Commit 97f4030 changed warning messages from
timestamp-if-enabled progname ":" location "warning: " message
to
"warning: " timestamp-if-enabled progname ":" location message
This regressed qemu-iotests 051. Put "warning: " right back where it
was, along with "info: ".
Reported-by: Kevin Wolf <kwolf@redhat.com>
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1500449614-16811-1-git-send-email-armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Clang 3.9 passes the CONFIG_AVX2_OPT configure test. However, the
supplied <cpuid.h> does not contain the bit_AVX2 define that we use
when detecting whether the routine can be enabled.
Introduce a qemu-specific header that uses the compiler's definition
of __cpuid et al, but supplies any missing bit_* definitions needed.
This avoids introducing any extra ifdefs to util/bufferiszero.c, and
allows quite a few to be removed from tcg/i386/tcg-target.inc.c.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170719044018.18063-1-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
migrate-set-parameters sets migration parameters according to is
arguments like this:
* Present means "set the parameter to this value"
* Absent means "leave the parameter unchanged"
* Except for parameters tls_creds and tls_hostname, "" means "reset
the parameter to its default value
The first two are perfectly normal: presence of the parameter makes
the command do something.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is neither a valid TLS credentials ID, nor a valid
host name.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "reset to default" is not general, as
suitable invalid values need not exist. I also find it ugly.
To clean this up, we could add a separate flag argument to ask for
"reset to default", or add a distinct value to @tls_creds and
@tls_hostname. This commit implements the latter: add JSON null to
the values of @tls_creds and @tls_hostname, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_migrate_set_parameters() rewrite null
to "" before anything else can see the null. The proper way to do it
would be rewriting "" to null, but that requires fixing up code to
work with null. Add TODO comments for that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Commit de63ab6 "migrate: Share common MigrationParameters struct"
reused MigrationParameters for the arguments of
migrate-set-parameters, with the following rationale:
It is rather verbose, and slightly error-prone, to repeat
the same set of parameters for input (migrate-set-parameters)
as for output (query-migrate-parameters), where the only
difference is whether the members are optional. We can just
document that the optional members will always be present
on output, and then share a common struct between both
commands. The next patch can then reduce the amount of
code needed on input.
I need to unshare them to correct a design flaw in a stupid, but
minimally invasive way, in the next commit. We can restore the
sharing when we redo that patch in a less stupid way. Add a suitable
TODO comment.
Note that I revert only the sharing part of commit de63ab6, not the
part that made the members of query-migrate-parameters' result
optional. The schema (and thus introspection) remains inaccurate for
query-migrate-parameters. If we decide not to restore the sharing, we
should revert that part, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qmp_query_migrate_parameters() and qmp_migrate_set_parameters()
effectively duplicate QAPI_CLONE() inline. Add suitable TODO
comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Optional MigrationParameters members tls_creds and tls_hostname can't
actually be absent outside qmp_migrate_set_parameters() since commit
4af245d (v2.9.0).
Note that commit 4af245d reverted the part of commit de63ab6 (v2.8.0)
that made tls_creds and tls_hostname absent instead of "" in the value
of query-migrate-parameters, even though commit de63ab6 called that a
mistake. What a mess.
Drop the redundant tests for presence, and update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The bulk of hmp_migrate_set_parameter()'s code sets one member of
MigrationParameters according to the command's arguments. It uses a
string visitor for integer and boolean members, but not for string and
size members. It calls visit_type_bool() right away, but delays
visit_type_int() some. The delaying requires a flag variable and a
bit of trickery: we set all integer members instead of just the one we
want, and rely on the has_FOOs to mask the unwanted ones.
Clean this up as follows. Don't delay calling visit_type_int(). Use
the string visitor for strings, too. This involves extra allocations
and cleanup, but doing them is simpler and cleaner than avoiding them.
Sadly, using the string visitor for sizes isn't possible, because it
defaults to Bytes rather than Mebibytes. Add a comment explaining
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
BlockdevRef is an alternate of BlockdevOptions (inline definition) and
str (reference to an existing block device by name). BlockdevRef
value "" is special: "no block device should be referenced." It's
actually interpreted that way in just one place: optional member
@backing of COW formats. Semantics:
* Present means "use this block device" as backing storage
* Absent means "default to the one stored in the image"
* Except "" means "don't use backing storage at all"
The first two are perfectly normal: when the parameter is absent, it
defaults to an implied value, but the value's meaning is the same.
The third one overloads the parameter with a second meaning. The
overloading is *implicit*, i.e. it's not visible in the types. Works
here, because "" is not a value block device ID.
Pressing argument values the schema accepts, but are semantically
invalid, into service to mean "do something else entirely" is not
general, as suitable invalid values need not exist. I also find it
ugly.
To clean this up, we could add a separate flag argument to suppress
@backing, or add a distinct value to @backing. This commit implements
the latter: add JSON null to the values of @backing, deprecate "".
Because we're so close to the 2.10 freeze, implement it in the
stupidest way possible: have qmp_blockdev_add() rewrite null to ""
before anything else can see the null. Works, because BlockdevRef
occurs only within arguments of blockdev-add. The proper way to do it
would be rewriting "" to null, preferably in a cleaner way, but that
requires fixing up code to work with null. Add a TODO comment for
that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
test_visitor_in_alternate() tests UserDefAlternate with inadmissible
input. test_visitor_in_fail_alternate() does basically the same.
Drop the former, keep the latter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
I expect the 'null' type to be useful mostly for members of alternate
types.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Make visit_type_null() take an @obj argument like its buddies. This
helps keep the next commit simple.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Under certain circumstances normal xen-mapcache functioning may be broken
by guest's actions. This may lead to either QEMU performing exit() due to
a caught bad pointer (and with QEMU process gone the guest domain simply
appears hung afterwards) or actual use of the incorrect pointer inside
QEMU address space -- a write to unmapped memory is possible. The bug is
hard to reproduce on a i440 machine as multiple DMA sources are required
(though it's possible in theory, using multiple emulated devices), but can
be reproduced somewhat easily on a Q35 machine using an emulated AHCI
controller -- each NCQ queue command slot may be used as an independent
DMA source ex. using READ FPDMA QUEUED command, so a single storage
device on the AHCI controller port will be enough to produce multiple DMAs
(up to 32). The detailed description of the issue follows.
Xen-mapcache provides an ability to map parts of a guest memory into
QEMU's own address space to work with.
There are two types of cache lookups:
- translating a guest physical address into a pointer in QEMU's address
space, mapping a part of guest domain memory if necessary (while trying
to reduce a number of such (re)mappings to a minimum)
- translating a QEMU's pointer back to its physical address in guest RAM
These lookups are managed via two linked-lists of structures.
MapCacheEntry is used for forward cache lookups, while MapCacheRev -- for
reverse lookups.
Every guest physical address is broken down into 2 parts:
address_index = phys_addr >> MCACHE_BUCKET_SHIFT;
address_offset = phys_addr & (MCACHE_BUCKET_SIZE - 1);
MCACHE_BUCKET_SHIFT depends on a system (32/64) and is equal to 20 for
a 64-bit system (which assumed for the further description). Basically,
this means that we deal with 1 MB chunks and offsets within those 1 MB
chunks. All mappings are created with 1MB-granularity, i.e. 1MB/2MB/3MB
etc. Most DMA transfers typically are less than 1MB, however, if the
transfer crosses any 1MB border(s) - than a nearest larger mapping size
will be used, so ex. a 512-byte DMA transfer with the start address
700FFF80h will actually require a 2MB range.
Current implementation assumes that MapCacheEntries are unique for a given
address_index and size pair and that a single MapCacheEntry may be reused
by multiple requests -- in this case the 'lock' field will be larger than
1. On other hand, each requested guest physical address (with 'lock' flag)
is described by each own MapCacheRev. So there may be multiple MapCacheRev
entries corresponding to a single MapCacheEntry. The xen-mapcache code
uses MapCacheRev entries to retrieve the address_index & size pair which
in turn used to find a related MapCacheEntry. The 'lock' field within
a MapCacheEntry structure is actually a reference counter which shows
a number of corresponding MapCacheRev entries.
The bug lies in ability for the guest to indirectly manipulate with the
xen-mapcache MapCacheEntries list via a special sequence of DMA
operations, typically for storage devices. In order to trigger the bug,
guest needs to issue DMA operations in specific order and timing.
Although xen-mapcache is protected by the mutex lock -- this doesn't help
in this case, as the bug is not due to a race condition.
Suppose we have 3 DMA transfers, namely A, B and C, where
- transfer A crosses 1MB border and thus uses a 2MB mapping
- transfers B and C are normal transfers within 1MB range
- and all 3 transfers belong to the same address_index
In this case, if all these transfers are to be executed one-by-one
(without overlaps), no special treatment necessary -- each transfer's
mapping lock will be set and then cleared on unmap before starting
the next transfer.
The situation changes when DMA transfers overlap in time, ex. like this:
|===== transfer A (2MB) =====|
|===== transfer B (1MB) =====|
|===== transfer C (1MB) =====|
time --->
In this situation the following sequence of actions happens:
1. transfer A creates a mapping to 2MB area (lock=1)
2. transfer B (1MB) tries to find available mapping but cannot find one
because transfer A is still in progress, and it has 2MB size + non-zero
lock. So transfer B creates another mapping -- same address_index,
but 1MB size.
3. transfer A completes, making 1st mapping entry available by setting its
lock to 0
4. transfer C starts and tries to find available mapping entry and sees
that 1st entry has lock=0, so it uses this entry but remaps the mapping
to a 1MB size
5. transfer B completes and by this time
- there are two locked entries in the MapCacheEntry list with the SAME
values for both address_index and size
- the entry for transfer B actually resides farther in list while
transfer C's entry is first
6. xen_ram_addr_from_mapcache() for transfer B gets correct address_index
and size pair from corresponding MapCacheRev entry, but then it starts
looking for MapCacheEntry with these values and finds the first entry
-- which belongs to transfer C.
At this point there may be following possible (bad) consequences:
1. xen_ram_addr_from_mapcache() will use a wrong entry->vaddr_base value
in this statement:
raddr = (reventry->paddr_index << MCACHE_BUCKET_SHIFT) +
((unsigned long) ptr - (unsigned long) entry->vaddr_base);
resulting in an incorrent raddr value returned from the function. The
(ptr - entry->vaddr_base) expression may produce both positive and negative
numbers and its actual value may differ greatly as there are many
map/unmap operations take place. If the value will be beyond guest RAM
limits then a "Bad RAM offset" error will be triggered and logged,
followed by exit() in QEMU.
2. If raddr value won't exceed guest RAM boundaries, the same sequence
of actions will be performed for xen_invalidate_map_cache_entry() on DMA
unmap, resulting in a wrong MapCacheEntry being unmapped while DMA
operation which uses it is still active. The above example must
be extended by one more DMA transfer in order to allow unmapping as the
first mapping in the list is sort of resident.
The patch modifies the behavior in which MapCacheEntry's are added to the
list, avoiding duplicates.
Signed-off-by: Alexey Gerasimenko <x1917x@gmail.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
Solaris 9 was released in 2002, its successor Solaris 10 was
released in 2005, and Solaris 9 was end-of-lifed in 2014.
Nobody has stepped forward to express interest in supporting
Solaris of any flavour, so removing support for the ancient
versions seems uncontroversial.
In particular, this allows us to remove a use of 'uname'
in configure that won't work if you're cross-compiling.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1499955697-28045-1-git-send-email-peter.maydell@linaro.org
For a very long time we have used 'uname -s' as our fallback if
we don't identify the target OS using a compiler #define. This
obviously doesn't work for cross-compilation, and we've had
a comment suggesting we fix this in configure for a long time.
Since we now have an exhaustive list of which OSes we can run
on (thanks to commit 898be3e041 making an unrecognized OS
be a fatal error), we know which ones we're missing.
Add check_define tests for the remaining OSes we support. The
defines checked are based on ones we already use in the codebase for
identifying the host OS (with the exception of GNU/kFreeBSD).
We can now set bogus_os immediately rather than doing it later.
We leave the comment about uname being bad untouched, since
there is still a use of it for the fallback for unrecognized
host CPU type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1499958932-23839-1-git-send-email-peter.maydell@linaro.org
On OpenBSD the compiler warns:
bsd-user/main.c:622:21: warning: variable 'sig' set but not used [-Wunused-but-set-variable]
This is because a lot of the signal delivery code is #if-0'd
out as unused. Reshuffle #ifdefs a bit to silence the warning.
(We make the minimum change here rather than removing all the
bsd-user patchset which should make this all work correctly and
there's no point giving them an awkward rebase task.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1500395194-21455-5-git-send-email-peter.maydell@linaro.org
On OpenBSD the compiler complains:
bsd-user/bsdload.c:54:17: warning: variable 'id_change' set but not used [-Wunused-but-set-variable]
This is dead code that was originally copied from linux-user.
We fixed this in linux-user in commit 331c23b5ca in 2011;
delete the useless code from bsd-user too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 1500395194-21455-4-git-send-email-peter.maydell@linaro.org
Since commit cfc87e00 "block/vpc.c: Handle write failures in
get_image_offset()" older versions of gcc (in this case 4.7) incorrectly
warn that "ret" can be used uninitialised in vpc_co_pwritev().
Setting ret to 0 at the start of vpc_co_pwritev() prevents the warning
in gcc 4.7 and enables compilation with -Werror to succeed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500625265-23844-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Changes:
* Add Enhanced Virtual Addressing (EVA) support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)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=qlJH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/yongbok/tags/mips-20170721' into staging
MIPS patches 2017-07-21
Changes:
* Add Enhanced Virtual Addressing (EVA) support
# gpg: Signature made Fri 21 Jul 2017 03:25:15 BST
# gpg: using RSA key 0x2238EB86D5F797C2
# gpg: Good signature from "Yongbok Kim <yongbok.kim@imgtec.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8600 4CF5 3415 A5D9 4CFA 2B5C 2238 EB86 D5F7 97C2
* remotes/yongbok/tags/mips-20170721:
target/mips: Enable CP0_EBase.WG on MIPS64 CPUs
target/mips: Add EVA support to P5600
target/mips: Implement segmentation control
target/mips: Add segmentation control registers
target/mips: Add an MMU mode for ERL
target/mips: Abstract mmu_idx from hflags
target/mips: Check memory permissions with mem_idx
target/mips: Decode microMIPS EVA load & store instructions
target/mips: Decode MIPS32 EVA load & store instructions
target/mips: Prepare loads/stores for EVA
target/mips: Add CP0_Ebase.WG (write gate) support
target/mips: Weaken TLB flush on UX,SX,KX,ASID changes
target/mips: Fix TLBWI shadow flush for EHINV,XI,RI
target/mips: Fix MIPS64 MFC0 UserLocal on BE host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZbdw6AAoJEPvQ2wlanipEd3UH/0z2oPZanlGonjPtmS2DjLmU
xvf5EgCNYE0VwBYqycSeXd5pVSVtfkAXi9EBIBzF64FjySV131k3T9iUGVnMHC8w
RzwSk/6FDldUhJWIeXRsMC1zwJuOyhe2PTZ228zmeCr+gMJ8v5znfWFG7bt7xPxm
ACfDxA+bWfwyfObmWWBGiqemTAnPYK9eZLoTFWKp7fjSlnhR+Vwl4nksdAs0P/sm
BOZ2QO8AqRd8z8vV7r+DKYmxLltLHGds8Bq1UOfPcoCqGlEcX8enWUG7lLPS530c
41RRGlWPEiTgat0PBAembxShCHHltY8jPr7C7hcwo42GIWIL97LxApM6K4FXcAQ=
=Pk5d
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2' into staging
Final CI updates for soft-freeze
Tweaks from Paolo for J=x Travis compiles
Bunch of updated cross-compile targets from Philippe
Additional debug tools in travis image from Me
# gpg: Signature made Tue 18 Jul 2017 11:00:26 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-ci-updates-for-softfreeze-180717-2: (32 commits)
docker: install clang since Shippable setup_ve() verify it is available
docker: warn users to use newer debian8/debian9 base image
docker: add debian Ports base image
shippable: add win32/64 targets
docker: add MXE (M cross environment) base image for MinGW-w64
shippable: add mips64el targets
docker: add debian/mips64el image
shippable: use debian/mips[eb] targets
docker: add debian/mips[eb] images
shippable: add powerpc target
docker: add debian/powerpc based on Jessie
docker: add 'apt-fake' script which generate fake debian packages
docker: add qemu:debian-jessie based on outdated jessie release
shippable: add x86_64 targets
shippable: add ppc64el targets
shippable: add armel targets
docker: enable nettle to extend code coverage on arm64
docker: enable gcrypt to extend code coverage on amd64
docker: enable netmap to extend code coverage on amd64
docker: enable virgl to extend code coverage on amd64
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix various warnings about set-but-not-used variables on OpenBSD:
bsd-user/elfload.c:1158:15: warning: variable 'mapped_addr' set but not used [-Wunused-but-set-variable]
bsd-user/elfload.c:1165:9: warning: variable 'status' set but not used [-Wunused-but-set-variable]
bsd-user/elfload.c:1168:15: warning: variable 'elf_stack' set but not used [-Wunused-but-set-variable]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500395194-21455-3-git-send-email-peter.maydell@linaro.org
Avoid a compiler warning on OpenBSD:
bsd-user/mmap.c:28:1: warning: '__thread' is not at beginning of declaration [-Wold-style-declaration]
by moving the __thread attribute to its proper place.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500395194-21455-2-git-send-email-peter.maydell@linaro.org
On NetBSD, where tolower() and toupper() are implemented using an
array lookup, the compiler warns if you pass a plain 'char'
to these functions:
gdbstub.c:914:13: warning: array subscript has type 'char'
This reflects the fact that toupper() and tolower() give
undefined behaviour if they are passed a value that isn't
a valid 'unsigned char' or EOF.
We have qemu_tolower() and qemu_toupper() to avoid this problem;
use them.
(The use in scsi-generic.c does not trigger the warning because
it passes a uint8_t; we switch it anyway, for consistency.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> for the s390 part.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1500568290-7966-1-git-send-email-peter.maydell@linaro.org
On NetBSD the compiler warns:
util/oslib-posix.c: In function 'sigaction_invoke':
util/oslib-posix.c:589:5: warning: missing braces around initializer [-Wmissing-braces]
siginfo_t si = { 0 };
^
util/oslib-posix.c:589:5: warning: (near initialization for 'si.si_pad') [-Wmissing-braces]
because on this platform siginfo_t is defined as
typedef union siginfo {
char si_pad[128]; /* Total size; for future expansion */
struct _ksiginfo _info;
} siginfo_t;
Avoid this warning by initializing the struct with {} instead;
this is a GCC extension but we use it all over the codebase already.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1500568341-8389-1-git-send-email-peter.maydell@linaro.org
Enable the CP0_EBase.WG (write gate) on the I6400 and MIPS64R2-generic
CPUs. This allows 64-bit guests to run KVM itself, which uses
CP0_EBase.WG to point CP0_EBase at XKPhys.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add the Enhanced Virtual Addressing (EVA) feature to the P5600 core
configuration, along with the related Segmentation Control (SC) feature
and writable CP0_EBase.WG bit.
This allows it to run Malta EVA kernels.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Implement the optional segmentation control feature in the virtual to
physical address translation code.
The fixed legacy segment and xkphys handling is replaced with a dynamic
layout based on the segmentation control registers (which should be set
up even when the feature is not exposed to the guest).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
The optional segmentation control registers CP0_SegCtl0, CP0_SegCtl1 &
CP0_SegCtl2 control the behaviour and required privilege of the legacy
virtual memory segments.
Add them to the CP0 interface so they can be read and written when
CP0_Config3.SC=1, and initialise them to describe the standard legacy
layout so they can be used in future patches regardless of whether they
are exposed to the guest.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
The segmentation control feature allows a legacy memory segment to
become unmapped uncached at error level (according to CP0_Status.ERL),
and in fact the user segment is already treated in this way by QEMU.
Add a new MMU mode for this state so that QEMU's mappings don't persist
between ERL=0 and ERL=1.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
[yongbok.kim@imgtec.com:
cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
The MIPS mmu_idx is sometimes calculated from hflags without an env
pointer available as cpu_mmu_index() requires.
Create a common hflags_mmu_index() for the purpose of this calculation
which can operate on any hflags, not just with an env pointer, and
update cpu_mmu_index() itself and gen_intermediate_code() to use it.
Also update debug_post_eret() and helper_mtc0_status() to log the MMU
mode with the status change (SM, UM, or nothing for kernel mode) based
on cpu_mmu_index() rather than directly testing hflags.
This will also allow the logic to be more easily updated when a new MMU
mode is added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
When performing virtual to physical address translation, check the
required privilege level based on the mem_idx rather than the mode in
the hflags. This will allow EVA loads & stores to operate safely only on
user memory from kernel mode.
For the cases where the mmu_idx doesn't need to be overridden
(mips_cpu_get_phys_page_debug() and cpu_mips_translate_address()), we
calculate the required mmu_idx using cpu_mmu_index(). Note that this
only tests the MIPS_HFLAG_KSU bits rather than MIPS_HFLAG_MODE, so we
don't test the debug mode hflag MIPS_HFLAG_DM any longer. This should be
fine as get_physical_address() only compares against MIPS_HFLAG_UM and
MIPS_HFLAG_SM, neither of which should get set by compute_hflags() when
MIPS_HFLAG_DM is set.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Implement decoding of microMIPS EVA load and store instruction groups in
the POOL31C pool. These use the same gen_ld(), gen_st(), gen_st_cond()
helpers as the MIPS32 decoding, passing the equivalent MIPS32 opcodes as
opc.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Implement decoding of MIPS32 EVA loads and stores. These access the user
address space from kernel mode when implemented, so for each instruction
we need to check that EVA is available from Config5.EVA & check for
sufficient COP0 privilege (with the new check_eva()), and then override
the mem_idx used for the operation.
Unfortunately some Loongson 2E instructions use overlapping encodings,
so we must be careful not to prevent those from being decoded when EVA
is absent.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
EVA load and store instructions access the user mode address map, so
they need to use mem_idx of MIPS_HFLAG_UM. Update the various utility
functions to allow mem_idx to be more easily overridden from the
decoding logic.
Specifically we add a mem_idx argument to the op_ld/st_* helpers used
for atomics, and a mem_idx local variable to gen_ld(), gen_st(), and
gen_st_cond().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Add support for the CP0_EBase.WG bit, which allows upper bits to be
written (bits 31:30 on MIPS32, or bits 63:30 on MIPS64), along with the
CP0_Config5.CV bit to control whether the exception vector for Cache
Error exceptions is forced into KSeg1.
This is necessary on MIPS32 to support Segmentation Control and Enhanced
Virtual Addressing (EVA) extensions (where KSeg1 addresses may not
represent an unmapped uncached segment).
It is also useful on MIPS64 to allow the exception base to reside in
XKPhys, and possibly out of range of KSEG0 and KSEG1.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
minor changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
There is no need to invalidate any shadow TLB entries when the ASID
changes or when access to one of the 64-bit segments has been disabled,
since doing so doesn't reveal to software whether any TLB entries have
been evicted into the shadow half of the TLB.
Therefore weaken the tlb flushes in these cases to only flush the QEMU
TLB.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Writing specific TLB entries with TLBWI flushes shadow TLB entries
unless an existing entry is having its access permissions upgraded. This
is necessary as software would from then on expect the previous mapping
in that entry to no longer be in effect (even if QEMU has quietly
evicted it to the shadow TLB on a TLBWR).
However it won't do this if only EHINV, XI, or RI bits have been set,
even if that results in a reduction of permissions, so add the necessary
checks to invoke the flush when these bits are set.
Fixes: 2fb58b7374 ("target-mips: add RI and XI fields to TLB entry")
Fixes: 9456c2fbcd ("target-mips: add TLBINV support")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Yongbok Kim <yongbok.kim@imgtec.com>
[yongbok.kim@imgtec.com:
cosmetic changes]
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Using MFC0 to read CP0_UserLocal uses tcg_gen_ld32s_tl, however
CP0_UserLocal is a target_ulong. On a big endian host with a MIPS64
target this reads and sign extends the more significant half of the
64-bit register.
Fix this by using ld_tl to load the whole target_ulong and ext32s_tl to
sign extend it, as done for various other target_ulong COP0 registers.
Fixes: d279279e2b ("target-mips: implement UserLocal Register")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
In various places in our test makefiles and scripts we use the
shell $RANDOM to create a random number. This is a bash
specific extension, and doesn't work on other shells.
With dash the shell doesn't complain, it just effectively
always evaluates $RANDOM to 0:
echo $((RANDOM + 32768)) => 32768
However, on NetBSD the shell will complain:
"-sh: arith: syntax error: "RANDOM + 32768"
which means that "make check" fails.
Switch to using "${RANDOM:-0}" instead of $RANDOM,
which will portably either give us a random number or zero.
This means that on non-bash shells we don't get such
good test coverage via the MALLOC_PERTURB_ setting, but
we were already in that situation for non-bash shells.
Our only other uses of $RANDOM (in tests/qemu-iotests/check
and tests/qemu-iotests/162) are in shell scripts which use
a #!/bin/bash line so they are always run under bash.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1500029117-6387-1-git-send-email-peter.maydell@linaro.org
Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.
This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
added commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than relying on everywhere that cares about whether the host
supports ivshmem using CONFIG_EVENTFD, make configure set an explicit
CONFIG_IVSHMEM.
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-3-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch, add commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current CONFIG_IVSHMEM is confusing, because it looks like it's a
flag for "do we have ivshmem support?", but actually it's a flag for
"is the ivshmem PCI device being compiled?" (and implicitly "do we
have ivshmem support?" is tested with CONFIG_EVENTFD).
Rename it to CONFIG_IVSHMEM_DEVICE to clear this confusion up;
shortly we will add a new CONFIG_IVSHMEM which really does indicate
whether the host can support ivshmem.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1500021225-4118-2-git-send-email-peter.maydell@linaro.org
glibc used to have:
typedef struct ucontext { ... } ucontext_t;
glibc now has:
typedef struct ucontext_t { ... } ucontext_t;
(See https://sourceware.org/bugzilla/show_bug.cgi?id=21457
for detail and rationale for the glibc change)
However, QEMU used "struct ucontext" in declarations. This is a
private name and compatibility cannot be guaranteed. Switch to
only using the standardized type name.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Message-id: 20170628204452.41230-1-raj.khem@gmail.com
Cc: Kamil Rytarowski <kamil@netbsd.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: Rewrote commit message, based mostly on the one from
Nathaniel McCallum]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gcc 7 is pickier about our sources:
hw/usb/bus.c: In function ‘usb_port_location’:
hw/usb/bus.c:410:66: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 15 [-Werror=format-truncation=]
snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
^~
hw/usb/bus.c:410:9: note: ‘snprintf’ output between 3 and 28 bytes into a destination of size 16
snprintf(downstream->path, sizeof(downstream->path), "%s.%d",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
upstream->path, portnr);
~~~~~~~~~~~~~~~~~~~~~~~
But we know that there are at most 5 levels of USB hubs, with at
most two digits per level; that plus the separating dots means we
use at most 15 bytes (including trailing NUL) of our 16-byte field.
Adding an assertion to show gcc that we checked for truncation is
enough to shut up the false-positive warning.
Inspired by an idea by Dr. David Alan Gilbert <dgilbert@redhat.com>.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170717151334.17954-1-eblake@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>