If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the VIRTIO 1.0 virtio-pci interface. The main change here is
that the register layout is no longer a fixed layout in BAR 0. Instead
we have to iterate of PCI Capabilities to find descriptions of where
various registers are located. The vring registers are also more
fine-grained, allowing for more flexible vring layouts, but we don't
take advantage of that.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-Id: <20191023100425.12168-17-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
The QAPI code generator clocks in at some 3100 SLOC in 8 source files.
Almost 60% of the code is in qapi/common.py. Split it into more
focused modules:
* Move QAPISchemaPragma and QAPISourceInfo to qapi/source.py.
* Move QAPIError and its sub-classes to qapi/error.py.
* Move QAPISchemaParser and QAPIDoc to parser.py. Use the opportunity
to put QAPISchemaParser first.
* Move check_expr() & friends to qapi/expr.py. Use the opportunity to
put the code into a more sensible order.
* Move QAPISchema & friends to qapi/schema.py
* Move QAPIGen and its sub-classes, ifcontext,
QAPISchemaModularCVisitor, and QAPISchemaModularCVisitor to qapi/gen.py
* Delete camel_case(), it's unused since commit e98859a9b9 "qapi:
Clean up after recent conversions to QAPISchemaVisitor"
A number of helper functions remain in qapi/common.py. I considered
moving the code generator helpers to qapi/gen.py, but decided not to.
Perhaps we should rewrite them as methods of QAPIGen some day.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-7-armbru@redhat.com>
[Add "# -*- coding: utf-8 -*-" lines]
"make check-qapi-schema" takes around 10s user + system time for me.
With -j, it takes a bit over 3s real time. We have worse tests. It's
still annoying when you work on the QAPI generator.
Some 1.4s user + system time is consumed by make figuring out what to
do, measured by making a target that does nothing. There's nothing I
can do about that right now. But let's see what we can do about the
other 8s.
Almost 7s are spent running test-qapi.py for every test case, the rest
normalizing and diffing test-qapi.py output. We have 190 test cases.
If I downgrade to python2, it's 4.5s, but python2 is a goner.
Hacking up test-qapi.py to exit(0) without doing anything makes it
only marginally faster. The problem is Python startup overhead.
Our configure puts -B into $(PYTHON). Running without -B is faster:
4.4s.
We could improve the Makefile to run test cases only when the test
case or the generator changed. But I'm after improvement in the case
where the generator changed.
test-qapi.py is designed to be the simplest possible building block
for a shell script to do the complete job (it's actually a Makefile,
not a shell script; no real difference). Python is just not meant for
that. It's for bigger blocks.
Move the post-processing and diffing into test-qapi.py, and make it
capable of testing multiple schema files. Set executable bits while
there.
Running it once per test case now takes slightly longer than 8s. But
running it once for all of them takes under 0.2s.
Messing with the Makefile to run it only on the tests that need
retesting is clearly not worth the bother.
Expected error output changes because the new normalization strips off
$(SRCDIR)/tests/qapi-schema/ instead of just $(SRCDIR)/.
The .exit files go away, because there is no exit status to test
anymore.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-5-armbru@redhat.com>
Commit bc52d03ff5 "qapi: Make doc comments optional where we don't
need them" made scripts/qapi2texi.py fail[*] unless the schema had
pragma 'doc-required': true. The stated reason was inability to cope
with incomplete documentation.
When commit fb0bc835e5 "qapi-gen: New common driver for code and doc
generators" folded scripts/qapi2texi.py into scripts/qapi-gen.py, it
turned the failure into silent suppression.
The doc generator can cope with incomplete documentation now. I don't
know since when, or what the problem was, or even whether it ever
existed.
Drop the silent suppression.
[*] The fail part was broken, fixed in commit e8ba07ea9a.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191018074345.24034-2-armbru@redhat.com>
While at it, simplify using $(land).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190926111955.17276-3-marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: dad5ddcea3 ("check: Only test usb-ehci when it is compiled in")
Signed-off-by: Thomas Huth <thuth@redhat.com>
The error message for forgotten quotes around a name shows just the
name's first character, which isn't as nice as it could be. Same for
attempting to use a number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-7-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Cover invalid 'if' in struct members, features, union and alternate
branches. Four out of four are broken. Mark FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-6-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Comment typo fixed]
Test flat-union-optional-discriminator declares its union tag as
'*switch': 'Enum', and points to it with 'discriminator': '*switch'.
This gets rejected as "discriminator of flat union 'MyUnion' uses
invalid name '*switch'". Correct; member 'discriminator' doesn't
accept a '*' prefix.
However, this merely tests name validity checking, which we already
cover elsewhere. More interesting is testing the valid name 'switch'.
This reports "discriminator 'switch' is not a member of base struct
'Base'", which is misleading.
Copy the existing 'discriminator': '*switch' test to
flat-union-discriminator-bad-name, and rewrite its comment. Change
flat-union-optional-discriminator to test 'discriminator': 'switch',
and mark it FIXME.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tests duplicate-key and double-data test the same thing. The former
predates the latter, and it has a better name. Delete the latter, and
tweak the former's comment.
Tests include-format-err and include-extra-junk test the same thing.
The former predates the latter, but the latter has a better name and a
comment. Delete the former.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190914153506.2151-3-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We reject empty types with 'boxed': true. We don't really need that
to work, but making it work is actually simpler than rejecting it, so
do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-9-armbru@redhat.com>
Since the previous commit restricted strings to printable ASCII,
\uXXXX's only use is obfuscation. Drop it.
This leaves \\, \/, \', and \". Since QAPI schema strings are all
names, and names are restricted to ASCII letters, digits, hyphen, and
underscore, none of them is useful.
The latter three have no test coverage. Drop them.
Keep \\ to avoid (more) gratuitous incompatibility with JSON.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-8-armbru@redhat.com>
RFC 8259 on string contents:
All Unicode characters may be placed within the quotation marks,
except for the characters that MUST be escaped: quotation mark,
reverse solidus, and the control characters (U+0000 through
U+001F).
The QAPI schema parser accepts both less and more than JSON: it
accepts only ASCII with \u (less), and accepts control characters
other than LF (new line) unescaped. How it treats unescaped non-ASCII
input differs between Python 2 and Python 3.
Make it accept strictly less: require printable ASCII. Drop support
for \b, \f, \n, \r, \t.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190913201349.24332-7-armbru@redhat.com>
The IPMI BT tests had a race condition, if it receive an IPMI command
to enable interrupt, it would write the message to enable interrupts
after it wrote the command response. So the test code could
receive the command response and issue the next command before the
device handled the interrupt enable command, and thus no interrupt.
So send the message to enable interrupt before the command response.
Also add some sleeps to give qemu time to handle responses, there was
no delay before, and it could result in an invalid timeout.
And re-enable the tests, as hopefully they are fixed now.
Note that I was unable to reproduce this even with the instructions
Peter gave me, but hopefully this fixes the issue.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
The check script is already printing out which iotest is currently
running, so printing out the name of the check-block.sh shell script
looks superfluous here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190906113534.10907-1-thuth@redhat.com
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Avoid the repeated inclusions of config-target.mak, which have
risks of namespace pollution, and instead build minimal configuration
files in a configuration script. The same configuration files can
also be included in Makefile and Makefile.qemu
[AJB 10/09/19]
In the original PR this had inadvertently enabled tests
for ppc64abi32. However as the rest of the multiarch tests work rather
than disabling the otherwise correctly functioning build I've just
skipped the failing linux-test test. For some reason I can't debug it
with TCG so I'm leaving that to the PPC maintainers to look at.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-4-pbonzini@redhat.com>
[AJB: s/docker/container/, rm last bits from configure, ppc6432abi hack]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Richard Henderson <rth@twiddle.net>
Rename Makefile.probe to Makefile.prereqs and make it actually
define rules for the tests.
Rename Makefile to Makefile.target, since it is not a toplevel
makefile.
Rename Makefile.include to Makefile.qemu and disentangle it
from the QEMU Makefile.target, so that it is invoked recursively
by tests/Makefile.include. Tests are now placed in
tests/tcg/$(TARGET).
Drop the usage of TARGET_BASE_ARCH, which is ignored by everything except
x86_64 and aarch64. Fix x86 tests by using -cpu max and, while
at it, standardize on QEMU_OPTS for aarch64 tests too.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190807143523.15917-3-pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The current approach to capture the Python version is fragile, as it
was demonstrated by a very specific build of Python 3 on Fedora 29
that, under non-interactive shells would print multiline version
information.
The (badly) stripped version output would be sent to config-host.mak,
producing bad syntax and rendering the makefiles unusable. Now, the
Python versions is printed by configure, but only a simple (and better
controlled variable) indicating whether the build system is using
Python 2 is kept on config-host.mak.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20190826155832.17427-1-crosa@redhat.com>
Reviewed-by: Tony Nguyen <tony.nguyen@bt.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This test will simply check that modules can be loaded, and no symbols
are missing.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
People often forget to run the iotests before submitting patches or pull
requests - this is likely due to the fact that we do not run the tests
during our mandatory "make check" tests yet. Now that we've got a proper
"auto" group of iotests that should be fine to run in every environment,
we can enable the iotests during "make check" again by running the "auto"
tests by default from the check-block.sh script.
Some cases still need to be checked first, though: iotests need bash and
GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
output of some test cases causing them to fail. So if we detect that one
of the required programs is missing or that gprof is enabled, we still
have to skip the iotests to avoid failures.
And finally, since we are using check-block.sh now again, this patch also
removes the qemu-iotests-quick.sh script since we do not need that anymore
(and having two shell wrapper scripts around the block tests seems rather
confusing than helpful).
Message-Id: <20190717111947.30356-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
[AJB: -makecheck to check-block.sh, move check-block to start and gate it]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
These helpers copy the source bitmap to destination bitmap with a
shift either on the src or dst bitmap.
Meanwhile, we never have bitmap tests but we should.
This patch also introduces the initial test cases for utils/bitmap.c
but it only tests the newly introduced functions.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20190603065056.25211-5-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
Bitmap test used sizeof(unsigned long) instead of BITS_PER_LONG.
We make a few sub-directories recursively, in particular
$(TARGET_DIRS).
For goal "all", we do it the nice way: "all" has a prerequisite
subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make
recursively. Behaves nicely with -j and -k.
For other goals such as "clean" and "install", the recipe runs make
recursively in a for loop. Ignores -j and -k.
The next commit will fix that for "clean" and "install". This commit
prepares the ground by renaming the targets we use for "all" to
include the goal for the sub-make. This will permit reusing them for
goals other than "all".
Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename
to T/all, and declare phony.
Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default
goal is "all" for all R. Rename to pc-bios/R/all, and declare phony.
The remainder are renamed just for consistency.
Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to
dtc/all, and declare phony.
Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE)
in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony.
Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is
all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and
declare phony.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190528082308.22032-4-armbru@redhat.com>
[Add compatibility gunk to keep make working across the rename]
Test the AMD command set for parallel flash chips. This test uses an
ARM musicpal board with a pflash drive to test the following list of
currently-supported commands.
- Autoselect
- CFI
- Sector erase
- Chip erase
- Program
- Unlock bypass
- Reset
Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu>
Message-Id: <20190426162624.55977-2-stephen.checkoway@oberlin.edu>
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[PMD: reworded the patch subject, g_assert_cmpint -> cmphex]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190606153803.5278-4-armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJc+B4YAAoJECgfDbjSjVRpq1EIAJR7tCxcpu9GggVlinmUA8G4
tmSAe06IryH7+nF3RsnINuGu7ius9qC2/E2y0uJUHhTqiU/RWOfWZ7PPM0EcYZaA
TLPaCe2NUF6/8afeqmvE9Usk7VspI5TDZRms+bonmZz2xP1lHIMN0qW4s7HHLWr8
sZKDtCJ+9cYII93VQwtlR0qiHgv5f0kzcuZeJaZHsAHH6XZGqRuQjI6txcFa4o53
lkdLCEwTnRuwu2wyL84eL5p+E8SzOgR/x1QI+nffrJfsvnmiT7lnOrkjnQlWAp5G
xqwqsUrUxUCuQ+zitwJqmv+H6nx79MwAM7fTHAETCWX703N5o9tZxAnHHqLoa8I=
=cQNg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci, pc: cleanups, features
stricter rules for acpi tables: we now fail
on any difference that isn't whitelisted.
vhost-scsi migration.
some cleanups all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 05 Jun 2019 20:55:04 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
bios-tables-test: ignore identical binaries
tests: acpi: add simple arm/virt testcase
tests: add expected ACPI tables for arm/virt board
bios-tables-test: list all tables that differ
vhost-scsi: Allow user to enable migration
vhost-scsi: Add VMState descriptor
vhost-scsi: The vhost backend should be stopped when the VM is not running
bios-tables-test: add diff allowed list
vhost: fix memory leak in vhost_user_scsi_realize
vhost: fix incorrect print type
vhost: remove the dead code
docs: smbios: remove family=x from type2 entry description
pci: Fold pci_get_bus_devfn() into its sole caller
pci: Make is_bridge a bool
pcie: Simplify pci_adjust_config_limit()
acpi: pci: use build_append_foo() API to construct MCFG
hw/acpi: Consolidate build_mcfg to pci.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a fat-fingered invocation of tap-merge.pl in the recipe of target
check-report.tap.
Fixes: 9df43317b8 "test: replace gtester with a TAP driver"
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190604080010.23186-1-armbru@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
adds simple arm/virt test case that starts guest with
bios-tables-test.aarch64.iso.qcow2 boot image which
initializes UefiTestSupport* structure in RAM once
guest is booted.
* see commit: tests: acpi: add acpi_find_rsdp_address_uefi() helper
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1559560929-260254-3-git-send-email-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Create an i2c-bus interface, corresponding to the I2CAdapter struct.
Wrap IMXI2C and OMAPI2C with a QOSGraphObject, and add the get_driver
function to retrieve the I2CAdapter.
The conversion is still not complete; for simplicity, i2c_recv and
i2c_send (along with their wrappers) still take an adapter/address
pair. Fixing that would be complicated until the tests are converted
to qgraph, so it is left for after the conversion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some objects are only needed for system emulation and tools.
We can ignore them for the user mode case
Update tests to run accordingly: conditionally build some tests
on CONFIG_BLOCK.
Some tests use components that are only built when softmmu or
block tools are enabled, not for linux-user. So, if these components
are not available, disable the tests.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190401141222.30034-6-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
When possible use generated-files-$(FLAG) to disable
some targets (like KEYCODEMAP_FILES).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20190401141222.30034-3-lvivier@redhat.com>
I recently noticed that test-obj-y contains a file called
tests/check-block-qtest.o which simply does not belong to any .c
file and thus wondered why this is not causing any trouble. It is
only used to add -Itests to the command line (which refers to the
build directory). However, it is not needed because "-iquote $(@D)"
already sets this up in rules.mak. Thus we can simply remove this
variable.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190508075527.32164-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
test-qapi.py doesn't force a specific encoding for stderr or
stdout, but the reference files used by check-qapi-schema are in
UTF-8. This breaks check-qapi-schema under certain circumstances
(e.g. if using the C locale and Python < 3.7).
We need to make sure test-qapi.py always generate UTF-8 output
somehow. On Python 3.7+ we can do it using
`sys.stdout.reconfigure(...)`, but we need a solution that works
with older Python versions.
Instead of trying a hack like reopening sys.stdout and
sys.stderr, we can just tell Python to use UTF-8 for I/O encoding
when running test-qapi.py. Do it by setting PYTHONIOENCODING.
Reported-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190506213817.14344-1-ehabkost@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, some tests contains target architecture information, in the
form of a "x86_64" tag. But that tag is not respected in the default
execution, that is, "make check-acceptance" doesn't do anything with
it.
That said, even the target architecture handling currently present in
the "avocado_qemu.Test" class is pretty limited. For instance, by
default, it chooses a target based on the host architecture.
Because the original implementation of the tags feature in Avocado did
not include any time of namespace or "key:val" mechanism, no tag has
relation to another tag. The new implementation of the tags feature
from version 67.0 onwards, allows "key:val" tags, and because of that,
a test can be classified with a tag in a given key. For instance, the
new proposed version of the "boot_linux_console.py" test, which
downloads and attempts to run a x86_64 kernel, is now tagged as:
🥑 tags=arch:x86_64
This means that it can be filtered (out) when no x86_64 target is
available. At the same time, tests that don't have a "arch:" tag,
will not be filtered out.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-6-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The current version of the "check-acceptance" target will only show
one line for execution of all tests. That's probably OK if the tests
to be run are quick enough and they're always the same.
But, there's already one test alone that takes on average ~5 seconds
to run, we intend to adapt the list of tests to match the user's build
environment (among other choices).
Because of that, let's present the default Avocado UI by default.
Users can always choose a different output by setting the AVOCADO_SHOW
variable.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Caio Carrara <ccarrara@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190312171824.5134-2-crosa@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In commit b94b330e23 ("tests: add missing dependency to build
QTEST_QEMU_BINARY", 2017-07-31), Phil fixed the dependency list of make
target "check-qtest-%". Namely, the recipe would set QTEST_QEMU_BINARY to
the softmmu emulator for the emulation target, but the prerequisites
didn't include the emulator.
The same issue affects the "check-report-qtest-%.tap" make target, which
is the other make target whose recipe sets QTEST_QEMU_BINARY:
> $ make -j4 check-report-qtest-aarch64.tap
> TAP check-report-qtest-aarch64.tap
> sh: /.../aarch64-softmmu/qemu-system-aarch64: No such file or directory
Apply Phil's fix to this make target too.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daud <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daud <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This removes the duplicated initialization code.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While used by TCG it is not explicitly part of TCG and the tests can
be run standalone in a minimal build.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
-----BEGIN PGP SIGNATURE-----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=GCRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qcow2: Support for external data files
- qcow2: Default to 4KB for the qcow2 cache entry size
- Apply block driver whitelist for -drive format=help
- Several qemu-iotests improvements
# gpg: Signature made Fri 08 Mar 2019 12:54:27 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (33 commits)
qcow2 spec: Describe string header extensions
qemu-iotests: Add dependency to qemu-nbd tool
ahci-test: Add dependency to qemu-img tool
qemu-iotests: amend with external data file
qemu-iotests: General tests for qcow2 with external data file
qemu-iotests: Preallocation with external data file
qcow2: Implement data-file-raw create option
qcow2: Store data file name in the image
qcow2: Creating images with external data file
qcow2: Add basic data-file infrastructure
qcow2: Support external data file in qemu-img check
qcow2: Return error for snapshot operation with data file
qcow2: External file I/O
qcow2: Prepare qcow2_co_block_status() for data file
qcow2: Return 0/-errno in qcow2_alloc_compressed_cluster_offset()
qcow2: Don't assume 0 is an invalid cluster offset
qcow2: Prepare count_contiguous_clusters() for external data file
qcow2: Prepare qcow2_get_cluster_type() for external data file
qcow2: Pass bs to qcow2_get_cluster_type()
qcow2: Basic definitions for external data files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since a9660664fd, some iotests use qemu-nbd.
Add a dependency to build it before using it.
This fixes:
$ make check-block
GEN qemu-img-cmds.h
CC qemu-img.o
LINK qemu-img
CC qemu-io.o
LINK qemu-io
CC tests/qemu-iotests/socket_scm_helper.o
LINK tests/qemu-iotests/socket_scm_helper
tests/qemu-iotests-quick.sh
check: qemu-nbd not found
make: *** [tests/Makefile.include:1059: check-tests/qemu-iotests-quick.sh] Error 1
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since the ahci-test uses qemu-img, add a dependency to build it
before using it.
This fixes:
$ gmake check-qtest V=1
QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 QTEST_QEMU_IMG=qemu-img tests/ahci-test
Failed to execute child process "/tmp/qemu-test.19tMRF/qemu-img" (No such file or directory)
ERROR:tests/libqos/libqos.c:192:mkimg: assertion failed: (ret && !err)
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Convert tests/megasas-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/e1000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/eepro100-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
For now, all nodes share the same constructor and destructor.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/es1370-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/vmxnet3-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/usb-hcd-ohci-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/spapr-phb-test to a qgraph test node,
spapr-phb-test. This test adds another
spapr-pci-host-bridge device in the
ppc64/pseries machine
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/pcnet-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/nvme-test to a driver node; the code to discover the PCI
device is replaced by generic qgraph code, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ne2000-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
The actual device consumed by the test is ne2k_pci.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ipoctal232-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
This test creates a tpci200 node that produces an interface ipack
consumed by the ipoctal232 device.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/tpci200-test to a driver node; currently it runs
the PCI nop test only, but it also produces the ipack interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/ac97-test to a driver node; currently it runs
the PCI nop test only, therefore we're not placing it in tests/libqos.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining test that needs libqos-virtio-obj-y is drive_del-test,
which really only needs a function. Move that function to the test
and remove libqos-virtio-obj-y.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-scsi-test in qgraph test node,
virtio-scsi-test. This test consumes a virtio-scsi interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-scsi-pci, so they
don't consume virtio-scsi, but virtio-scsi-pci
Note that this test does not allocate any virtio-scsi structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-scsi-pci and virtio-scsi-device.
Both nodes produce virtio-scsi, but virtio-scsi-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and its functions,
while virtio-scsi-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism. Nevertheless,
vhost-user-test is a bit more complex than the other tests, because
it requires more complicated setup of back-ends and thus almost each
test has a slightly different opts.before function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-net-pci, so they
don't consume virtio-net, but virtio-net-pci
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-net-pci and virtio-net-device.
Both nodes produce virtio-net, but virtio-net-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-net-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-blk-test in qgraph test node,
virtio-blk-test. This test consumes a virtio-blk interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-blk-pci, so they
don't consume virtio-blk, but virtio-blk-pci
Note that this test does not allocate any virtio-blk structure,
it's all done by the qtest walking graph mechanism. The allocator
is also provided by qgraph; remove malloc-generic.c and malloc-generic.h
which are not used anymore.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-blk-pci and virtio-blk-device.
Both nodes produce virtio-blk, but virtio-blk-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-blk-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-rng-test in qgraph test node,
virtio-rng-test. This test consumes a virtio-rng interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-rng-pci, so they
don't consume virtio-rng, but virtio-rng-pci
Note that this test does not allocate any virtio-rng structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-rng-pci and virtio-rng-device.
Both nodes produce virtio-rng, but virtio-rng-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-rng-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The tests/virtio-balloon-test is covered by generic virtio tests,
so remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Add qgraph nodes for virtio-balloon-pci and virtio-balloon-device.
Both nodes produce virtio-balloon, but virtio-balloon-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-balloon-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-9p-test into a qgraph test node.
This test consumes a virtio-9p interface and checks that its functions
return the expected values.
Note that this test does not allocate any virtio-9p structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-9p-pci and virtio-9p-device.
Both nodes produce virtio-9p, but virtio-9p-pci receives
a pci-bus and overrides virtio-pci QOSGraphObject and its functions,
while virtio-9p-device receives a virtio and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/virtio-console-test and tests/virtio-serial-test
in qgraph test node. This test consumes a virtio-serial interface
and checks that its function return the expected values.
Note that this test does not allocate any virtio-console or
virtio-serial structure, it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-serial-pci and virtio-serial-device.
Both nodes produce virtio-serial, but virtio-serial-pci receives
a pci-bus and uses virtio-pci QOSGraphObject and functions,
while virtio-serial-device receives a virtio-bus and implements
its own functions
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/virt machine to the graph. This machine contains virtio-mmio, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add QOSGraphObject to QVirtioPCIDevice structure, with a basic
constructor. virtio-pci is not present in qgraph, since it
will be used as starting point by its subclasses (virtio-*-pci)
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/e1000e-test in qgraph test node, e1000e-test. This test
consumes an e1000e interface and checks that its function return the
expected values.
Note that this test does not allocate any e1000e structure, it's all done by the
qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for virtio-e1000e.
It consumes a pci-bus, and it's directly used by tests
(e1000e is pci based).
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pseries machine for the ppc64 QEMU binary. This machine contains a
spapr-pci-host-bridge driver, that contains itself a pci-bus-spapr
that produces the pci-bus interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pci-bus-spapr node, that produces pci-bus. Move QPCIBusSPAPR struct
declaration in its header (since it will be needed by other drivers)
and introduce a setter method for drivers that do not need to allocate
but have to initialize QPCIBusSPAPR.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert tests/sdhci-test in first qgraph test node, sdhci-test. This test
consumes an sdhci interface and checks that its function return the
expected values.
Note that this test does not allocate any sdhci structure, it's all done by the
qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xlnx-zcu102 machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add xilinx-zynq-a9 machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/sabrelite machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/smdkc210 machine machine to the graph. This machine contains generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add arm/raspi2 machine to the graph. This machine contains a generic-sdhci, so
its constructor must take care of setting it properly when called.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph nodes for sdhci-pci and generic-sdhci (memory mapped) drivers.
Both drivers implement (produce) the same interface sdhci, that provides the
readw - readq - writeq functions.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pc machine for the x86_64 QEMU binary. This machine contains an i440FX-pcihost
driver, that contains itself a pci-bus-pc that produces the pci-bus interface.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add pci-bus-pc node, move QPCIBusPC struct declaration in its header
(since it will be needed by other drivers) and introduce a setter method
for drivers that do not need to allocate but have to initialize QPCIBusPC.
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add qgraph API that allows to add/remove nodes and edges from the graph,
implementation of Depth First Search to discover the paths and basic unit
test to check correctness of the API.
Included also a main executable that takes care of starting the framework,
create the nodes, set the available drivers/machines, discover the path and
run tests.
graph.h provides the public API to manage the graph nodes/edges
graph_extra.h provides a more private API used successively by the gtest integration part
qos-test.c provides the main executable
Signed-off-by: Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
[Paolo's changes compared to the Google Summer of Code submission:
* added subprocess to test options
* refactored object creation to support live migration tests
* removed driver .before callback (unused)
* removed test .after callbacks (replaced by GTest destruction queue)]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The #include directives to pull in sub-modules use file names relative
to the main module. Works only when all modules are in the same
directory, or the main module's output directory is in the compiler's
include path. Use relative file names instead.
The dummy variable we generate to avoid empty .o files has an invalid
name for sub-modules in other directories. Fix that.
Both messed up in commit 252dc3105f "qapi: Generate separate .h, .c
for each module". Escaped testing because tests/qapi-schema-test.json
doesn't cover sub-modules in other directories, only
tests/qapi-schema/include-relpath.json does, and we generate and
compile C code only for the former, not the latter. Fold the latter
into the former. This would have caught the mistakes fixed in this
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190301154051.23317-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We now expose qemu_announce_self through QMP and HMP. Add a test
with some very basic packet validation (make sure we get a RARP).
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
