Guests may leave devices in a low power state at reboot, but we expect
devices to be woken up for the next boot. Make this happen.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Often when debugging it's useful to be able to disable bypass paths
so no interactions with the device are missed. Add some extra debug
options to do this. Also add device info on read/write BAR accesses,
which is useful when debugging more than one assigned device. A
couple DPRINTFs also had redundant "vfio:" prefixes.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Graphics cards have a number of different backdoors. Some of these
are alternative ways to get PCI BAR addresses, some of them are
complete mirrors of PCI config space available through MMIO and
I/O port access. These quirks cover a number of ATI Radeon and
Nvidia devices. On the ATI/AMD side, this should enable HD5450
and HD7850 and hopefully a host of devices around those generations.
For Nvidia, my card selection is much more dated. A 8400gs works
well with both the Window shipped driver and the Nvidia downloaded
driver. A 7300le works as well, with the caveat that generating
the Window experience index with the Nvidia driver causes the card
to reset several times before generating a BSOD. An NVS 290 card
seems to run well with the shipped Windows driver, but generates
a BSOD with the Nvidia driver. All of the Nvidia devices work with
the Linux Nvidia proprietary driver and nouveau, the HD5450 works
with either radeon or fglrx, HD7850 works with vesa and fglrx (not
supported by radeon). Extremely limited 3D testing.
Device reset is also an issue with graphics. It's unfortunately
very common that the devices offer no means to reset the card or
doesn't seem effective. Nvidia devices are pretty good about being
able to get the device to a working state through the VGA BIOS init,
Radeon devices less so, and often require a host reboot. Work
remains to be done here.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Most VGA cards need some kind of quirk to fully operate since they
hide backdoors to get to other registers outside of PCI config space
within the registers, but this provides the base infrastructure. If
we could identity map PCI resources for assigned devices we would need
a lot fewer quirks.
To enable this, use a kernel side vfio-pci driver that incorporates
VGA support (v3.9), and use the -vga none option and add the x-vga=on
option for the vfio-pci device. The "x-" denotes this as an
experimental feature. You may also need to use a cached copy of the
VGA BIOS for your device, passing it to vfio-pci using the romfile=
option.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Windows seems to pay particular interest to the PCIe header type of
devices and will fail to load drivers if we attach Endpoint devices or
Legacy Endpoint devices to the Root Complex. We can use
pci_bus_is_express and pci_bus_is_root to determine the bus type and
mangle the type appropriately:
* Legacy PCI
* No change, capability is unmodified for compatibility.
* PCI Express
* Integrated Root Complex Endpoint -> Endpoint
* PCI Express Root Complex
* Endpoint -> Integrated Root Complex Endpoint
* Legacy Endpoint -> none, capability hidden
We also take this opportunity to explicitly limit supported devices
to Endpoints, Legacy Endpoints, and Root Complex Integrated Endpoints.
We don't currently have support for other types and users often cause
themselves problems by assigning them.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Kernel-side vfio virtualizes all of config space, but some parts are
unique to Qemu. For instance we may or may not expose the ROM BAR,
Qemu manages MSI/MSIX, and Qemu manages the multi-function bit so that
single function devices can appear as multi-function and vica versa.
Generalize this into a bitmap of Qemu emulated bits.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
# By Dunrong Huang (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tcx: Remove unused 'addr' field and the property that sets it
hw/i386/pc: format load_linux function
configure: show debug-info option in --help output
Remove the sysbus_add_memory and sysbus_del_memory functions. These
are trivial wrappers for mapping a memory region into the system
memory space, and have no users now. Sysbus devices should never map
their own memory regions anyway; the correct API for mapping an mmio
region is for the creator of the device to use sysbus_mmio_map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure we set the buffer to something in the softusb_read_{dmem,pmem}
error paths, since the caller will use the buffer unconditionally.
(Newer gcc is smart enough to spot this and complain about 'may be
used uninitialized'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1364496184-11994-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't map the pmem and dmem RAM memory regions in the milkymist-softusb
device itself. Instead just expose them as sysbus mmio regions which
the device creator can map appropriately. This allows us to drop the
pmem_base and dmem_base properties. Instead of going via
cpu_physical_memory_read/_write when the device wants to access the
RAMs, we just keep a host pointer to the memory and use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just expose the register buffers memory as a standard sysbus mmio
region which the creator of the device can map, rather than
providing a qdev property which the creator has to set to the
base address and then doing the mapping in the device's own
init function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make musicpal-misc into its own (trivial) qdev device, so we
can get rid of the abuse of sysbus_add_memory().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the SysBusDeviceClass::init optional, for devices which
genuinely don't need to do anything here. In particular, simple
devices which can do all their initialization in their
instance_init method don't need either a DeviceClass::realize
or SysBusDeviceClass::init method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363358063-23973-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Define and use I440FX_PCI_DEVICE() instead of using DO_UPCAST().
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361580039-4459-2-git-send-email-dwmw2@infradead.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-balloon-pci is switched to the new API, we can use QOM
casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-balloon-pci is modified for the new API. The device
virtio-balloon-pci extends virtio-pci. It creates and connects a
virtio-balloon during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-balloon which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove the 'addr' field from TCXState (since it is completely unused),
also the qdev property which sets it. This seems to be a relic from
many years past; devices don't need to know where they are mapped.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When migrating a host with with a spice agent running the mouse becomes
non operational after the migration due to the agent state being
inconsistent between the guest and the client.
After migration the spicevmc backend on the destination has never been notified
of the (non 0) guest_connected state. Virtio-serial holds this state
information and migrates it, this patch properly propagates this information
to virtio-console and through that to interested chardev backends.
rhbz #725965
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-11-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The decrement of avail_connections is done in qdev-properties-system move
the increment there too for proper balancing of the calls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-8-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Most frontends can't really determine if the guest actually has the frontend
side open. So lets automatically generate fe_open / fe_close as soon as a
frontend becomes ready (as signalled by calling qemu_chr_add_handlers) /
becomes non ready (as signalled by setting all handlers to NULL).
And allow frontends which can actually determine if the guest is listening to
opt-out of this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-5-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rename the opened variable to be_open to reflect that it contains the
opened state of the backend.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1364292483-16564-2-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRUfDAAAoJECgfDbjSjVRp5wwH/RiNzEuC0SNuMArXh2LS+qjn
EavcSRTas5800Rl8bW2iYwJV38WhyW7jKs3JxbL5iK6XLeZvr7mureMRpsT6N5cR
WPqoZBw2jIxcHmYZODHTGd9SrAmF2LpfKypN3a86P5P4sQvV/dEusPQx7ZNyi5I5
kdhqNyP6Q6scAUbJVrNUbcOy8euLUtpEO2VQju/gikz2KLsQj6Hyxt9vKV2ZquYU
B7pKvYt5UZhNPqhfBmRptW+U0CMYUPiZBZkZsTEPUibIFHQqGkMD/KtthFFDZc/U
hjxttuETzjACR3KKgegwLVYCFEF8WadPJark4LWb4D9TA1MIdgo2NabNpqYxqrA=
=PY9F
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
virtio,pci,qom
Work by Alex to support VGA assignment,
pci and virtio fixes by Stefan, Jason and myself, and a
new qmp event for hotplug support by myself.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 26 Mar 2013 02:02:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Alex Williamson (13) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony: (23 commits)
pcie: Add endpoint capability initialization wrapper
roms: switch oldnoconfig to olddefconfig
pcie: Mangle types to match topology
pci: Create and use API to determine root buses
pci: Create pci_bus_is_express helper
pci: Q35, Root Ports, and Switches create PCI Express buses
pci: Allow PCI bus creation interfaces to specify the type of bus
pci: Move PCI and PCIE type defines
pci: Create and register a new PCI Express TypeInfo
exec: assert that RAMBlock size is non-zero
pci: refuse empty ROM files
pci_bridge: Remove duplicate IRQ swizzle function
pci_bridge: Use a default map_irq function
pci: Fix INTx routing notifier recursion
pci_bridge: drop formatting from source
pci_bridge: factor out common code
pci: Teach PCI Bridges about VGA routing
pci: Add PCI VGA helpers
virtio-pci: guest notifier mask without non-irqfd
virtio-net: remove layout assumptions for mq ctrl
...
Fix the awkward API of mangling the caller specified PCIe type and
just provide an interface to initialize an endpoint device. This
will pick either a regular endpoint or integrated endpoint based on
the bus and return pcie_cap_init to doing exactly what is asked.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Windows will fail to start drivers for devices with an Endpoint type
PCIe capability attached to a Root Complex (code 10 - Device cannot
start). The proper type for such a device is Root Complex Integrated
Endpoint. Devices don't care which they are, so do this conversion
automatically.
This allows the Windows driver to load for nec-usb-xhci when attached
to pcie.0 of a q35 machine.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Convert q35, ioh3420, xio3130_upstream, and xio3130_downstream to
use the new TYPE_PCIE_BUS.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move these so that we can reference them from a more common header
instead of including pci_bus.h everywhere.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will allow us to differentiate Express and Legacy buses.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A zero size ROM file is invalid and should produce a warning.
Attempting to use a zero size file ends up hitting an assertion
qemu_ram_set_idstr() because RAMBlocks with duplicate addresses are
allocated - due to zero size the allocator doesn't increment the next
available RAMBlock offset.
Also convert __FUNCTION__ to __func__ while we're touching this code.
There are no other __FUNCTION__ instances in pci.c anymore.
Reported-by: Milos Ivanovic <milosivanovic@orcon.net.nz>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_bridge_dev_map_irq_fn() is identical to pci_swizzle_map_irq_fn(),
which is now the default for all PCI bridges. We can therefore remove
this function and the pci_bridge_map_irq() call that used it.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The PCI bridge spec defines a default swizzle for translating INTx
IRQs from secondary bus to primary. Use this by default for any
bridge that doesn't set a function.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For some reason we recurse to fire the INTx routing notifier for each
child of a bus, for each possible device of a bus. That means that if
we add a root port, the notifier gets called for that bridge 256
times. If we add an upstream switch behind that root port, 256^2. But
of course we need a downstream switch, 256^3. This starts to be
noticeable. Stop the insanity.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the same formatting for all files, it
doesn't make sense to have formatting directives only
in pci bridge header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reuse common code in pcie_port, override the hardwired-to-0
bits per PCI Express spec.
No functional change but makes the code easier to follow.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Each PCI Bridge has a set of implied VGA regions that are enabled when
the VGA bit is set in the bridge control register. This allows VGA
devices behind bridges. Unfortunately with VGA Enable, which we
formerly allowed but didn't back, comes along some required VGA
baggage. VGA Palette Snooping is required, along with VGA 16-bit
decoding. We don't yet have support for palette snooping.
We also don't have support for 10-bit VGA aliases, the default mode, but
we enable the register, even on root ports, to avoid confusing guests.
Fortunately there's likely nothing from this century that requires these
features, so the missing bits are noted with TODOs.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow devices to register VGA memory regions for handling PCI spec
defined VGA I/O port and MMIO areas. PCI will attach these to the
bus address spaces and enable them according to the device command
register value.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
non-irqfd setups are currently broken with vhost:
we start up masked and nothing unmasks the interrupts.
Fix by using mask notifiers, same as the irqfd path.
Sharing irqchip/non irqchip code is always a good thing,
in this case it will help non irqchip benefit
from backend masking optimization.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
