rotr operations can be optimized on MIPS32 Release 2 using the ROTR and
ROTRV instructions. Also implemented rotl operations by subtracting the
shift from 32.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
bswap operations can be optimized on MIPS32 Release 2 using the ROTR,
WSBH and SEH instructions. We can't use the non-R2 code to implement the
ops due to registers constraints, so don't define the corresponding
TCG_TARGET_HAS_bswap* values.
Also bswap16* operations are supposed to be called with the 16 high bits
zeroed. This is the case everywhere (including for TCG by definition)
except when called from the store helper. Remove the AND instructions from
bswap16* and move it there.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
MIPS has some conditional branch instructions when comparing with zero.
Use them.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use stack instead of temp_buf array in CPUState for TCG
temps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of int, use the correct TCGArg and TCGReg type: TCGReg when
representing a TCG target register, TCGArg when representing the latter
or a constant.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Recent versions of GCC emit warnings when compiling user mode targets.
Kill them by reordering a bit the #ifdef.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The 'Z' constraint has been introduced to map the zero register. However
when the op also accept a constant, there is no point to accept the zero
register in addition.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.
Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.
Remove unused HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was
broken in that it did not respect the ABI requirement that 64
bit values were passed in even-odd register pairs. The simplest
way to fix this is to implement some new utility functions
for marshalling function arguments into the correct registers
and stack, so that the code which sets up the address and
data arguments does not need to care whether there has been
a preceding env argument.
Based on commit 9716ef3b for ARM by Peter Maydell.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.
On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
sed -i "s/CPUState/CPUArchState/g" $file
done
All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()
The unpatched code won't compile on mips hosts starting with commit
cea5f9a28f.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.
Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.
Revert the hacks to avoid AREG0 use on Sparc hosts.
Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.
Compile the file without HELPER_CFLAGS.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a comment about cache coherency and retranslation, so that people
developping new targets based on existing ones are warned of the issue.
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
TCG on MIPS was trying to avoid changing the branch offset, but didn't
due to a stupid typo. Fix it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Mirror tcg_out_movi in having a TYPE parameter. This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.
Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.
Update all targets to match.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Register fp (frame pointer) is a bad choice for compilations
without optimisation, because the compiler makes heavy use
of this register (so the resulting code crashes).
Register s0 had been used for TCG_AREG1 in earlier releases,
but was no longer used and is now free for TCG_AREG0.
The resulting code works for compilations without
optimisation (tested with qemu mips in qemu mips
on x86 host).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Historically the qemu tlb "addend" field was used for both RAM and IO accesses,
so needed to be able to hold both host addresses (unsigned long) and guest
physical addresses (target_phys_addr_t). However since the introduction of
the iotlb field it has only been used for RAM accesses.
This means we can change the type of addend to unsigned long, and remove
associated hacks in the big-endian TCG backends.
We can also remove the host dependence from target_phys_addr_t.
Signed-off-by: Paul Brook <paul@codesourcery.com>
Some targets (e.g. Alpha and MIPS64) need to keep 32-bit operands
sign-extended in 64-bit registers (regardless of the "real" sign
of the operand). For that, we need to be able to distinguish
between a 32-bit load with a 32-bit result and a 32-bit load with
a given extension to a 64-bit result. This distinction already
exists for the ld* loads, but not the qemu_ld* loads.
Reserve qemu_ld32u for 64-bit outputs and introduce qemu_ld32 for
32-bit outputs. Adjust all code generators to match.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the TCGCond enumeration type in the brcond and setcond
related prototypes in tcg-op.h and each code generator.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Give the enumeration formed from tcg-opc.h a name: TCGOpcode.
Use that enumeration type instead of "int" whereever appropriate.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The address register is overriden when it corresponds to v0 and the fast
path is taken, which leads to a crash. Fix that by using the a0 register
instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Based on a patch from Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
A few words about design choices:
* Two registers, at and t0, are reserved for TCG internal use. They are
useful for bswap and 64-bit ops.
* Most ops supports a constant argument with value 0, which is actually
mapped to the zero register.
* While the at register is available for constant loading, ops only
support a limited range of constants. TCG does a better job doing the
register allocation and constant loading by itself. There are plenty of
registers available anyway.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>