This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cea5f9a28f exposed bugs in unassigned memory
access handling. Fix them by always passing CPUState to the handlers.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Don't compile virtio.c in hwlib, it depends on memory accesses
performed in CPU endianness.
Make loads and stores in CPU endianness unavailable to devices
and poison them to avoid further bugs.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
UA2007 ASI_BLK_* should be added in is_translating_asi().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cppcheck reports an error:
qemu/tcg/mips/tcg-target.c:1487: error: Invalid number of character (()
The unpatched code won't compile on mips hosts starting with commit
cea5f9a28f.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The destination registers of SIMD signed compare instructions
(fcmp*<16|32>) are not FP registers but general purpose r registers.
Comparisons should be freg_rs1 CMP freg_rs2, that were reversed.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
target-arm: Minimal implementation of performance counters
Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Revert "target-arm: Use global env in neon_helper.c helpers"
target-arm: Pass fp status pointer explicitly to neon fp helpers
target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
target-arm: Add helper function to generate code to get fpstatus pointer
Revert "target-arm: Use global env in iwmmxt_helper.c helpers"
Conflicts:
Makefile.target
A host chardev could close just before the guest sends some data to be
written. This will cause an -EPIPE error. This shouldn't be propagated
to virtio-serial-bus.
Ideally we should close the port once -EPIPE is received, but since the
chardev interface doesn't return such meaningful values to its users,
all we get is -1 for any kind of error. Just return 0 for now and wait
for chardevs to return better error messages to act better on the return
messages.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
We were previously allowing arbitrarily-long indirect descriptors, which
could lead to a buffer overflow in qemu-kvm process.
CVE-2011-2212
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vhost dev stop failed to clear the log field.
Typically not an issue as dev start overwrites this field,
but if logging gets disabled before the following start,
it doesn't so this causes a double free.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new xen_console protocol changed the default xen_console output device
from whatever Qemu chose to whatever xenstore choses and "pty" as fallback.
This is not how Qemu works. It has its own serial redirection semantics. So
it xenstore doesn't contain information on what to do, Qemu is the place to
ask.
Signed-off-by: Alexander Graf <agraf@suse.de>
Since CS 21994 on xen-unstable.hg and CS
466608f3a32e1f9808acdf832a5843af37e5fcec on qemu-xen-unstable.git, few
changes have been introduced to the PV console xenstore protocol, as
described by the document docs/misc/console.txt under xen-unstable.hg.
From the Qemu point of view, very few modifications are needed to
correctly support the protocol: read from xenstore the "output" node
that tell us what the output of the PV console is going to be.
In case the output is a tty, write to xenstore the device name.
Changes in v2:
- fix error paths: free malloc'ed strings and close the xenstore
connection before returning;
- remove useless snprintf in xenstore_store_pv_console_info if i == 0.
Changes in v3:
- replace xs_daemon_open/xs_daemon_close with xs_open/xs_close.
Changes in v4:
- add a compatibility implementation of xs_open/xs_close.
Changes in v5:
- fix code style.
[agraf] fix build error due to missing stub
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
When having code like this:
static PCIDeviceInfo piix_ide_info[] = {
{
.qdev.name = "piix3-ide",
.qdev.size = sizeof(PCIIDEState),
.qdev.no_user = 1,
.no_hotplug = 1,
.init = pci_piix_ide_initfn,
.vendor_id = PCI_VENDOR_ID_INTEL,
.device_id = PCI_DEVICE_ID_INTEL_82371SB_1,
.class_id = PCI_CLASS_STORAGE_IDE,
},{
.qdev.name = "piix4-ide",
.qdev.size = sizeof(PCIIDEState),
.qdev.no_user = 1,
.no_hotplug = 1,
.init = pci_piix_ide_initfn,
.vendor_id = PCI_VENDOR_ID_INTEL,
.device_id = PCI_DEVICE_ID_INTEL_82371AB,
.class_id = PCI_CLASS_STORAGE_IDE,
},{
/* end of list */
}
};
checkpatch currently errors out, claiming that spaces need to follow
commas. However, this particular style of defining structs is pretty
common in qemu code and very readable. So let's declare it as supported
for the above case.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Sometimes the toolstack uses "aio" without an additional format
identifier, in such cases use "raw".
Updated in v2:
- fix code style.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
qemu_ram_ptr_length should take ram_addr_t as argument rather than
target_phys_addr_t because is doing comparisons with RAMBlock addresses.
cpu_physical_memory_map should create a ram_addr_t address to pass to
qemu_ram_ptr_length from PhysPageDesc phys_offset.
Remove code after abort() in qemu_ram_ptr_length.
Changes in v2:
- handle 0 size in qemu_ram_ptr_length;
- rename addr1 to raddr;
- initialize raddr to ULONG_MAX.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
When disk is a cdrom and the drive is empty the "params" node in
xenstore might be missing completely: cope with it instead of
segfaulting.
Updated in v2:
- actually removed the strchr(blkdev->params, ':') that caused the
segfault;
- free all the allocated strings from xenstore before returning;
Updated in v3:
- set blkdev fields to NULL after free'ing them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Register the vkbd backend even when running as device emulator for HVM
guests: it is useful because it doesn't need a frequent timer like usb.
Check whether the XenInput DisplayState has been set in the initialise
state, rather than the input state.
In case the DisplayState hasn't been set and there is no vfb for this
domain, then set the XenInput DisplayState to the default one.
Changed in v2:
- use qemu_free instead of free;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
con_init leaks the string "type", fix it.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Initialize the Xen console backend and the Xen disk backend even when
running in HVM mode so that PV on HVM drivers can connect to them.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Xen won't be enabled if there is no backend support available for the
host. And that also means the map cache will work. So drop the separate
config switch and move the required stubs over to xen-stub.c.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The map cache is a Xen thing, so its API should make this clear.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce CONFIG_XEN_BACKEND so that this new config solely controls the
target-independent backend build and CONFIG_XEN can focus on per-target
building.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Both the signal thread (via sigwait()) and the cpu thread (via
a normal signal handler) were attempting to catch SIG_IPI.
This resulted in random freezes under Darwin.
This patch separates SIG_IPI from the rest of the signals handled
by the signal thread, because it is independently caught by the cpu
thread.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Changes since v1:
- take pthread_sigmask() out of the ifdef as it is now common
to both parts.
This fix effectively blocks, in the main thread, the signals handled
by signalfd or the compatibility signal thread.
This way, such signals are received synchronously in the main thread
through sigfd_handler() instead of triggering the signal handler
directly, asynchronously.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Expand the note on the number of TCG ops generated per target insn,
to be clearer about the range of applicability of the 20 op rule
of thumb. Also add a note about the hard MAX_OP_PER_INSTR limit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Translation used incorrectly CPUState fields directly to check
for FPU enable state and 32 bit address masking on Sparc64.
Fix by using TB flags instead.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Support UA2007 block store ASIs for stfa instructions.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>