rtas_start_cpu() calls spapr_cpu_update_tb_offset() and
spapr_cpu_set_endianness() to initialize certain things in the new cpu's
state. This is the only caller of those helpers, and they're each only
a few lines long, so we might as well just fold them into the caller.
In addition, those helpers initialize state on the new cpu to match that of
the first cpu. That will generally work, but might be at least logically
incorrect if the first cpu has been set offline by the guest. So, instead
base the state on that of the cpu invoking the RTAS call, which is
obviously active already.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
This makes several minor cleanups to these functions:
* Follow usual convention of an early exit on error, rather than having
most of the body in an if
* Clearer naming of cpu and cpu_. Now callcpu is the cpu from which the
RTAS call is invoked, newcpu is the cpu which we're starting
* Use cpu_synchronize_state() instead of kvm_cpu_synchronize_state()
directly
* Remove pointless comment describing what cpu_synchronize_state() does
* Use ppc_store_lpcr() instead of directly writing the register field
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Current POWER cpus allow for a VRMA, a special mapping which describes a
guest's view of memory when in real mode (MMU off, from the guest's point
of view). Older cpus didn't have that which meant that to support a guest
a special host-contiguous region of memory was needed to give the guest its
Real Mode Area (RMA).
KVM used to provide special calls to allocate a contiguous RMA for those
cases. This was useful in the early days of KVM on Power to allow it to be
tested on PowerPC 970 chips as used in Macintosh G5 machines. Now, those
machines are so old as to be almost irrelevant.
The normal qemu deprecation process would require this to be marked
deprecated then removed in 2 releases. However, this can only be used
with corresponding support in the host kernel - which was dropped
years ago (in c17b98cf "KVM: PPC: Book3S HV: Remove code for PPC970
processors" of 2014-12-03 to be precise). Therefore it should be ok
to drop this immediately.
Just to be clear this only affects *KVM HV* guests with PowerPC 970,
and those already require an ancient host kernel. TCG and KVM PR
guests with PowerPC 970 should still work.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Thomas Huth <thuth@redhat.com>
Don't print the tv_nsec part of atime and mtime, to stay below the 10
argument limit of trace events.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
During guest OS reboot, guest framebuffer is invalid. It will cause
bugs, if the invalid guest framebuffer is still used by host.
This patch is to introduce vfio_display_reset which is invoked
during vfio display reset. This vfio_display_reset function is used
to release the invalid display resource, disable scanout mode and
replace the invalid surface with QemuConsole's DisplaySurafce.
This patch can fix the GPU hang issue caused by gd_egl_draw during
guest OS reboot.
Changes v3->v4:
- Move dma-buf based display check into the vfio_display_reset().
(Gerd)
Changes v2->v3:
- Limit vfio_display_reset to dma-buf based vfio display. (Gerd)
Changes v1->v2:
- Use dpy_gfx_update_full() update screen after reset. (Gerd)
- Remove dpy_gfx_switch_surface(). (Gerd)
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Message-id: 1524820266-27079-3-git-send-email-tina.zhang@intel.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When trying to build with latest libcacard-2.5.1, I hit the
following error:
In file included from hw/usb/ccid-card-passthru.c:12:0:
/usr/include/cacard/vscard_common.h:26:2: error: #warning "Only <libcacard.h> can be included directly" [-Werror=cpp]
#warning "Only <libcacard.h> can be included directly"
While it was fixed in libcacard upstream (so that individual
files can be included directly), it doesn't make much sense.
Let's switch to including the main libcacard.h and also require
at least libcacard-2.5.1 which introduced it. It's available
since late 2015.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 3c36db1dc0702763ebb7966cc27428ed67d43804.1522751624.git.mprivozn@redhat.com
[ kraxel: fix include path ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
libusb-1.0.22 marked libusb_set_debug deprecated
it is replaced with
libusb_set_option(libusb_context, LIBUSB_OPTION_LOG_LEVEL, libusb_log_level);
details here: 539f22e2fd
Warning here:
CC hw/usb/host-libusb.o
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c: In function 'usb_host_init':
/builds/xen/src/qemu-xen/hw/usb/host-libusb.c:250:5: error: 'libusb_set_debug' is deprecated: Use libusb_set_option instead [-Werror=deprecated-declarations]
libusb_set_debug(ctx, loglevel);
^~~~~~~~~~~~~~~~
In file included from /builds/xen/src/qemu-xen/hw/usb/host-libusb.c:40:0:
/usr/include/libusb-1.0/libusb.h:1300:18: note: declared here
void LIBUSB_CALL libusb_set_debug(libusb_context *ctx, int level);
^~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/builds/xen/src/qemu-xen/rules.mak:66: hw/usb/host-libusb.o] Error 1
make: Leaving directory '/builds/xen/src/xen/tools/qemu-xen-build'
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Message-id: 20180405132046.4968-1-git@johnthomson.fastmail.com.au
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit d7d218ef02 attempted to change
dwProtocols to only advertise support for T=0 and not T=1. The change
was incorrect as it changed 0x00000003 to 0x00010000.
lsusb -v in a linux guest shows:
"dwProtocols 65536 (Invalid values detected)", though the
smart card could still be accessed. Windows 7 does not detect inserted
smart cards and logs the the following Error in the Event Logs:
Source: Smart Card Service
Event ID: 610
Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL:
Incorrect function. If this error persists, your smart card or reader
may not be functioning correctly
Command Header: 03 00 00 00
Setting to 0x00000001 fixes the Windows issue.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-id: 20180420183219.20722-1-jandryuk@gmail.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Although the order doesn't really matter at the moment, it's possible
other initializastions could depend on the compatiblity mode, so make sure
we set it first in spapr_cpu_reset().
While we're at it drop the test against first_cpu. Setting the compat mode
to the value it already has is redundant, but harmless, so we might as well
make a small simplification to the code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The new property ibm,dynamic-memory-v2 allows memory to be represented
in a more compact manner in device tree.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert PPCE500Params to PCCE500MachineClass which it essentially is,
and introduce PCCE500MachineState to keep track of E500 specific
state instead of adding global variables or extra parameters to
functions when we need to keep data beyond machine init
(i.e. make it look like typical fully defined machine).
It's pretty shallow conversion instead of currently used trivial
DEFINE_MACHINE() macro. It adds extra 60LOC of boilerplate code
of full machine definition.
The patch on top[1] will use PCCE500MachineState to keep track of
platform_bus device and add E500Plate specific machine class
to use HOTPLUG_HANDLER for explicitly initializing dynamic
sysbus devices at the time they are added instead of delaying
it to machine done time by platform_bus_init_notify() which is
being removed.
1) <1523551221-11612-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now recent kernels (i.e. since linux-stable commit a346137e9142
("powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes")
support this property to mark initially memory-less NUMA nodes as "possible"
to allow further memory hot-add to them.
Advertise this property for pSeries machines to let guest kernels detect
maximum supported node configuration and benefit from kernel side change
when hot-add memory to specific, possibly empty before, NUMA node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The env->slb_nr field gives the size of the SLB (Segment Lookaside Buffer).
This is another static-after-initialization parameter of the specific
version of the 64-bit hash MMU in the CPU. So, this patch folds the field
into PPCHash64Options with the other hash MMU options.
This is a bit more complicated that the things previously put in there,
because slb_nr was foolishly included in the migration stream. So we need
some of the usual dance to handle backwards compatible migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
The ci_large_pages boolean in CPUPPCState is only relevant to 64-bit hash
MMU machines, indicating whether it's possible to map large (> 4kiB) pages
as cache-inhibitied (i.e. for IO, rather than memory). Fold it as another
flag into the PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Currently env->mmu_model is a bit of an unholy mess of an enum of distinct
MMU types, with various flag bits as well. This makes which bits of the
field should be compared pretty confusing.
Make a start on cleaning that up by moving two of the flags bits -
POWERPC_MMU_1TSEG and POWERPC_MMU_AMR - which are specific to the 64-bit
hash MMU into a new flags field in PPCHash64Options structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
env->sps contains page size encoding information as an embedded structure.
Since this information is specific to 64-bit hash MMUs, split it out into
a separately allocated structure, to reduce the basic env size for other
cpus. Along the way we make a few other cleanups:
* Rename to PPCHash64Options which is more in line with qemu name
conventions, and reflects that we're going to merge some more hash64
mmu specific details in there in future. Also rename its
substructures to match qemu conventions.
* Move structure definitions to the mmu-hash64.[ch] files.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
As a rule we prefer to pass PowerPCCPU instead of CPUPPCState, and this
change will make some things simpler later on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Since commit 7da79a167a, the machine class init function registers
dynamic sysbus device types it supports. Passing an unsupported device
type on the command line causes QEMU to exit with an error message
just after machine init.
It is hence not needed to do the same sanity check at machine reset.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This reverts commit b556854bd8.
Leave change @node type from uint32_t to to int from reverted commit
because node < 0 is always false.
Note that implementing capability or some trick to detect if guest
kernel does not support hot-add to memory: this returns previous
behavour where memory added to first non-empty node.
Signed-off-by: Serhii Popovych <spopovyc@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Both spapr_irq_alloc() and spapr_irq_alloc_block() have an errp
parameter, but they don't use it if XICS hasn't been initialized
yet.
This is doubly wrong:
- all callers do pass a non-null Error **, ie, they expect an error
to be propagated in case of failure
- XICS obviously needs to be initialized before anything starts allocating
IRQs
So this patch turns the check into an assert.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The existing UNINState actually represents the PCI/AGP host bridge stage so
rename it accordingly.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Do this for both the uninorth main and uninorth u3 AGP buses, using the main
PCI bus for each machine (this ensures the IO addresses still match those
used by OpenBIOS).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the OpenPIC is wired up via the board, we can now remove our temporary
PIC qdev pointer property and replace it with an object link instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_u3_agp_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the PCI/AGP host bridges in mac_newworld.c. Now this is complete
it is possible to move the initialisation of the PCI hole alias into
pci_unin_main_init().
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Somewhere in the history of time, the initialisation of the PCI buses for the
AGP and PCI host bridges got mixed up in that the PCI host bridge was
creating an instance of the AGP PCI bus, and the AGP PCI bus was missing.
Swap the PCI host bridge over to use the correct PCI bus (including setting
the kMacRISCPCIAddressSelect register used by MacOS X) and add the missing
reference to the AGP PCI bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the IO address space is fixed to use the standard system IO address
space then we can also use the opportunity to remove the address_space_io
parameter from pci_pmac_init() and pci_pmac_u3_init().
Note we also move the default mac99 PCI bus to the end of the initialisation
list so that it becomes the default destination for any devices specified
via -device without an explicit PCI bus provided.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for moving the PCI bus wiring inside the uninorth
host bridge devices. In the future it will be possible to remove this once the
PICs have been switched to use qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Whilst we are here, rename the memory regions to better reflect whether they
belong to either a PCI or an AGP bus.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Since the macio device has a link to the PIC device, we can now wire up the
IRQs directly via qdev GPIOs rather than having to use an intermediate array.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Introduce constants for the pre-defined Old World IRQs to help keep things
readable.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This simplifies the Old World machine to simply mapping the ISA memory region
into the main address space.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up the grackle device inside the Mac Old World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is the first step towards removing the old-style pci_grackle_init()
function. Following on from the previous commit we can now pass the heathrow
device as an object link and wire up the heathrow IRQs via qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead wire up heathrow to the CPU and grackle PCI host using qdev GPIOs.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This is in preparation for moving the device wiring into the New World machine.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[dwg: Added hw/hw.h #include as suggested by Philippe Mathieu-Daudé]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After QOMification this is clearly no longer needed (and possibly hasn't been
for some time).
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 593c181160: "PPC: Newworld: Add second uninorth control register set"
added a second set of uninorth registers at 0xf3000000.
Testing MacOS 9.2 to MacOS X 10.4 reveals no accesses to this address and I
can't find any reference to it in Apple's Core99.cpp source so I'm assuming
that this was the result of another bug that has now been fixed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This makes sure we keep patchew/checkpatch happy during the remainder of this
patchset.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Saving the current state to xenstore may fail when running restricted
(in particular, after a migration). Therefore, don't report the error or
exit when running restricted. Toolstacks that want to allow running
QEMU restricted should instead make use of QMP events to listen for
state changes.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Xen unstable (to be in 4.11) has two new dmops, relocate_memory and
pin_memory_cacheattr. Use these to set up the VGA memory, replacing the
previous calls to libxc. This allows the VGA console to work properly
when QEMU is running restricted (-xen-domid-restrict).
Wrapper functions are provided to allow QEMU to work with older versions
of Xen.
Tweak the error handling while making this change:
* Report pin_memory_cacheattr errors.
* Report errors even when DEBUG_HVM is not set. This is useful for
trying to understand why VGA is not working, since otherwise it just
fails silently.
* Fix the return values when an error occurs. The functions now
consistently return -1 and set errno.
CC: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
xc_interface_open etc. is not going to work if we have dropped
privilege, but xendevicemodel_shutdown will if everything is new
enough.
xendevicemodel_shutdown is only availabe in Xen 4.10 and later, so
provide a stub for earlier versions.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
We are going to want to reuse this.
No functional change.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>