On systems where SEEK_HOLE in a trailing hole seeks to EOF (Solaris,
but not Linux), try_seek_hole() reports trailing data instead.
Additionally, unlikely lseek() failures are treated badly:
* When SEEK_HOLE fails, try_seek_hole() reports trailing data. For
-ENXIO, there's in fact a trailing hole. Can happen only when
something truncated the file since we opened it.
* When SEEK_HOLE succeeds, SEEK_DATA fails, and SEEK_END succeeds,
then try_seek_hole() reports a trailing hole. This is okay only
when SEEK_DATA failed with -ENXIO (which means the non-trailing hole
found by SEEK_HOLE has since become trailing somehow). For other
failures (unlikely), it's wrong.
* When SEEK_HOLE succeeds, SEEK_DATA fails, SEEK_END fails (unlikely),
then try_seek_hole() reports bogus data [-1,start), which its caller
raw_co_get_block_status() turns into zero sectors of data. Could
theoretically lead to infinite loops in code that attempts to scan
data vs. hole forward.
Rewrite from scratch, with very careful comments.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Commit 5500316 (May 2012) implemented raw_co_is_allocated() as
follows:
1. If defined(CONFIG_FIEMAP), use the FS_IOC_FIEMAP ioctl
2. Else if defined(SEEK_HOLE) && defined(SEEK_DATA), use lseek()
3. Else pretend there are no holes
Later on, raw_co_is_allocated() was generalized to
raw_co_get_block_status().
Commit 4f11aa8 (May 2014) changed it to try the three methods in order
until success, because "there may be implementations which support
[SEEK_HOLE/SEEK_DATA] but not [FIEMAP] (e.g., NFSv4.2) as well as vice
versa."
Unfortunately, we used FIEMAP incorrectly: we lacked FIEMAP_FLAG_SYNC.
Commit 38c4d0a (Sep 2014) added it. Because that's a significant
speed hit, the next commit 7c159037 put SEEK_HOLE/SEEK_DATA first.
As you see, the obvious use of FIEMAP is wrong, and the correct use is
slow. I guess this puts it somewhere between -7 "The obvious use is
wrong" and -10 "It's impossible to get right" on Rusty Russel's Hard
to Misuse scale[*].
"Fortunately", the FIEMAP code is used only when
* SEEK_HOLE/SEEK_DATA aren't defined, but CONFIG_FIEMAP is
Uncommon. SEEK_HOLE had no XFS implementation between 2011 (when it
was introduced for ext4 and btrfs) and 2012.
* SEEK_HOLE/SEEK_DATA and CONFIG_FIEMAP are defined, but lseek() fails
Unlikely.
Thus, the FIEMAP code executes rarely. Makes it a nice hidey-hole for
bugs. Worse, bugs hiding there can theoretically bite even on a host
that has SEEK_HOLE/SEEK_DATA.
I don't want to worry about this crap, not even theoretically. Get
rid of it.
[*] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Missed in commit 705be72.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch fixes two issues with persistent grants and the disk PV backend
(Qdisk):
- Keep track of memory regions where persistent grants have been mapped
since we need to unmap them as a whole. It is not possible to unmap a
single grant if it has been batch-mapped. A new check has also been added
to make sure persistent grants are only used if the whole mapped region
can be persistently mapped in the batch_maps case.
- Unmap persistent grants before switching to the closed state, so the
frontend can also free them.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reported-by: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
If user starts QEMU with "-machine pc,accel=xen", then
compat property in xenfv won't work and it would cause error:
"Unsupported bus. Bus doesn't have property 'acpi-pcihp-bsel' set"
when PCI device is added with -device on QEMU CLI.
From: Igor Mammedov <imammedo@redhat.com>
In case of Xen instead of using compat property, just use the fact
that xen doesn't use QEMU's fw_cfg/acpi tables to switch piix4_pm
into legacy PCI hotplug mode when Xen is enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Li Liang <liang.z.li@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
When extent types don't match, we return -ENOTSUP. In this case, be
polite to the caller and don't modify bdi.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1415938161-16217-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In bdrv_rw_co we report -EINVAL for nb_sectors > INT_MAX /
BDRV_SECTOR_SIZE, so a caller shouldn't exceed it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1415603264-21497-1-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In order to make handle_cmd more readable at the macro level,
the details of how to decompose particular types of FIS packets
are left to helper functions.
In our case, the only type of FIS packet we currently expect to
see is a Register H2D FIS packet, but the gory details of its
decomposition are of no particular interest in handle_cmd.
This patch keeps the receipt of FIS packets and the decomposition
thereof separated to two different functions.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Instead of checking for a known byte, inspect the
fields of this byte explicitly to produce more meaningful
error messages and improve the readability of this section.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Error checking in ahci's handle_cmd is re-ordered so that we
initialize as few things as possible before we've done our
sanity checking. This simplifies returning from this call
in case of an error.
A check to make sure the DMA memory map succeeds with the
correct size is also added, and the debug print of the
command fis is cleaned up with its size corrected.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch introduces a few changes to how FIS packets are
deciphered in the AHCI virtual device. The summary of
changes can be grouped into two pieces:
[A] Changes to how we apply a preliminary sieve to FISes,
[B] Changes in how we internalize a decomposed FIS.
== Changes to how we apply a preliminary sieve to FISes ==
(1) Packets may now either update the Control register or
the Command register, but not both. This is according
to the SATA 3.2 specification which states:
"...the device either initiates processing of the command
indicated in the Command register or initiates processing
of the control request indicated [...] depending on the
state of the C bit in the FIS."
See SATA 3.2 section 10.5.5.4, "Reception" in the 10.5.5
"Register Host to Device FIS" section.
This change accounts for the first two regions of change
within the diff. All other changes belong to the following
changes.
== Changes in how we internalize a decomposed FIS ==
(2) Instead of trying to extract the sector number out of the
FIS from bytes 4-10 and setting it with ide_set_sector,
we set the appropriate IDEState registers and trust that
ide_get_sector can retrieve the correct sector later.
By "constructing" the sector for use with ide_set_sector,
we are duplicating the mechanisms of ide_get_sector.
This change makes the FIS decomposition more obvious.
SATA 3.2 as a specification does not make the legacy
register mapping with respect to the D2H FIS obvious.
However, SATA 3.2 section 10.5.5.1 "Register Host to
Device FIS layout" describes all of the "cmd_fis"
bytes:
0 - FIS Type (0x27)
1 - Port Multiplier Port and Command Update flag
2 - ATA Command
3 - Features_Low
4 - LBA 7:0
5 - LBA 15:8
6 - LBA 23:16
7 - Device, AKA "Drive Select."
8 - LBA 31:24
9 - LBA 39:32
10 - LBA 47:40
11 - Features_High
12 - Count Low
13 - Count High
14 - ICC
15 - Control
16-19 - Auxiliary (for NCQ, defined per-command)
Most of these registers map to existing IDEState registers
in obvious ways, especially features, select, hob_features,
and nsector (count). ICC is reserved in older specifications
but is not supported in our implementation, and remains
unused here. The Control register is not valid for a command
that is trying to update the command register and is to be
considered reserved at this point.
What is not obvious is the LBA register mappings, but SATA 1.0
can help inform of us legacy device support, see SATA 1.0 section
8.5.2 "Register - Host to Device."
LBA 7:0 - Sector Number (sector)
LBA 15:8 - Cyl Low (lcyl)
LBA 23:16 - Cyl High (hcyl)
LBA 31:24 - Sector Num Exp. (hob_sector)
LBA 39:32 - Cyl Low Exp. (hob_lcyl)
LBA 47:40 - Cyl High Exp. (hob_hcyl)
These mappings help guide which registers the FIS should be decomposed
into/towards for CHS, LBA28 and LBA48 commands.
As a note: The prior confusion that can be seen in the documentation
arises from the fact that CHS and LBA28 commands use the low nybble
of the drive select register to store LBA 27:24, whereas LNA48 commands
use the hob_sector, hob_lcyl and hob_hcyl registers as explained above.
The decomposition as it stands now will correctly decompose CHS, LBA28
and LBA48 commands into their appropriate registers where the core
IDE/ATAPI layers can deal with them correctly.
See the below point for more information.
(3) We save cmd_fis[7] as ide_state->select, which informs
decisions about if we are using LBA or CHS.
This corrects a bug in AHCI wherein we attempt to set and/or
retrieve the sector number by using ide_set_sector and
ide_get_sector, which depend on the select register to
determine if we are using LBA or CHS.
Without this adjustment, LBA48 read/writes are currently
broken. Thanks to Eniac Zheng @ HP for pointing this out.
(4) Save cmd_fis[11] as ide_state->hob_feature, as defined in SATA 3.2.
(5) For several ATA commands, the sector count register set to 0
is a magic number that means 256 sectors. For LBA48 commands,
this means 65,536 sectors. We drop the magic sector correction
here, and trust the ide core layer to handle the conversion
appropriately, in ide_cmd_lba48_transform(). As it stands,
the current AHCI code is only compliant with LBA28 commands.
By simply removing the magic, it will work with LBA28 and LBA48.
(6) We expand FIS decomposition to include both ATAPI and IDE devices.
We leave the logic of determining if the fields are valid or not
to the respective layers.
This change intends to make it clearer that AHCI is only a
composition mechanism for the FIS packets: the meanings of
the registers is best left to the implementation layers for
those devices.
(7) Forcefully setting the feature, hcyl and lcyl registers for ATAPI
commands is removed.
- The hcyl and lcyl magic present here is valid at boot only,
and should not be overridden for every PACKET command.
- The feature register is defined as valid for the PACKET command,
so we should not suppress it. The ATAPI layer does not even
currently depend on or require 0x01 as mandatory.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A small helper to determine which S/ATA commands
are destined to be routed to the NCQ pathways.
This references SATA 3.2 section 13.6,
Native Command Queueing. See sections 13.6.4,
13.6.5, 13.6.6, 13.6.7 and 13.6.8 for all
SATA commands considered to be part of the
NCQ feature set. This is summarized in a small
list in section 13.6.3.1 and again in 13.6.3.2.
Not all of these NCQ commands are currently supported,
so the error pathways are adjusted slightly to be more
informative in the case they are encountered.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1415058979-16604-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This impacts both BMDMA and AHCI HBA interfaces for IDE.
Currently, we confuse the difference between a PRDT having
"0 bytes" and a PRDT having "0 complete sectors."
When we receive an incomplete sector, inconsistent error checking
leads to an infinite loop wherein the call succeeds, but it
didn't give us enough bytes -- leading us to re-call the
DMA chain over and over again. This leads to, in the BMDMA case,
leaked memory for short PRDTs, and infinite loops and resource
usage in the AHCI case.
The .prepare_buf() callback is reworked to return the number of
bytes that it successfully prepared. 0 is a valid, non-error
answer that means the table was empty and described no bytes.
-1 indicates an error.
Our current implementation uses the io_buffer in IDEState to
ultimately describe the size of a prepared scatter-gather list.
Even though the AHCI PRDT/SGList can be as large as 256GiB, the
AHCI command header limits transactions to just 4GiB. ATA8-ACS3,
however, defines the largest transaction to be an LBA48 command
that transfers 65,536 sectors. With a 512 byte sector size, this
is just 32MiB.
Since our current state structures use the int type to describe
the size of the buffer, and this state is migrated as int32, we
are limited to describing 2GiB buffer sizes unless we change the
migration protocol.
For this reason, this patch begins to unify the assertions in the
IDE pathways that the scatter-gather list provided by either the
AHCI PRDT or the PCI BMDMA PRDs can only describe, at a maximum,
2GiB. This should be resilient enough unless we need a sector
size that exceeds 32KiB.
Further, the likelihood of any guest operating system actually
attempting to transfer this much data in a single operation is
very slim.
To this end, the IDEState variables have been updated to more
explicitly clarify our maximum supported size. Callers to the
prepare_buf callback have been reworked to understand the new
return code, and all versions of the prepare_buf callback have
been adjusted accordingly.
Lastly, the ahci_populate_sglist helper, relied upon by the
AHCI implementation of .prepare_buf() as well as the PCI
implementation of the callback have had overflow assertions
added to help make clear the reasonings behind the various
type changes.
[Added %d -> %"PRId64" fix John sent because off_pos changed from int to
int64_t.
--Stefan]
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1414785819-26209-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The intent of this patch is to further unify the creation and
deletion of the sglist used for all AHCI transfers, including
emulated PIO, ATAPI R/W, and native DMA R/W.
By replacing ahci_start_transfer's call to ahci_populate_sglist
with ahci_dma_prepare_buf, we reduce the number of direct calls
where we manipulate the scatter-gather list in the AHCI code.
To make this switch, the constant "0" passed as an offset
in ahci_dma_prepare_buf is adjusted to use io_buffer_offset.
For DMA pathways, this has no effect: io_buffer_offset is always
updated to 0 at the beginning of a DMA transfer loop regardless.
DMA pathways through ide_dma_cb() update the io_buffer_offset
accordingly, and for circumstances where we might make several
trips through this loop, this may actually correct a design flaw.
For PIO pathways, the newly updated ahci_dma_prepare_buf will
now prepare the sglist at the correct offset. It will also set
io_buffer_size, but this is not used in the cmd_read_pio or
cmd_write_pio pathways.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1414785819-26209-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently, for emulated PIO transfers through the AHCI device,
any attempt made to request more than a single sector's worth
of data will result in the same sector being transferred over
and over.
For example, if we request 8 sectors via PIO READ SECTORS, the
AHCI device will give us the same sector eight times.
This patch adds offset tracking into the PIO pathways so that
we can fulfill these requests appropriately.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1414785819-26209-2-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch fixes a regression caused by commit
659142ecf7.
The problem occurs when we wish to return early
from the ahci_start_transfer function, but are now
updating the transferred byte count in the AHCI
command header via ahci_commit_buf.
This will cause problems in the Windows 8 installer.
Don't update the byte count in the command header
for the transmission of ATAPI packets: These commands
will distort the final byte count of the actual data
payload.
The call to ahci_commit_buf remains in the "out"
portion of the call in order to clean up the sglist.
The byte count is maintained by forcing size to be 0.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
patches, pending confirmation from the submitter that they really
fix QNX.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUZMqiAAoJEL/70l94x66DQEEH/3kWZSwiC6yh5icRmLd1PX9Q
P8a5qIGQUldN54orlr4bDs4Slb6w4CVwwupT6AIFvNbZDFQVlJTMd+3ssZ03H++D
eJ9WvY3yVmrC1ofFk1WNIposk01gvM0U74Kns4ttEuJ7UyB75mhPEegQd3B8WbPa
/eJILlXu9ayxj60yEqmoR8IfqrkuuTHx7P4QmpJigGeLkBhQOq0TXjb1xi+4JPnv
BHjVjA6YNtzuMO2wP0y6KE/9HZpow0luAb+vB0NkY0NoEezVucoDWLMMUkpSiZI/
yYFEqp4lzRo2ygnJXlGvLFND6F2qacGIIU5lj5t8a2BmswqD83JEt/idQGYeIzM=
=ExeA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
x86 and SCSI fixes. I left out the APIC device model
patches, pending confirmation from the submitter that they really
fix QNX.
# gpg: Signature made Thu 13 Nov 2014 15:13:38 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
acpi: accurate overflow check
smbios: change 'ram_addr_t' variables to 'uint64_t'
kvmclock: Add comment explaining why we need cpu_clean_all_dirty()
target-i386: fix Coverity complaints about overflows
apic_common: migrate missing fields
target-i386: eliminate dead code and hoist common code out of "if"
virtio-scsi: Fix comment for VirtIOSCSIReq
virtio-scsi: dataplane: suppress guest notification
esp: Do not overwrite ESP_TCHI after reset
virtio-scsi: dataplane: fix allocation for 'cmd_vrings'
esp: fix coding standards
virtio-scsi: work around bug in old BIOSes
esp-pci: fixup deadlock with linux
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Compare clock in ns, because acpi_pm_tmr_update uses rounded
to ns value instead of ticks.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
[This lets Windows boot in icount mode. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ram_addr_t should not be used except if referring to a RAMBlobk.
Using 'uint64_t' avoids a -Wconstant-conversion warning, which
clang >= 3.4 produces in "smbios_get_tables()".
Signed-off-by: SeokYeon Hwang <syeon.hwang@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
sipi_vector is an int; it is shifted by 12 and passed as a 64-bit value,
which makes Coverity think that we wanted (uint64_t)sipi_vector << 12.
But actually it must be between 0 and 255. Make this explicit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds missed sipi_vector and wait_for_sipi fields to a new
subsection of the vmstate of the apic_common module. Saving and loading
of these fields makes migration of the apic state deterministic.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
[Initialize the field in pre_load and kvm_apic_realize. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
git shortlog since 1.7.5:
Hannes Reinecke (1):
megasas: read addional PCI I/O bar
Kevin O'Connor (5):
boot: Change ":rom%d" boot order rom instance to ":rom%x"
vgabios: Return from handle_1011() if handler found.
Don't enable thread preemption during S3 resume vga option rom execution.
build: Avoid absolute paths during "whole-program" compiling.
ehci: Fix bug in hub port assignment
Marcel Apfelbaum (1):
hw/pci: reserve IO and mem for pci express downstream ports with no devices attached
Markus Armbruster (1):
boot: Fix boot order for SCSI target, lun > 9
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.
Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.
I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.
If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.
For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.
Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.
So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ist != 0 is checked in the first "if", so it cannot be true in
the "else if" part. While at it, simplify the code and move
the ESP alignment out of the conditionals.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The cdb is not zeroed by virtio_scsi_init_req, so fix the misleading
comment.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch uses vring_should_notify() to suppress
guest notification, and looks notification frequency
can be decreased from ~33K/sec to ~2K/sec in my test
environment.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After a reset ESP_TCHI should contain the unique ID
of the chip. This value will be overwritten with the
current tranfer count if the transfer count has
previously been set.
So we should always return the chip id if ESP_TCHI
has never been written to.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current stable version of libseccomp (2.1.1) only supports i386 and
x86_64 archs correctly. This patch limits the usage of the syscall
filter for those archs and updates to the correct last version of
libseccomp.
This patch also fixes the bug:
https://bugs.launchpad.net/qemu/+bug/1363641
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Moore <pmoore@redhat.com>
fallocate() is needed for snapshotting. If it isn’t whitelisted
$ qemu-img create -f qcow2 x.qcow 1G
Formatting 'x.qcow', fmt=qcow2 size=1073741824 encryption=off cluster_size=65536 lazy_refcounts=off
$ qemu-kvm -display none -monitor stdio -sandbox on x.qcow
QEMU 2.1.50 monitor - type 'help' for more information
(qemu) savevm foo
(qemu) loadvm foo
will fail, as will subsequent savevm commands on the same image.
fadvise64(), inotify_init1(), inotify_add_watch() are needed by
the SDL display. Without the whitelist entries,
qemu-kvm -sandbox on
fails immediately.
In my tests fadvise64() is called 50--51 times per VM run. That
number seems independent of the duration of the run. fallocate(),
inotify_init1(), inotify_add_watch() are called once each.
Accordingly, they are added to the whitelist at a very low
priority.
Signed-off-by: Philipp Gesang <philipp.gesang@intra2net.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJUYh9vAAoJEL7lnXSkw9fbgPQH/065L5+SpaJR1Nte9Lz3N2s1
a6tGSI22yu85tKvYCdYjeoVHSkSTyR57FdTfUd2xc2QPj+J4sWXpA81KILBGTJUp
NMpmLpWg4LOh8Ek4ViRgmFFdryzIFa4dT4gc1AcSAIAQ6jsgK1dM7m5kfncC3TN0
TUs248vJ2i/DaE0k8TOeJqxJTqInoFttlJEqG7RD+V5JznokE4zpFNXHDGx9BptE
W2J38GJ/TKRPe9UrHMKZI1r6+ZBdXyE/CaqsNNKLJdqrHgSQuAyK/PS6dQbM4BLg
M1qdP7Tp0wOlvv9qoEZMOEiUsi54XPqLgaLMbW74Yp5X459fqmLW2imy49pHXt8=
=klsW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It returns more information than binary, fix the comment.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In xen_hvm_change_state_handler(), we can pass 'opaque' with type cast
to xen_main_loop_prepare() directly, there's no need to use additional
variable for it.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The size of each element should be sizeof(VirtIOSCSIVring *).
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two last minute fixes uncovered and fixed by Tom Musta
and Alexander Graf, thanks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=o8o5
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20141111' into staging
linux-user pull for 2.2
Two last minute fixes uncovered and fixed by Tom Musta
and Alexander Graf, thanks
# gpg: Signature made Tue 11 Nov 2014 06:36:02 GMT using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20141111:
linux-user: Fix up timer id handling
linux-user: Do not subtract offset from end address
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
bootdevice.c was created by me, and I wrote most of
the code in this file. And now I can maintain it,
I'd hope nobody object this.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>