Demo QemuOpts in action ;)
Implementing a alternative way to specify the filename should be
just a few lines of code now once we decided how the cmd line syntax
should look like.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This stores device parameters in a better way than unparsed strings.
New types:
QemuOpt - one key-value pair.
QemuOpts - group of key-value pairs, belonging to one
device, i.e. one drive.
QemuOptsList - list of some kind of devices, i.e. all drives.
Functions are provided to work with these types. The plan is that some
day we will pass around QemuOpts pointers instead of strings filled with
"key1=value1,key2=value2".
Check out the next patch to see all this in action ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
cleanup pretty simliar to the drives_table removal patch:
- drop the table and make a linked list out of it.
- pass around struct pointers instead of table indices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-drive accepts the new id= now, allowing to explicitely name your
drives. They will show up with that name in "info block" if specified,
otherwise the existing namimg scheme is used to autogenerate one.
There is also a new function to lookup drives by name. Not used yet.
The plan is to link disk drivers and drives using the drive id instead
of passing around pointers to BlockDriveState.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
First step cleaning up the drives handling. This one does nothing but
removing drives_table[], still it became seriously big.
drive_get_index() is gone and is replaced by drives_get() which hands
out DriveInfo pointers instead of a table index. This needs adaption in
*tons* of places all over.
The drives are now maintained as linked list.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hook i44fx pcihost into sysbus.
Convert Host bridge and ISA bridge pci devices to qdev.
Tag as no-user.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The -device switch is the users frontend to the qdev_device_add function
added by the previous patch.
Also adds a linked list where command line options can be saved.
Use it for the new -device and for the -usbdevice and -bt switches.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch implements a parser and qdev tree walker for bus paths and
adds qdev_device_add on top of this.
A bus path can be:
(1) full path, i.e. /i440FX-pcihost/pci.0/lsi/scsi.0
(2) bus name, i.e. "scsi.0". Best used together with id= to make
sure this is unique.
(3) relative path starting with a bus name, i.e. "pci.0/lsi/scsi.0"
For the (common) case of a single child bus being attached to a device
it is enougth to specify the device only, i.e. "pci.0/lsi" will be
accepted too.
qdev_device_add() adds devices and accepts bus= parameters to find the
bus the device should be attached to. Without bus= being specified it
takes the first bus it finds where the device can be attached to (i.e.
first pci bus for pci devices, ...).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create a default bus name if none is passed to qbus_create().
If the parent device has DeviceState->id set it will be used to create
the bus name,. i.e. -device lsi,id=foo will give you a scsi bus named
"foo.0".
If there is no id BusInfo->name (lowercased) will be used instead, i.e.
-device lsi will give you a scsi bus named "scsi.0".
A scsi adapter with two scsi busses would have "scsi.0" and "scsi.1" or
"$id.0" and "$id.1" busses. The numbers of the child busses are per
device, i.e. when adding two lsi adapters both will have a "*.0" child
bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
So we can parse "$slot.$fn" strings into devfn numbers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pc-0.11 type allows users of qemu-0.11 to use a machine type which
they know will remain compatible when the upgrade to qemu-0.12.
Management tools may choose to canonicalize the 'pc' machine type to
'pc-0.11' so that if the 'pc' alias changes target in future versions
of qemu, the machine type used will remain compatible.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add an 'alias' field to QEMUMachine and display it in the output of
'qemu -M ?' with an '(aliased to foo)' suffix.
Aliases can change targets in newer versions of qemu, so management tools
may choose canonicalize machine types to ensure that if a user chooses an
alias, that the actual machine type used will remain compatible in
future.
This is intended to mimic a symlink to a machine description file.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows a program to initialize a host networking device using a
file descriptor passed over a unix monitor socket.
The program must first pass the file descriptor using SCM_RIGHTS
ancillary data with the getfd monitor command. It then may do
"host_net_add tap fd=name" to use the named file descriptor.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add monitor commands to support passing file descriptors via
SCM_RIGHTS.
getfd assigns the passed file descriptor a name for use with other
monitor commands.
closefd allows passed file descriptors to be closed. If a monitor
command actually uses a named file descriptor, closefd will not be
required.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If a file descriptor is passed via a message with SCM_RIGHTS ancillary
data on a unix socket, store the file descriptor for use in the
chr_read() handler. Close the file descriptor if it was not used.
The qemu_chr_get_msgfd() API provides access to the passed descriptor.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Split out tcp_chr_recv() out of tcp_chr_read() and implement it on
non-win32 using recvmsg(). This is needed for a subsequent patch
which implements SCM_RIGHTS support.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
- implement "used" bit in tlb translation entry
- mark tlb entry used if qemu code/data translation succeeds
- fold i/d mmu replacement writes code into replace_tlb_1bit_lru which
adds 1bit lru replacement algorithm; previously code tried to replace
first unlocked entry only
- extract more bitmasks to named macros
- add "immu" or "dmmu" type name to debugging output where appropriate
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
- add names to mmu registers, this helps understanding the code which
uses/modifies them.
- fold i/d mmu tlb entries tag and tte arrays into arrays of tlb entries
- extract demap_tlb routine (code duplication)
- extract replace_tlb routine (code duplication)
- flush qemu tlb translations when replacing sparc64 mmu tlb entries
I have no test case which demands flushing qemu translations,
and this patch should have no other visible changes to runtime.
Signed-off-by: igor.v.kovalenko@gmail.com
--
Kind regards,
Igor V. Kovalenko
My self-built PPC kernel doesn't fit in the region reserved for
the kernel, so I can't use -kernel with it.
Let's just extend the region.
Signed-off-by: Alexander Graf <agraf@suse.de>
When giving KVM a slot of a size not on page boundary, it chokes. So let's
just round up the VGA BIOS size so nobody complains anymore and we don't need
to implement sub-page slots.
Required for booting a PPC guest in KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
KVM can have an in-kernel pit or irqchip. While we don't implement it
yet, having a way for test for it (that always returns zero) will allow us
to reuse code in qemu-kvm that tests for it.
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fixes
qemu-thread.c: In function `qemu_thread_equal':
qemu-thread.c:161: error: invalid operands to binary ==
Use of pthread_equal suggested by Filip Navara.
Signed-off-by: Sebastian Herbszt <herbszt@gmx.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When starting a qemu binary directly from the build directory and that
dir is located outside the source files, the search for bios files
fails. Fix this by linking them from the build to the source directory.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Attached patch makes signrom.sh working on NetBSD.
The output of the 'od' command leads to a syntax error
which breaks the build.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a backport from qemu-kvm. Just instead of using kvm's specific
notification mechanism, we use qemu_notify_event()
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
on_vcpu is a qemu-kvm function that will make sure that a specific
piece of code will run on a requested cpu. We don't need that because
we're restricted to -smp 1 right now, but those days are likely to end soon.
So for the benefit of having qemu-kvm share more code with us, I'm
introducing our own version of on_vcpu(). Right now, we either run
a function on the current cpu, or abort the execution, because it would
mean something is seriously wrong.
As an example code, I "ported" kvm_update_guest_debug to use it,
with some slight differences from qemu-kvm.
This is probably 0.12 material
Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace the use of atoi which is used for pattern parsing currently with
strtol. Atoi won't parse sedecimal pattern values (it always returns 0),
but qemu-iotests use such pattern values. Also reject every pattern
that is not a unsigned char as we pass the pattern to memset which
expect a bye value (despite having the pattern argument declared as int).
Based on an earlier patch by Stefan Weil which did not include the
error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The alloc command in qemu-io is mostly useless currently. Instead of doing a
single call to bdrv_is_allocated, we must call bdrv_is_allocated in a loop
until we have found out for each requested sector if it is allocated or not
(bdrv_is_allocated returns a number of sectors that are known to be in the same
state as the first one, but it is not required to include all of them)
This changes the output format of the alloc command so that a change to the
expected output of qemu-iotests 019 is necessary once this is included.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make 'qemu-img convert' copies unallocated parts of the source image
when -B option was not specified.
Signed-off-by: Akkarit Sangpetch <asangpet@andrew.cmu.edu>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of storing the backing file in its own BlockDriverState, VMDK uses the
BlockDriverState of the raw image file it opened. This is wrong and breaks
functions that access the backing file or protocols. This fix replaces all
occurrences of s->hd->backing_* with bs->backing_*.
This fixes qemu-iotests failure in 020 (Commit changes to backing file).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch requires "Handle BH's queued by AIO completions in
qemu_aio_flush()" to work reliably. The combination of those two
patches survived 300+ migrations with heavy IO load running in the
guest.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this, the call to qemu_aio_flush during migration doesn't
actually flush all in-flight SCSI IOs.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some KVM platforms don't support dirty logging yet, like IA64 and PPC,
so in order to still have screen updates on those, we need to fake it.
This patch just tells the getter function for dirty bitmaps, that all
pages within a slot are dirty when the slot has dirty logging enabled.
That way we can implement dirty logging on those platforms sometime when
it drags down performance, but share the rest of the code with dirty
logging capable platforms.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
440 and desktop codes use different input constants for interrupt indication.
Let's use the respective ones for KVM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes a warning I stumbled across while compiling qemu on PPC64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We need to tell the kernel about some initial CPU state we don't have yet,
so let's use the "sregs" IOCTL for that and simply put the Processor Version
Register in there.
Now the kernel knows which guest CPU to virtualize.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We now have KVM on PPC64 too and might get it on PPC32 as well, as soon
as someone writes it.
So let's enable KVM for PPC32 and PPC64 targets.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>