Read or write to uart registers when unclocked or in reset should be
ignored. Add the check there, and as a result of this, the check in
uart_write_tx_fifo() is now unnecessary.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-6-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This converts uart_read() and uart_write() to memop_with_attrs() ops.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-5-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the clock/reset check is done in uart_receive(), but we
can move the check to uart_can_receive() which is earlier.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210901124521.30599-4-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present when input clock is disabled, any character transmitted
to tx fifo can still show on the serial line, which is wrong.
Fixes: b636db306e ("hw/char/cadence_uart: add clock support")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-3-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As of today, when booting upstream U-Boot for Xilinx Zynq, the UART
does not receive anything. Debugging shows that the UART input clock
frequency is zero which prevents the UART from receiving anything as
per the logic in uart_receive().
From zynq_slcr_reset_exit() comment, it intends to compute output
clocks according to ps_clk and registers. zynq_slcr_compute_clocks()
is called to accomplish the task, inside which device_is_in_reset()
is called to actually make the attempt in vain.
Rework reset_hold() and reset_exit() so that in the reset exit phase,
the logic can really compute output clocks in reset_exit().
With this change, upstream U-Boot boots properly again with:
$ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial stdio \
-device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0
Fixes: 38867cb7ec ("hw/misc/zynq_slcr: add clock generation for uarts")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210901124521.30599-2-bmeng.cn@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
-----BEGIN PGP SIGNATURE-----
Comment: GPGTools - https://gpgtools.org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=HpB5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bsdimp/tags/pull-bsd-user-20210910' into staging
This series of patches gets me to the point that I can run "Hello World" on i386
and x86_64. This is for static binaries only, that are relatively small, but
it's better than the 100% instant mmap failre that is the current state of all
things bsd-user in upstream qemu. Future patch sets will refine this, add
the missing system calls, fix bugs preventing more sophisticated programms
from running and add a bunch of new architecture support.
There's three large themes in these patches, though the changes that
represent them are interrelated making it hard to separate out further.
1. Reorganization to support multiple OS and architectures (though I've only
tested FreeBSD, other BSDs might not even compile yet).
2. Diff reduction with the bsd-user fork for several files. These diffs include
changes that borrowed from linux-user as well as changes to make things work
on FreeBSD. The records keeping when this was done, however, was poor at
best, so many of the specific borrowings are going unacknowledged here, apart
from this general ack. These diffs also include some minor code shuffling.
Some of the changes are done specifically to make it easier to rebase
the bsd-user fork's changes when these land in the tree (a number of changes
have been pushed there to make this more possible).
3. Filling in the missing pieces to make things work. There's many changes to
elfload to make it load things in the right places, to find the interpreter
better, etc. There's changes to mmap.c to make the mappings work better and
there's changes to main.c that were inspired, at least, by now-ancient changes
to linux-user's main.c.
I ran checkpatch.pl on this, and there's 350-odd errors it identifies (the vast
majoirty come from BSD's fetish for tabs), so there will need to be a V2 to fix
this at the very least. In addition, the change set is big (about +~4.5k/-~2.5k
lines), so I anticipate some iteration as well just based on its sheer
size. I've tried to keep each set small to make it easy to review in isolation,
but I've also allowed some interrelated ones to get a little bigger than I'd
normally like. I've not done the customary documentation of the expected
checkpatch.pl output because it is large, and because I wanted to get review
of the other parts rolling to get this project unstuck. Future versions of the
patch will document the expected output.
In addition, I noticed a number of places where I could modernize to make the
code match things like linux-user better. I've resisted the urge to do these at
this time, since it would complicate merging the other ~30k lines of diff that
remains after this batch. Future batches should generally be smaller once this
one has landed since they are, by and large, either a bunch of new files to
support armv7, aarch64, riscv64, mips, mipsel, mips64, ppc, ppc64 and ppc64le,
or are adding system calls, which can be done individually or small groups. I've
removed sparc and sparc64 support as they've been removed from FreeBSD and
have been near totally busted for years.
Stacey Son did the bulk of this work originally, but since I had to move things
around so much and/or retool that work in non-trivial ways, I've kept myself as
author, and added his signed-off-by line. I'm unsure of the qemu standard
practice for this, but am happy to learn if this is too far outside its current
mainstream. For a while Sean Bruno did the merges from upstream, and he's
credited using his signed-off-by in appropriate places, though for this patch
set there's only a few. I've tried to ensure that others who have work in
individual patches that I've aggregated together also are reflected in their
signed-off-by. Given the chaotic stat of the upstream repo for its early
history, this may be the best that can be reconstructed at this late date. Most
of these files are 'foundational' so have existed from the earliest days when
record keeping wasn't quite what I'd wish for in hindsight. There was only
really one change that I could easily cherry-pick (Colin's), so I did that.
# gpg: Signature made Fri 10 Sep 2021 21:24:08 BST
# gpg: using RSA key 2035F894B00AA3CF7CCDE1B76C1CD1287DB01100
# gpg: Good signature from "Warner Losh <wlosh@netflix.com>" [unknown]
# gpg: aka "Warner Losh <imp@bsdimp.com>" [unknown]
# gpg: aka "Warner Losh <imp@freebsd.org>" [unknown]
# gpg: aka "Warner Losh <imp@village.org>" [unknown]
# gpg: aka "Warner Losh <wlosh@bsdimp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2035 F894 B00A A3CF 7CCD E1B7 6C1C D128 7DB0 1100
* remotes/bsdimp/tags/pull-bsd-user-20210910: (42 commits)
bsd-user: Update mapping to handle reserved and starting conditions
bsd-user: Add '-0 argv0' option to bsd-user/main.c
bsd-user: Implement interlock for atomic operations
bsd-user: move gemu_log to later in the file
bsd-user: Refactor load_elf_sections and is_target_elf_binary
bsd-user: elfload.c style catch up patch
bsd-user: add stubbed out core dump support
bsd-user: Add target_os_user.h to capture the user/kernel structures
bsd-user: Add target_arch_reg to describe a target's register set
bsd-user: update debugging in mmap.c
bsd-user: Rewrite target system call definintion glue
bsd-user: Remove dead #ifdefs from elfload.c
bsd-user: elf cleanup
bsd-user: Add architecture specific signal tramp code
bsd-user: Move stack initializtion into a per-os file.
bsd-user: Implement --seed and initialize random state
bsd-user: *BSD specific siginfo defintions
bsd-user: Add system independent stack, data and text limiting
bsd-user: Create target specific vmparam.h
bsd-user: define max args in terms of pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the reserved base based on what platform we're on, as well as the
start of the mmap range. Update routines that find va ranges to interact
with the reserved ranges as well as properly align the mapping (this is
especially important for targets whose page size does not match the
host's). Loop where appropriate when the initial address space offered
by mmap does not meet the contraints.
This has 18e80c55bb from linux-user folded in to the upstream
bsd-user code as well.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Previously it was impossible to emulate a program with a file name
different from its argv[0]. With this change, you can run
qemu -0 fakename realname args
which runs the program "realname" with an argv of "fakename args".
Signed-off-by: Colin Percival <cperciva@tarsnap.com>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the internlock in fork_start() and fork_end() to properly cope
with atomic operations and to safely keep state for parent and child
processes.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out load_elf_sections and is_target_elf_binary out of
load_elf_interp.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Various style fixes to elfload.c that were too painful to make earlier
in this series.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add a stubbed-out version of the bsd-user fork's core dump support. This
allows elfload.c to be almost the same between what's upstream and
what's in qemu-project upstream w/o the burden of reviewing the core
dump support.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This file evolved over the years to capture the user/kernel interfaces,
including those that changed over time.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
target_reg_t is the normal register. target_fpreg_t is the floating
point registers. target_copy_regs copies the registers out of CPU
context for things like core dumps.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update the debugging code for new features and different targets.
Signed-off-by: Mikaël Urankar <mikael.urankar@gmail.com>
Signed-off-by: Sean Bruno <sbruno@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Rewrite target definnitions to interface with the FreeBSD system calls.
This covers basic types (time_t, iovec, umtx_time, timespec, timeval,
rusage, rwusage) and basic defines (mmap, rusage). Also included are
FreeBSD version-specific variations.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
LOW_ELF_STACK doesn't exist on FreeBSD and likely never will. Remove it.
Likewise, remove an #if 0 block that's not useful
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move OS-dependent defines into target_os_elf.h. Move the architectural
dependent stuff into target_arch_elf.h. Adjust elfload.c to use
target_create_elf_tables instead of create_elf_tables.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
Signed-off-by: Justin Hibbits <chmeeedalf@gmail.com>
Signed-off-by: Alexander Kabaev <kan@FreeBSD.ORG>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Add a stubbed out version of setup_sigtramp. This is not yet used for
x86, but is used for other architectures. This will be connected in
future commits.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move all of the stack initialization into target_os_stack.h. Each BSD
sets up processes a little differently.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Copy --seed implementation (translated from linux-user's newer command
line scheme to the older one bsd-user still uses). Initialize the
randomness with the glib if a specific seed is specified or use the
qcrypto library if not.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add FreeBSD, NetBSD and OpenBSD values for the various signal info types
and defines to decode different signals to discover more information
about the specific signal types.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Eliminate the x86 specific stack stuff in favor of more generic control
over the process size:
target_maxtsiz max text size
target_dfldsiz initial data size limit
target_maxdsiz max data size
target_dflssiz initial stack size limit
target_maxssiz max stack size
target_sgrowsiz amount to grow stack
These can be set on a per-arch basis, and the stack size can be set
on the command line. Adjust the stack size parameters at startup.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Target specific values for vm parameters and details.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit platforms, pass in up to 256k of args. For 64-bit, bump that
to 512k.
Signed-off-by: Kyle Evans <kevans@freebsd.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Include more header files to match bsd-user fork.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Update target_arch_elf.h to remove thread_init. Move its contents to
target_arch_thread.h and rename to target_thread_init(). Update
elfload.c to call it. Create thread_os_thread.h to hold the os specific
parts of the thread and threat manipulation routines. Currently, it just
includes target_arch_thread.h. target_arch_thread.h contains the at the
moment unused target_thread_set_upcall which will be used in the future
when creating actual thread (i386 has this stubbed, but other
architectures in the bsd-user tree have real ones). FreeBSD doesn't do
AT_HWCAP, so remove that code. Linux does, and this code came from there.
These changes are all interrelated and could be brokend down, but seem
to represent a reviewable changeset since most of the change is boiler
plate.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Move cpu_loop() into target_cpu_loop(), and put that in
target_arch_cpu.h for each architecture.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the CPU functions into target_arch_cpu.c that are unique to each
CPU. These are defined in target_arch.h.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Save the path to the qemu emulator. This will be used later when we have
a more complete implementation of exec.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Kyle Evans <kevans@FreeBSD.org>
Include host-os.h from main.c to pick up the default OS to emulate. Set
that default in main().
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Host OS specific bits for this implementation go in this file.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All compilers for some time have supported this. Follow linux-user and
eliminate the #define THREAD and unconditionally insert __thread where
needed. Please insert: "(see 24cb36a61c6: "configure: Make NPTL
non-optional")"
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reduce the number of ifdefs by always calling the swapping routine, but
making them empty when swapping isn't needed.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Remove still-born a.out support. The BSDs switched from a.out to ELF 20+ years
ago. It's out of scope for bsd-user, and what little support there was would
simply wind up at a not-implemented message. Simplify the whole mess by removing
it entirely. Should future support be required, it would be better to start from
scratch.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The linux kernel supports a number of different ELF binaries. The Linux userland
emulator inheritted some of that. And we inheritted it from there. However, for
BSD there's only one kind of ELF file supported per platform, so there's no need
to cope with historical quirks. Simply the code as a result.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Use the PATH to find the executable given a bare argument. We need to do
this so we can implement mixing native and emulated binaries (e.g.,
execing a x86 native binary from an emulated arm binary to optimize
parts of the build). By finding the binary, we will know how to exec it.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
It was incorrect to subtract off the size of an unsigned int here. In
bsd-user fork, this change was made when moving the arch specific items
to specific files. The size in BSD that's available for the arguments
does not need a return address subtracted from it.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Pass the bsd_param into loader_exec, and adjust. We use it to track the
inital stack allocation and to set stack, open files, and other state
shared between bsdload.c and elfload.c
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Move the architecture specific defines to target_arch_elf.h and delete
them from elfload.c. Only retain ifdefs appropriate for i386 and x86_64.
Add the copyright/license comments, and guard ifdefs.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
A PS/2 keyboard has a separate command reply queue that is
independent of the key queue. This prevents that command replies
and keyboard input mix. Keyboard command replies take precedence
over queued keystrokes. A new keyboard command removes any
remaining command replies from the command reply queue.
Implement a separate keyboard command reply queue and clear the
command reply queue before command execution. This brings the
PS/2 keyboard emulation much closer to a real PS/2 keyboard.
The command reply queue is located in a few free bytes directly
in front of the scancode queue. Because the scancode queue has
a maximum length of 16 bytes there are 240 bytes available for
the command reply queue. At the moment only a maximum of 3 bytes
are required. For compatibility reasons rptr, wptr and count kept
their function. rptr is the start, wptr is the end and count is
the length of the entire keyboard queue. The new variable cwptr
is the end of the command reply queue or -1 if the queue is
empty. To write to the command reply queue, rptr is moved
backward by the number of required bytes and the command replies
are written to the buffer starting at the new rptr position.
After writing, cwptr is at the old rptr position. Copying cwptr
to rptr clears the command reply queue. The command reply queue
can't overflow because each new keyboard command clears the
command reply queue.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/501
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/502
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210810133258.8231-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Extend the used ps2 buffer size to the available buffer size but
keep the maximum ps2 queue size.
The next patch needs a few bytes of the larger buffer size.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20210810133258.8231-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAmE4oxgeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfZlsIAJg7WX26r0G0fTSI
BnmY/Je968rQcLyCNhpUYRaQAeFzCAIBV/nkcVtiDkFMeFCM3rgn/21sbwgRi/K+
8rRaVT02qcXrUnYniaJcVg51r0aEoMwrt7/GU5utpt21tKIL09ZM5OjFeYHYMFVB
D98rzf1b83rbEp+jiwwuFfVC9blaqokNdHHEJUCWgQEurgZD5iJ6NsqeSdtPppr4
2ujH93lTwyijY/oq7pL5zVGmDsnXYBPz/34ox8XF0OCRBLfil10q1jcQOoJBuql4
GZpe885793xUD/8i1LF3KKsXbz7LbjRij7tFKhvgoeGJRNuuVrP8kNVVyaa6no86
b+UskgA=
=M7sK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210908' into staging
qemu-sparc queue
# gpg: Signature made Wed 08 Sep 2021 12:48:40 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-20210908:
escc: fix STATUS_SYNC bit in R_STATUS register
escc: re-use escc_reset_chn() for soft reset
escc: remove register changes from escc_reset_chn()
escc: implement hard reset as described in the datasheet
escc: implement soft reset as described in the datasheet
escc: introduce escc_hard_reset_chn() for hardware reset
escc: introduce escc_soft_reset_chn() for software reset
escc: reset register values to zero in escc_reset()
escc: checkpatch fixes
sun4m: fix setting CPU id when more than one CPU is present
tcg: Drop gen_io_end()
target/sparc: Drop use of gen_io_end()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These will soon be required to enable nubus devices to support interrupts.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20210830102447.10806-13-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>