Currently the change in cpu_tb_exec is masked by the debug exception
being raised by the translators. But this allows us to remove that code.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Make bytes argument int64_t to be consistent with modern block-layer.
Callers should be OK with it as type becomes wider.
What is inside functions?
- Conversion from int64_t to size_t. Still, we
can't have a buffer larger than SIZE_MAX, therefore bytes should not be
larger than SIZE_MAX as well. Add an assertion.
- Passing to blk_co_pwritev() / blk_co_preadv() which already has
int64_t bytes argument.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
We already have this marker for the blk_co_flush function declaration in
block/block-backend.c. Add it in the header too.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211007175243.642516-1-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: wording tweak]
Signed-off-by: Eric Blake <eblake@redhat.com>
blk_check_bytes_request is called from blk_co_do_preadv,
blk_co_do_pwritev_part, blk_co_do_pdiscard and blk_co_copy_range
before (maybe) calling throttle_group_co_io_limits_intercept() (which
has int64_t argument) and then calling corresponding bdrv_co_ function.
bdrv_co_ functions are OK with int64_t bytes as well.
So dropping the check for INT_MAX we just get same restrictions as in
bdrv_ layer: discard and write-zeroes goes through
bdrv_check_qiov_request() and are allowed to be 64bit. Other requests
go through bdrv_check_request32() and still restricted by INT_MAX
boundary.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-13-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
To be consistent with declarations in include/sysemu/block-backend.h.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-12-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
1. Convert bytes in BlkAioEmAIOCB:
aio->bytes is only passed to already int64_t interfaces, and set in
blk_aio_prwv, which is updated here.
2. For all updated functions the parameter type becomes wider so callers
are safe.
3. In blk_aio_prwv we only store bytes to BlkAioEmAIOCB, which is
updated here.
4. Other updated functions are wrappers on blk_aio_prwv.
Note that blk_aio_preadv and blk_aio_pwritev become safer: before this
commit, it's theoretically possible to pass qiov with size exceeding
INT_MAX, which than converted to int argument of blk_aio_prwv. Now it's
converted to int64_t which is a lot better. Still add assertions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-11-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: tweak assertion and grammar]
Signed-off-by: Eric Blake <eblake@redhat.com>
Function is updated so that parameter type becomes wider, so all
callers should be OK with it.
Look at blk_co_copy_range() itself: bytes is passed only to
blk_check_byte_request() and bdrv_co_copy_range(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-10-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Convert blk_pdiscard, blk_pwrite_compressed, blk_pwrite_zeroes.
These are just wrappers for functions with int64_t argument, so allow
passing int64_t as well. Parameter type becomes wider so all callers
should be OK with it.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Note also that we don't (and are not going to) convert blk_pwrite and
blk_pread: these functions return number of bytes on success, so to
update them, we should change return type to int64_t as well, which
will lead to investigating and updating all callers which is too much.
So, blk_pread and blk_pwrite remain unchanged.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-9-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's drop hand-made coroutine wrappers and use coroutine wrapper
generation like in block/io.c.
Now, blk_foo() functions are written in same way as blk_co_foo() ones,
but wrap blk_do_foo() instead of blk_co_do_foo().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-8-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: spelling fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-7-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This is a preparation to the following commit, to use automatic
coroutine wrapper generation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We updated blk_do_pdiscard() and its wrapper blk_co_pdiscard(). Both
functions are updated so that the parameter type becomes wider, so all
callers should be OK with it.
Look at blk_do_pdiscard(): bytes is passed only to
blk_check_byte_request() and bdrv_co_pdiscard(), which already have
int64_t bytes parameter, so we are OK.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
We convert blk_do_pwritev_part() and some wrappers:
blk_co_pwritev_part(), blk_co_pwritev(), blk_co_pwrite_zeroes().
All functions are converted so that the parameter type becomes wider, so
all callers should be OK with it.
Look at blk_do_pwritev_part() body:
bytes is passed to:
- trace_blk_co_pwritev (we update it here)
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_pwritev_part - all already have int64_t argument.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-4-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
For both updated functions, the type of bytes becomes wider, so all callers
should be OK with it.
blk_co_preadv() only passes its arguments to blk_do_preadv().
blk_do_preadv() passes bytes to:
- trace_blk_co_preadv, which is updated too
- blk_check_byte_request, throttle_group_co_io_limits_intercept,
bdrv_co_preadv, which are already int64_t.
Note that requests exceeding INT_MAX are still restricted by
blk_check_byte_request().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-3-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: grammar tweaks]
Signed-off-by: Eric Blake <eblake@redhat.com>
Rename size and make it int64_t to correspond to modern block layer,
which always uses int64_t for offset and bytes (not in blk layer yet,
which is a task for following commits).
All callers pass int or unsigned int.
So, for bytes in [0, INT_MAX] nothing is changed, for negative bytes we
now fail on "bytes < 0" check instead of "bytes > INT_MAX" check.
Note, that blk_check_byte_request() still doesn't allow requests
exceeding INT_MAX.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211006131718.214235-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
With -m32, size_t is generally only a uint32_t. That makes clang
complain that in the assertion
assert(qiov->size <= INT64_MAX);
the range of the type of qiov->size (size_t) is too small for any of its
values to ever exceed INT64_MAX.
Cast qiov->size to uint64_t to silence clang.
Fixes: f7ef38dd13
("block: use int64_t instead of uint64_t in driver read
handlers")
Signed-off-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20211011155031.149158-1-hreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
-----BEGIN PGP SIGNATURE-----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=fWoj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth/tags/pull-request-2021-10-15' into staging
* Check kernel command line size on s390x
* Simplification of one of the SIGP instructions on s390x
* Cornelia stepping down as maintainer in some subsystems
* Update the dtc submodule to a proper release version
# gpg: Signature made Fri 15 Oct 2021 02:11:13 AM PDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
* remotes/thuth/tags/pull-request-2021-10-15:
dtc: Update to version 1.6.1
s390x virtio-ccw machine: step down as maintainer
s390x/kvm: step down as maintainer
vfio-ccw: step down as maintainer
s390x: sigp: Force Set Architecture to return Invalid Parameter
s390x/ipl: check kernel command line size
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like we already do for -object, introduce support for JSON syntax in
-device, which can be kept stable in the long term and guarantees that a
single code path with identical behaviour is used for both QMP and the
command line. Compared to the QemuOpts based code, the parser contains
less surprises and has support for non-scalar options (lists and
structs). Switching management tools to JSON means that we can more
easily change the "human" CLI syntax from QemuOpts to the keyval parser
later.
In the QAPI schema, a feature flag is added to the device-add command to
allow management tools to detect support for this.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211008133442.141332-16-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QDicts are both what QMP natively uses and what the keyval parser
produces. Going through QemuOpts isn't useful for either one, so switch
the main device creation function to QDicts. By sharing more code with
the -object/object-add code path, we can even reduce the code size a
bit.
This commit doesn't remove the detour through QemuOpts from any code
path yet, but it allows the following commits to do so.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-15-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Don't go through the global QemuOptsList, it is state of the legacy
command line parser and we will create devices that are not contained
in it. It is also just the command line configuration and not
necessarily the current runtime state.
Instead, look at the qdev device tree which has the current state of all
existing devices.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-14-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of accessing the global QemuOptsList, which really belong to the
command line parser and shouldn't be accessed from devices, store a
pointer to the QemuOpts in a new VirtIONet field.
This is not the final state, but just an intermediate step to get rid of
QemuOpts in devices. It will later be replaced with an options QDict.
Before this patch, two "primary" devices could be hidden for the same
standby device, but only one of them would actually be enabled and the
other one would be kept hidden forever, so this doesn't make sense.
After this patch, configuring a second primary device is an error.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-13-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hide_device() is used for virtio-net failover, where the standby virtio
device delays creation of the primary device. It only makes sense to
have a single primary device for each standby device. Adding a second
one should result in an error instead of hiding it and never using it
afterwards.
Prepare for this by adding an Error parameter to the hide_device()
callback where virtio-net is informed about adding a primary device.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-12-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Use QTAILQ_FOREACH_SAFE() so that the current QemuOpts can be deleted
while iterating through the whole list.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-11-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qdev_set_id() is mostly used when the user adds a device (using
-device cli option or device_add qmp command). This commit adds
an error parameter to handle the case where the given id is
already taken.
Also document the function and add a return value in order to
be able to capture success/failure: the function now returns the
id in case of success, or NULL in case of failure.
The commit modifies the 2 calling places (qdev-monitor and
xen-legacy-backend) to add the error object parameter.
Note that the id is, right now, guaranteed to be unique because
all ids came from the "device" QemuOptsList where the id is used
as key. This addition is a preparation for a future commit which
will relax the uniqueness.
Signed-off-by: Damien Hedde <damien.hedde@greensocs.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-10-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
DeviceState.id is a pointer to a string that is stored in the QemuOpts
object DeviceState.opts and freed together with it. We want to create
devices without going through QemuOpts in the future, so make this a
separately allocated string.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-9-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only thing the string visitor adds compared to a keyval visitor is
list support. git grep for 'visit_start_list' and 'visit.*List' shows
that devices don't make use of this.
In a world with a QAPIfied command line interface, the keyval visitor is
used to parse the command line. In order to make sure that no devices
start using this feature that would make backwards compatibility harder,
just switch away from object_property_parse(), which internally uses the
string visitor, to a keyval visitor and object_property_set().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211008133442.141332-8-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The iothread isn't called 'iothread0', but 'thread0'. Depending on the
order that properties are parsed, the error message may change from the
expected one to another one saying that the iothread doesn't exist.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-7-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iothread is a string property, so None (= JSON null) is not a valid
value for it. Pass the empty string instead to get the default iothread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20211008133442.141332-6-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
ERRP_GUARD() makes debugging easier by making sure that &error_abort
still fails at the real origin of the error instead of
error_propagate().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost-vdpa works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-4-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
vhost-user works only with specific devices. At startup, it second
guesses what the command line option handling will do and error out if
it thinks a non-virtio device will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Drop the old checks and implement .check_peer_type() instead to fix
this. As a nice side effect, it also removes one more dependency on the
legacy QemuOpts infrastructure and even reduces the code size.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-3-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Some network backends (vhost-user and vhost-vdpa) work only with
specific devices. At startup, they second guess what the command line
option handling will do and error out if they think a non-virtio device
will attach to them.
This second guessing is not only ugly, it can lead to wrong error
messages ('-device floppy,netdev=foo' should complain about an unknown
property, not about the wrong kind of network device being attached) and
completely ignores hotplugging.
Add a callback where backends can check compatibility with a device when
it actually tries to attach, even on hotplug.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20211008133442.141332-2-kwolf@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Right now meson_options.txt lists about 90 options. Each option
needs code in configure to parse it and pass the option down to Meson as
a -D command-line argument; in addition the default must be duplicated
between configure and meson_options.txt. This series tries to remove
the code duplication by generating the case statement for those --enable
and --disable options, as well as the corresponding help text.
About 80% of the options can be handled completely by the new mechanism.
Eight meson options are not of the --enable/--disable kind. Six more need
to be parsed in configure for various reasons documented in the patch,
but they still have their help automatically generated.
The advantages are:
- less code in configure
- parsing and help is more consistent (for example --enable-blobs was
not supported)
- options are described entirely in one place, meson_options.txt.
This make it more attractive to use Meson options instead of
hand-crafted configure options and config-host.mak
A few options change name: --enable-tcmalloc and --enable-jemalloc
become --enable-malloc={tcmalloc,jemalloc}; --disable-blobs becomes
--disable-install-blobs; --enable-trace-backend becomes
--enable-trace-backends. However, the old names are allowed
for backwards compatibility.
Message-Id: <20211007130829.632254-19-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Manually patch the introspection data to include the tracing backends.
This works around a deficiency in Meson that will be fixed by
https://github.com/mesonbuild/meson/pull/9395.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prepare the configure script and Makefile for automatically generated
help and parsing.
Because we need to run the script to generate the full help, we
cannot rely on the user supplying the path to a Python interpreter
with --python; therefore, the introspection output is parsed into
shell functions and stored in scripts/. The converter is written
in Python as standard for QEMU, and this commit contains a stub.
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Options such as "--enable-capstone=git" do not make much sense when building
from a tarball. Accept "internal" for consistency with the meson options.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The options were deprecated in 6.0. That said, we do not really have a
formal deprecation cycle for build-time changes, since they do not affect
users.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson already has its own logic to find the "ar" binary, so remove the
Solaris specific check.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211007130829.632254-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add meson feature options for Spice and Spice protocol, and move
detection logic out of configure.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007102453.978041-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20211007130829.632254-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This makes the pthreads check dead in configure, so remove it
as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-9-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove some special cases by moving them to Meson.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20211007130829.632254-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>