Originally we were storing the GSources tag IDs. That'll be not enough
if we are going to support non-default gcontext for QIO code. Switch to
GSources without changing anything real. Now we still always pass in
NULL, which means the default gcontext.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, introduce an internal qio_channel_add_watch_full(), which
enhances qio_channel_add_watch() that context can be specified.
Then add a new API wrapper qio_channel_add_watch_source() to return a
GSource pointer rather than a tag ID.
Note that the _source() call will keep a reference of GSource so that
callers need to unref them explicitly when finished using the GSource.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It is strange that it was called gio_task_thread_result. Rename it to
follow the naming rule of the file.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Mostly patches that are only indirectly related to the block layer, but I've
reviewed them and there is no maintainer.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJanRBmAAoJEJykq7OBq3PIzQUIAI7q2BFcNEKjNYQusYDA6gJv
7uYiEx1NkcXUu0DVWlCSENGfvQRbYa46oti3MIgu/imMaYwtahefvqA4R2JEy/GS
xRx+LnzVeQ2d3CYLHd1D3ce2BWAIa9bzRDd25Ux2HfDC46a7v5yDPdeRxQF9xgPQ
CwtPKtr5X/xZXUJR3PoC6QqrZUthN5DXOk4cCLJoks6iLpQlNO3jnoq+RXMl+8II
yj0L2sdvi2ebLsuwndXblEg0qR27X94nz0L1j0GDbHir6I13A6Y66a9qv8mTXz/L
poRWaNTHza6KrapseZ85ed6I/IfNODKR2PCfL/CClsHhi5HWRK54nKS3xaWiBUk=
=8zc8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
Mostly patches that are only indirectly related to the block layer, but I've
reviewed them and there is no maintainer.
# gpg: Signature made Mon 05 Mar 2018 09:39:50 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
README: Document 'git-publish' workflow
Add a git-publish configuration file
tests/libqos: Check for valid dev pointer when looking for PCI devices
util/uri.c: wrap single statement blocks with braces {}
util/uri.c: remove brackets that wrap `return` statement's content.
util/uri.c: Coding style check, Only whitespace involved
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v1
iQEcBAABAgAGBQJanLRTAAoJEO8Ells5jWIRAxsH/3wX62o+msLjJHakjcu2OTMG
vdhnB8GfjC5HgMYbovG7TJ95KXg7VRodwru9zgJheTK7DG8fG0nFRuzr8L2tSAph
3s0YTFYDXJ6MBYD//ubdX+jNnchIvMlTX6yheAzcXvQb+nCcN2efN0XpSlGR+g4D
wGi1lWKurGEJE6RUfYPpbbUkjXjbbKyclE0RL+WBmmyruerXI8OxuXQ3GuHK75fb
cZLiToyP9+qnnDyT4lceG5vGRjYLtL8t1nB01M4UTr+tlCkMMsoOjufzGB/CDUdm
oGi1OuKRw06xTLroUJ/uiwSKQH6dMbrv6sLvk92dHnL9k2ZAjv2bVAgz8eAG7o0=
=pPIZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
tap: setting error appropriately when calling net_init_tap_one()
hw/net: Remove unnecessary header includes
net: Add a new convenience option "--nic" to configure default/on-board NICs
net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands
net: Remove the deprecated way of dumping network packets
net: Make net_client_init() static
net: Only show vhost-user in the help text if CONFIG_POSIX is defined
net: List available netdevs with "-netdev help"
net: Move error reporting from net_init_client/netdev to the calling site
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- Markus Armbruster: Modularize generated QAPI code
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJamar4AAoJEKeha0olJ0NqaOcH/js0SXjzfny/qNziZ69I4diF
+hYXpO3MB6XkTME32nFgWpvosG11YaWHkfYbhEgGRIBR8OfmdbnLI5k/1jo9xl/5
OWA/PxVvZ50kK7oVFg1MfX+wDrYOL3XRrwv52LVp9l/QqSSMbcHmt8xYhF1Yb7Ij
JAmcGBVZIeY4k4rXvq1r6TR5f4ItyzkJBPUBtaj2PruSmQPOy+LlOCAjMaO3a+pk
aiRcjbIRWodcC5p5eT7GEdbfEpzxB2iVkyI1SUvDuJKAJfDkBvCE3B/vY7SOdw7I
5rZ4wRSxNHeTX/cjtJSftTrrG/DC4nPTMFGgxlv6ElcP70HhWQFAxoJjdjf6HGw=
=oaW2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-qapi-2018-03-01-v4' into staging
qapi patches for 2018-03-01
- Markus Armbruster: Modularize generated QAPI code
# gpg: Signature made Fri 02 Mar 2018 19:50:16 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-qapi-2018-03-01-v4: (30 commits)
qapi: Don't create useless directory qapi-generated
Fix up dangling references to qmp-commands.* in comment and doc
qapi: Move qapi-schema.json to qapi/, rename generated files
docs: Correct outdated information on QAPI
docs/devel/writing-qmp-commands: Update for modular QAPI
qapi: Empty out qapi-schema.json
Include less of the generated modular QAPI headers
qapi: Generate separate .h, .c for each module
watchdog: Consolidate QAPI into single file
qapi/common: Fix guardname() for funny filenames
qapi/types qapi/visit: Generate built-in stuff into separate files
qapi: Make code-generating visitors use QAPIGen more
qapi: Rename generated qmp-marshal.c to qmp-commands.c
qapi: Record 'include' directives in intermediate representation
qapi: Generate in source order
qapi: Record 'include' directives in parse tree
qapi: Concentrate QAPISchemaParser.exprs updates in .__init__()
qapi: Lift error reporting from QAPISchema.__init__() to callers
qapi/common: Eliminate QAPISchema.exprs
qapi: Improve include file name reporting in error messages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
git-publish [1] is a convenient tool to send patches and has been
popular among QEMU developers. Recently it has been made available in
Fedora/Debian official repo.
One nice feature of the tool is a per-project configuration with
profiles, especially in which the cccmd option is a handy method to
create the Cc list.
[1]: https://github.com/stefanha/git-publish
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 20180226030326.20219-2-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
dev could be NULL if the PCI device can not be found due to some
reasons, so we must not dereference the pointer in this case.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1519713884-2346-1-git-send-email-thuth@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For this patch, using curly braces to wrap `if` `while` `else` statements,
which only hold single statement. For example:
'''
if (cond)
statement;
'''
to
'''
if (cond) {
statement;
}
'''
And using tricks that compare the disassemblies before and after
code changes, to make sure code logic isn't changed:
'''
git checkout master
make util/uri.o
strip util/uri.o
objdump -Drx util/uri.o > /tmp/uri-master.txt
git checkout cleanupbranch
make util/uri.o
strip util/uri.o
objdump -Drx util/uri.o > /tmp/uri-cleanup.txt
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
only remove brackets that wrap `return` statements' content.
use `perl -pi -e "s/return \((.*?)\);/return \1;/g" util/uri.c`
to remove pattern like this: "return (1);"
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1519533358-13759-3-git-send-email-suhang16@mails.ucas.ac.cn
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using `clang-format -i util/uri.c` first, then change back few code
manually, to make sure only whitespace involved.
Signed-off-by: Su Hang <suhang16@mails.ucas.ac.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1519533358-13759-2-git-send-email-suhang16@mails.ucas.ac.cn
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This avoids a name clash for CONFIG_SDL, which is used by both sdl video
support and sdl audio support. It also more clear that this is a audio
driver configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-13-kraxel@redhat.com
Also drop curses libs from libs_softmmu. Add CURSES_{CFLAGS,LIBS}
variables so we can use them for linking the curses module.
Also make target/unicore32/helper.o depend on curses which uses curses
directly for some reason ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-12-kraxel@redhat.com
Also drop gtk and vte libs from libs_softmmu, so the libs are not
pulled in unless the gtk module actually gets loaded.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-11-kraxel@redhat.com
So remove x11 from pkg-config check and don't
add x11 cflags/libs to opengl cflags/libs.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-10-kraxel@redhat.com
Simplifies handling the X11 dependency,
also makes ui/Makefile.objs more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-9-kraxel@redhat.com
If a requested user interface is not available, try loading it as
module, simliar to block layer modules. Needed to keep things working
when followup patches start to build user interfaces as modules.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-8-kraxel@redhat.com
Using the new display registry instead of #ifdefs in vl.c.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-7-kraxel@redhat.com
Add a registry for user interfaces. Add qemu_display_init and
qemu_display_early_init helper functions for display initialization.
Hook up gtk ui as first user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-2-kraxel@redhat.com
If netdev_add tap,id=net0,...,vhost=on failed in net_init_tap_one(),
the followed up device_add virtio-net-pci,netdev=net0 will fail
too, prints:
TUNSETOFFLOAD ioctl() failed: Bad file descriptor TUNSETOFFLOAD
ioctl() failed: Bad file descriptor
The reason is that the fd of tap is closed when error occured after
calling net_init_tap_one().
The fd should be closed when calling net_init_tap_one failed:
- if tap_set_sndbuf() failed
- if tap_set_sndbuf() succeeded but vhost failed to open or
initialize with vhostforce flag on
- with wrong vhost command line parameter
The fd should not be closed just because vhost failed to open or
initialize but without vhostforce flag. So the followed up
device_add can fall back to userspace virtio successfully.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Headers like "hw/loader.h" and "qemu/sockets.h" are not needed in
the hw/net/*.c files. And Some other headers are included via other
headers already, so we can drop them, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The legacy "-net" option can be quite confusing for the users since most
people do not expect to get a "vlan" hub between their emulated guest
hardware and the host backend. But so far, we are also not able to get
rid of "-net" completely, since it is the only way to configure on-board
NICs that can not be instantiated via "-device" yet. It's also a little
bit shorter to type "-net nic -net tap" instead of "-device xyz,netdev=n1
-netdev tap,id=n1".
So what we need is a new convenience option that is shorter to type than
the full -device + -netdev stuff, and which can be used to configure the
on-board NICs that can not be handled via -device yet. Thus this patch now
provides such a new option "--nic": It adds an entry in the nd_table to
configure a on-board / default NIC, creates a host backend and connects
the two directly, without a confusing "vlan" hub inbetween.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
They are deprecated since QEMU v2.10, and so far nobody complained that
these commands are still necessary for any reason - and since you can use
'netdev_add' and 'netdev_remove' instead, there also should not be any
real reason. Since they are also standing in the way for the upcoming
'vlan' clean-up, it's now time to remove them.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
"-net dump" has been marked as deprecated since QEMU v2.10, since it
only works with the deprecated 'vlan' parameter (or hubs). Network
dumping should be done with "-object filter-dump" nowadays instead.
Since nobody complained so far about the deprecation message, let's
finally get rid of "-net dump" now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The function is only used within net.c, so there's no need that
this is a global function.
While we're at it, also remove the unused prototype compute_mcast_idx()
(the function has been removed in commit d9caeb09b1).
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
According to net/Makefile.objs we only link in the vhost-user code
if CONFIG_POSIX has been set. So the help screen should also only
show this information if CONFIG_POSIX has been defined.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Other options like "-chardev" or "-device" feature a nice help text
with the available devices when being called with "help" or "?".
Since it is quite useful, especially if you want to see which network
backends have been compiled into the QEMU binary, let's provide such
a help text for "-netdev", too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
It looks strange that net_init_client() and net_init_netdev() both
take an "Error **errp" parameter, but then do the error reporting
with "error_report_err(local_err)" on their own. Let's move the
error reporting to the calling site instead to simplify this code
a little bit.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Using local m68k floatx80_getman(), floatx80_getexp(), floatx80_scale()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-5-laurent@vivier.eu>
Since f3218a8 ("softfloat: add floatx80 constants")
floatx80_infinity is defined but never used.
This patch updates floatx80 functions to use
this definition.
This allows to define a different default Infinity
value on m68k: the m68k FPU defines infinity with
all bits set to zero in the mantissa.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-4-laurent@vivier.eu>
Using a local m68k floatx80_mod()
[copied from previous:
Written by Andreas Grabher for Previous, NeXT Computer Emulator.]
The quotient byte of the FPSR is updated with
the result of the operation.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-3-laurent@vivier.eu>
Move fpu/softfloat-macros.h to include/fpu/
Export floatx80 functions to be used by target floatx80
specific implementations.
Exports:
propagateFloatx80NaN(), extractFloatx80Frac(),
extractFloatx80Exp(), extractFloatx80Sign(),
normalizeFloatx80Subnormal(), packFloatx80(),
roundAndPackFloatx80(), normalizeRoundAndPackFloatx80()
Also exports packFloat32() that will be used to implement
m68k fsinh, fcos, fsin, ftan operations.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180224201802.911-2-laurent@vivier.eu>
We used to generate first test and later QGA QAPI code into
qapi-generated/. Commit b93b63f574 moved the test code to tests/.
Commit 54c2e50205 moved the QGA code to qga/qapi-generated/. The
directory has been unused since.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-30-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Fix up the reference to qmp-commands.hx in qmp.c. Missed in commit
5032a16d1d.
Fix up the reference to qmp-commands.txt in
docs/xen-save-devices-state.txt. Missed in commit 4d8bb958fa.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-29-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Move qapi-schema.json to qapi/, so it's next to its modules, and all
files get generated to qapi/, not just the ones generated for modules.
Consistently name the generated files qapi-MODULE.EXT:
qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become
qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch].
This gets rid of the temporary hacks in scripts/qapi/commands.py,
scripts/qapi/events.py, and scripts/qapi/common.py.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-28-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain]
Signed-off-by: Eric Blake <eblake@redhat.com>
* Fix guidance on error classes
* Point to generated documentation
* Drop plea for documentation, because the QAPI code generator
enforces it since commit 3313b6124b
* Minor tweaks here and there
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With modular code generation, putting stuff right into
qapi-schema.json is a bad idea. Update writing-qmp-commands.txt
accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-26-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous commit improved compile time by including less of the
generated QAPI headers. This is impossible for stuff defined directly
in qapi-schema.json, because that ends up in headers that that pull in
everything.
Move everything but include directives from qapi-schema.json to new
sub-module qapi/misc.json, then include just the "misc" shard where
possible.
It's possible everywhere, except:
* monitor.c needs qmp-command.h to get qmp_init_marshal()
* monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need
qapi-event.h to get enum QAPIEvent
Perhaps we'll get rid of those some other day.
Adding a type to qapi/migration.json now recompiles some 120 instead
of 2300 out of 5100 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-25-armbru@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
Our qapi-schema.json is composed of modules connected by include
directives, but the generated code is monolithic all the same: one
qapi-types.h with all the types, one qapi-visit.h with all the
visitors, and so forth. These monolithic headers get included all
over the place. In my "build everything" tree, adding a QAPI type
recompiles about 4800 out of 5100 objects.
We wouldn't write such monolithic headers by hand. It stands to
reason that we shouldn't generate them, either.
Split up generated qapi-types.h to mirror the schema's modular
structure: one header per module. Name the main module's header
qapi-types.h, and sub-module D/B.json's header D/qapi-types-B.h.
Mirror the schema's includes in the headers, so that qapi-types.h gets
you everything exactly as before. If you need less, you can include
one or more of the sub-module headers. To be exploited shortly.
Split up qapi-types.c, qapi-visit.h, qapi-visit.c, qmp-commands.h,
qmp-commands.c, qapi-event.h, qapi-event.c the same way.
qmp-introspect.h, qmp-introspect.c and qapi.texi remain monolithic.
The split of qmp-commands.c duplicates static helper function
qmp_marshal_output_str() in qapi-commands-char.c and
qapi-commands-misc.c. This happens when commands returning the same
type occur in multiple modules. Not worth avoiding.
Since I'm going to rename qapi-event.[ch] to qapi-events.[ch], and
qmp-commands.[ch] to qapi-commands.[ch], name the shards that way
already, to reduce churn. This requires temporary hacks in
commands.py and events.py. Similarly, c_name() must temporarily
be taught to munge '/' in common.py. They'll go away with the rename.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-23-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: declare a dummy variable in each .c file, to shut up OSX
toolchain warnings about empty .o files, including hacking c_name()]
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit f0df84c6 added watchdog-set-action in the main qapi-schema.json,
but it belongs better in qapi/run-state.json alongside the definition
of WatchdogAction. The command was written prior to commit 0e201d34
creating the latter file, even though it was merged after.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180226225744.26356-1-eblake@redhat.com>