The 32 R5900 128-bit registers are split into two 64-bit halves:
the lower halves are the GPRs and the upper halves are accessible
by the R5900-specific multimedia instructions.
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Rename 'rn' to 'register_name' in CP0-related handlers.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add CP0 register MemoryMapID. Only data field is added.
The corresponding functionality will be added in future
patches.
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Correct existing CP0-related preprocessor constants (replace
"CPO" with "CP0" (form letter "O" to digit "0", when needed).
Besides, add preprocessor constants for CP0 subregisters.
The names of the subregisters were chosen to be in sync with
the table of corresponding assembler mnemonics found in the
documentation for I6500 and I6400 (release 1.0).
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update ITU to handle bus errors.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Update ITU to utilize SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add field and R/W access to ITU control register ICR0.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Provide R/W access to SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add fields for SAARI and SAAR CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Use preprocessor constants for 32 major CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Add preprocessor constants for 32 major CP0 registers.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Move comment containing summary of CP0 registers. Checkpatch
script reported some tabs in the resutling diff, so convert
these tabs to spaces too.
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
This reverts commit a33fbb4f8b.
The functionality is unused.
Note: in addition to automatic revert, drop second parameter in
hbitmap_iter_next() call from hbitmap_next_dirty_area() too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This reverts commit 269576848e.
The functionality is unused. Drop tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
This reverts commit 72d10a9421.
The function is unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Use bdrv_dirty_bitmap_next_dirty_area() instead of
bdrv_dirty_iter_next_area(), because of the following problems of
bdrv_dirty_iter_next_area():
1. Using HBitmap iterators we should carefully handle unaligned offset,
as first call to hbitmap_iter_next() may return a value less than
original offset (actually, it will be original offset rounded down to
bitmap granularity). This handling is not done in
do_sync_target_write().
2. bdrv_dirty_iter_next_area() handles unaligned max_offset
incorrectly:
look at the code:
if (max_offset == iter->bitmap->size) {
/* If max_offset points to the image end, round it up by the
* bitmap granularity */
gran_max_offset = ROUND_UP(max_offset, granularity);
} else {
gran_max_offset = max_offset;
}
ret = hbitmap_iter_next(&iter->hbi, false);
if (ret < 0 || ret + granularity > gran_max_offset) {
return false;
}
and assume that max_offset != iter->bitmap->size but still unaligned.
if 0 < ret < max_offset we found dirty area, but the function can
return false in this case (if ret + granularity > max_offset).
3. bdrv_dirty_iter_next_area() uses inefficient loop to find the end of
the dirty area. Let's use more efficient hbitmap_next_zero instead
(bdrv_dirty_bitmap_next_dirty_area() do so)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The function alters bdrv_dirty_iter_next_area(), which is wrong and
less efficient (see further commit
"block/mirror: fix and improve do_sync_target_write" for description).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJcPLU5AAoJEKeha0olJ0Nqt4AH/2JXm2Ky9lth8QdVzPodh0cl
xeBteQ51LVjneAlQuT5u5LR6+0ujljVCDUPaUfAcxhWJagofzPVIdSe+kOnQEtgN
e7zf1pFxvLkITTl2iu0/HFxBz1pJb+ZayZqZ5zOHfj7LVSafwNC7MbW/t5yueiXl
fPbxZqF4+C7lN9woS4p6zgB5berQuWHdHxsLLbkxFigr9JRiH3t8qm1tsa0nd/AZ
uCyVAzqxFBkchh86uZ8TisUU7XqR+ab99/feOEkMWj2ctra7HfkJeCkPOZialzOS
5A4UBZSDzCwr10NtHBMQhvSmvBFghm4L3u9faejg81TTTpbIQtcUoXu+ClGIHVM=
=cYBw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-14' into staging
nbd patches for 2019-01-14
Promote bitmap/NBD interfaces to stable for use in incremental
backups. Add 'qemu-nbd --bitmap'.
- John Snow: 0/11 bitmaps: remove x- prefix from QMP api
- Philippe Mathieu-Daudé: qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
- Eric Blake: 0/8 Promote x-nbd-server-add-bitmap to stable
# gpg: Signature made Mon 14 Jan 2019 16:13:45 GMT
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-01-14:
qemu-nbd: Add --bitmap=NAME option
nbd: Merge nbd_export_bitmap into nbd_export_new
nbd: Remove x-nbd-server-add-bitmap
nbd: Allow bitmap export during QMP nbd-server-add
nbd: Merge nbd_export_set_name into nbd_export_new
nbd: Only require disabled bitmap for read-only exports
nbd: Forbid nbd-server-stop when server is not running
nbd: Add some error case testing to iotests 223
qemu-nbd: Rename 'exp' variable clashing with math::exp() symbol
iotests: add iotest 236 for testing bitmap merge
iotests: implement pretty-print for log and qmp_log
iotests: change qmp_log filters to expect QMP objects only
iotests: remove default filters from qmp_log
iotests: add qmp recursive sorting function
iotests: add filter_generated_node_ids
iotests.py: don't abort if IMGKEYSECRET is undefined
block: remove 'x' prefix from experimental bitmap APIs
blockdev: n-ary bitmap merge
block/dirty-bitmap: remove assertion from restore
blockdev: abort transactions in reverse order
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While emulating identification protocol, tcp_emu() does not check
available space in the 'sc_rcv->sb_data' buffer. It could lead to
heap buffer overflow issue. Add check to avoid it.
Reported-by: Kira <864786842@qq.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
to get them out of the hot path.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Make slirp use GLib logging, instead of fprintf(), so that
applications can filter log, process it etc.
With recent versions of glib, G_MESSAGES_DEBUG must be set to "all" or
"Slirp" to see slirp debug messages.
Reformat DEBUG_MISC & DEBUG_ERROR calls to not need \n ending.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
We are moving to g_log() facilities to log errors and probably debug
messages too. Let's have the "Slirp" prefix on messages slirp produces.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This will allow to have cflags for the whole slirp.mo -objs.
It makes it possible to build tests that links only with
slirp-obj-y (and not the whole common-obj).
It is also a step towards building slirp as a shared library, although
this requires a bit more thoughts to build with
net/slirp.o (CONFIG_SLIRP would need to be 'm') and other build issues.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlw8o9cACgkQ+9DbCVqe
KkSmMQf/TRnnbaf/SIrYpAA6yGcAJtEnAU8f/CH3idAkEPv3+UtTkdSHor1u3A2G
BJaplFhYTOL/BwjUl1sctGYa8jVR6e1SS2rLRtIG7d+DyvmpFJNx9gKEdSkAuwbk
BVNElqFfKCezQeM9IrjhzXd7InoW7PNQMrKRrMvuECddLc0Ds9CTvOSY1WUpOlDh
rTEjvVhPu8LdZkhie/0D+zAzv8++iUDdImd1w7m3ilVPtyMflhdtaQ1Qpv6M/ldW
cmbIIiGq2xsC126Piyq2gguCNV8nt/a8vGavkCCIXNZ07eWVRxoMuGzlvVBhX9qV
oll92Fs9R8ZBROz5qpt/Uqt1+rBjNg==
=XPd+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-140119-1' into staging
A bunch of fixes for testing:
- Various Travis updates
- "stable" SID snapshot for docker
- avoid :latest docker tags
- g_usleep fix for some tests
# gpg: Signature made Mon 14 Jan 2019 14:59:35 GMT
# gpg: using RSA key FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-140119-1: (21 commits)
Revert "tests: Disable qht-bench parallel test when using gprof"
tests: use g_usleep instead of rem = sleep(time)
tests/docker: remove SID_AGE test hack
tests/docker: update our Travis image
travis: bump to Xenial baseline
docker: Use a stable snapshot for Debian Sid
travis: remove matrix settings that duplicate global settings
travis: run tests in verbose mode
travis: stop using container based envs
travis: stop redefining the script commands
travis: use homebrew addon for MacOSX
travis: don't clone git submodules upfront
travis: standardize the syntax used for env variables
travis: define all the build matrix entries in one place
travis: add whitespace between each major section & matrix entry
tests: use in-place sed magic for enabling deb-src in travis image
tests: update Fedora i386 cross image to Fedora 29
tests: update Fedora dockerfile to use Fedora 29
tests: remove obsolete 'debian' dockerfile
tests: run ldconfig after installing extra software
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
(Borislav Petkov)
* host-phys-bits-limit option for better control of 5-level EPT
(Eduardo Habkost)
* Disable MPX support on named CPU models (Paolo Bonzini)
* expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
as feature words (Vitaly Kuznetsov)
-----BEGIN PGP SIGNATURE-----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=S08V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue, 2019-01-14
* Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
(Borislav Petkov)
* host-phys-bits-limit option for better control of 5-level EPT
(Eduardo Habkost)
* Disable MPX support on named CPU models (Paolo Bonzini)
* expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX
as feature words (Vitaly Kuznetsov)
# gpg: Signature made Mon 14 Jan 2019 14:33:55 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386/kvm: add a comment explaining why .feat_names are commented out for Hyper-V feature bits
x86: host-phys-bits-limit option
target/i386: Disable MPX support on named CPU models
target-i386: Reenable RDTSCP support on Opteron_G[345] CPU models CPU models
i386/kvm: expose HV_CPUID_ENLIGHTMENT_INFO.EAX and HV_CPUID_NESTED_FEATURES.EAX as feature words
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having to fire up qemu, then use QMP commands for nbd-server-start
and nbd-server-add, just to expose a persistent dirty bitmap, is
rather tedious. Make it possible to expose a dirty bitmap using
just qemu-nbd (of course, for now this only works when qemu-nbd is
visiting a BDS formatted as qcow2).
Of course, any good feature also needs unit testing, so expand
iotest 223 to cover it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-9-eblake@redhat.com>
We only have one caller that wants to export a bitmap name,
which it does right after creation of the export. But there is
still a brief window of time where an NBD client could see the
export but not the dirty bitmap, which a robust client would
have to interpret as meaning the entire image should be treated
as dirty. Better is to eliminate the window entirely, by
inlining nbd_export_bitmap() into nbd_export_new(), and refusing
to create the bitmap in the first place if the requested bitmap
can't be located.
We also no longer need logic for setting a different bitmap
name compared to the bitmap being exported.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-8-eblake@redhat.com>
Now that nbd-server-add can do the same functionality (well, other
than making the exported bitmap name different than the underlying
bitamp - but we argued that was not essential, since it is just as
easy to create a new non-persistent bitmap with the desired name),
we no longer need the experimental separate command.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-7-eblake@redhat.com>
With the experimental x-nbd-server-add-bitmap command, there was
a window of time where an NBD client could see the export but not
the associated dirty bitmap, which can cause a client that planned
on using the dirty bitmap to be forced to treat the entire image
as dirty as a safety fallback. Furthermore, if the QMP client
successfully exports a disk but then fails to add the bitmap, it
has to take on the burden of removing the export. Since we don't
allow changing the exposed dirty bitmap (whether to a different
bitmap, or removing advertisement of the bitmap), it is nicer to
make the bitmap tied to the export at the time the export is
created, with automatic failure to export if the bitmap is not
available.
The experimental command included an optional 'bitmap-export-name'
field for remapping the name exposed over NBD to be different from
the bitmap name stored on disk. However, my libvirt demo code
for implementing differential backups on top of persistent bitmaps
did not need to take advantage of that feature (it is instead
possible to create a new temporary bitmap with the desired name,
use block-dirty-bitmap-merge to merge one or more persistent
bitmaps into the temporary, then associate the temporary with the
NBD export, if control is needed over the exported bitmap name).
Hence, I'm not copying that part of the experiment over to the
stable addition. For more details on the libvirt demo, see
https://www.redhat.com/archives/libvir-list/2018-October/msg01254.html,
https://kvmforum2018.sched.com/event/FzuB/facilitating-incremental-backup-eric-blake-red-hat
This patch focuses on the user interface, and reduces (but does
not completely eliminate) the window where an NBD client can see
the export but not the dirty bitmap, with less work to clean up
after errors. Later patches will add further cleanups now that
this interface is declared stable via a single QMP command,
including removing the race window.
Update test 223 to use the new interface.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-6-eblake@redhat.com>
The existing NBD code had a weird split where nbd_export_new()
created an export but did not add it to the list of exported
names until a later nbd_export_set_name() came along and grabbed
a second reference on the object; later, the first call to
nbd_export_close() drops the second reference while removing
the export from the list. This is in part because the QAPI
NbdServerRemoveNode enum documents the possibility of adding a
mode where we could do a soft disconnect: preventing new clients,
but waiting for existing clients to gracefully quit, based on
the mode used when calling nbd_export_close().
But in spite of all that, note that we never change the name of
an NBD export while it is exposed, which means it is easier to
just inline the process of setting the name as part of creating
the export.
Inline the contents of nbd_export_set_name() and
nbd_export_set_description() into the two points in an export
lifecycle where they matter, then adjust both callers to pass
the name up front. Note that for creation, all callers pass a
non-NULL name, (passing NULL at creation was for old style
servers, but we removed support for that in commit 7f7dfe2a),
so we can add an assert and do things unconditionally; but for
cleanup, because of the dual nature of nbd_export_close(), we
still have to be careful to avoid use-after-free. Along the
way, add a comment reminding ourselves of the potential of
adding a middle mode disconnect.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190111194720.15671-5-eblake@redhat.com>
Our initial implementation of x-nbd-server-add-bitmap put
in a restriction because of incremental backups: in that
usage, we are exporting one qcow2 file (the temporary overlay
target of a blockdev-backup sync:none job) and a dirty bitmap
owned by a second qcow2 file (the source of the
blockdev-backup, which is the backing file of the temporary).
While both qcow2 files are still writable (the target in
order to capture copy-on-write of old contents, and the
source in order to track live guest writes in the meantime),
the NBD client expects to see constant data, including the
dirty bitmap. An enabled bitmap in the source would be
modified by guest writes, which is at odds with the NBD
export being a read-only constant view, hence the initial
code choice of enforcing a disabled bitmap (the intent is
that the exposed bitmap was disabled in the same transaction
that started the blockdev-backup job, although we don't want
to track enough state to actually enforce that).
However, consider the case of a bitmap contained in a read-only
node (including when the bitmap is found in a backing layer of
the active image). Because the node can't be modified, the
bitmap won't change due to writes, regardless of whether it is
still enabled. Forbidding the export unless the bitmap is
disabled is awkward, paritcularly since we can't change the
bitmap to be disabled (because the node is read-only).
Alternatively, consider the case of live storage migration,
where management directs the destination to create a writable
NBD server, then performs a drive-mirror from the source to
the target, prior to doing the rest of the live migration.
Since storage migration can be time-consuming, it may be wise
to let the destination include a dirty bitmap to track which
portions it has already received, where even if the migration
is interrupted and restarted, the source can query the
destination block status in order to potentially minimize
re-sending data that has not changed in the meantime on a
second attempt. Such code has not been written, and might not
be trivial (after all, a cluster being marked dirty in the
bitmap does not necessarily guarantee it has the desired
contents), but it makes sense that letting an active dirty
bitmap be exposed and changing alongside writes may prove
useful in the future.
Solve both issues by gating the restriction against a
disabled bitmap to only happen when the caller has requested
a read-only export, and where the BDS that owns the bitmap
(whether or not it is the BDS handed to nbd_export_new() or
from its backing chain) is still writable. We could drop
the check altogether (if management apps are prepared to
deal with a changing bitmap even on a read-only image), but
for now keeping a check for the read-only case still stands
a chance of preventing management errors.
Update iotest 223 to show the looser behavior by leaving
a bitmap enabled the whole run; note that we have to tear
down and re-export a node when handling an error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Since we already forbid other nbd-server commands when not
in the right state, it is unlikely that any caller was relying
on a second stop to behave as a silent no-op. Update iotest
223 to show the improved behavior.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Testing success paths is important, but it's also nice to highlight
expected failure handling, to show that we don't crash, and so that
upcoming tests that change behavior can demonstrate the resulting
effects on error paths.
Add the following errors:
Attempting to export without a running server
Attempting to start a second server
Attempting to export a bad node name
Attempting to export a name that is already exported
Attempting to export an enabled bitmap
Attempting to remove an already removed export
Attempting to quit server a second time
All of these properly complain except for a second server-stop,
which will be fixed next.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111194720.15671-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
The use of a variable named 'exp' prevents includes to import <math.h>.
Rename it to avoid:
qemu-nbd.c:64:19: error: ‘exp’ redeclared as different kind of symbol
static NBDExport *exp;
^~~
In file included from /usr/include/features.h:428,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from /usr/lib/gcc/x86_64-redhat-linux/8/include/stdint.h:9,
from /source/qemu/include/qemu/osdep.h:80,
from /source/qemu/qemu-nbd.c:19:
/usr/include/bits/mathcalls.h:95:1: note: previous declaration of ‘exp’ was here
__MATHCALL_VEC (exp,, (_Mdouble_ __x));
^~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190111163519.11457-1-philmd@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
New interface, new smoke test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181221093529.23855-12-jsnow@redhat.com>
[eblake: fix last-minute change to echo text]
Signed-off-by: Eric Blake <eblake@redhat.com>
If iotests have lines exceeding >998 characters long, git doesn't
want to send it plaintext to the list. We can solve this by allowing
the iotests to use pretty printed QMP output that we can match against
instead.
As a bonus, it's much nicer for human eyes too.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-11-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
As laid out in the previous commit's message:
```
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
```
Therefore:
Change qmp_log to treat filters as if they're always qmp object filters,
then change the logging call to rely on log()'s ability to serialize QMP
objects, so we're not duplicating that effort.
Add a qmp version of filter_testfiles and adjust the only caller using
it for qmp_log to use the qmp version.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20181221093529.23855-10-jsnow@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Several places in iotests deal with serializing objects into JSON
strings, but to add pretty-printing it seems desirable to localize
all of those cases.
log() seems like a good candidate for that centralized behavior.
log() can already serialize json objects, but when it does so,
it assumes filters=[] operates on QMP objects, not strings.
qmp_log currently operates by dumping outgoing and incoming QMP
objects into strings and filtering them assuming that filters=[]
are string filters.
To have qmp_log use log's serialization, qmp_log will need to
accept only qmp filters, not text filters.
However, only a single caller of qmp_log actually requires any
filters at all. I remove the default filter and add it explicitly
to the caller in preparation for refactoring qmp_log to use rich
filters instead.
test 206 is amended to name the filter explicitly and the default
is removed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-9-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Python before 3.6 does not sort dictionaries (including kwargs).
Therefore, printing QMP objects involves sorting the keys to have
a predictable ordering in the iotests output. This means that
iotests output will sometimes show arguments in an order not
specified by the test author.
Presently, we accomplish this by using json.dumps' sort_keys argument,
where we only serialize the arguments dictionary, but not the command.
However, if we want to pretty-print QMP objects being sent to the
QEMU process, we need to build the entire command before logging it.
Ordinarily, this would then involve "arguments" being sorted above
"execute", which would necessitate a rather ugly and harder-to-read
change to many iotests outputs.
To facilitate pretty-printing AND maintaining predictable output AND
having "arguments" sort after "execute", add a custom sort function
that takes a dictionary and recursively builds an OrderedDict that
maintains the specific key order we wish to see in iotests output.
The qmp_log function uses this to build a QMP object that keeps
"execute" above "arguments", but sorts all keys and keys in any
subdicts in "arguments" lexicographically to maintain consistent
iotests output, with no incompatible changes to any current test.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-8-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To mimic the common filter of the same name, but for the python tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-7-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Instead of using os.environ[], use .get with a default of empty string
to match the setup in check to allow us to import the iotests module
(for debugging, say) without needing a crafted environment just to
import the module.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-6-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'x' prefix was added because I was uncertain of the direction we'd
take for the libvirt API. With the general approach solidified, I feel
comfortable committing to this API for 4.0.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-5-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Especially outside of transactions, it is helpful to provide
all-or-nothing semantics for bitmap merges. This facilitates
the coalescing of multiple bitmaps into a single target for
the "checkpoint" interpretation when assembling bitmaps that
represent arbitrary points in time from component bitmaps.
This is an incompatible change from the preliminary version
of the API.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20181221093529.23855-4-jsnow@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>