqe+Vw
sSYXZv5uEAUfOFz99zbuhKHct5HzlmBFW9dVHdflUQS+cRgsSXq27mz1BvZ8xMWl
lMhwubqdoNx0rOD3vKnlwrxaf54DcJ2IQT3BtTCjEar3tukdNaLijAuwt2hrFyr+
IwpeFXA/NWar+mXP3M+BvcLaI33j73/ac2+S5SJuzHGp/ot5nT5gAuq3PDEjHMeS
t6z9Exp776VXxNE2iUA5NB65Yp3/6w==
=07oA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging
This PR includes multiple fixes and features for RISC-V:
- Fixes a bug in printing trap causes
- Allows 16-bit writes to the SiFive test device. This fixes the
failure to reboot the RISC-V virt machine
- Support for the Microchip PolarFire SoC and Icicle Kit
- A reafactor of RISC-V code out of hw/riscv
# gpg: Signature made Thu 10 Sep 2020 19:08:06 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits)
hw/riscv: Sort the Kconfig options in alphabetical order
hw/riscv: Drop CONFIG_SIFIVE
hw/riscv: Always build riscv_hart.c
hw/riscv: Move sifive_test model to hw/misc
hw/riscv: Move sifive_uart model to hw/char
hw/riscv: Move riscv_htif model to hw/char
hw/riscv: Move sifive_plic model to hw/intc
hw/riscv: Move sifive_clint model to hw/intc
hw/riscv: Move sifive_gpio model to hw/gpio
hw/riscv: Move sifive_u_otp model to hw/misc
hw/riscv: Move sifive_u_prci model to hw/misc
hw/riscv: Move sifive_e_prci model to hw/misc
hw/riscv: sifive_u: Connect a DMA controller
hw/riscv: clint: Avoid using hard-coded timebase frequency
hw/riscv: microchip_pfsoc: Hook GPIO controllers
hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs
hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23
hw/net: cadence_gem: Add a new 'phy-addr' property
hw/riscv: microchip_pfsoc: Connect a DMA controller
hw/dma: Add SiFive platform DMA controller emulation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/riscv/trace-events
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl9Z9wkACgkQ+9DbCVqe
KkRbkQf9HLRDEUSy/1LqbU7ncHzgCmnlzC0MKCqn/L3e+M916naO3xhu0tbJN9Ks
nxu9irY1mGrj/gK+gJ9lr50GOvcc8XCFTpE82MisMRWWFeVRt3vYLAql7WcY0ioM
K6jMMfoVswmVetP034llQhsAt9zvFimL89kp4O4i2Mjw5shsBIPfharXnnhL4EgS
ykKmUdLWxAJPSOJJA71IAFP9UzMYfXg7/NHFK1SMVOWZjMT18aoa6YDzBpbr4KzX
4vOvgGK3tBlVuOooSew7By6iR5oBPa5GP7O9Z78osCsyvzJMPcoNxQZyvgnS0Tda
q6+/QeF9/ooDPkg5Jq6Z8EAsY0q+XA==
=PIOR
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-fixes-100920-1' into staging
Various misc and testing fixes:
- Expand CODING_STYLE.rst a little more
- usb-host build fix
- allow check-softfloat unit tests without TCG
- simplify mips imm_branch so compiler isn't confused
- mark ppc64abi32 for deprecation
- more compiler soothing in pch_rev_id
- allow acceptance to skip missing binaries
- more a bunch of plugins to contrib
# gpg: Signature made Thu 10 Sep 2020 10:51:05 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-fixes-100920-1:
plugins: move the more involved plugins to contrib
tests/acceptance: Add Test.fetch_asset(cancel_on_missing=True)
tests: bump avocado version
hw/i386: make explicit clearing of pch_rev_id
configure: don't enable ppc64abi32-linux-user by default
docs/system/deprecated: mark ppc64abi32-linux-user for deprecation
target/mips: simplify gen_compute_imm_branch logic
tests/meson.build: fp tests don't need CONFIG_TCG
usb-host: restrict workaround to new libusb versions
CODING_STYLE.rst: flesh out our naming conventions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's make this file compilable with -Werror=implicit-fallthrough :
Looking at the code, it seems like the fallthrough is intended here,
so we should add the corresponding "/* fallthrough */" comment here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200911125301.413081-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In order to use inclusive terminology, rename host_tsx_blacklisted()
as host_tsx_broken().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200910070131.435543-7-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
One of the Travis builds was complaining about:
qemu/include/tcg/tcg.h:437:12: error: ‘cond’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return (TCGCond)(c ^ 1);
../target/mips/translate.c:20031:13: note: ‘cond’ was declared here
TCGCond cond;
Rather than figure out exactly which one was causing the complaint I
just defaulted to TCG_COND_ALWAYS and allowed that state to double up
for the now defunct bcond_compute variable.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200909112742.25730-5-alex.bennee@linaro.org>
At present the CLINT timestamp is using a hard-coded timebase
frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be
true for all boards.
Add a new 'timebase-freq' property to the CLINT device, and
update various functions to accept this as a parameter.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Now that we have the newly introduced 'resetvec' property in the
RISC-V CPU and HART, instead of hard-coding the reset vector addr
in the CPU's instance_init(), move that to riscv_cpu_realize()
based on the configured property value from the RISC-V machines.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1598924352-89526-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently the reset vector address is hard-coded in a RISC-V CPU's
instance_init() routine. In a real world we can have 2 exact same
CPUs except for the reset vector address, which is pretty common in
the RISC-V core IP licensing business.
Normally reset vector address is a configurable parameter. Let's
create a 64-bit property to store the reset vector address which
covers both 32-bit and 64-bit CPUs.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1598924352-89526-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When the cause number is equal to or greater than 23, print "(unknown)" in
trace_riscv_trap. The max valid number of riscv_excp_names is 23, so the last
excpetion "guest_store_page_fault" can not be printed.
In addition, the current check of cause is invalid for riscv_intr_names. So
introduce riscv_cpu_get_trap_name to get the trap cause name.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200814035819.1214-1-jiangyifei@huawei.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
-----BEGIN PGP SIGNATURE-----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=Hm7N
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200908' into staging
ppc patch queue 2020-09-08
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
# gpg: Signature made Tue 08 Sep 2020 06:19:34 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200908: (33 commits)
spapr_numa: use spapr_numa_get_vcpu_assoc() in home_node hcall
spapr_numa: create a vcpu associativity helper
spapr: move h_home_node_associativity to spapr_numa.c
spapr_numa: move NVLink2 associativity handling to spapr_numa.c
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
spapr, spapr_numa: handle vcpu ibm,associativity
spapr: introduce SpaprMachineState::numa_assoc_array
ppc/spapr_nvdimm: turn spapr_dt_nvdimm() static
ppc: introducing spapr_numa.c NUMA code helper
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
target/s390x: Use start-powered-off CPUState property
sparc/sun4m: Use start-powered-off CPUState property
sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
mips/cps: Use start-powered-off CPUState property
ppc/e500: Use start-powered-off CPUState property
ppc/spapr: Use start-powered-off CPUState property
target/arm: Move setting of CPU halted state to generic code
target/arm: Move start-powered-off property to generic CPUState
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cleanup and fill in VMStateDescription.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl9WkbMdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/fvQf/UvUOipiXP7vafHI1
Qx3NZ3nJHOMRz58eBDLidSkWgQM7+zHjBo1V5CvtM6Ajywpsn4IFe+4SJb7MVAYq
6BSj2VDMq5fCboL52i3xJyBHTE7yqlb4bV3uNSk7dXwf5QQs0sT9PLYp6TuxjSj5
SLicEron3uCc6Y0Z1tX1yKPjl2Lz5PoZ4Z98m6wZhd/pQbbc23+hMlz91fjyVAs2
d9ZDnfxL71XQeTUb5tOLC2OK0rQJDQzzMSAO4Ilnrg/w6k0LGlP/kvYsHI+qya1q
Rm+iBRGZQoItzkzkL1sWXP5StF9xLPRK60cET0N7vMnwN6sbpd3fOOWhE9EDtDWB
tK0wxQ==
=1+dD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-mb-20200907-2' into staging
Use lookup_and_goto_tb.
Cleanup and fill in VMStateDescription.
# gpg: Signature made Mon 07 Sep 2020 21:01:55 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-mb-20200907-2:
configure: Do not set TARGET_ABI32 for microblaze
target/microblaze: Put MicroBlazeCPUConfig into DisasContext
target/microblaze: Fill in VMStateDescription for cpu
target/microblaze: Move mmu parameters to MicroBlazeCPUConfig
target/microblaze: Treat pvr_regs as constant
target/microblaze: Move pvr regs to MicroBlazeCPUConfig
target/microblaze: Reorg MicroBlazeCPUConfig to minimize holes
target/microblaze: Split out MicroBlazeCPUConfig
target/microblaze: Diagnose invalid insns in delay slots
target/microblaze: Use tcg_gen_lookup_and_goto_ptr
target/microblaze: Force rtid, rted, rtbd to exit
target/microblaze: Handle DISAS_EXIT_NEXT in delay slot
target/microblaze: Replace cpustate_changed with DISAS_EXIT_NEXT
target/microblaze: Introduce DISAS_EXIT_NEXT, DISAS_EXIT_JUMP
target/microblaze: Rename DISAS_UPDATE to DISAS_EXIT
target/microblaze: Rename mmu structs
target/microblaze: Cleanup mb_cpu_do_interrupt
target/microblaze: Renumber D_FLAG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Note that this changes behavior by setting cs->halted to 1 on reset, which
didn't happen before.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-9-bauerman@linux.ibm.com>
[dwg: Fix from Laurent Vivier for user only case]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This change is in a separate patch because it's not so obvious that it
won't cause a regression.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-3-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCX1aFfQAKCRD3ErUQojoP
X9kAAP9UgEFiOVCQILI7TSHl2moEjQ7x31CA/Bmod6V+eVKM6QD9Gucjy0KC5DWe
PogywA+CdndMLmH71GN/AFrENVqNnws=
=bbqB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The bulk of the translator should not have access to the
complete cpu state, to avoid the temptation to examine bits
that are in run time, but not translation time context.
We do need access to the constant cpu configuration, and
that is sufficient, so put that into DisasContext.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The final 4 fields in MicroBlazeMMU are configuration constants.
Move them into MicroBlazeCPUConfig where they belong.
Remove the leading "c_" from the member names, as that presumably
implied "config", and that should not be explicit in the location.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow gdb to set the values, and don't bother dumping
unchanging values with -d cpu.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These values are constant, and are derived from the other
configuration knobs. Move them into MicroBlazeCPUConfig
to emphasize that they are not variable.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Sort the elements by type and size, removing a number of holes
and reducing the size of the entire struct.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This struct was previously unnamed, and defined in MicroBlazeCPU.
Pull it out to its own typedef so that we can reuse it.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These cases result in undefined and undocumented behaviour but the
behaviour is deterministic, i.e cores will not lock-up or expose
security issues. However, RTL will not raise exceptions either.
Therefore, log a GUEST_ERROR and treat these cases as nops, to
avoid corner cases which could put qemu into an invalid state.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Normal indirect jumps, or page-crossing direct jumps, can use
tcg_gen_lookup_and_goto_ptr to avoid returning to the main loop
simply to find an existing TB for the next pc.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These return-from-exception type instructions have modified
MSR to re-enable various forms of interrupt. Force a return
to the main loop.
Consolidate the cleanup of tb_flags into mb_tr_translate_insn.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It is legal to put an mts instruction into a delay slot.
We should continue to return to the main loop in that
case so that we recognize any pending interrupts.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than look for the combination of DISAS_NEXT with a separate
variable, go ahead and set is_jmp to the desired state.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like DISAS_EXIT, except we need to update cpu_pc,
either to pc_next or to btarget respectively.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The name "update" suggests that something needs updating, but
this is not the case. Use "exit" to emphasize that nothing
needs doing except to exit.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce typedefs and follow CODING_STYLE for naming.
Rename struct microblaze_mmu to MicroBlazeMMU.
Rename struct microblaze_mmu_lookup to MicroBlazeMMULookup.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reindent; remove dead/commented code.
Use D_FLAG to set ESS[DS].
Sink MSR adjustment for kernel entry, iflags and res_addr clear.
Improve CPU_LOG_INT formatting; report pc and msr before and after.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
ESS[DS] is bit 19 in the manual, but the manual uses big-endian bit
numbering. This corresponds to bit 12 in little-endian numbering.
Let the comment about matching the ESR be true by renumbering it.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several problems here that can result in soft lockup,
depending on exactly where an interrupt or exception is delivered:
Include BIMM_FLAG in IFLAGS_TB_MASK, since it needs to follow D_FLAG.
Ensure that iflags is 0 when entering an interrupt/exception handler.
Add mb_cpu_synchronize_from_tb to restore iflags from tb->flags.
The change to t_sync_flags is cosmetic, but makes the code clearer.
This fixes the reported regression in acceptance/replay_kernel.py.
Fixes: 683a247ed7 ("target/microblaze: Store "current" iflags in insn_start")
Tested-by: Thomas Huth <thuth@redhat.com>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200904190842.2282109-2-richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current qemu hppa emulation emulates a PA1.1 CPU, which can only execute
the 32-bit instruction set. For unknown 64-bit instructions, a instruction trap
is sent to the virtual CPU.
This behaviour is correct in the sense that we emulate what the PA1.1
specification says.
But when trying to boot older Linux installation images, e.g.
ftp://parisc.parisc-linux.org/debian-cd/debian-5.0/lenny-5.0.10-hppa-iso-cd/cdimage.debian.org/debian-5010-hppa-netinst.iso
one finds that qemu fails to boot those images.
The problem is, that in the Linux kernel (e.g. 2.6.26) of those old images
64-bit instructions were used by mistake in the fault handlers. The relevant
instructions (the ",*" indicates that it's a 64-bit instruction) I see are:
0: 09 3e 04 29 sub,* sp,r9,r9
0: 08 3d 06 3d add,* ret1,r1,ret1
0: 0a 09 02 61 or,* r9,r16,r1
0: 0a ba 00 3a andcm,* r26,r21,r26
0: 08 33 02 33 and,* r19,r1,r19
The interesting part is, that real physical 32-bit machines (like the 700/64
and B160L - which is the one we emulate) do boot those images and thus seem to
simply ignore the 64-bit flag on those instructions.
The patch below modifies the qemu instruction decoder to ignore the 64-bit flag
too - which is what real 32-bit hardware seems to do. With this modification
qemu now successfully boots those older images too.
I suggest to apply the patch below - even if it does not reflect what the SPEC
says. Instead it increases the compatibility to really existing hardware and
seem to not create problems if we add real PA2.0 support anytime later.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Until now the TLB size was fixed at 256 entries. To allow operating
systems to utilize more TLB entries in the future, we need to tell
firmware how many TLB entries we actually support in the emulation.
Firmware then reports this to the operating system via the
PDC_CACHE_INFO call.
This patch simply does the preparation to allow more TLB entries.
Signed-off-by: Helge Deller <deller@gmx.de>
