Return error if the requested offset starts after the size of the log
being returned. Also, move the check for earlier in the function so
we're not doing unnecessary calculations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed- by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The code switches on the opcode to invoke a function specific to that
opcode. There's no point in consolidating back to a common function that
just switches on that same opcode without any actual common code.
Restore the opcode specific behavior without going back through another
level of switches.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If the user does not specify an nsid parameter on the nvme-ns device,
nvme_register_namespace will find the first free namespace id and assign
that.
This fix makes sure the assigned id is saved.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
There are two reasons for changing this:
1. The nvme device currently uses an internal Intel device id.
2. Since commits "nvme: fix write zeroes offset and count" and "nvme:
support multiple namespaces" the controller device no longer has
the quirks that the Linux kernel think it has.
As the quirks are applied based on pci vendor and device id, change
them to get rid of the quirks.
To keep backward compatibility, add a new 'use-intel-id' parameter to
the nvme device to force use of the Intel vendor and device id. This is
off by default but add a compat property to set this for 5.1 machines
and older. If a 5.1 machine is booted (or the use-intel-id parameter is
explicitly set to true), the Linux kernel will just apply these
unnecessary quirks:
1. NVME_QUIRK_IDENTIFY_CNS which says that the device does not support
anything else than values 0x0 and 0x1 for CNS (Identify Namespace
and Identify Namespace). With multiple namespace support, this just
means that the kernel will "scan" namespaces instead of using
"Active Namespace ID list" (CNS 0x2).
2. NVME_QUIRK_DISABLE_WRITE_ZEROES. The nvme device started out with a
broken Write Zeroes implementation which has since been fixed in
commit 9d6459d21a ("nvme: fix write zeroes offset and count").
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
The emulated nvme device (hw/block/nvme.c) is currently using an
internal Intel device id.
Prepare to change that by allocating a device id under the 1b36 (Red
Hat, Inc.) vendor id.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
This adds support for multiple namespaces by introducing a new 'nvme-ns'
device model. The nvme device creates a bus named from the device name
('id'). The nvme-ns devices then connect to this and registers
themselves with the nvme device.
This changes how an nvme device is created. Example with two namespaces:
-drive file=nvme0n1.img,if=none,id=disk1
-drive file=nvme0n2.img,if=none,id=disk2
-device nvme,serial=deadbeef,id=nvme0
-device nvme-ns,drive=disk1,bus=nvme0,nsid=1
-device nvme-ns,drive=disk2,bus=nvme0,nsid=2
The drive property is kept on the nvme device to keep the change
backward compatible, but the property is now optional. Specifying a
drive for the nvme device will always create the namespace with nsid 1.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Prepare to support inactive namespaces.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
This adds support for SGL descriptor type 0x1 (bit bucket descriptor).
See the NVM Express v1.3d specification, Section 4.4 ("Scatter Gather
List (SGL)").
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
For now, support the Data Block, Segment and Last Segment descriptor
types.
See NVM Express 1.3d, Section 4.4 ("Scatter Gather List (SGL)").
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Since the controller has only supported PRPs so far it has not been
required to check the ending address (addr + len - 1) of the CMB access
for validity since it has been guaranteed to be in range of the CMB.
This changes when the controller adds support for SGLs (next patch), so
add that check.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Make the default request status NVME_SUCCESS so only error status codes
have to be set.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
This pulls block layer aio submission/completion to common functions.
For completions, additionally map an AIO error to the Unrecovered Read
and Write Fault status codes.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add the symbolic command name to the pci_nvme_{io,admin}_cmd and
pci_nvme_rw trace events.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The raw NLB field is a 16 bit value, so use le16_to_cpu instead of
le32_to_cpu and cast to uint32_t before incrementing the value to not
wrap around.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Add the nvme_l2b helper and use it for converting NLB and SLBA to byte
counts and offsets.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Style fixes.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Handling DMA errors gracefully is required for the device to pass the
block/011 test ("disable PCI device while doing I/O") in the blktests
suite.
With this patch the device sets the Controller Fatal Status bit in the
CSTS register when failing to read from a submission queue or writing to
a completion queue; expecting the host to reset the controller.
If DMA errors occur at any other point in the execution of the command
(say, while mapping the PRPs), the command is aborted with a Data
Transfer Error status code.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Some devices might want to know the return value of dma_memory_rw, so
pass it along instead of ignoring it.
There are no existing users of the return value, so this patch should be
safe.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Keith Busch <kbusch@kernel.org>
Fix a typo in the sq doorbell trace event.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
-----BEGIN PGP SIGNATURE-----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=ZpMy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-26' into staging
* qtest fixes (e.g. memory leaks)
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
# gpg: Signature made Mon 26 Oct 2020 09:34:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-26: (31 commits)
tests/acceptance: Use .ppm extention for Portable PixMap files
tests/acceptance: Remove unused import
test/docker/dockerfiles: Add missing packages for acceptance tests
tests/acceptance: Enable AVOCADO_ALLOW_UNTRUSTED_CODE in the gitlab-CI
test/acceptance: Remove the CONTINUOUS_INTEGRATION tags
tests/acceptance/ppc_prep_40p: Fix the URL to the NetBSD-4.0 archive
scripts/oss-fuzz: ignore the generic-fuzz target
scripts/oss-fuzz: use hardlinks instead of copying
fuzz: register predefined generic-fuzz configs
fuzz: add generic-fuzz configs for oss-fuzz
fuzz: add an "opaque" to the FuzzTarget struct
fuzz: Add instructions for using generic-fuzz
scripts/oss-fuzz: Add crash trace minimization script
scripts/oss-fuzz: Add script to reorder a generic-fuzzer trace
fuzz: add a crossover function to generic-fuzzer
fuzz: add a DISABLE_PCI op to generic-fuzzer
fuzz: Add support for custom crossover functions
fuzz: Add fuzzer callbacks to DMA-read functions
fuzz: Declare DMA Read callback function
fuzz: Add DMA support to the generic-fuzzer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes:
- Improvements to logging output
- Hypervisor instruction fixups
- The ability to load a noMMU kernel
- SiFive OTP support
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+S8zUACgkQIeENKd+X
cFR79wf/UjQulwFofCgOh8Fsrh5tlbRVYSXEHCWkEg6V8yfA+WYkkup94wBJK0V6
tJglht7v8aovUFWRyEL+yB+zXmT88ZugW20D3NtP5aaTTuPWij2qlYDTJQK9FGEf
1rW5mFZ4VkULEEHeO6MoJ/0t50Cs4ViA//Qz6Un4Z+zVqYjkItT5NNYx9j+czLIJ
KBre/ziJXu8yIxYaxqy4Lb4IepVL5T9/pjIw5nbNbWE+DfnfqiUPVifXx73gFRPZ
zRfgDD+Dbn/bbmDl137PkpPa2hk5CNUAL8/9rEhnjji2Lrb6SH+gFc0GvnZk7DJm
duKXhegU/ATZlI+1bLqL1D1z8Do6qQ==
=H9Qu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201023' into staging
A collection of RISC-V fixes for the next QEMU release.
This includes:
- Improvements to logging output
- Hypervisor instruction fixups
- The ability to load a noMMU kernel
- SiFive OTP support
# gpg: Signature made Fri 23 Oct 2020 16:13:57 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201023:
hw/misc/sifive_u_otp: Add backend drive support
hw/misc/sifive_u_otp: Add write function and write-once protection
target/riscv: raise exception to HS-mode at get_physical_address
hw/riscv: Load the kernel after the firmware
hw/riscv: Add a riscv_is_32_bit() function
hw/riscv: Return the end address of the loaded firmware
hw/riscv: sifive_u: Allow specifying the CPU
target/riscv: Fix implementation of HLVX.WU instruction
target/riscv: Fix update of hstatus.GVA in riscv_cpu_do_interrupt
target/riscv: Fix update of hstatus.SPVP
hw/intc: Move sifive_plic.h to the include directory
riscv: Convert interrupt logs to use qemu_log_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the object's values from the class when the object is
created, no need to have vl.c do it for us.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up vl.c, default min/max/default_cpus to uniprocessor
directly in the QOM class initialization code.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With upstream commit#ea1edcd7da1a "vl: relocate paths to data
directories", the data dir logic was unified between POSIX &
Win32. That patch moved to using 'get_relocated_path()', to
find the data dir. There is a latent bug in get_relocated_path
which can cause it to spin indefinitely, when the bind dir is
the same as the passed in dir (in this case, it was the data
dir).
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08802BF242C429A15DDB32ACC01B0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With upstream commit#8a19980e3fc4, logic was introduced to only
allow WHPX build on x64. But, the logic checks for the cpu family
and not the cpu. On my fedora container build, the cpu family is
x86 and the cpu is x86_64. Fixing the build break by checking for
the cpu, instead of the cpu family.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880D706A85793DDFC411304C01D0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson has a localedir option, so passing the path through that option
is the cleanest way when we move directories out of config-host.mak.
In preparation for doing that without changing semantics and without
special-casing localedir code, add a configure option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefile.mtest depends
on build.ninja, but Make does not know when build.ninja needs to be
rebuilt before creating Makefile.mtest.
To fix this, separate the ninja invocation into the "regenerate build
files" phase and the QEMU build phase. Sentinel files such as
meson-private/coredata.dat or build.ninja are used to figure out the
phases that haven't run yet; however, because those files' timestamps
are not guaranteed to be touched, the usual makefile stamp-file trick
is used on top.
Reported-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HMP 'screendump' command generates Portable PixMap files.
Make it obvious by using the .ppm file extention.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201021105035.2477784-3-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201021105035.2477784-2-f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some of the "check-acceptance" tests are still skipped in the CI
since the docker images do not provide the necessary packages, e.g.
the netcat binary. Add them to get more test coverage.
Message-Id: <20201023073351.251332-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests are running in containers here, so it should be OK to
run with AVOCADO_ALLOW_UNTRUSTED_CODE enabled in this case.
Message-Id: <20201023073351.251332-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are not running the acceptance tests on Travis anymore, so these
checks can be removed now.
Message-Id: <20201023073351.251332-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current URL on cdn.netbsd.org is failing - using archive.netbsd.org
instead seems to be fine.
Message-Id: <20201023073351.251332-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
generic-fuzz is not a standalone fuzzer - it requires some env variables
to be set. On oss-fuzz, we set these with some predefined
generic-fuzz-{...} targets, that are thin wrappers around generic-fuzz.
Do not make a link for the generic-fuzz from the oss-fuzz build, so
oss-fuzz does not treat it as a standalone fuzzer.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-18-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
[thuth: Reformatted one comment to stay within the 80 columns limit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Prior to this, fuzzers in the output oss-fuzz directory were exactly
the same executable, with a different name to do argv[0]-based
fuzz-target selection. This is a waste of space, especially since these
binaries can weigh many MB.
Instead of copying, use hard links, to cut down on wasted space. We need
to place the primary copy of the executable into DEST_DIR, since this is
a separate file-system on oss-fuzz. We should not place it directly into
$DEST_DIR, since oss-fuzz will treat it as an independent fuzzer and try
to run it for fuzzing. Instead, we create a DEST_DIR/bin directory to
store the primary copy.
Suggested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-17-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We call get_generic_fuzz_configs, which fills an array with
predefined {name, args, objects} triples. For each of these, we add a
new FuzzTarget, that uses a small wrapper to set
QEMU_FUZZ_{ARGS,OBJECTS} to the corresponding predefined values.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-16-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Predefine some generic-fuzz configs. For each of these, we will create a
separate FuzzTarget that can be selected through argv0 and, therefore,
fuzzed on oss-fuzz.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-15-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It can be useful to register FuzzTargets that have nearly-identical
initialization handlers (e.g. for using the same fuzzing code, with
different configuration options). Add an opaque pointer to the
FuzzTarget struct, so that FuzzTargets can hold some data, useful for
storing target-specific configuration options, that can be read by the
get_init_cmdline function.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-14-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-13-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Once we find a crash, we can convert it into a QTest trace. Usually this
trace will contain many operations that are unneeded to reproduce the
crash. This script tries to minimize the crashing trace, by removing
operations and trimming QTest bufwrite(write addr len data...) commands.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-12-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic-fuzzer uses hooks to fulfill DMA requests just-in-time.
This means that if we try to use QTEST_LOG=1 to build a reproducer, the
DMA writes will be logged _after_ the in/out/read/write that triggered
the DMA read. To work work around this, the generic-fuzzer annotates
these just-in time DMA fulfilments with a tag that we can use to
discern them. This script simply iterates over a raw qtest
trace (including log messages, errors, timestamps etc), filters it and
re-orders it so that DMA fulfillments are placed directly _before_ the
qtest command that will cause the DMA access.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-11-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>