Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Qemu reports translation fault on 1st level instead of 0th level in case of
AArch64 address translation if the translation table walk is disabled or
the address is in the gap between the two regions.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1457527503-25958-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Starting with the ARMv7 Virtualization Extensions, the A32 and T32
instruction sets provide instructions "MSR (banked)" and "MRS
(banked)" which can be used to access registers for a mode other
than the current one:
* R<m>_<mode>
* ELR_hyp
* SPSR_<mode>
Implement the missing instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1456762734-23939-1-git-send-email-peter.maydell@linaro.org
Commit cbc0326b6f caused SRS instructions executed from Secure
EL1 to trap to EL3 even if the specified mode was not monitor mode.
According to the ARMv8 Architecture reference manual [F6.1.203], ALL
of the following conditions need to be met for SRS to trap to EL3:
* It is executed at Secure PL1.
* The specified mode is monitor mode.
* EL3 is using AArch64.
Correct the condition governing the trap to EL3 to check the
specified mode.
Signed-off-by: Ralf-Philipp Weinmann <ralf+devel@comsecuris.com>
Message-id: 20160222224251.GA11654@beta.comsecuris.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked comment text to read 'specified mode'; edited
commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
System emulation only has a little-endian target; BE32 mode
is implemented by adjusting the low bits of the address
for every byte and halfword load and store. 64-bit accesses
flip the low and high words.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased against master (Jan 2016)
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since this is not a high-performance path, just use a helper to
flip the E bit and force a lookup in the hash table since the
flags have changed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a tbflags for endianness, set based upon the CPUs current
endianness. This in turn propagates through to the disas endianness
flag.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the dc->mo_endianness flag for AA64 and use it in all ldst ops.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a disas flag for setting the CPU data endianness. This allows
control of the endianness from the CPU state rather than hard-coding it
to TARGET_WORDS_BIGENDIAN.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Split off as new patch from original:
"target-arm: introduce tbflag for CPSR.E"
* Wrote commit message from scratch
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We'll need the DisasContext in the next patch to retrieve the
desired endianness, so pass it as a whole to gen_aa32_ld*/st*.
Unfortunately we cannot let those functions call get_mem_index,
because of user-mode load/store instructions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Fix long lines
]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement SCTLR.EE bit which controls data endianess for exceptions
and page table translations. SCTLR.EE is mirrored to the CPSR.E bit
on exception entry.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that CPSR.E is set correctly, prepare for when setend will be able
to change it; bswap data in and out of strex manually by comparing
SCTLR.B, CPSR.E and TARGET_WORDS_BIGENDIAN (we do not have the luxury
of using TCGMemOps).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ PC changes:
* Moved SCTLR/CPSR logic to arm_cpu_data_is_big_endian
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
endian with address manipulations on subword accesses (to give the
illusion of BE). But user-mode cannot tell the difference and is
already implemented as straight BE. So handle the difference in the
endianess query, where USER mode is BE and system is not.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a CPU data endianness test that is used to drive the
virtio_big_endian test.
Move this up to the header so it can be more generally used for endian
tests. The KVM specific cpu_syncronize_state call is left behind in the
virtio specific function.
Rename it arm_cpu-data_is_big_endian() to more accurately capture that
this is for data accesses only.
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
bswap_code is a CPU property of sorts ("is the iside endianness the
opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the
actual CPU state involved here which is SCTLR.B (set for BE32
binaries, clear for BE8).
Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code.
The next patches will make data fetches honor both SCTLR.B and
CPSR.E appropriately.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[PC changes:
* rebased on master (Jan 2016)
* s/TARGET_USER_ONLY/CONFIG_USER_ONLY
* Use bswap_code() for disas_set_info() instead of raw sctlr_b
]
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In helper.c the expression
(env->uncached_cpsr & CPSR_M) != CPSR_USER
is always true; the right hand side was supposed to be ARM_CPU_MODE_USR
(an error in commit cb01d391).
Since the incorrect expression was always true, this just meant that
commit cb01d391 had no effect.
However simply changing the RHS here would reveal a logic error: if
the mode is USR we wish to completely ignore the attempt to set the
mode bits, which means that we must clear the CPSR_M bits from mask
to avoid the uncached_cpsr bits being updated at the end of the
function.
Move the condition into the correct place in the code, fix its RHS
constant, and add a comment about the fact that we must be doing a
gdbstub write if we're in user mode.
Fixes: https://bugs.launchpad.net/qemu/+bug/1550503
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1456764438-30015-1-git-send-email-peter.maydell@linaro.org
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The v8 ARM ARM defines that unused spaces in the ID_AA64* system
register ranges are Reserved and must RAZ, rather than being UNDEF.
Implement this.
In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2,
and newer versions of the Linux kernel will attempt to read this,
which causes them not to boot up on versions of QEMU missing this fix.
Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6
is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in
the ARMCPU struct so CPUs can override it, though since none do
this too will just RAZ.
Cc: qemu-stable@nongnu.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not
having any underlying state. This fixes an issue with booting
KVM enabled kernels when EL2 is on.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1456490739-19343-1-git-send-email-edgar.iglesias@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the performance monitor register traps controlled
by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance
registers already have an access function to deal with the
user-enable bit, and the TPM checks can be added there. We
also need a new access function which only implements the
TPM checks for use by the few not-EL0-accessible registers
and by PMUSERENR_EL0 (which is always EL0-readable).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455892784-11328-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Fix two issues with our implementation of the SDCR:
* it is only present from ARMv8 onwards
* it does not contain several of the trap bits present in its 64-bit
counterpart the MDCR_EL3
Put the register description in the right place so that it does not
get enabled for ARMv7 and earlier, and give it a write function so that
we can mask out the bits which should not be allowed to have an effect
if EL3 is 32-bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455892784-11328-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
If HCR.TGE is 1 then mode changes via CPS and MSR from Monitor to
NonSecure PL1 modes are illegal mode changes. Implement this check
in bad_mode_switch().
(We don't currently implement HCR.TGE, but this is the only missing
check from the v8 ARM ARM G1.9.3 and so it's worth adding now; the
rest of the HCR.TGE checks can be added later as necessary.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-12-git-send-email-peter.maydell@linaro.org
Mode switches from Hyp to any other mode via the CPS and MRS
instructions are illegal mode switches (though obviously switching
via exception return is valid). Add this check to bad_mode_switch().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-11-git-send-email-peter.maydell@linaro.org
In v8, the illegal mode changes which are UNPREDICTABLE in v7 are
given architected behaviour:
* the mode field is unchanged
* PSTATE.IL is set (so any subsequent instructions will UNDEF)
* any other CPSR fields are written to as normal
This is pretty much the same behaviour we picked for our
UNPREDICTABLE handling, with the exception that for v8 we
need to set the IL bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-10-git-send-email-peter.maydell@linaro.org
In v8 trying to switch mode to Mon from Secure EL1 is an
illegal mode switch. (In v7 this is impossible as all secure
modes except User are at EL3.) We can handle this case by
making a switch to Mon valid only if the current EL is 3,
which then gives the correct answer whether EL3 is AArch32
or AArch64.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-9-git-send-email-peter.maydell@linaro.org
We don't actually support Hyp mode yet, but add the correct
checks for it to the bad_mode_switch() function for completeness.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-8-git-send-email-peter.maydell@linaro.org
QEMU doesn't implement the NSACR.RFR bit, which is a permitted
IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8.
Add a comment to bad_mode_switch() to note that this is why
FIQ is always a valid mode regardless of the CPU's Secure state.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-7-git-send-email-peter.maydell@linaro.org
The only case where we can attempt a cpsr_write() mode switch from
User is from the gdbstub; all other cases are handled in the
calling code (notably translate.c). Architecturally attempts to
alter the mode bits from user mode are simply ignored (and not
treated as a bad mode switch, which in v8 sets CPSR.IL). Make
mode switches from User ignored in cpsr_write() as well, for
consistency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-6-git-send-email-peter.maydell@linaro.org
Raw CPSR writes should skip the architectural checks for whether
we're allowed to set the A or F bits and should also not do
the switching of register banks if the mode changes. Handle
this inside cpsr_write(), which allows us to drop the "manually
set the mode bits to avoid the bank switch" code from all the
callsites which are using CPSRWriteRaw.
This fixes a bug in 32-bit KVM handling where we had forgotten
the "manually set the mode bits" part and could thus potentially
trash the register state if the mode from the last exit to userspace
differed from the mode on this exit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org
Add an argument to cpsr_write() to indicate what kind of CPSR
write is being requested, since the exact behaviour should
differ for the different cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
The rules for setting the CPSR on a 32-bit exception return are
subtly different from those for setting the CPSR via an instruction
like MSR or CPS. (In particular, in Hyp mode changing the mode bits
is not valid via MSR or CPS.) Split the exception-return case into
its own helper for setting CPSR, so we can eventually handle them
differently in the helper function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
The Linux kernel accesses this register early in its setup.
Signed-off-by: Christopher Covington <christopher.covington@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b30d536cb16ec57b4412172bb6dbc3f00d293e7d.1455060548.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Tested-by: Nathan Rossi <nathan@nathanrossi.com>
Message-id: da0563119a9f56fd5fbdc26e7ed19a8a8457c5b9.1455060548.git.alistair.francis@xilinx.com
[PMM: Use 0 for PMCEID0 values for A15 and A57 since our PMU
does not currently implement any events.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make get_r13_banked() raise an exception at runtime for the
corner case of SRS from System mode, so that we can UNDEF it;
this brings us in to line with the ARM ARM's set of permitted
CONSTRAINED UNPREDICTABLE choices.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The user-mode versions of get/set_r13_banked() exist just to assert
if they're ever called -- the translate time code should never
emit calls to them because SRS from user mode always UNDEF.
There's no code in the softmmu versions that can't compile in
CONFIG_USER_ONLY, and the assertion is not particularly useful,
so combine the two functions rather than having completely split
versions under ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Move bank_number()'s implementation into internals.h, so
it's available in the user-mode-only compile as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Move get/set_r13_banked() from helper.c to op_helper.c. This will
let us add exception-raising code to them, and also puts them
in the same file as get/set_user_reg(), which makes some conceptual
sense.
(The original reason for the helper.c/op_helper.c split was that
only op_helper.c had access to the CPU env pointer; this distinction
has not been true for a long time, though, and so the split is
now rather arbitrary.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The SRS instruction is:
* UNDEFINED in Hyp mode
* UNPREDICTABLE in User or System mode
* UNPREDICTABLE if the specified mode isn't accessible
* trapped to EL3 if EL3 is AArch64 and we are at Secure EL1
Clean up the code to handle all these cases cleanly, including
picking UNDEF as our choice of UNPREDICTABLE behaviour rather
blindly trusting the mode field passed in the instruction.
As part of this, move the check for IS_USER into gen_srs()
itself rather than having it done by the caller.
The exception is that we don't UNDEF for calls from System
mode, which need a runtime check. This will be dealt with in
the following commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP,
this should be reported with a syndrome register indicating an
FP access trap, not one indicating a system register access trap.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Implement the debug register traps controlled by MDCR_EL2.TDA
and MDCR_EL3.TDA.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Implement trapping of the "debug ROM" registers, which are controlled
by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Implement the traps to EL2 and EL3 controlled by the bits
MDCR_EL2.TDOSA MDCR_EL3.TDOSA. These can configurably trap
accesses to the "powerdown debug" registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
We weren't quite implementing the handling of SCR.SMD correctly.
The condition governing whether the SMD bit should apply only
for NS state is "is EL3 is AArch32", not "is the current EL AArch32".
Fix the condition, and clarify the comment both to reflect this and
to expand slightly on what's going on for the v7-no-Virtualization case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Correct some corner cases we were getting wrong for
CNTFRQ access rights:
* should UNDEF from 32-bit Secure EL1
* only writable from the highest implemented exception level,
which might not be EL1 now
To clarify the code, provide a new utility function
arm_highest_el() which returns the highest implemented
exception level.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
ARM stops before access to a location covered by watchpoint. Also, QEMU
watchpoint fire is not necessarily an architectural watchpoint match.
Unfortunately, that is hardly possible to ignore a fired watchpoint in
debug exception handler. So move watchpoint check from debug exception
handler to the dedicated watchpoint checking callback.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454256948-10485-3-git-send-email-serge.fdrv@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
All Thumb Neon and VFP instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org
All Thumb coprocessor instructions are 32 bits, so the IL
bit in the syndrome register should be set. Pass false to the
syn_* function's is_16bit argument rather than s->thumb
so we report the correct IL bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org
In syndrome register values, the IL bit indicates the instruction
length, and is 1 for 4-byte instructions and 0 for 2-byte
instructions. All A64 and A32 instructions are 4-byte, but
Thumb instructions may be either 2 or 4 bytes long. Unfortunately
we named the parameter to the syn_* functions for constructing
syndromes "is_thumb", which falsely implies that it should be
set for all Thumb instructions, rather than only the 16-bit ones.
Fix the functions to name the parameter 'is_16bit' instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454683067-16001-2-git-send-email-peter.maydell@linaro.org
Enable EL3 support for our Cortex-A53 and Cortex-A57 CPU models.
We have enough implemented now to be able to run real world code
at least to some extent (I can boot ARM Trusted Firmware to the
point where it pulls in OP-TEE and then falls over because it
doesn't have a UEFI image it can chain to).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-8-git-send-email-peter.maydell@linaro.org
Implement some corner cases of the behaviour of the NSACR
register on ARMv8:
* if EL3 is AArch64 then accessing the NSACR from Secure EL1
with AArch32 should trap to EL3
* if EL3 is not present or is AArch64 then reads from NS EL1 and
NS EL2 return constant 0xc00
It would in theory be possible to implement all these with
a single reginfo definition, but for clarity we use three
separate definitions for the three cases and install the
right one based on the CPU feature flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-7-git-send-email-peter.maydell@linaro.org
System registers might have access requirements which need to
be described via a CPAccessFn and which differ for reads and
writes. For this to be possible we need to pass the access
function a parameter to tell it whether the access being checked
is a read or a write.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org
The arm_generate_debug_exceptions() function as originally implemented
assumes no EL2 or EL3. Since we now have much more of an implementation
of those now, fix this assumption.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-5-git-send-email-peter.maydell@linaro.org
The registers MVBAR and SCR should have the behaviour of trapping to
EL3 if accessed from Secure EL1, but we were incorrectly implementing
them to UNDEF (which would trap to EL1). Fix this by using the new
access_trap_aa32s_el1() access function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-4-git-send-email-peter.maydell@linaro.org
Implement the MDCR_EL3 register (which is SDCR for AArch32).
For the moment we implement it as reads-as-written.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1454506721-11843-3-git-send-email-peter.maydell@linaro.org
Fix a typo where "EL2" was written but "EL3" intended.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454506721-11843-2-git-send-email-peter.maydell@linaro.org
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
We already modify the processor feature bits to not report EL3
support to the guest if EL3 isn't enabled for the CPU we're emulating.
Add similar support for not reporting EL2 unless it is enabled.
This is necessary because real world guest code running at EL3
(trusted firmware or bootloaders) will query the ID registers to
determine whether it should start a guest Linux kernel in EL2 or EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1454437242-10262-1-git-send-email-peter.maydell@linaro.org
Implement the inputsize > pamax check for Stage 2 translations.
This is CONSTRAINED UNPREDICTABLE and we choose to fault.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename check_s2_startlevel to check_s2_mmu_setup in preparation
for additional checks.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1453932970-14576-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The S2 starting level table size check applies to both AArch32
and AArch64. Move it to common code.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1453932970-14576-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 system registers DACR32_EL2, IFSR32_EL2, SPSR_IRQ,
SPSR_ABT, SPSR_UND and SPSR_FIQ are visible and fully functional from
EL3 even if the CPU has no EL2 (unlike some others which are RES0
from EL3 in that configuration). Move them from el2_cp_reginfo[] to
v8_cp_reginfo[] so they are always present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1453227802-9991-1-git-send-email-peter.maydell@linaro.org
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
This patch provides the name of the architecture in the target.xml
if available.
This allows the remote gdb to detect the target architecture on its
own - so there is no need to specify it manually (e.g. if gdb is
started without a binary) using "set arch *arch_name*".
The name of the architecture is provided by a callback that can
be implemented by all architectures. The arm implementation has
special handling for iwmmxt and returns arm otherwise. This can
be extended if necessary.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[rework to use a callback]
Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The AArch64 FPEXC32_EL2 system register is visible at EL2 and EL3,
and allows those exception levels to read and write the FPEXC
register for a lower exception level that is using AArch32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1453132414-8127-1-git-send-email-peter.maydell@linaro.org
The architecture requires that for an exception return to AArch32 the
low bits of ELR_ELx are ignored when the PC is set from them:
* if returning to Thumb mode, ignore ELR_ELx[0]
* if returning to ARM mode, ignore ELR_ELx[1:0]
We were only squashing bit 0; also squash bit 1 if the SPSR T bit
indicates this is a return to ARM code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
We already implement almost all the checks for the illegal
return events from AArch64 state described in the ARM ARM section
D1.11.2. Add the two missing ones:
* return to EL2 when EL3 is implemented and SCR_EL3.NS is 0
* return to Non-secure EL1 when EL2 is implemented and HCR_EL2.TGE is 1
(We don't implement external debug, so the case of "debug state exit
from EL0 using AArch64 state to EL0 using AArch32 state" doesn't apply
for QEMU.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Remove the assumptions that the AArch64 exception return code was
making about a return to AArch32 always being a return to EL0.
This includes pulling out the illegal-SPSR checks so we can apply
them for return to 32 bit as well as return to 64-bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The entry offset when taking an exception to AArch64 from a lower
exception level may be 0x400 or 0x600. 0x400 is used if the
implemented exception level immediately lower than the target level
is using AArch64, and 0x600 if it is using AArch32. We were
incorrectly implementing this as checking the exception level
that the exception was taken from. (The two can be different if
for example we take an exception from EL0 to AArch64 EL3; we should
in this case be checking EL2 if EL2 is implemented, and EL1 if
EL2 is not implemented.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Handling of semihosting calls should depend on the register width
of the calling code, not on that of any higher exception level,
so we need to identify and handle semihosting calls before we
decide whether to deliver the exception as an entry to AArch32
or AArch64. (EXCP_SEMIHOST is also an "internal exception" so
it has no target exception level in the first place.)
This will allow AArch32 EL1 code to use semihosting calls when
running under an AArch64 EL3.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If EL2 or EL3 is present on an AArch64 CPU, then exceptions can be
taken to an exception level which is running AArch32 (if only EL0
and EL1 are present then EL1 must be AArch64 and all exceptions are
taken to AArch64). To support this we need to have a single
implementation of the CPU do_interrupt() method which can handle both
32 and 64 bit exception entry.
Pull the common parts of aarch64_cpu_do_interrupt() and
arm_cpu_do_interrupt() out into a new function which calls
either the AArch32 or AArch64 specific entry code once it has
worked out which one is needed.
We temporarily special-case the handling of EXCP_SEMIHOST to
avoid an assertion in arm_el_is_aa64(); the next patch will
pull all the semihosting handling out to the arm_cpu_do_interrupt()
level (since semihosting semantics depend on the register width
of the calling code, not on that of any higher EL).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move the aarch64_cpu_do_interrupt() function to helper.c. We want
to be able to call this from code that isn't AArch64-only, and
the move allows us to avoid awkward #ifdeffery at the callsite.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Support EL2 and EL3 in arm_el_is_aa64() by implementing the
logic for checking the SCR_EL3 and HCR_EL2 register-width bits
as appropriate to determine the register width of lower exception
levels.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
If we have a secure address space, use it in page table walks:
when doing the physical accesses to read descriptors, make them
through the correct address space.
(The descriptor reads are the only direct physical accesses
made in target-arm/ for CPUs which might have TrustZone.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Implement cpu_get_phys_page_attrs_debug instead of cpu_get_phys_page_debug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Implement the asidx_from_attrs CPU method to return the
Secure or NonSecure address space as appropriate.
(The function is inline so we can use it directly in target-arm
code to be added in later patches.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add QOM property to the ARM CPU which boards can use to tell us what
memory region to use for secure accesses. Nonsecure accesses
go via the memory region specified with the base CPU class 'memory'
property.
By default, if no secure region is specified it is the same as the
nonsecure region, and if no nonsecure region is specified we will use
address_space_memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
gdb won't actually dump these with 'info all-registers' since
it first tries to confirm that it should by checking the VFP
hwcap in the .auxv note. Well, we don't generate an .auxv note.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-9-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1452542185-10914-7-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the support needed for creating prstatus elf notes. This
allows us to use QMP dump-guest-memory.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-id: 1452542185-10914-6-git-send-email-drjones@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: moved setting of cpu::write_elf64_note inside !CONFIG_USER_ONLY
ifdef to avoid compile failure for linux-user build]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
arm_regime_using_lpae_format checks whether the LPAE extension is used
for stage 1 translation regimes. MMU indexes not exclusively of a stage 1
regime won't work with this method.
In case of ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1, offset these values
by ARMMMUIdx_S1NSE0 to get the right index indicating a stage 1
translation regime.
Rename also the function to arm_s1_regime_using_lpae_format and update
the comments to reflect the change.
Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com>
Message-id: 1452854262-19550-1-git-send-email-a.rigo@virtualopensystems.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they
keep coming back. Tracked down with the Coccinelle semantic patch
from commit 312fd5f.
Cc: Fam Zheng <famz@redhat.com>
Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Changchun Ouyang <changchun.ouyang@intel.com>
Cc: zhanghailiang <zhang.zhanghailiang@huawei.com>
Cc: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Acked-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
This patch adds support for split IRQ chip mode. When
KVM_CAP_SPLIT_IRQCHIP is enabled:
1.) The PIC, PIT, and IOAPIC are implemented in userspace while
the LAPIC is implemented by KVM.
2.) The software IOAPIC delivers interrupts to the KVM LAPIC via
kvm_set_irq. Interrupt delivery is configured via the MSI routing
table, for which routes are reserved in target-i386/kvm.c then
configured in hw/intc/ioapic.c
3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI,
which is handled in target-i386/kvm.c and relayed to the software
IOAPIC via ioapic_eoi_broadcast.
Signed-off-by: Matt Gingell <gingell@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we can't find details for the debug exception in our debug state
then we can assume the exception is due to debugging inside the guest.
To inject the exception into the guest state we re-use the TCG exception
code (do_interrupt).
However while guest debugging is in effect we currently can't handle the
guest using single step as we will keep trapping to back to userspace.
GDB makes heavy use of single-step behind the scenes which effectively
means the guest's ability to debug itself is disabled while it is being
debugged.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-6-git-send-email-alex.bennee@linaro.org
[PMM: Fixed a few typos in comments and commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds basic support for HW assisted debug. The ioctl interface to
KVM allows us to pass an implementation defined number of break and
watch point registers. When KVM_GUESTDBG_USE_HW is specified these
debug registers will be installed in place on the world switch into the
guest.
The hardware is actually capable of more advanced matching but it is
unclear if this expressiveness is available via the gdbstub protocol.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds support for single-step. There isn't much to do on the QEMU
side as after we set-up the request for single step via the debug ioctl
it is all handled within the kernel.
The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the
common code. If the kernel doesn't support guest debug the ioctl will
simply error.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-4-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These don't involve messing around with debug registers, just setting
the breakpoint instruction in memory. GDB will not use this mechanism if
it can't access the memory to write the breakpoint.
All the kernel has to do is ensure the hypervisor traps the breakpoint
exceptions and returns to userspace.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org
[PMM: Fixed typo in comment]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As we haven't always had guest debug support we need to probe for it.
Additionally we don't do this in the start-up capability code so we
don't fall over on old kernels.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1449599553-24713-2-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch32 translation completion code for singlestep enabled/active
case was a way more confusing and too repetitive then it needs to be.
Probably that was the cause for a bug to be introduced into it at some
point. The bug was that SWI/HVC/SMC exception would be generated in
condition-failed instruction code path whereas it shouldn't.
This patch rewrites the code in a way similar to the non-singlestep
case.
In the condition-passed/unconditional instruction code path we need to:
- Write the condexec bits back to the CPU state
- Advance the singlestep state machine and generate a corresponding
exception in case of SWI/HVC/SMC
- Write the PC back to the CPU state if it hasn't already been written
and generate an appropriate singlestep exception otherwise
In the condition-failed instruction code path we need to:
- Set a TCG label to jump to it if the condition is failed
- Write the condexec bits back to the CPU state
- Write the PC back to the CPU state since it hasn't been written in
this case
- Generate an appropriate singlestep exception
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Qemu does not generally perform alignment checks. However, the ARM ARM
requires implementation of alignment exceptions for a number of cases
including LDREX, and Windows-on-ARM relies on this.
This change adds plumbing to enable alignment checks on loads using
MO_ALIGN, a do_unaligned_access hook to raise the exception (data
abort), and uses the new aligned loads in LDREX (for all but
single-byte loads).
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com
[PMM: set WnR bits in syndrome and FSR as appropriate]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The checks for the unallocated encodings in the ldst_excl group
(exclusives and load-acquire/store-release) were not correct. This
error meant that in turn we ended up with code attempting to handle
the non-existent case of "non-exclusive load-acquire/store-release
pair". Delete that broken and now unreachable code.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
In an LPAE format descriptor in ARMv8 the address field extends
up to bit 47, not just bit 39. Correct the masking so we don't
give incorrect results if the output address size is greater
than 40 bits, as it can be for AArch64.
(Note that we don't yet support the new-in-v8 Address Size fault which
should be generated if any translation table entry or TTBR contains
an address with non-zero bits above the most significant bit of the
maximum output address size.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1448029971-9875-1-git-send-email-peter.maydell@linaro.org
Architectural breakpoint check could raise an exceptions, thus condexec
bits should be updated before calling gen_helper_check_breakpoints().
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coprocessor access instructions are allowed inside IT block.
gen_helper_access_check_cp_reg() can raise an exceptions thus condexec
bits should be updated before.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PC should be updated in the CPU state before calling check_breakpoints()
helper. Otherwise, the helper would not see the correct PC in the CPU
state if it is not at the start of a TB.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>