We have several tests that perform multiple sub-actions that are
expected to fail. Asserting that an error occurred, then clearing
it up to prepare for the next action, turned into enough
boilerplate that it was sometimes forgotten (for example, a number
of tests added to test-qmp-input-visitor.c in d88f5fd leaked err).
Worse, if an error is not reset to NULL, we risk invalidating
later use of that error (passing a non-NULL err into a function
is generally a bad idea). Encapsulate the boilerplate into a
single helper function error_free_or_abort(), and consistently
use it.
The new function is added into error.c for use everywhere,
although it is anticipated that testsuites will be the main
client.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
By using &error_abort, we can avoid a local err variable in
situations where we expect success. It also has the nice
effect that if the test breaks, the error message from
error_abort tends to be nicer than that of g_assert().
This patch has an additional bonus of fixing several call sites that
were passing &err to two different functions without checking it in
between. In general that is unsafe practice; because if the first
function sets an error, the second function could abort() if it tries to
set a different error. We got away with it because we were asserting
that err was NULL through the entire chain, but switching to
&error_abort avoids the questionable practice up front.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-7-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make valgrind happy with the current state of the tests, so that
it is easier to see if future patches introduce new memory problems
without being drowned in noise. Many of the leaks were due to
calling a second init without tearing down the data from an earlier
visit. But since teardown is already idempotent, and we already
register teardown as part of input_visitor_test_add(), it is nicer
to just make init() safe to call multiple times than it is to have
to make all tests call teardown.
Another common leak was forgetting to clean up an error object,
after testing that an error was raised.
Another leak was in test_visitor_in_struct_nested(), failing to
clean the base member of UserDefTwo. Cleaning that up left
check_and_free_str() as dead code (since using the qapi_free_*
takes care of recursion, and we don't want double frees).
A final leak was in test_visitor_out_any(), which was reassigning
the qobj local variable to a subset of the overall structure
needing freeing; it did not result in a use-after-free, but
was not cleaning up all the qdict.
test-qmp-event and test-qmp-commands were already clean.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-6-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Rather than duplicate the body of two functions just to
decide between qobject_from_jsonv() and qobject_from_json(),
exploit the fact that qobject_from_jsonv() intentionally
takes 'va_list *' instead of the more common 'va_list', and
that qobject_from_json() just calls qobject_from_jsonv(,NULL).
For each file, our two existing init functions then become
thin wrappers around a new internal function, and future
updates to initialization don't have to be duplicated.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-5-git-send-email-eblake@redhat.com>
[Two old comment typos fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Adding an assertion to qobject_decref() will ensure that a
programming error causing use-after-free will result in
immediate failure (provided no other thread has started
using the memory) instead of silently attempting to wrap
refcnt around and leaving the problem to potentially bite
later at a harder point to diagnose.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-4-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make each list element different, to ensure that order is
preserved, and use the generated free function instead of
hand-rolling our own to ensure (under valgrind) that the
list is properly cleaned.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-3-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Commit d88f5fd and friends first introduced the various test-qmp-*
tests in 2011, with duplicated hand-rolled TestStruct machinery,
to make sure the qapi visitor interface was tested. Later, commit
4f193e3 in 2013 added a .json file for further testing use by the
files, but without consolidating any of the existing hand-rolled
visitors. And with four copies, subtle differences have crept in,
between the tests themselves (mainly whitespace differences, but
also a question of whether to use NULL or "TestStruct" when
calling visit_start_struct()) and from what the generator produces
(the hand-rolled versions did not cater to partially-allocated
objects, because they did not have a deallocation usage).
Of course, just because the visitor interface is tested does not
mean it is a sane interface; and future patches will be changing
some of the visitor contracts. Rather than having to duplicate
the cleanup work in each copy of the TestStruct visitor, and keep
each hand-rolled copy in sync with what the generator supplies, we
might as well just test what the generator should give us in the
first place.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1446791754-23823-2-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
This one slipped through. Although we acquire AioContext when
committing all devices we don't for just a single device.
AioContext must be acquired before calling bdrv_*() functions to
synchronize access with other threads that may be using the AioContext.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To minimize code duplication, epoll is hooked into aio-posix's
aio_poll() instead of rolling its own. This approach also has both
compile-time and run-time switchability.
1) When QEMU starts with a small number of fds in the event loop, ppoll
is used.
2) When QEMU starts with a big number of fds, or when more devices are
hot plugged, epoll kicks in when the number of fds hits the threshold.
3) Some fds may not support epoll, such as tty based stdio. In this
case, it falls back to ppoll.
A rough benchmark with scsi-disk on virtio-scsi dataplane (epoll gets
enabled from 64 onward). Numbers are in MB/s.
===============================================
| master | epoll
| |
scsi disks # | read randrw | read randrw
-------------|----------------|----------------
1 | 86 36 | 92 45
8 | 87 43 | 86 41
64 | 71 32 | 70 38
128 | 48 24 | 58 31
256 | 37 19 | 57 28
===============================================
To comply with aio_{disable,enable}_external, we always use ppoll when
aio_external_disabled() is true.
[Removed #ifdef CONFIG_EPOLL around AioContext epollfd field declaration
since the field is also referenced outside CONFIG_EPOLL code.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446177989-6702-4-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is the place to initialize platform specific bits of AioContext.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446177989-6702-3-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows AioContext users to check the enable/disable state of
external clients.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1446177989-6702-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bring_map currently fails if one of the entries it's mapping is
contigious in GPA but not HVA address space. Introduce a mapped_len
parameter so it can handle this, returning the actual mapped length.
This will still fail if there's no space left in the sg, but luckily max
queue size in use is currently 256, while max sg size is 1024, so we
should be OK even is all entries happen to cross a single DIMM boundary.
Won't work well with very small DIMM sizes, unfortunately:
e.g. this will fail with 4K DIMMs where a single
request might span a large number of DIMMs.
Let's hope these are uncommon - at least we are not breaking things.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Reported-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-2-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use address_space_read to make sure we handle the case of an indirect
descriptor crossing DIMM boundary correctly.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1446047243-3221-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A small update to TCG code so it can handle the new
clflushopt/clwb/pcommit instructions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=xPO9
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-pull-request' into staging
target-i386: tcg: Handle clflushopt/clwb/pcommit instructions
A small update to TCG code so it can handle the new
clflushopt/clwb/pcommit instructions.
# gpg: Signature made Sat 07 Nov 2015 14:50:54 GMT using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
* remotes/ehabkost/tags/x86-pull-request:
target-i386: Add clflushopt/clwb/pcommit to TCG_7_0_EBX_FEATURES
target-i386: tcg: Check right CPUID bits for clflushopt/pcommit
target-i386: tcg: Accept clwb instruction
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a Sysbus AHCI subclass for the Allwinner AHCI. It has a few extra
vendor specific registers which are used for phy and power init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 833b5b05ed5ade38bf69656679b0a7575e79492b.1445917756.git.crosthwaite.peter@gmail.com
[resolved patch context on pull --js]
Signed-off-by: John Snow <jsnow@redhat.com>
Do the init level tasks asap and the realize later (mainly when
num_ports is available). This allows sub-class realize routines
to work with the device post-init.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 1a7c7b2b32e5ccf49373a5065da5ece89730d3ac.1445917756.git.crosthwaite.peter@gmail.com
Signed-off-by: John Snow <jsnow@redhat.com>
Not that you can request a >2GiB transaction, but that's why checking
for it makes no sense anymore.
With the newer 'limit' parameter to prepare_buf, we no longer need a
static limit. The maximum limit is still 2GiB, but the limit parameter
is set to the current transaction size, which cannot surpass 32MiB
(512 * 65536). If the PRDT surpasses the transactional size, then,
we'll just carry out the normative underflow handling pathways instead
of needing an extra, strange pathway that worries about hitting some
logistical cap for the largest sglist we can support -- we'll never
even attempt to build one that big anymore.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1445902682-20051-1-git-send-email-jsnow@redhat.com
Now these instructions are handled by TCG and can be added to the
TCG_7_0_EBX_FEATURES macro.
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Detect the clflushopt and pcommit instructions and check their
corresponding feature flags, instead of checking CPUID_SSE and
CPUID_CLFLUSH.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Accept the clwb instruction (66 0F AE /6) if its corresponding feature
flag is enabled on CPUID[7].
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJWPKBDAAoJEL7lnXSkw9fbvIUH/iQGqb1GKzTmXhZkOCWygG9u
+XNwGjXsGI0gDSy/F8UFltvmcz5NdRVu2nf0g3PgNWneBMHeJ0LyuHnAZrYIqMAT
eo0AMT3yX9Vg4pCMdA+u9ps39NfYGh3Lvmn9Lhy6T3fc1OicoV8B5Yw5Oln6DeZv
VrKRum3Pxqkb8bENEvdY3RhpUEN60fL9bRHX0nf8VRGzXW3+WSNjvH3NYGoUg7r7
L+6SHfQWdFS6pUQbvP+VCrDkgw+MhbILEUnswXRiy501rMLj01mi5C1MG58IusKQ
bFxLLv2eGy+Lpd6YThvNhR+y2uKQVzAwx1C/pen2wxvWGt7rrolLgdIc33HEKKU=
=HJM2
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2015-11-06' into staging
trivial patches for 2015-11-06
# gpg: Signature made Fri 06 Nov 2015 12:42:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2015-11-06: (24 commits)
tap-bsd: use user-specified tap device if it already exists
qemu-sockets: do not test path with access() before unlinking
taget-ppc: Fix read access to IBAT registers higher than IBAT3
exec: avoid unnecessary cacheline bounce on ram_list.mru_block
target-alpha: fix uninitialized variable
ivshmem-server: fix possible OVERRUN
pci-assign: do not test path with access() before opening
qom/object: fix 2 comment typos
configure: remove help string for 'vnc-tls' option
usb: Use g_new() & friends where that makes obvious sense
qxl: Use g_new() & friends where that makes obvious sense
ui: Use g_new() & friends where that makes obvious sense
bt: fix use of uninitialized variable seqlen
hw/dma/pxa2xx: Remove superfluous memset
linux-user/syscall: Replace g_malloc0 + memcpy with g_memdup
tests/i44fx-test: No need for zeroing memory before memset
hw/input/tsc210x: Remove superfluous memset
xen: fix invalid assertion
tests: ignore test-qga
fix bad indentation in pcie_cap_slot_write_config()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
This is not one such case; on the other hand, access() *will* skip
unlink() for a non-existent path, so ignore ENOENT return values from
the unlink() system call.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fix the index used to read the IBAT's vector which results in IBAT0..3 instead
of IBAT4..N.
The bug appeared by saving/restoring contexts including IBATs values.
Signed-off-by: Julio Guerra <julio@farjump.io>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Whenever the MRU cache hits for the list of RAM blocks, qemu_get_ram_block
does an unnecessary write that causes a processor cache line to bounce
from one core to another. This causes a performance hit.
Reported-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
I am not sure why the compiler does not catch it. There is no
semantic change since gen_excp returns EXIT_NORETURN, but the
old code is wrong.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Using access() is a time-of-check/time-of-use race condition. It is
okay to use them to provide better error messages, but that is pretty
much it.
In this case we can get the same error from fopen(), so just use
strerror and errno there---which actually improves the error
message most of the time.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Also change the misleading definition of macro OBJECT_CLASS_CHECK
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The '--enable-vnc-tls' option to configure was removed in
commit 3e305e4a47
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Thu Aug 6 14:39:32 2015 +0100
ui: convert VNC server to use QCryptoTLSSession
This removes the corresponding help string.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
sdp_svc_match, sdp_attr_match and sdp_svc_attr_match read the last
argument. The only sensible way to change the code is to make that last
argument "len" instead of "seqlen" which is the length of a subsequence
in the previous "if" branch.
To make the structure of the code clearer, use "else" instead of
"else if".
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_malloc0 already clears the memory, so no need for
the additional memset here. And while we're at it,
also convert the g_malloc0 to the preferred g_new0.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
No need to use g_malloc0 to zero the memory if we memcpy to
the whole buffer afterwards anyway. Actually, there is even
a function which combines both steps, g_memdup, so let's use
this function here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Change a g_malloc0 into g_malloc since the following
memset fills the whole buffer anyway.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
g_malloc0 already clears the memory, so no need for additional
memsets here. And while we're at it, let's also remove the
superfluous typecasts for the return values of g_malloc0
and use the type-safe g_new0 instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Asserting "true" is not that useful.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 62c39b30 added a new test, but did not mark it for
exclusion in .gitignore.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit a75eb03b added ivshmem-client and ivshmem-server binaries,
but did not mark them for exclusion in .gitignore.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The tcx_initfn() function is already supplied with an
Object *obj pointer, so there is no need to cast the
state pointer back to an Object pointer all over the
place. And while we're at it, also remove the superfluous
"return;" statement in this function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Some places in gdb_handle_packet() can get an arbitrary length (most
times directly from the client) and either didn't check it at all or
checked against the wrong value, potentially causing buffer overflows.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>