The cpu is allowed to require stricter alignment on these 8- and 16-byte
operations, and the OS is required to fix up the accesses as necessary,
so the previous code was not wrong.
However, we can easily handle this misalignment for all direct 8-byte
operations and for direct 16-byte loads.
We must retain 16-byte alignment for 16-byte stores, so that we don't have
to probe for writability of a second page before performing the first of
two 8-byte stores. We also retain 8-byte alignment for no-fault loads,
since they are rare and it's not worth extending the helpers for this.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
At the same time, fix a problem with stqf_asi, when
a write might access two pages.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that we never call out to helpers when direct accesses can
handle an asi, remove the corresponding code in those helpers.
For ldda, this removes the entire helper.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As used by HelenOS, presumably for ultra 2 and 3,
prior to the sun4v platform and the current twinx names.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
It's handy to have a mmu idx for physical addresses, so
that mmu disabled and physical access asis can use the
same path as normal accesses.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Several helpers call helper_raise_exception directly, which requires
in turn that their callers have performed save_state. The new function
allows a TCG return address to be passed in so that we can restore
PC + NPC + flags data from that.
This fixes a bug in the usage of helper_check_align, whose callers had
not been calling save_state. It fixes another bug in which the divide
helpers used GETPC at a level other than the direct callee from TCG.
This allows the translator to avoid save_state prior to SAVE, RESTORE,
and FLUSHW instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This allows us to enforce 16 and 64-byte alignment
without any extra overhead.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <1466744068-6615-1-git-send-email-rth@twiddle.net>
* Fix reset GPIO handling for spitz, tosa boards
* virt: add 'pmu' property for configuring whether to expose the
vPMU to the guest
* char: cadence: correct reset value for baud rate registers
* versatilepb: do not run if user asks for more than 256MB RAM
* pxa2xx: Set value default values for CCCR and CKEN on PXA255
* arm: cubieboard: Add support for initrd
* i.MX: Fix GPIO ISR register write
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IcQM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20161028' into staging
target-arm queue:
* Fix reset GPIO handling for spitz, tosa boards
* virt: add 'pmu' property for configuring whether to expose the
vPMU to the guest
* char: cadence: correct reset value for baud rate registers
* versatilepb: do not run if user asks for more than 256MB RAM
* pxa2xx: Set value default values for CCCR and CKEN on PXA255
* arm: cubieboard: Add support for initrd
* i.MX: Fix GPIO ISR register write
# gpg: Signature made Fri 28 Oct 2016 15:56:56 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20161028:
hw/arm/tosa: Fix reset handling
hw/arm/spitz: Fix reset handling
arm: virt: add PMU property to mach-virt machine type
arm: Add an option to turn on/off vPMU support
char: cadence: correct reset value for baud rate registers
versatilepb: do not run if user asks for more than 256MB RAM
hw/arm/pxa2xx: Set value default values for CCCR and CKEN on PXA255
arm: cubieboard: Add support for initrd
i.MX: Fix GPIO ISR register write
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Version: GnuPG v2
iQEcBAABCAAGBQJYE2ULAAoJEMo1YkxqkXHGvvAH/iDPIAiwBXbndL3KhQTneSHn
ctd4I3VK1/VVTIBRJIetqETiWiAm/WoRhI9kBc/NrQxBFx3ko+fpSYFS2t6lJYnV
EX0vjTKjFhr05tOTQDH/SQtHdU5x/x2M8SsxqrCcTyLm5VDfdPeBlMBfSNMj/L2K
bwinANVEwr6LOM0h8weQ0SvOCa5MLII2p5ufGwKQmhUY5tgZvFlyPa+quDVisKoE
7CpLwWHmUQSNxUXSaru90osUJyk90wCcYxPpJN3YO1MHvpH4kG8DpZ8bnFqLAoNw
zkRdqIrlfntD+mKDqRU1y0GXxu9I4VK1UDcQyRFoSdMi2oHR+L018sQEjCYTAXo=
=n+CF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/famz/tags/for-upstream' into staging
# gpg: Signature made Fri 28 Oct 2016 15:47:39 BST
# gpg: using RSA key 0xCA35624C6A9171C6
# gpg: Good signature from "Fam Zheng <famz@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6
* remotes/famz/tags/for-upstream:
aio: convert from RFifoLock to QemuRecMutex
qemu-thread: introduce QemuRecMutex
iothread: release AioContext around aio_poll
block: only call aio_poll on the current thread's AioContext
qemu-img: call aio_context_acquire/release around block job
qemu-io: acquire AioContext
block: prepare bdrv_reopen_multiple to release AioContext
replication: pass BlockDriverState to reopen_backing_file
iothread: detach all block devices before stopping them
aio: introduce qemu_get_current_aio_context
sheepdog: use BDRV_POLL_WHILE
nfs: use BDRV_POLL_WHILE
nfs: move nfs_set_events out of the while loops
block: introduce BDRV_POLL_WHILE
qed: Implement .bdrv_drain
block: change drain to look only at one child at a time
block: add BDS field to count in-flight requests
mirror: use bdrv_drained_begin/bdrv_drained_end
blockjob: introduce .drain callback for jobs
replication: interrupt failover if the main device is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It seems there is a limit to the number of arguments a UST trace event
can take and at 11 the previous trace command broke the build. Split the
trace into a src pkt and dst pkt trace to fix this.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20161028132559.8324-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=3Z5V
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.8-20161028' into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for tosa to reset the entire system
and not just the CPU.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-2-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using the CPU reset handler for resets triggered by writing into
gpio pins other than GPIO01 is not appropriate and does not work,
since the reset triggered by writing into GPIO01 is configurable.
Use a separate reset handler for spitz to reset the entire system
and not just the CPU.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477597646-24111-1-git-send-email-linux@roeck-us.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CPU vPMU is now turned ON by default, but this feature wasn't introduced
until virt-2.7 machine type. To solve this problem, this patch adds a
PMU option in machine state, which is used to control CPU's vPMU status.
This PMU option is not exposed to command line and is turned off in
virt-2.6 machine type.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1477463301-17175-3-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds a pmu=[on/off] option to enable/disable vPMU support
in guest vCPU. It allows virt tools, such as libvirt, to determine the
exsitence of vPMU and configure it. Note this option is only available
for cortex-a57/cortex-53/ host CPUs, but unavailable on ARMv7 and other
processors. Also even though "pmu=" option is available for TCG mode,
setting it doesn't turn PMU on.
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1477463301-17175-2-git-send-email-wei@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cadence UART device emulator stores 'baud rate generator'
and 'baud rate divider' values, used in computing speed, in two
registers. The device specification defines their range and
their reset value. Use their correct value when resetting the
device in cadence_uart_reset.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1477378140-2670-1-git-send-email-ppandit@redhat.com
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The versatilepb physical address space layout only has
a 256MB region for RAM before the devices. Without a guard
on the amount of RAM requested by the user we would happily
create a RAM area that overlapped with the devices, resulting
in very confusing behaviour (typically a guest crash).
Report the problem to the user if they try to request more
RAM than the board can handle (as we do already for some
other board models).
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: 20161025093711.17407-1-jcd@tribudubois.net
[PMM: tidied up commit message, comments. Use error_report()
rather than fprintf(stderr, ...).]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The code used default values for PXA270 to configure CCCR. For PXA255,
the resulting register value is invalid (unsupported) and resulted
in a division by zero in the Linux kernel. Use default values from
datasheet instead.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361273-18888-1-git-send-email-linux@roeck-us.net
[PMM: fixed tabs-vs-spaces nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Writing the ISR register is supposed to clear interrupt status bits,
not to set them.
This patch makes '-M sabrelite' work without devicetree changes (Linux
kernel versions 3.18 to 4.7 with imx_v6_v7_defconfig and up to v4.8 with
multi_v7_defconfig; mainline has different problems).
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 1477361005-18646-1-git-send-email-linux@roeck-us.net
Acked-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=gsxL
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/berrange/tags/pull-qio-2016-10-27-1' into staging
Merge qio 2016/10/27 v1
# gpg: Signature made Thu 27 Oct 2016 13:54:03 BST
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* remotes/berrange/tags/pull-qio-2016-10-27-1:
main: set names for main loop sources created
vnc: set name for all I/O channels created
migration: set name for all I/O channels created
char: set name for all I/O channels created
nbd: set name for all I/O channels created
io: add ability to set a name for IO channels
io: Add a QIOChannelSocket cleanup test
io: set LISTEN flag explicitly for listen sockets
io: Introduce a qio_channel_set_feature() helper
io: Use qio_channel_has_feature() where applicable
io: Fix double shift usages on QIOChannel features
Conflicts:
qemu-char.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is simpler and a bit faster, and QEMU does not need the contention
callbacks (and thus the fairness) anymore.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-21-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
GRecMutex is new in glib 2.32, so we cannot use it. Introduce
a recursive mutex in qemu-thread instead, which will be used
instead of RFifoLock.
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-20-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is the first step towards having fine-grained critical sections in
dataplane threads, which will resolve lock ordering problems between
address_space_* functions (which need the BQL when doing MMIO, even
after we complete RCU-based dispatch) and the AioContext.
Because AioContext does not use contention callbacks anymore, the
unit test has to be changed.
Previously applied as a0710f7995 and
then reverted.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-19-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
aio_poll is not thread safe; for example bdrv_drain can hang if
the last in-flight I/O operation is completed in the I/O thread after
the main thread has checked bs->in_flight.
The bug remains latent as long as all of it is called within
aio_context_acquire/aio_context_release, but this will change soon.
To fix this, if bdrv_drain is called from outside the I/O thread,
signal the main AioContext through a dummy bottom half. The event
loop then only runs in the I/O thread.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-18-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be needed by bdrv_reopen_multiple, which calls
bdrv_drain_all and thus will *release* the AioContext.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-17-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
After the next patch bdrv_drain_all will have to be called without holding any
AioContext. Prepare to do this by adding an AioContext argument to
bdrv_reopen_multiple.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-15-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be needed in the next patch to retrieve the AioContext.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-14-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Soon bdrv_drain will not call aio_poll itself on iothreads. If block
devices are left hanging off the iothread's AioContext, there will be no
one to do I/O for those poor devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-13-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain)
to choose how to wait for I/O completion.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is important when the sheepdog driver works on a BlockDriverState
that is attached to an I/O thread other than the main thread.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-11-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This will make it possible to use nfs_get_allocated_file_size on
a file that is not in the main AioContext.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-10-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
nfs_set_events only needs to be called once before entering the
while loop; afterwards, nfs_process_read and nfs_process_write
take care of it.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-9-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
We want the BDS event loop to run exclusively in the iothread that
owns the BDS's AioContext. This macro will provide the synchronization
between the two event loops; for now it just wraps the common idiom
of a while loop around aio_poll.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-8-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
The "need_check_timer" is used to clear the "NEED_CHECK" flag in the
image header after a grace period once metadata update has finished. To
comply with the bdrv_drain semantics, we should make sure it remains
deleted once .bdrv_drain is called.
The change to qed_need_check_timer_cb is needed because bdrv_qed_drain
is called after s->bs has been drained, and should not operate on it;
instead it should operate on the BdrvChild-ren exclusively. Doing so
is easy because QED does not have a bdrv_co_flush_to_os callback, hence
all that is needed to flush it is to ensure writes have reached the disk.
Based on commit df9a681dc9 (which however included some unrelated
hunks, possibly due to a merge failure or an overlooked squash).
The patch was reverted because at the time bdrv_qed_drain could call
qed_plug_allocating_write_reqs while an allocating write was queued.
This however is not possible anymore after the previous patch;
.bdrv_drain is only called after all writes have completed at the
QED level, and its purpose is to trigger metadata writes in bs->file.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1477565348-5458-7-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
bdrv_requests_pending is checking children to also wait until internal
requests (such as metadata writes) have completed. However, checking
children is in general overkill. Children requests can be of two kinds:
- requests caused by an operation on bs, e.g. a bdrv_aio_write to bs
causing a write to bs->file->bs. In this case, the parent's in_flight
count will always be incremented by at least one for every request in
the child.
- asynchronous metadata writes or flushes. Such writes can be started
even if bs's in_flight count is zero, but not after the .bdrv_drain
callback has been invoked.
This patch therefore changes bdrv_drain to finish I/O in the parent
(after which the parent's in_flight will be locked to zero), call
bdrv_drain (after which the parent will not generate I/O on the child
anymore), and then wait for internal I/O in the children to complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-6-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Unlike tracked_requests, this field also counts throttled requests,
and remains non-zero if an AIO operation needs a BH to be "really"
completed.
With this change, it is no longer necessary to have a dummy
BdrvTrackedRequest for requests that are never serialising, and
it is no longer necessary to poll the AioContext once after
bdrv_requests_pending(bs) returns false.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-5-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Ensure that there are no changes between the last check to
bdrv_get_dirty_count and the switch to the target.
There is already a bdrv_drained_end call, we only need to ensure
that bdrv_drained_begin is not called twice.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-4-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
This is required to decouple block jobs from running in an
AioContext. With multiqueue block devices, a BlockDriverState
does not really belong to a single AioContext.
The solution is to first wait until all I/O operations are
complete; then loop in the main thread for the block job to
complete entirely.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-3-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Without this change, there is a race condition in tests/test-replication.
Depending on how fast the failover job (active commit) runs, there is a
chance of two bad things happening:
1) replication_done can be called after the secondary has been closed
and hence when the BDRVReplicationState is not valid anymore.
2) two copies of the active disk are present during the
/replication/secondary/stop test (that test runs immediately after
/replication/secondary/start, which tests failover). This causes the
corruption detector to fire.
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1477565348-5458-2-git-send-email-pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>