Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Both qdev_connect_gpio_out_named() and device_set_realized() put
objects without a parent into the "/machine/unattached/" orphanage.
qdev_connect_gpio_out_named() needs a lengthy comment to explain how
it works. It exploits that object_property_add_child() can fail only
when we got a parent already, and ignoring that error does what we
want. True. If it failed due to "duplicate property", we'd be in
trouble, but that would be a programming error.
device_set_realized() is cleaner: it checks whether we need a parent,
then calls object_property_add_child(), aborting on failure. No need
for a comment, and programming errors get caught.
Change qdev_connect_gpio_out_named() to match.
Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505152926.18877-14-armbru@redhat.com>
The "bcm2835-peripherals" device's .instance_init() method
bcm2835_peripherals_init() attempts to make two memory regions QOM
children of the device. This is futile, because memory_region_init()
already did. The errors are ignored (a later commit will change
that). Drop the useless calls.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200505152926.18877-13-armbru@redhat.com>
QOM object initialization runs .instance_init() for the type and all
its supertypes; see object_init_with_type().
Both TYPE_E1000_BASE and its concrete subtypes set .instance_init() to
e1000_instance_init(). For the concrete subtypes, it duly gets run
twice. The second run fails, but the error gets ignored (a later
commit will change that).
Remove it from the subtypes.
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-12-armbru@redhat.com>
isa_superio_realize() attempts to make isa-parallel and isa-serial QOM
children, but this does not work, because it calls
object_property_add_child() after realizing with qdev_init_nofail().
Realizing a device without a parent gives it one: it gets put into the
"/machine/unattached/" orphanage. The extra
object_property_add_child() fails, and isa_superio_realize() ignores
the error.
Move the object_property_add_child() before qdev_init_nofail(), and
pass &error_abort.
For the other components, isa_superio_realize() doesn't even try. Add
object_property_add_child() there.
This affects machines 40p, clipper and fulong2e.
For instance, fulong2e has its vt82c686b-superio (which is an
isa-superio) at /machine/unattached/device[9]. Before the patch, its
components are at /machine/unattached/device[10] .. [14]. Afterwards,
they are at
/machine/unattached/device[9]/{parallel0,serial0,serial1,isa-fdc,i8042}.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-11-armbru@redhat.com>
Both s390_features[S390_FEAT_PCC_CMAC_AES_256].name and
s390_features[S390_FEAT_PCC_CMAC_EAES_256].name is
"pcc-cmac-eaes-256". The former is obviously a pasto.
Impact:
* s390_feat_bitmap_to_ascii() misidentifies S390_FEAT_PCC_CMAC_AES_256
as "pcc-cmac-eaes-256". Affects QMP commands query-cpu-definitions,
query-cpu-model-expansion, query-cpu-model-baseline,
query-cpu-model-comparison, and the error message when
s390_realize_cpu_model() fails in check_compatibility().
* s390_cpu_list() also misidentifies it. Affects -cpu help.
* s390_cpu_model_register_props() creates CPU property
"pcc-cmac-eaes-256" twice. The second one fails, but the error is
ignored (a later commit will change that). Results in a single
property "pcc-cmac-eaes-256" with the description for
S390_FEAT_PCC_CMAC_AES_256, and no property for
S390_FEAT_PCC_CMAC_EAES_256. CPU properties are visible in CLI -cpu
and -device, QMP & HMP device_add, QMP device-list-properties, and
QOM introspection.
The two features are almost always used via their group msa4. Such
use is not affected by this bug.
Fix by deleting the wayward 'e'.
Fixes: 7824174462 ("s390x/cpumodel: introduce CPU features")
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20200505152926.18877-10-armbru@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[Lost paragraph in commit message restored, Fixes: tweaked]
The tests' "qemu-dummy" device has only class properties. Turn one of
them into an instance property. test_dummy_class_iterator() expects
one fewer property than test_dummy_iterator(). Rewrite
test_dummy_prop_iterator() to take expected properties as argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-9-armbru@redhat.com>
object_property_set_description() and
object_class_property_set_description() fail only when property @name
is not found.
There are 85 calls of object_property_set_description() and
object_class_property_set_description(). None of them can fail:
* 84 immediately follow the creation of the property.
* The one in spapr_rng_instance_init() refers to a property created in
spapr_rng_class_init(), from spapr_rng_properties[].
Every one of them still gets to decide what to pass for @errp.
51 calls pass &error_abort, 32 calls pass NULL, one receives the error
and propagates it to &error_abort, and one propagates it to
&error_fatal. I'm actually surprised none of them violates the Error
API.
What are we gaining by letting callers handle the "property not found"
error? Use when the property is not known to exist is simpler: you
don't have to guard the call with a check. We haven't found such a
use in 5+ years. Until we do, let's make life a bit simpler and drop
the @errp parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-8-armbru@redhat.com>
[One semantic rebase conflict resolved]
Some object_property_add_FOO() return the newly added property, some
don't. Clean that up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-7-armbru@redhat.com>
qom/object.c provides object_property_get_TYPE() and
object_property_set_TYPE() for a number of common types. These are
all convenience wrappers around object_property_get_qobject() and
object_property_set_qobject().
Except for object_property_get_uint16List(), which is unusual in two ways:
* It bypasses object_property_get_qobject(). Fixable; the previous
commit did it for object_property_get_enum())
* It stores the value through a parameter. Its contract claims it
returns the value, like the other functions do. Also fixable.
Fixing is not worthwhile, though: object_property_get_uint16List() has
seen exactly one user in six years.
Convert the lone user to do its job with the generic
object_property_get_qobject(), and drop object_property_get_uint16List().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505152926.18877-6-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Commit message typo fixed]
Reuse object_property_get_str(). Switches from the string to the
qobject visitor under the hood.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505152926.18877-5-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-4-armbru@redhat.com>
Uses of gchar * in qom/object.h:
* ObjectProperty member @name
Functions that take a property name argument all use char *. Change
the member to match.
* ObjectProperty member @type
Functions that take a property type argument or return it all use
char *. Change the member to match.
* ObjectProperty member @description
Functions that take a property description argument all use char *.
Change the member to match.
* object_resolve_path_component() parameter @part
Path components are property names. Most callers pass char *
arguments. Change the parameter to match. Adjust the few callers
that pass gchar * to pass char *.
* Return value of object_get_canonical_path_component(),
object_get_canonical_path()
Most callers convert their return values right back to char *.
Change the return value to match. Adjust the few callers where that
would add a conversion to gchar * to use char * instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-3-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-2-armbru@redhat.com>
Convert the Neon floating point VFMA and VFMS insn to decodetree.
These are the last insns in the 3-reg-same group so we can
remove all the support/loop code from the old decoder.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-18-peter.maydell@linaro.org
Convert the Neon fp VMAX/VMIN/VMAXNM/VMINNM/VRECPS/VRSQRTS 3-reg-same
insns to decodetree. (These are all the remaining non-accumulation
instructions in this group.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-17-peter.maydell@linaro.org
The usual location for the env argument in the argument list of a TCG helper
is immediately after the return-value argument. recps_f32 and rsqrts_f32
differ in that they put it at the end.
Move the env argument to its usual place; this will allow us to
more easily use these helper functions with the gvec APIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-16-peter.maydell@linaro.org
Convert the Neon integer 3-reg-same compare insns VCGE, VCGT,
VCEQ, VACGE and VACGT to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-15-peter.maydell@linaro.org
Convert the Neon integer VMUL, VMLA, and VMLS 3-reg-same inssn to
decodetree.
We don't have a gvec helper for multiply-accumulate, so VMLA and VMLS
need a loop function do_3same_fp(). This takes a reads_vd parameter
to do_3same_fp() which tells it to load the old value into vd before
calling the callback function, in the same way that the do_vfp_3op_sp()
and do_vfp_3op_dp() functions in translate-vfp.inc.c work. (The
only uses in this patch pass reads_vd == true, but later commits
will use reads_vd == false.)
This conversion fixes in passing an underdecoding for VMUL
(originally reported by Fredrik Strupe <fredrik@strupe.net>): bit 1
of the 'size' field must be 0. The old decoder didn't enforce this,
but the decodetree pattern does.
The gen_VMLA_fp_reg() function performs the addition operation
with the operands in the opposite order to the old decoder:
since Neon sets 'default NaN mode' float32_add operations are
commutative so there is no behaviour difference, but putting
them this way around matches the Arm ARM pseudocode and the
required operation order for the subtraction in gen_VMLS_fp_reg().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-14-peter.maydell@linaro.org
Convert the Neon float VPMIN, VPMAX and VPADD 3-reg-same insns to
decodetree. These are the only remaining 'pairwise' operations,
so we can delete the pairwise-specific bits of the old decoder's
for-each-element loop now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-13-peter.maydell@linaro.org
Convert the Neon VADD, VSUB, VABD 3-reg-same insns to decodetree.
We already have gvec helpers for addition and subtraction, but must
add one for fabd.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-12-peter.maydell@linaro.org
Convert the Neon VQDMULH and VQRDMULH 3-reg-same insns to
decodetree. These are the last integer operations in the
3-reg-same group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-11-peter.maydell@linaro.org
Convert the Neon integer VPADD 3-reg-same insns to decodetree. These
are 'pairwise' operations. (Note that VQRDMLAH, which shares the
same primary opcode but has U=1, has already been converted.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-10-peter.maydell@linaro.org
Convert the Neon integer VPMAX and VPMIN 3-reg-same insns to
decodetree. These are 'pairwise' operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-9-peter.maydell@linaro.org
Convert the VQSHL, VRSHL and VQRSHL insns in the 3-reg-same
group to decodetree. We have already implemented the size==0b11
case of these insns; this commit handles the remaining sizes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-8-peter.maydell@linaro.org
Convert the Neon VRHADD and VHSUB 3-reg-same insns to decodetree.
(These are all the other insns in 3-reg-same which were using
GEN_NEON_INTEGER_OP() and which are not pairwise or
reversed-operands.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-7-peter.maydell@linaro.org
Convert the Neon VABA and VABD insns in the 3-reg-same group to
decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-6-peter.maydell@linaro.org
Convert the Neon VHADD insns in the 3-reg-same group to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-5-peter.maydell@linaro.org
Convert the 64-bit element insns in the 3-reg-same group
to decodetree. This covers VQSHL, VRSHL and VQRSHL where
size==0b11.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-4-peter.maydell@linaro.org
Convert the Neon SHA instructions in the 3-reg-same group
to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-3-peter.maydell@linaro.org
Convert the Neon VQRDMLAH and VQRDMLSH insns in the 3-reg-same group
to decodetree. These don't use do_3same() because they want to
operate on VFP double registers, whose offsets are different from the
neon_reg_offset() calculations do_3same does.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200512163904.10918-2-peter.maydell@linaro.org
I and Xiang are willing to review the APEI-related patches and
volunteer as the reviewers for the HEST/GHES part.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-11-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a SIGBUS signal handler. In this handler, it checks the SIGBUS type,
translates the host VA delivered by host to guest PA, then fills this PA
to guest APEI GHES memory, then notifies guest according to the SIGBUS
type.
When guest accesses the poisoned memory, it will generate a Synchronous
External Abort(SEA). Then host kernel gets an APEI notification and calls
memory_failure() to unmapped the affected page in stage 2, finally
returns to guest.
Guest continues to access the PG_hwpoison page, it will trap to KVM as
stage2 fault, then a SIGBUS_MCEERR_AR synchronous signal is delivered to
Qemu, Qemu records this error address into guest APEI GHES memory and
notifes guest using Synchronous-External-Abort(SEA).
In order to inject a vSEA, we introduce the kvm_inject_arm_sea() function
in which we can setup the type of exception and the syndrome information.
When switching to guest, the target vcpu will jump to the synchronous
external abort vector table entry.
The ESR_ELx.DFSC is set to synchronous external abort(0x10), and the
ESR_ELx.FnV is set to not valid(0x1), which will tell guest that FAR is
not valid and hold an UNKNOWN value. These values will be set to KVM
register structures through KVM_SET_ONE_REG IOCTL.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-10-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_arch_on_sigbus_vcpu() error injection uses source_id as
index in etc/hardware_errors to find out Error Status Data
Block entry corresponding to error source. So supported source_id
values should be assigned here and not be changed afterwards to
make sure that guest will write error into expected Error Status
Data Block.
Before QEMU writes a new error to ACPI table, it will check whether
previous error has been acknowledged. If not acknowledged, the new
errors will be ignored and not be recorded. For the errors section
type, QEMU simulate it to memory section error.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-9-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
kvm_hwpoison_page_add() and kvm_unpoison_all() will both
be used by X86 and ARM platforms, so moving them into
"accel/kvm/kvm-all.c" to avoid duplicate code.
For architectures that don't use the poison-list functionality
the reset handler will harmlessly do nothing, so let's register
the kvm_unpoison_all() function in the generic kvm_init() function.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Message-id: 20200512030609.19593-8-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Record the GHEB address via fw_cfg file, when recording
a error to CPER, it will use this address to find out
Generic Error Data Entries and write the error.
In order to avoid migration failure, make hardware
error table address to a part of GED device instead
of global variable, then this address will be migrated
to target QEMU.
Acked-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-7-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds Hardware Error Source Table(HEST) via fw_cfg blobs.
Now it only supports ARMv8 SEA, a type of Generic Hardware Error
Source version 2(GHESv2) error source. Afterwards, we can extend
the supported types if needed. For the CPER section, currently it
is memory section because kernel mainly wants userspace to handle
the memory errors.
This patch follows the spec ACPI 6.2 to build the Hardware Error
Source table. For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
build_ghes_hw_error_notification() helper will help to add Hardware
Error Notification to ACPI tables without using packed C structures
and avoid endianness issues as API doesn't need explicit conversion.
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-6-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch builds error_block_address and read_ack_register fields
in hardware errors table , the error_block_address points to Generic
Error Status Block(GESB) via bios_linker. The max size for one GESB
is 1kb, For more detailed information, please refer to
document: docs/specs/acpi_hest_ghes.rst
Now we only support one Error source, if necessary, we can extend to
support more.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200512030609.19593-5-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RAS Virtualization feature is not supported now, so
add a RAS machine option and disable it by default.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Signed-off-by: Xiang Zheng <zhengxiang9@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20200512030609.19593-3-gengdongjiu@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The little end UUID is used in many places, so make
NVDIMM_UUID_LE to a common macro to convert the UUID
to a little end array.
Reviewed-by: Xiang Zheng <zhengxiang9@huawei.com>
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Message-id: 20200512030609.19593-2-gengdongjiu@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sonora Pass is a 2 socket x86 motherboard designed by Facebook
and supported by OpenBMC. Strapping configuration was obtained
from hardware and i2c configuration is based on dts found at:
1633c87b8b/arch/arm/boot/dts/aspeed-bmc-facebook-sonorapass.dts
Booted a test image of http://github.com/facebook/openbmc to login
prompt.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Amithash Prasad <amithash@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[PMM: fixed block comment style nit]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Include 64-bit element size in preparation for SVE2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Must clear the tail for AdvSIMD when SVE is enabled.
Fixes: ca40a6e6e3
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass a pointer directly to env->vfp.qc[0], rather than env.
This will allow SVE2, which does not modify QC, to pass a
pointer to dummy storage.
Change the return type of inl_qrdml.h_s16 to match the
sense of the operation: signed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200513163245.17915-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
