Fix the example of add qmp hello-world example.
Without ":", make will report error:
../qapi/misc.json:573:2: line should end with ':'
Signed-off-by: Zihao Chang <changzihao1@huawei.com>
Message-Id: <20201201143308.1626-1-changzihao1@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We use x.y most of the time, and x.y.0 sometimes. Normalize for
consistency.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201118064158.3359056-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Change to "expects a THING" where that's an obvious improvement
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-11-armbru@redhat.com>
device-list-properties reports
Parameter 'typename' expects device
when @typename exists, but isn't a TYPE_DEVICE. Improve this to
Parameter 'typename' expects a non-abstract device type
qom-list-properties reports
Parameter 'typename' expects object
when @typename exists, but isn't a TYPE_OBJECT. Improve this to
Parameter 'typename' expects a QOM type
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-10-armbru@redhat.com>
Change
Parameter 'mode' expects halt|powerdown|reboot
to
Parameter 'mode' expects 'halt', 'powerdown', or 'reboot'
for consistency with similar error messages elsewhere.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-9-armbru@redhat.com>
check_suspend_mode()'s error message
Parameter 'mode' expects GuestSuspendMode
makes no sense to users: GuestSuspendMode is a C enum. Fortunately,
it is unreachable. Replace it by abort().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-8-armbru@redhat.com>
client_migrate_info reports spice_server_migrate_connect() failure as
"An undefined error has occurred". Improve to "Could not set up
display for migration".
QERR_UNDEFINED_ERROR is now unused. Drop.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-6-armbru@redhat.com>
set_passwd and expire_password reject invalid "protocol" with "Invalid
parameter 'protocol'". Misleading; the parameter is valid, its value
isn't. Improve to "Parameter 'protocol' expects 'vnc' or 'spice'".
expire_password fails with "Could not set password". Misleading;
improve to "Could not set password expire time".
QERR_SET_PASSWD_FAILED is now unused. Drop.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-5-armbru@redhat.com>
block-commit defaults @base-node to the deepest backing image. When
there is none, it fails with "Base 'NULL' not found". Improve to
"There is no backing image".
block-commit and block-stream reject a @base argument that doesn't
resolve with "Base 'BASE' not found". Commit 6b33f3ae8b "qemu-img:
Improve commit invalid base message" improved this message in
qemu-img. Improve it here, too: "Can't find '%s' in the backing
chain".
QERR_BASE_NOT_FOUND is now unused. Drop.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-4-armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
QERR_INVALID_BLOCK_FORMAT is dead since commit e6641719fe "block:
Always pass NULL as drv for bdrv_open()", 2015-09-14.
QERR_INVALID_PASSWORD is dead since commit c01c214b69 "block: remove
all encryption handling APIs", 2017-07-11.
Bury them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
contrib/plugins/hotblocks.c
contrib/plugins/hotpages.c
contrib/plugins/howvec.c
contrib/plugins/lockstep.c
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/plugin/bb.c
tests/plugin/empty.c
tests/plugin/insn.c
tests/plugin/mem.c
tests/test-rcu-simpleq.c
tests/test-rcu-slist.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not
to include osdep.h intentionally. The remaining reverts are the same
as in commit bbfff19688.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113061216.2483385-1-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
-----BEGIN PGP SIGNATURE-----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=abAb
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20201210' into staging
Aspeed patches :
* New device model for EMC1413/EMC1414 temperature sensors (I2C)
* New g220a-bmc Aspeed machine
* couple of Aspeed cleanups
# gpg: Signature made Thu 10 Dec 2020 11:58:10 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* remotes/legoater/tags/pull-aspeed-20201210:
aspeed: g220a-bmc: Add an FRU
aspeed/smc: Add support for address lane disablement
ast2600: SRAM is 89KB
aspeed: Add support for the g220a-bmc board
hw/misc: add an EMC141{3,4} device model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* hw/arm/smmuv3: Fix up L1STD_SPAN decoding
* xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
* sbsa-ref: allow to use Cortex-A53/57/72 cpus
* Various minor code cleanups
* hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
* Implement more pieces of ARMv8.1M support
-----BEGIN PGP SIGNATURE-----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=wscB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20201210' into staging
target-arm queue:
* hw/arm/smmuv3: Fix up L1STD_SPAN decoding
* xlnx-zynqmp: Support Xilinx ZynqMP CAN controllers
* sbsa-ref: allow to use Cortex-A53/57/72 cpus
* Various minor code cleanups
* hw/intc/armv7m_nvic: Make all of system PPB range be RAZWI/BusFault
* Implement more pieces of ARMv8.1M support
# gpg: Signature made Thu 10 Dec 2020 11:46:43 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20201210: (36 commits)
hw/arm/armv7m: Correct typo in QOM object name
hw/intc/armv7m_nvic: Implement read/write for RAS register block
target/arm: Implement M-profile "minimal RAS implementation"
hw/intc/armv7m_nvic: Fix "return from inactive handler" check
target/arm: Implement CCR_S.TRD behaviour for SG insns
hw/intc/armv7m_nvic: Support v8.1M CCR.TRD bit
target/arm: Implement new v8.1M VLLDM and VLSTM encodings
target/arm: Implement new v8.1M NOCP check for exception return
target/arm: Implement v8.1M REVIDR register
target/arm: In v8.1M, don't set HFSR.FORCED on vector table fetch failures
target/arm: For v8.1M, always clear R0-R3, R12, APSR, EPSR on exception entry
hw/intc/armv7m_nvic: Update FPDSCR masking for v8.1M
target/arm: Implement FPCXT_S fp system register
target/arm: Factor out preserve-fp-state from full_vfp_access_check()
target/arm: Use new FPCR_NZCV_MASK constant
target/arm: Implement M-profile FPSCR_nzcvqc
target/arm: Implement VLDR/VSTR system register
target/arm: Move general-use constant expanders up in translate.c
target/arm: Refactor M-profile VMSR/VMRS handling
target/arm: Enforce M-profile VMRS/VMSR register restrictions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct a typo in the name we give the NVIC object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-28-peter.maydell@linaro.org
The RAS feature has a block of memory-mapped registers at offset
0x5000 within the PPB. For a "minimal RAS" implementation we provide
no error records and so the only registers that exist in the block
are ERRIIDR and ERRDEVID.
The "RAZ/WI for privileged, BusFault for nonprivileged" behaviour
of the "nvic-default" region is actually valid for minimal-RAS,
so the main benefit of providing an explicit implementation of
the register block is more accurate LOG_UNIMP messages, and a
framework for where we could add a real RAS implementation later
if necessary.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-27-peter.maydell@linaro.org
For v8.1M the architecture mandates that CPUs must provide at
least the "minimal RAS implementation" from the Reliability,
Availability and Serviceability extension. This consists of:
* an ESB instruction which is a NOP
-- since it is in the HINT space we need only add a comment
* an RFSR register which will RAZ/WI
* a RAZ/WI AIRCR.IESB bit
-- the code which handles writes to AIRCR does not allow setting
of RES0 bits, so we already treat this as RAZ/WI; add a comment
noting that this is deliberate
* minimal implementation of the RAS register block at 0xe0005000
-- this will be in a subsequent commit
* setting the ID_PFR0.RAS field to 0b0010
-- we will do this when we add the Cortex-M55 CPU model
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-26-peter.maydell@linaro.org
In commit 077d744910 we added code to handle the v8M
requirement that returns from NMI or HardFault forcibly deactivate
those exceptions regardless of what interrupt the guest is trying to
deactivate. Unfortunately this broke the handling of the "illegal
exception return because the returning exception number is not
active" check for those cases. In the pseudocode this test is done
on the exception the guest asks to return from, but because our
implementation was doing this in armv7m_nvic_complete_irq() after the
new "deactivate NMI/HardFault regardless" code we ended up doing the
test on the VecInfo for that exception instead, which usually meant
failing to raise the illegal exception return fault.
In the case for "configurable exception targeting the opposite
security state" we detected the illegal-return case but went ahead
and deactivated the VecInfo anyway, which is wrong because that is
the VecInfo for the other security state.
Rearrange the code so that we first identify the illegal return
cases, then see if we really need to deactivate NMI or HardFault
instead, and finally do the deactivation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-25-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
Add the code in the SG insn implementation for the new behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-24-peter.maydell@linaro.org
v8.1M introduces a new TRD flag in the CCR register, which enables
checking for stack frame integrity signatures on SG instructions.
This bit is not banked, and is always RAZ/WI to Non-secure code.
Adjust the code for handling CCR reads and writes to handle this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-23-peter.maydell@linaro.org
v8.1M adds new encodings of VLLDM and VLSTM (where bit 7 is set).
The only difference is that:
* the old T1 encodings UNDEF if the implementation implements 32
Dregs (this is currently architecturally impossible for M-profile)
* the new T2 encodings have the implementation-defined option to
read from memory (discarding the data) or write UNKNOWN values to
memory for the stack slots that would be D16-D31
We choose not to make those accesses, so for us the two
instructions behave identically assuming they don't UNDEF.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-21-peter.maydell@linaro.org
In v8.1M a new exception return check is added which may cause a NOCP
UsageFault (see rule R_XLTP): before we clear s0..s15 and the FPSCR
we must check whether access to CP10 from the Security state of the
returning exception is disabled; if it is then we must take a fault.
(Note that for our implementation CPPWR is always RAZ/WI and so can
never cause CP10 accesses to fail.)
The other v8.1M change to this register-clearing code is that if MVE
is implemented VPR must also be cleared, so add a TODO comment to
that effect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-20-peter.maydell@linaro.org
In v8.1M a REVIDR register is defined, which is at address 0xe00ecfc
and is a read-only IMPDEF register providing implementation specific
minor revision information, like the v8A REVIDR_EL1. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-19-peter.maydell@linaro.org
In v8.1M, vector table fetch failures don't set HFSR.FORCED (see rule
R_LLRP). (In previous versions of the architecture this was either
required or IMPDEF.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-18-peter.maydell@linaro.org
In v8.0M, on exception entry the registers R0-R3, R12, APSR and EPSR
are zeroed for an exception taken to Non-secure state; for an
exception taken to Secure state they become UNKNOWN, and we chose to
leave them at their previous values.
In v8.1M the behaviour is specified more tightly and these registers
are always zeroed regardless of the security state that the exception
targets (see rule R_KPZV). Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-17-peter.maydell@linaro.org
The FPDSCR register has a similar layout to the FPSCR. In v8.1M it
gains new fields FZ16 (if half-precision floating point is supported)
and LTPSIZE (always reads as 4). Update the reset value and the code
that handles writes to this register accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-16-peter.maydell@linaro.org
Implement the new-in-v8.1M FPCXT_S floating point system register.
This is for saving and restoring the secure floating point context,
and it reads and writes bits [27:0] from the FPSCR and the
CONTROL.SFPA bit in bit [31].
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-14-peter.maydell@linaro.org
Factor out the code which handles M-profile lazy FP state preservation
from full_vfp_access_check(); accesses to the FPCXT_NS register are
a special case which need to do just this part (corresponding in the
pseudocode to the PreserveFPState() function), and not the full
set of actions matching the pseudocode ExecuteFPCheck() which
normal FP instructions need to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201119215617.29887-13-peter.maydell@linaro.org
We defined a constant name for the mask of NZCV bits in the FPCR/FPSCR
in the previous commit; use it in a couple of places in existing code,
where we're masking out everything except NZCV for the "load to Rt=15
sets CPSR.NZCV" special case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-12-peter.maydell@linaro.org
v8.1M defines a new FP system register FPSCR_nzcvqc; this behaves
like the existing FPSCR, except that it reads and writes only bits
[31:27] of the FPSCR (the N, Z, C, V and QC flag bits). (Unlike the
FPSCR, the special case for Rt=15 of writing the CPSR.NZCV is not
permitted.)
Implement the register. Since we don't yet implement MVE, we handle
the QC bit as RES0, with todo comments for where we will need to add
support later.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-11-peter.maydell@linaro.org
Implement the new-in-v8.1M VLDR/VSTR variants which directly
read or write FP system registers to memory.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-10-peter.maydell@linaro.org
The constant-expander functions like negate, plus_2, etc, are
generally useful; move them up in translate.c so we can use them in
the VFP/Neon decoders as well as in the A32/T32/T16 decoders.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-9-peter.maydell@linaro.org
Currently M-profile borrows the A-profile code for VMSR and VMRS
(access to the FP system registers), because all it needs to support
is the FPSCR. In v8.1M things become significantly more complicated
in two ways:
* there are several new FP system registers; some have side effects
on read, and one (FPCXT_NS) needs to avoid the usual
vfp_access_check() and the "only if FPU implemented" check
* all sysregs are now accessible both by VMRS/VMSR (which
reads/writes a general purpose register) and also by VLDR/VSTR
(which reads/writes them directly to memory)
Refactor the structure of how we handle VMSR/VMRS to cope with this:
* keep the M-profile code entirely separate from the A-profile code
* abstract out the "read or write the general purpose register" part
of the code into a loadfn or storefn function pointer, so we can
reuse it for VLDR/VSTR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-8-peter.maydell@linaro.org
For M-profile before v8.1M, the only valid register for VMSR/VMRS is
the FPSCR. We have a comment that states this, but the actual logic
to forbid accesses for any other register value is missing, so we
would end up with A-profile style behaviour. Add the missing check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-7-peter.maydell@linaro.org
In v8.1M the new CLRM instruction allows zeroing an arbitrary set of
the general-purpose registers and APSR. Implement this.
The encoding is a subset of the LDMIA T2 encoding, using what would
be Rn=0b1111 (which UNDEFs for LDMIA).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-6-peter.maydell@linaro.org
Implement the v8.1M VSCCLRM insn, which zeros floating point
registers if there is an active floating point context.
This requires support in write_neon_element32() for the MO_32
element size, so add it.
Because we want to use arm_gen_condlabel(), we need to move
the definition of that function up in translate.c so it is
before the #include of translate-vfp.c.inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-5-peter.maydell@linaro.org
In arm_cpu_realizefn() we check whether the board code disabled EL3
via the has_el3 CPU object property, which we create if the CPU
starts with the ARM_FEATURE_EL3 feature bit. If it is disabled, then
we turn off ARM_FEATURE_EL3 and also zero out the relevant fields in
the ID_PFR1 and ID_AA64PFR0 registers.
This codepath was incorrectly being taken for M-profile CPUs, which
do not have an EL3 and don't set ARM_FEATURE_EL3, but which may have
the M-profile Security extension and so should have non-zero values
in the ID_PFR1.Security field.
Restrict the handling of the feature flag to A/R-profile cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-4-peter.maydell@linaro.org
In v8.1M the PXN architecture extension adds a new PXN bit to the
MPU_RLAR registers, which forbids execution of code in the region
from a privileged mode.
This is another feature which is just in the generic "in v8.1M" set
and has no ID register field indicating its presence.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-3-peter.maydell@linaro.org
For M-profile CPUs, the range from 0xe0000000 to 0xe00fffff is the
Private Peripheral Bus range, which includes all of the memory mapped
devices and registers that are part of the CPU itself, including the
NVIC, systick timer, and debug and trace components like the Data
Watchpoint and Trace unit (DWT). Within this large region, the range
0xe000e000 to 0xe000efff is the System Control Space (NVIC, system
registers, systick) and 0xe002e000 to 0exe002efff is its Non-secure
alias.
The architecture is clear that within the SCS unimplemented registers
should be RES0 for privileged accesses and generate BusFault for
unprivileged accesses, and we currently implement this.
It is less clear about how to handle accesses to unimplemented
regions of the wider PPB. Unprivileged accesses should definitely
cause BusFaults (R_DQQS), but the behaviour of privileged accesses is
not given as a general rule. However, the register definitions of
individual registers for components like the DWT all state that they
are RES0 if the relevant component is not implemented, so the
simplest way to provide that is to provide RAZ/WI for the whole range
for privileged accesses. (The v7M Arm ARM does say that reserved
registers should be UNK/SBZP.)
Expand the container MemoryRegion that the NVIC exposes so that
it covers the whole PPB space. This means:
* moving the address that the ARMV7M device maps it to down by
0xe000 bytes
* moving the off and the offsets within the container of all the
subregions forward by 0xe000 bytes
* adding a new default MemoryRegion that covers the whole container
at a lower priority than anything else and which provides the
RAZWI/BusFault behaviour
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201119215617.29887-2-peter.maydell@linaro.org
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-5-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-4-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-3-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Message-id: 20201126111109.112238-2-alex.chen@huawei.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Dump the collected random data after a randomness test failure.
Note that this relies on the test having called
g_test_set_nonfatal_assertions() so we don't abort immediately on the
assertion failure.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: minor commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Trusted Firmware now supports A72 on sbsa-ref by default [1] so enable
it for QEMU as well. A53 was already enabled there.
1. https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/7117
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201120141705.246690-1-marcin.juszkiewicz@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
Message-id: 1605728926-352690-5-git-send-email-fnu.vikram@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>