Add a couple of tests on the XSCOM bus of the PowerNV machine for the
the POWER8 and POWER9 CPUs. The first tests reads the CFAM identifier
of the chip. The second test goes further in the XSCOM address space
and reaches the cores to read their DTS registers.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[dwg: Fixed an incorrect indentation, and a Makefile problem]]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the pnv machine type is compiled on a 32-bit host, the unsigned long
(host) type is 32-bit. This means that the hweight_long() used to
calculate the number of allowed cores only considers the low 32 bits of
the cores_mask variable, and can thus return 0 in some circumstances.
This corrects the bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: Richard Henderson <rth@twiddle.net>
[clg: replaced hweight_long() by ctpop64() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
High addresses can overflow the uint32_t pcba variable after the 8byte
shift.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XSCOM addresses for the core registers are encoded in a slightly
different way on POWER8 and POWER9.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When using the serial console in the GTK interface of QEMU (and
QEMU has been compiled with CONFIG_VTE), it is possible to trigger
the assert() statement in vty_receive() in spapr_vty.c by pasting
a chunk of text with length > 16 into the QEMU window.
Most of the other serial backends seem to simply drop characters
that they can not handle, so I think we should also do the same in
spapr-vty to fix this issue.
Buglink: https://bugs.launchpad.net/qemu/+bug/1639322
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As per the ISA we need a cause and executing a tabort r9 in libc
for example causes a EXCP_FU exception, we don't wire up the
IC (cause) when we post the exception. The cause is required
for the kernel to do the right thing. The fix applies only to 64
bit ppc targets.
Signed-off-by: Balbir singh <bsingharora@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
daa2369 "spapr_pci: Add a 64-bit MMIO window" subtly broke migration from
qemu-2.7 to the current version. It split the device's MMIO window into
two pieces for 32-bit and 64-bit MMIO.
The patch included backwards compatibility code to convert the old property
into the new format. However, the property value was also transferred in
the migration stream and compared with a (probably unwise) VMSTATE_EQUAL.
So, the "raw" value from 2.7 is compared to the new style converted value
from (pre-)2.8 giving a mismatch and migration failure.
Although it would be technically possible to fix this in a way allowing
backwards migration, that would leave an ugly legacy around indefinitely.
This patch takes the simpler approach of bumping the migration version,
dropping the unwise VMSTATE_EQUAL (and some equally unwise ones around it)
and ignoring them on an incoming migration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
bcdctz. converts from BCD to Zoned numeric format. Zoned format uses
a byte to represent a digit where the most significant nibble is 0x3
or 0xf, depending on the preferred signal.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdcfz. converts from Zoned numeric format to BCD. Zoned format uses
a byte to represent a digit where the most significant nibble is 0x3
or 0xf, depending on the preferred signal.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdctn. converts from BCD to National numeric format. National format
uses a byte to represent a digit where the most significant nibble is
always 0x3 and the least sign. nibbles is the digit itself.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
bcdcfn. converts from National numeric format to BCD. National format
uses a byte to represent a digit where the most significant nibble is
always 0x3 and the least sign. nibbles is the digit itself.
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The CPU model table includes stub (commented out) definitions for
CPU_POWERPC_POWER6_5 and CPU_POWERPC_POWER6A. These are not real cpu
models, but represent the POWER6 in some compatiblity modes. If we ever
do implement POWER6 (unlikely), we'll implement its compatibility modes in
a different way (similar to what we do for POWER7 and POWER8). So these
stub definitions can be removed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
PnvChip is defined twice and this can confuse old compilers :
CC ppc64-softmmu/hw/ppc/pnv_xscom.o
In file included from qemu.git/hw/ppc/pnv.c:29:
qemu.git/include/hw/ppc/pnv.h:60: error: redefinition of typedef ‘PnvChip’
qemu.git/include/hw/ppc/pnv_xscom.h:24: note: previous declaration of ‘PnvChip’ was here
make[1]: *** [hw/ppc/pnv.o] Error 1
make[1]: *** Waiting for unfinished jobs....
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
powernv has some code (derived from the spapr equivalent) used in device
tree generation which depends on the CPU's compatibility mode / logical
PVR. However, compatibility modes don't make sense on powernv - at least
not as a property controlled by the host - because the guest in powernv
has full hypervisor level access to the virtual system, and so owns the
PCR (Processor Compatibility Register) which implements compatiblity modes.
Note: the new logic doesn't take into account kvmppc_smt_threads() like the
old version did. However, if core->nr_threads exceeds kvmppc_smt_threads()
then things will already be broken and clamping the value in the device
tree isn't going to save us.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add following POWER ISA 3.0 instructions.
vprtybw: Vector Parity Byte Word
vprtybd: Vector Parity Byte Double Word
vprtybq: Vector Parity Byte Quad Word
Signed-off-by: Ankit Kumar <ankit@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vrldnm: Vector Rotate Left Doubleword then AND with Mask
vrlwnm: Vector Rotate Left Word then AND with Mask
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vrldmi: Vector Rotate Left Dword then Mask Insert
vrlwmi: Vector Rotate Left Word then Mask Insert
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
( use extract[32,64] and rol[32,64], introduce mask helpers in
internal.h )
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All the variants for rol/ror have a bug in case where the shift == 0.
For example rol32, would generate:
return (word << 0) | (word >> 32);
Which though works, would be flagged as a runtime error on clang's
sanitizer.
Suggested-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Test QMP events for a CDROM device with or without a media inserted,
including both guest-initiated and hw-initiated eject/load requests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-7-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Required for tray tests once a medium may have changed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-6-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
(1) Add START_STOP_UNIT command to ahci-test suite
(2) Add eject/start macro commands; this is not a data transfer
command so it is not well-served by the existing generic pipeline.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-5-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Sometimes we know we'll get back an error, so let's have the
test framework understand that.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-4-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Wait for an event, but return a copy so we can investigate parameters.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-3-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
blk_eject is only used by scsi-disk and atapi, and in both cases we
only attempt to invoke blk_eject if we have a bona-fide change in
tray state.
The "issue" here is that the tray state does not generate a QMP event
unless there is a medium/BDS attached to the device, so if libvirt et al
are waiting for a tray event to occur from an empty-but-closed drive,
software opening that drive will not emit an event and libvirt will
wait forever.
Change this by modifying blk_eject to always emit an event, instead of
conditionally on a "real" backend eject.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1373264
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1478553214-497-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Commit 9ef2e93f introduced the concept of tagging ATAPI commands as
NONDATA, but this introduced a regression for certain commands better
described as CONDDATA. read_cd is such a command that both requires
a non-zero BCL if a transfer size is set, but is perfectly content to
accept a zero BCL if the transfer size is 0.
This test adds a regression test for the case where BCL and nb_sectors
are both 0.
Flesh out the CDROM tests by:
(1) Allowing the test to specify a BCL
(2) Allowing the buffer comparison test to compare a 0-size buffer
(3) Fix the BCL specification in libqos (It is LE, not BE)
(4) Add a nice human-readable message for future SCSI command additions
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-4-git-send-email-jsnow@redhat.com
[Line length edit --js]
Signed-off-by: John Snow <jsnow@redhat.com>
These can simply be the size of the number of sectors we're reading,
plus one for a buffer. We don't need them to be any larger.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-3-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
For the purposes of byte_count_limit verification, add a new flag that
identifies read_cd as sometimes returning data, then check the BCL in
its command handler after we know that it will indeed return data.
Reported-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1477970211-25754-2-git-send-email-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
It is too confusing because it sounds like a BDRVRawState variable.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1477565117-17230-1-git-send-email-famz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, we only use -machine accel=qtest when qemu is invoked through
the common.qemu functions. However, we always want to use it, so move it
from common.qemu directly into QEMU_OPTIONS.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161017183917.8837-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Some block drivers may not be loaded yet, but qemu supports them
nonetheless. bdrv_iterate_format() should report them, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_iterate_format() did not actually sort the formats by name but by
"pointer interpreted as string". That is probably not what we intended
to do, so fix it (by changing qsort_strcmp() so it matches the example
from qsort()'s manual page).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20161012204907.25941-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
It was from the time when none of the global functions had a qcow2_
prefix.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We make sure that the size is aligned to sector length to prevent any
round ups. Otherwise we could end up reading/writing data outside the
area specified by user. This is only needed when user supplies the size
option to avoid any surprises. It is not necessary when only offset is
set.
More over, the check made it difficult to use the offset option without
size option. The check puts unneeded restriction on the offset which had
to be aligned too. Because bdrv_getlength() returns aligned value having
unaligned offset would make the check fail.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When only offset is specified but no size and the offset is greater than
the real size of the containing device an overflow occurs when parsing
the options. This overflow is harmless because we do check for this
exact situation little bit later, but it leads to an error message with
weird values. It is better to do the check is sooner and prevent the
overflow.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A job ID is always required in order to create a block job on a
non-root node. The default ID (obtained with bdrv_get_device_name())
is otherwise empty in this scenario and the job cannot be created.
The HMP block_stream command doesn't set a job ID and therefore it
doesn't allow streaming to intermediate nodes. One solution is to add
an extra parameter to set a job ID. The other solution is to simply
use the node name passed to block_stream as job ID. This won't work
if it's automatically generated (because it contains a '#') but is
otherwise simple enough for all other cases.
This way 'block_stream node3' will create a job with the ID 'node3'
and the good old 'block_stream virtio0' will keep the previous
behaviour and use 'virtio0' for the job ID.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch drops the unused parameter "BDRVSSHState" being passed into
the ssh_config() function and does code cleanup. The unused parameter
was introduced by the commit c322712.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch frees the leaked visitor in nbd_refresh_filename() and uses
visit_free() to fix it. The leak was introduced by the commit 491d6c7.
Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are only very old and orphaned stable branches listed
in the MAINTAINERS file - so this section is pretty useless
nowadays. Let's remove it.
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These files are currently unmaintained.
I'm proposing that Fam and I co-maintain them; under the model that
whomever between us isn't authoring a given series will be responsible
for reviewing it.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Fam Zheng <famz@redhat.com>
Acked-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
I recently added new files to the source tree that are not
covered by any maintainer yet -- and since every new source
file should have a maintainer nowadays, I volunteer to look
after these files now, too.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
disas/m68k.c obviously belong to the m68k CPU section in
the MAINTAINERS file, but remove the hw/m68k/ directory
here since it only contains machine (not CPU) related
files, as requested by Laurent. Add the machine related
files to the right machine sections instead.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>