Move the ssi.h include file into the ssi directory.
While touching the code also fix the typdef lines as
checkpatch complains.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the sst25wf080 SPI flash device.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qbus_realize() adds busses as a QOM child of the device in addition to
adding it to the qdev bus list. Change get_child_bus() to use the QOM
child if it is available. This takes priority over the bus-list, but
the child object is checked for type correctness.
This prepares support for aliasing of buses. The use case is SoCs,
where a SoC container needs to present buses to the board level, but
the buses are implemented by controller IP we already model as self
contained qbus-containing devices.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Me52
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 20 Jan 2016 15:37:57 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
iotests: Test that throttle values ranges
blockdev: Error out on negative throttling option values
vmdk: Create streamOptimized as version 3
qcow2: Make image inaccessible after failed qcow2_invalidate_cache()
qcow2: Fix BDRV_O_INACTIVE handling in qcow2_invalidate_cache()
qcow2: Implement .bdrv_inactivate
block: Inactivate BDS when migration completes
block: Rename BDRV_O_INCOMING to BDRV_O_INACTIVE
block: Fix error path in bdrv_invalidate_cache()
block: Assert no write requests under BDRV_O_INCOMING
qcow2: Write full header on image creation
qcow2: Write feature table only for v3 images
block: Clean up includes
qemu-iotests: Reduce racy output in 028
qemu-img: Speed up comparing empty/zero images
block/raw-posix: avoid bogus fixup for cylinders on DASD disks
block: Fix .bdrv_open flags
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=eFG+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-io-next-2016-01-20-1' into staging
I/O channels fixes 2016/01/20 v1
# gpg: Signature made Wed 20 Jan 2016 11:31:47 GMT using RSA key ID 15104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
* remotes/berrange/tags/pull-io-next-2016-01-20-1:
io: use memset instead of { 0 } for initializing array
io: fix description of @errp parameter initialization
io: some fixes to handling of /dev/null when running commands
io: increment counter when killing off subcommand
io: fix sign of errno value passed to error report
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=CccP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-socket-20160120-1' into staging
Convert qemu-socket to use QAPI exclusively, update MAINTAINERS.
# gpg: Signature made Wed 20 Jan 2016 06:49:07 GMT using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-socket-20160120-1:
vnc: distiguish between ipv4/ipv6 omitted vs set to off
sockets: remove use of QemuOpts from socket_dgram
sockets: remove use of QemuOpts from socket_connect
sockets: remove use of QemuOpts from socket_listen
sockets: remove use of QemuOpts from header file
add MAINTAINERS entry for qemu socket code
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
extract_common_blockdev_options() uses qemu_opt_get_number() to parse
the bps/iops numbers to uint64_t, then converts to double and stores in
ThrottleConfig. The actual parsing is done by strtoull() in
parse_option_number(). Negative numbers are wrapped to large positive
ones, and stored.
We used to reject negative numbers since 7d81c1413c, but this regressed
when the option parsing code was changed later. Now fix this again.
This time, define an arbitrary large upper limit (1e15), and check the
values so both negative and impractically big numbers are caught and
reported.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VMware products accept only version 3 for streamOptimized, let's bump
the version.
Reported-by: Radoslav Gerganov <rgerganov@vmware.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If qcow2_invalidate_cache() fails, we are in a state where qcow2_close()
has already been completed, but the image hasn't been reopened yet.
Calling into any qcow2 function for an image in this state will cause
crashes.
The real solution would be to get rid of the close/open pair and instead
do an atomic reset of the involved data structures, but this isn't
trivial, so let's just make the image inaccessible for now.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
What qcow2_invalidate_cache() should do is close the image with
BDRV_O_INACTIVE set and reopen it with the flag cleared. In fact, it
used to do exactly the opposite: qcow2_close() relied on bs->open_flags,
which is already updated to have cleared BDRV_O_INACTIVE at this point,
whereas qcow2_open() was called with s->flags, which has the flag still
set. Fix this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The callback has to ensure that closing or flushing the image afterwards
wouldn't cause a write access to the image files. This means that just
the caches have to be written out, which is part of the existing
.bdrv_close implementation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
So far, live migration with shared storage meant that the image is in a
not-really-ready don't-touch-me state on the destination while the
source is still actively using it, but after completing the migration,
the image was fully opened on both sides. This is bad.
This patch adds a block driver callback to inactivate images on the
source before completing the migration. Inactivation means that it goes
to a state as if it was just live migrated to the qemu instance on the
source (i.e. BDRV_O_INACTIVE is set). You're then supposed to continue
either on the source or on the destination, which takes ownership of the
image.
A typical migration looks like this now with respect to disk images:
1. Destination qemu is started, the image is opened with
BDRV_O_INACTIVE. The image is fully opened on the source.
2. Migration is about to complete. The source flushes the image and
inactivates it. Now both sides have the image opened with
BDRV_O_INACTIVE and are expecting the other side to still modify it.
3. One side (the destination on success) continues and calls
bdrv_invalidate_all() in order to take ownership of the image again.
This removes BDRV_O_INACTIVE on the resuming side; the flag remains
set on the other side.
This ensures that the same image isn't written to by both instances
(unless both are resumed, but then you get what you deserve). This is
important because .bdrv_close for non-BDRV_O_INACTIVE images could write
to the image file, which is definitely forbidden while another host is
using the image.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Instead of covering only the state of images on the migration
destination before the migration is completed, the flag will also cover
the state of images on the migration source after completion. This
common state implies that the image is technically still open, but no
writes will happen and any cached contents will be reloaded from disk if
and when the image leaves this state.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We can only clear BDRV_O_INCOMING if the caches were actually
invalidated.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
As long as BDRV_O_INCOMING is set, the image file is only opened so we
have a file descriptor for it. We're definitely not supposed to modify
the image, it's still owned by the migration source.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
When creating a qcow2 image, we didn't necessarily call
qcow2_update_header(), but could end up with the basic header that
qcow2_create2() created manually. One thing that this basic header
lacks is the feature table. Let's make sure that it's always present.
This requires a few updates to test cases as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Version 2 images don't have feature bits, so writing a feature table to
those images is kind of pointless.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On my machine, './check -qcow2 028' was failing about 80% of the
time, due to a race in how many times the repeated attempts
to run 'info block-jobs' could occur before the job was done,
showing up as a failure of fewer '(qemu) ' prompts than in the
expected output. Silence the output during the repetitions, then
add a final clean command to keep the expected output useful;
once patched, I was finally able to run the test 20 times in a
row with no failures.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Two empty raw files are always compared by actually reading data even if
there is no data, because BDRV_BLOCK_ZERO is considered "allocated" in
bdrv_is_allocated_above(). That is inefficient.
Use bdrv_get_block_status_above() for more information, and skip the
consecutive zero sectors.
This brings a huge speed up in comparing sparse/empty raw images:
$ qemu-img create a 1G
$ time ~/build/master/bin/qemu-img compare a a
Images are identical.
real 0m6.583s
user 0m0.191s
sys 0m6.367s
$ time qemu-img compare a a
Images are identical.
real 0m0.033s
user 0m0.003s
sys 0m0.031s
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some versions of GCC on OS-X complain about CMSG_SPACE
not being constant size, which prevents use of { 0 }
io/channel-socket.c: In function 'qio_channel_socket_writev':
io/channel-socket.c:497:18: error: variable-sized object may not be initialized
char control[CMSG_SPACE(sizeof(int) * SOCKET_MAX_FDS)] = { 0 };
The compiler is at fault here, but it is nicer to avoid
tickling this compiler bug by using memset instead.
Reviewed-By: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The /dev/null file handle was leaked in a couple of places.
There is also the possibility that both readfd and writefd
point to the same /dev/null file handle, so care must be
taken not to close the same file handle twice.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The PCI spec recommends devices use additional alignment for MSI-X
data structures to allow software to map them to separate processor
pages. One advantage of doing this is that we can emulate those data
structures without a significant performance impact to the operation
of the device. Some devices fail to implement that suggestion and
assigned device performance suffers.
One such case of this is a Mellanox MT27500 series, ConnectX-3 VF,
where the MSI-X vector table and PBA are aligned on separate 4K
pages. If PBA emulation is enabled, performance suffers. It's not
clear how much value we get from PBA emulation, but the solution here
is to only lazily enable the emulated PBA when a masked MSI-X vector
fires. We then attempt to more aggresively disable the PBA memory
region any time a vector is unmasked. The expectation is then that
a typical VM will run entirely with PBA emulation disabled, and only
when used is that emulation re-enabled.
Reported-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Tested-by: Shyam Kaushik <shyam.kaushik@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For quirks that support the full PCIe extended config space, limit the
quirk to only the size of config space available through vfio. This
allows host systems with broken MMCONFIG regions to still make use of
these quirks without generating bad address faults trying to access
beyond the end of config space exposed through vfio. This may expose
direct access to the mirror of extended config space, only trapping
the sub-range of standard config space, but allowing this makes the
quirk, and thus the device, functional. We expect that only device
specific accesses make use of the mirror, not general extended PCI
capability accesses, so any virtualization in this space is likely
unnecessary anyway, and the device is still IOMMU isolated, so it
should only be able to hurt itself through any bogus configurations
enabled by this space.
Link: https://www.redhat.com/archives/vfio-users/2015-November/msg00192.html
Reported-by: Ronnie Swanink <ronnie@ronnieswanink.nl>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
large volume DASD that have > 64k cylinders do claim to have
0xFFFE cylinders as special value in the old 16 bit field. We
want to pass this "token" along to the guest, instead of
calculating the real number. Otherwise qemu might fail with
"cyls must be between 1 and 65535"
Cc: qemu-stable@nongnu.org
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_common_open() modified bs->open_flags after inferring the set of
options to pass to the driver's .bdrv_open callback. This means that the
cache options were correctly set in bs->open_flags (and therefore
correctly displayed in 'info block'), but the image would actually be
opened with the default cache mode instead.
This patch removes the flags parameter to bdrv_common_open() (except for
BDRV_O_NO_BACKING it's the same as bs->open_flags anyway, and having two
names for the same thing is confusing), and moves the assignment of
open_flags down to immediately before calling into the block drivers. In
all other places, bs->open_flags is now used consistently.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The VNC code for interpreting QemuOpts does not currently
distinguish between ipv4/ipv6 being omitted, and being
set to 'off', because historically the 'ipv4' and 'ipv6'
options were just flags which did not accept a value.
The upshot is that if someone runs
$QEMU -vnc localhost:1,ipv6=off
QEMU still uses PF_UNSPEC and thus may still bind to IPv6,
when it should use PF_INET.
This is another instance of the problem previously fixed
for chardevs in
commit b77e7c8e99
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Oct 12 15:35:16 2015 +0200
qemu-sockets: fix conversion of ipv4/ipv6 JSON to QemuOpts
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452518225-11751-6-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The socket_dgram method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_dgram_opts helper method. By converting the latter to
use QAPI SocketAddress directly, the QemuOpts conversion
step can be eliminated.
This removes the very last use of QemuOpts from the
sockets code, so the socket_optslist[] array is also
removed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-5-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The socket_connect method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_connect_opts/unix_connect_opts helper methods. By
converting the latter to use QAPI SocketAddress directly,
the QemuOpts conversion step can be eliminated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-4-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The socket_listen method accepts a QAPI SocketAddress object
which it then turns into QemuOpts before calling the
inet_listen_opts/unix_listen_opts helper methods. By
converting the latter to use QAPI SocketAddress directly,
the QemuOpts conversion step can be eliminated
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1452518225-11751-3-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are no callers of the sockets methods which accept
QemuOpts any more. Make all the QemuOpts related functions
static to avoid new callers being added, in preparation
for removal of all QemuOpts usage, in favour of QAPI
SocketAddress.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452518225-11751-2-git-send-email-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1453129403-11357-1-git-send-email-kraxel@redhat.com
When killing the subcommand, it is intended to first send
SIGTERM, then SIGKILL and only report an error if it still
doesn't die after SIGKILL. The 'step' counter was not
being incremented though, so the code never got past the
SIGTERM stage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When reporting the number of FDs has been exceeded, pass
EINVAL to error_setg_errno, rather than -EINVAL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
get_maintainers.pl does not handle parenthesis in maintenance areas well
in connection with list emails (here: qemu-ppc@nongnu.org).
Resolve a recurring CC issue breaking git-send-email by reverting part
of commit 085eb217df ("Add David Gibson
for sPAPR in MAINTAINERS file").
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Otherwise there is a race where the DEVICE_DELETED event has been sent but
attempts to reuse the ID will fail.
Note that similar races exist for other QemuOpts, which this patch
does not attempt to fix.
For example, if the device is a block device, then unplugging it also
deletes its backend. However, this backend's get deleted in
drive_info_del(), which is only called when properties are
destroyed. Just like device_finalize(), drive_info_del() is called
some time after DEVICE_DELETED is sent. A separate patch series has
been sent to plug this other bug. Character devices also have yet to
be fixed.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Currently the ObjectProperty iterator API works as follows:
ObjectPropertyIterator *iter;
iter = object_property_iter_init(obj);
while ((prop = object_property_iter_next(iter))) {
...
}
object_property_iter_free(iter);
This has the benefit that the ObjectPropertyIterator struct
can be opaque, but has the downside that callers need to
explicitly call a free function. It is also not in keeping
with iterator style used elsewhere in QEMU/GLib2.
This patch changes the API to use stack allocation instead:
ObjectPropertyIterator iter;
object_property_iter_init(&iter, obj);
while ((prop = object_property_iter_next(&iter))) {
...
}
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[AF: Fused ObjectPropertyIterator struct with typedef]
Signed-off-by: Andreas Färber <afaerber@suse.de>
When there are many instances of a given class, registering
properties against the instance is wasteful of resources. The
majority of objects have a statically defined list of possible
properties, so most of the properties are easily registerable
against the class. Only those properties which are conditionally
registered at runtime need be recorded against the klass.
Registering properties against classes also makes it possible
to provide static introspection of QOM - currently introspection
is only possible after creating an instance of a class, which
severely limits its usefulness.
This impl only supports simple scalar properties. It does not
attempt to allow child object / link object properties against
the class. There are ways to support those too, but it would
make this patch more complicated, so it is left as an exercise
for the future.
There is no equivalent to object_property_del() provided, since
classes must be immutable once they are defined.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1449505425-32022-4-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
Add a new scripts/clean-includes, which can be used to automatically
ensure that a C source file includes qemu/osdep.h first and doesn't
then include any headers which osdep.h provides already.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-2-git-send-email-peter.maydell@linaro.org
The parameter is called 'tls-creds', 'credid' is just the
variable name in the code.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1452681360-29239-1-git-send-email-w.bumiller@proxmox.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Similarly to the commit 764eb39d1b fixing VNC+SASL+QXL, when starting
QEMU with SPICE but no SASL, and at the same time VNC with SASL, then
spice_server_init() will get called without a previous call to
spice_server_set_sasl_appname(), which will cause cyrus-sasl to
try to use /etc/sasl2/spice.conf (spice-server uses "spice" as its
default appname) rather than the expected /etc/sasl2/qemu.conf.
This commit unconditionally calls spice_server_set_sasl_appname()
before calling spice_server_init() in order to use the correct appname
even if SPICE without SASL was requested on qemu command line.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 1452607738-1521-1-git-send-email-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This pointer should be cleared in vnc_display_close()
otherwise a use-after-free can happen when when using the
old style 'x509' and 'tls' options rather than a persistent
tls-creds -object, by issuing monitor commands to change
the vnc server like so:
Start with: -vnc unix:test.socket,x509,tls
Then use the following monitor command:
change vnc unix:test.socket
After this the pointer is still set but invalid and a crash
can be triggered for instance by issuing the same command a
second time which will try to object_unparent() the same
pointer again.
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Even without line editing, this makes -qmp vc more pleasant with the
GTK+ backend. The only issue is that set_echo is invoked very early,
long before a vc is actually associated with a VirtualConsole. To work
around this, create a temporary VirtualConsole until then.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1450356422-31710-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>