Protocol must be spice, vnc isn't implemented. Fix up documentation.
Attempts to use vnc or any other unknown protocol yield the misleading
error message "Invalid parameter 'protocol'". Improve it to
"Parameter 'protocol' expects spice".
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by. Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
This will allow clients to query additional information directly using
qom-get on the CPU objects.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Add the qmp commands to tune and query the parameters used in live
migration.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Just a trivial patch to correct a QMP example in qmp-commands.hx.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add bdrv_clear_dirty_bitmap and a matching QMP command,
qmp_block_dirty_bitmap_clear that enables a user to reset
the bitmap attached to a drive.
This allows us to reset a bitmap in the event of a full
drive backup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-12-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new command pair is added to manage a user created dirty bitmap. The
dirty bitmap's name is mandatory and must be unique for the same device,
but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will
choose a default granularity based on the cluster size if available,
clamped to between 4K and 64K to mirror how the 'mirror' code was
already choosing granularity. If we do not have cluster size info
available, we choose 64K. This code has been factored out into a helper
shared with block/mirror.
This patch also introduces the 'block_dirty_bitmap_lookup' helper,
which takes a device name and a dirty bitmap name and validates the
lookup, returning NULL and setting errp if there is a problem with
either field. This helper will be re-used in future patches in this
series.
The types added to block-core.json will be re-used in future patches
in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The 'block-stream' QMP command is documented in block-core.json but not
qmp-commands.hx. Add a summary of the command to qmp-commands.hx
(similar to the documentation for 'block-commit').
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 1429094622-26218-1-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Live migration with spice works like this today:
(1) client_migrate_info monitor cmd
(2) spice server notifies client, client connects to target host.
(3) qemu waits until spice client connect is finished.
(4) send over vmstate (i.e. main part of live migration).
(5) spice handover to target host.
(3) is implemented by making client_migrate_info a async monitor
command. This is the only async monitor command we have.
The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel. That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.
Time to drop step (3). This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As far as the QMP parser is concerned, neither the 'O' nor the 'q' format specifiers
put any constraint on the command. However, there are two differences:
1) from a documentation point of view 'O' says that this command takes
a dictionary. The dictionary will be converted to QemuOpts in the
handler to match the corresponding HMP command.
2) 'O' sets QMP_ACCEPT_UNKNOWNS, resulting in the command accepting invalid
extra arguments. For example the following is accepted:
{ "execute": "send-key",
"arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
{ "type": "qcode", "data": "alt" },
{ "type": "qcode", "data": "delete" } ], "foo": "bar" } }
Neither send-key nor migrate-set-capabilities take a QemuOpts-like
dictionary; they take an array of dictionaries. And neither command
really wants to have extra unknown arguments. Thus, the right
specifier to use in this case is 'q'; with this patch the above
command fails with
{"error": {"class": "GenericError", "desc": "Invalid parameter 'foo'"}}
as intended.
Reported-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1426858337-21423-1-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Raise your hand if you have a physical floppy drive in a computer
you've powered on in 2015. Okay, I see we got a few weirdos in the
audience. That's okay, weirdos are welcome here.
Kidding aside, media change detection doesn't fully work, isn't going
to be fixed, and floppy passthrough just isn't earning its keep
anymore.
Deprecate block driver host_floppy now, so we can drop it after a
grace period.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
.user_print isn't used with QMP commands, only with HMP commands.
Copied over when QMP got its own command table in commit 82a56f0.
Most of them have been dropped since, but a few stragglers remain.
Drop them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add migrate_incoming/migrate-incoming to start an incoming
migration.
Once a qemu has been started with
-incoming defer
the migration can be started by issuing:
migrate_incoming uri
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Managing applications, like oVirt (http://www.ovirt.org), make extensive
use of thin-provisioned disk images.
To let the guest run smoothly and be not unnecessarily paused, oVirt sets
a disk usage threshold (so called 'high water mark') based on the occupation
of the device, and automatically extends the image once the threshold
is reached or exceeded.
In order to detect the crossing of the threshold, oVirt has no choice but
aggressively polling the QEMU monitor using the query-blockstats command.
This lead to unnecessary system load, and is made even worse under scale:
deployments with hundreds of VMs are no longer rare.
To fix this, this patch adds:
* A new monitor command `block-set-write-threshold', to set a mark for
a given block device.
* A new event `BLOCK_WRITE_THRESHOLD', to report if a block device
usage exceeds the threshold.
* A new `write_threshold' field into the `BlockDeviceInfo' structure,
to report the configured threshold.
This will allow the managing application to use smarter and more
efficient monitoring, greatly reducing the need of polling.
[Updated qemu-iotests 067 output to add the new 'write_threshold'
property. --Stefan]
[Changed g_assert_false() to !g_assert() to fix the build on older glib
versions. --Kevin]
Signed-off-by: Francesco Romani <fromani@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1421068273-692-1-git-send-email-fromani@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new query vnc qmp command, for the lack of better ideas just name it
"query-vnc-servers". Changes over query-vnc:
* It returns a list of vnc servers, so multiple vnc server instances
are covered.
* Each vnc server returns a list of server sockets. Followup patch
will use that to also report websockets. In case we add support for
multiple server sockets server sockets (to better support ipv4+ipv6
dualstack) we can add them to the list too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Similar to drive-backup, but this command uses a device id as target
instead of creating/opening an image file.
Also add blocker on target bs, since the target is also a named device
now.
Add check and report error for bs == target which became possible but is
an illegal case with introduction of blockdev-backup.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1418899027-8445-3-git-send-email-famz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUid7mAAoJEL7lnXSkw9fbX0YH/RXeoX7IN1QVEP8Z2dLq4nzt
igHm4Gd4ENX6pdluHmXAxzKoHR78yNGFegzuv0IJBfav8kGCQWW6zAf4TUk/udtn
AKPk1yauVKNzCvmYldrfbuu4HedZqkftE0tyDZuAK50pZH1hzX7qiAT1C0OlarLQ
Tqy4+ouYiRja2hLq4YJCM9mmYt0sbMDShIcHBYRTdD0cxoPZ+JZEeAQYg+FYNdIo
jioVg8NgmFZW37UWeBTCKG+DcX9NwXwyo/ASdIozM+aQcTBx/nXn7/NOAxXlxUX8
M9AS9iz+LWBfwof3HLbzLLTvTmE66Z78/TluFMmEbpK4ts0ZXRJKDHE/pfynRD0=
=PXlQ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/pull-trivial-patches-2014-12-11' into staging
trivial patches for 2014-12-11
# gpg: Signature made Thu 11 Dec 2014 18:13:58 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-12-11:
Sort include/qemu/typedefs.h
hpet: increase spelling precision
pflash_cfi02.c: associate "cfi.pflash02" to "Storage devices" category
vt82c686: fix coverity warning about out-of-bounds write
virtio: remove useless declaration of virtio_net_init()
qapi-schema: fix typo about change-vnc-password
fw_cfg: remove superfluous blank line
get_maintainer.pl: Remove the --git-chief-penguins option
configure: Replace which(1) with "has"
util: Use g_new() & friends where that makes obvious sense
util: Fuse g_malloc(); memset() into g_new0()
util: Drop superfluous conditionals around g_free()
Drop superfluous conditionals around g_strdup()
Drop superfluous conditionals around qemu_opts_del()
usb: delete redundant brackets in usb_host_handle_control()
virtio-bus: avoid breaking build when open DEBUG switch
acpi-build: Make DPRINTF working for acpi-build
acpi-build: adjust indention 8 -> 4 spaces
target-s390x: fix possible out of bounds read
qmp: fix typo in input-send-event examples
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This bool option will allow query all the node names. It iterates all
the BDSes that are assigned a name, also in this case don't query up the
backing chain.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Lack of two closed bracket in json commands.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Ongoing discussions on how we are going to specify the console,
so tag the command as experiental so we can refine things in
the 2.3 development cycle.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1416923657-10614-1-git-send-email-armbru@redhat.com
[Spell out "not a stable API", and x- the QAPI schema, too]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'QemuConsole' is the input source for handler, we share some
input handlers to process the input events from different QemuConsole.
Normally we only have one set of keyboard, mouse, usbtablet, etc.
The devices have different mask, it's fine to just checking mask to
insure that the handler has the ability to process the event.
I saw we try to bind console to handler in usb/dev-hid.c, but display
always isn't available at that time.
If we have multiseat setup (as Gerd said), we only have 'problem' in
this case. Actually event from different devices have the same effect
for system, it's fine to always use the first available handler
without caring about the console.
For send-key command, we just pass a NULL for console parameter in
calling qemu_input_event_send_key(NULL, ..), but 'input-send-event'
needs to care more devices.
Conclusion:
Generally assigning the special console is meanless, and we can't
directly remove the QMP parameter for compatibility.
So we can make the parameter optional. The parameter might be useful
for some special condition: we have multiple devices without binding
console and they all have the ability(mask) to process events, and
we don't want to use the first one.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.
This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.
This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.
This changes inject-nmi command description for HMP and QMP.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows a user to make a live change to the backing file recorded in
an open image.
The image file to modify can be specified 2 ways:
1) image filename
2) image node-name
Note: this does not cause the backing file itself to be reopened; it
merely changes the backing filename in the image file structure, and
in internal BDS structures.
It is the responsibility of the user to pass a filename string that
can be resolved when the image chain is reopened, and the filename
string is not validated.
A good analogy for this command is that it is a live version of
'qemu-img rebase -u', with respect to changing the backing file string.
[Jeff is offline so I respun this patch in his absence. Dropped image
filename since using node-name is preferred and this is a new command.
No need to introduce the limitations of finding images by filename.
--Stefan]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is necessary to reset RTC interrupt reinjection backlog if
guest time is synchronized via a different mechanism, such as
QGA's guest-set-time command.
Failing to do so causes both corrections to be applied (summed),
resulting in an incorrect guest time.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=Wwqx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches for 2.1.0-rc0
# gpg: Signature made Fri 27 Jun 2014 19:50:32 BST using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (47 commits)
iotests: Fix 083 for out-of-tree builds
iotests: Drop Python version from 065's Shebang
iotests: Use $PYTHON for Python scripts
iotests: Source common.env
configure: Enable out-of-tree iotests
iotests: Allow out-of-tree run
block.c: Don't return success for bdrv_append_temp_snapshot() failure
qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode.
block: Add replaces argument to drive-mirror
blockjob: Fix recent BLOCK_JOB_ERROR regression
blockjob: Fix recent BLOCK_JOB_READY regression
virtio-blk: Rename complete_request_early to complete_request_vring
virtio-blk: Unify {non-,}dataplane's request handlings
virtio-blk: Schedule BH in the right context
virtio-blk: Export request handling functions to dataplane
virtio-blk: Make request completion function virtual
block: acquire AioContext in qmp_query_blockstats()
block: make bdrv_query_stats() static
virtio-blk: Fix and clean up the in_sg and out_sg check
virtio-blk: Fill in VirtIOBlockReq.out in dataplane code
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.
Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This new argument can be used to specify the node-name of the new mirrored BDS.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
... to get ACPI OSPM status reported by ACPI devices
via _OST method.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... allowing to get state of present memory devices.
Currently implemented only for PCDIMMDevice.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add qmp command query-memdev to query for information
of memory devices
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change qapi interfaces to output the newly added def_value_str when querying
command line options.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* remotes/qmp-unstable/queue/qmp:
qapi: zero-initialize all QMP command parameters
scripts/qapi.py: Avoid syntax not supported by Python 2.4
doc: add "setup" to list of migration states
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On a slow VM (e.g., nested), you see the "setup" state when you query the
migration status.
Signed-off-by: Peter Feiner <peter@gridcentric.ca>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
this patch tries to optimize zero write requests
by automatically using bdrv_write_zeroes if it is
supported by the format.
This significantly speeds up file system initialization and
should speed zero write test used to test backend storage
performance.
I ran the following 2 tests on my internal SSD with a
50G QCOW2 container and on an attached iSCSI storage.
a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX
QCOW2 [off] [on] [unmap]
-----
runtime: 14secs 1.1secs 1.1secs
filesize: 937M 18M 18M
iSCSI [off] [on] [unmap]
----
runtime: 9.3s 0.9s 0.9s
b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct
QCOW2 [off] [on] [unmap]
-----
runtime: 246secs 18secs 18secs
filesize: 51G 192K 192K
throughput: 203M/s 2.3G/s 2.3G/s
iSCSI* [off] [on] [unmap]
----
runtime: 8mins 45secs 33secs
throughput: 106M/s 1.2G/s 1.6G/s
allocated: 100% 100% 0%
* The storage was connected via an 1Gbit interface.
It seems to internally handle writing zeroes
via WRITESAME16 very fast.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Our example should use the correct quotes to match what someone
could actually pass over the wire.
* qmp-commands.hx: Use correct JSON quotes.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
expose the count that logs the times of updating the dirty bitmap to
end user.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Stefan Fritsch just fixed a virtio-net driver bug [1], virtio-net won't
filter out VLAN-tagged packets if VIRTIO_NET_F_CTRL_VLAN isn't negotiated.
This patch added a new field to @RxFilterInfo to indicate vlan receive
state ('normal', 'none', 'all'). If VIRTIO_NET_F_CTRL_VLAN isn't
negotiated, vlan receive state will be 'all', then all VLAN-tagged packets
will be received by guest.
This patch also fixed a boundary issue in visiting vlan table.
[1] http://lists.nongnu.org/archive/html/qemu-devel/2014-02/msg02604.html
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The "query-iothreads" command returns a list of information about
iothreads. See the patch for API documentation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
'query-dump-guest-memory-capability' is used to query the available formats for
'dump-guest-memory'. The output of the command will be like:
-> { "execute": "query-dump-guest-memory-capability" }
<- { "return": { "formats":
["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.
Note:
1. The kdump-compressed format is readable only with the crash utility and
makedumpfile, and it can be smaller than the ELF format because of the
compression support.
2. The kdump-compressed format is the 6th edition.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Introduce 'query-chardev-backends' QMP command which lists all
supported character device backends.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.
In the case of the base image being smaller, it is resized to the
larger size of the snapshot image. In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Fam Zheng <famz@redhat.com>
There was two candidate ways to implement named node manipulation:
1)
{ 'command': 'block_passwd', 'data': {'*device': 'str',
'*node-name': 'str', 'password': 'str'}
}
2)
{ 'command': 'block_passwd', 'data': {'device': 'str',
'*device-is-node': 'bool',
'password': 'str'} }
Luiz proposed 1 and says 2 was an abuse of the QMP interface and proposed to
rewrite the QMP block interface for 2.0.
Luiz does not like in 1 the fact that 2 fields are optional but one of them must
be specified leading to an abuse of the QMP semantic.
Kevin argumented that 2 what a clear abuse of the device field and would not be
practical when reading fast some log file because the user would read "device"
and think that a device is manipulated when it's in fact a node name.
Documentation of 1 make it pretty clear what to do for the user.
Kevin argued that all bs are node including devices ones so 2 does not make
sense.
Kevin also argued that rewriting the QMP block interface would not make disapear
the current one.
Kevin pushed the argument that making the QAPI generator compatible with the
semantic of the operation would need a rewrite that no one has done yet.
A vote has been done on the list to elect the version to use and 1 won.
For reference the complete thread is:
"[Qemu-devel] [PATCH V4 4/7] qmp: Allow to change password on names block driver
states."
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add two commands that are the monitor counterparts of -object. The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
These two commands invoke the "unparent" method of Object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.
Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Unlike savevm, the qmp_transaction interface will not generate
snapshot name automatically, saving trouble to return information
of the new created snapshot.
Although qcow2 support storing multiple snapshots with same name
but different ID, here it will fail when an snapshot with that name
already exist before the operation. Format such as rbd do not support
ID at all, and in most case, it means trouble to user when he faces
multiple snapshots with same name, so ban that case. Request with
empty name will be rejected.
Snapshot ID can't be specified in this interface.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This feature can be used in case where users are avoiding the iops limit by
doing jumbo I/Os hammering the storage backend.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The max parameter of the leaky bucket throttling algorithm can be used to
allow the guest to do bursts.
The max value is a pool of I/O that the guest can use without being throttled
at all. Throttling is triggered once this pool is empty.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Per the qapi schema, block_set_io_throttle takes most arguments
as ints, not strings.
* qmp-commands.hx (block_set_io_throttle): Use correct type. Fix
whitespace and a copy-paste bug in the process.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.
The CPU to receive the RESTART interrupt is the "default" one.
There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".
In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
"default" CPU and call s390_cpu_restart for it;
3. fix some messages.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Was missing 'setup-time' in some of the QMP documentation...
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1376078746-24948-7-git-send-email-mrhines@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds sync-modes to the drive-backup interface and
implements the FULL, NONE and TOP modes of synchronization.
FULL performs as before copying the entire contents of the drive
while preserving the point-in-time using CoW.
NONE only copies new writes to the target drive.
TOP copies changes to the topmost drive image and preserves the
point-in-time using CoW.
For sync mode TOP are creating a new target image using the same backing
file as the original disk image. Then any new data that has been laid
on top of it since creation is copied in the main backup_run() loop.
There is an extra check in the 'TOP' case so that we don't bother to copy
all the data of the backing file as it already exists in the target.
This is where the bdrv_co_is_allocated() is used to determine if the
data exists in the topmost layer or below.
Also any new data being written is intercepted via the write_notifier
hook which ends up calling backup_do_cow() to copy old data out before
it gets overwritten.
For mode 'NONE' we create the new target image and only copy in the
original data from the disk image starting from the time the call was
made. This preserves the point in time data by only copying the parts
that are *going to change* to the target image. This way we can
reconstruct the final image by checking to see if the given block exists
in the new target image first, and if it does not, you can get it from
the original image. This is basically an optimization allowing you to
do point-in-time snapshots with low overhead vs the 'FULL' version.
Since there is no old data to copy out the loop in backup_run() for the
NONE case just calls qemu_coroutine_yield() which only wakes up after
an event (usually cancel in this case). The rest is handled by the
before_write notifier which again calls backup_do_cow() to write out
the old data so it can be preserved.
Signed-off-by: Ian Main <imain@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Amos Kong (1) and Luiz Capitulino (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
qmp: update send-key document
qapi: qapi-commands: fix possible leaks on visitor dealloc
Message-id: 1374093679-29213-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJR5meNAAoJECgfDbjSjVRp24IIAMOkxbb85FJ323G/x5cQBzA/
gjFDmvB6geIMBorX1YZRnIM+RFhx+mkXtBTu2raWVTNTt5G2u3vAQQWW2zSiOTBL
gH4BhzJnUoqLHOydWql2MsGS7DMQo4Fq8OnzRBkZ119AEEqNMad1w2LykwFWs4ra
k3bsPNCZM+ZNiLMWtQLOcD3FYvoiISinqFd81KOnxvDiT90rczk4dLWqjv8smNif
WqZ7aCD1hGJ5yD7JI2YjCbhVvu4F7tBK+fWkT/O3oYslh/o241lyxUriOXMKdKML
04sNXa5eWue9cOKlbo1G+yfFwFg1JDsAMe/Usg0KXz1MMK91wiWE763ESPbFBK0=
=P+pr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,net,pc enhancements
This includes some fixes and enhancements that accumulated in my tree:
pci fixes by dkoch, virtio-net enhancements by akong and mst,
and a fix for xen pc by mst.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 17 Jul 2013 04:44:45 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Don Koch (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pc: don't access fw cfg if NULL
virtio-net: add feature bit for any header s/g
net: add support of mac-programming over macvtap in QEMU side
pci: fix BRDIGE typo
pci-bridge: update mappings for migration/restore
Message-id: 1374054430-21966-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
commit 9f328977 changes qmp_send_key() to accept key codes in hex,
but the document wasn't updated. The items of keys list is union
now, not enum.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Currently macvtap based macvlan device is working in promiscuous
mode, we want to implement mac-programming over macvtap through
Libvirt for better performance.
Design:
QEMU notifies Libvirt when rx-filter config is changed in guest,
then Libvirt query the rx-filter information by a monitor command,
and sync the change to macvtap device. Related rx-filter config
of the nic contains main mac, rx-mode items and vlan table.
This patch adds a QMP event to notify management of rx-filter change,
and adds a monitor command for management to query rx-filter
information.
Test:
If we repeatedly add/remove vlan, and change macaddr of vlan
interfaces in guest by a loop script.
Result:
The events will flood the QMP client(management), management takes
too much resource to process the events.
Event_throttle API (set rate to 1 ms) can avoid the events to flood
QMP client, but it could cause an unexpected delay (~1ms), guests
guests normally expect rx-filter updates immediately.
So we use a flag for each nic to avoid events flooding, the event
is emitted once until the query command is executed. The flag
implementation could not introduce unexpected delay.
There maybe exist an uncontrollable delay if we let Libvirt do the
real change, guests normally expect rx-filter updates immediately.
But it's another separate issue, we can investigate it when the
work in Libvirt side is done.
Michael S. Tsirkin: tweaked to enable events on start
Michael S. Tsirkin: fixed not to crash when no id
Michael S. Tsirkin: fold in patch:
"additional fixes for mac-programming feature"
Amos Kong: always notify QMP client if mactable is changed
Amos Kong: return NULL list if no net client supports rx-filter query
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The drive-backup command is similar to the drive-mirror command, except
no guest data written after the command executes gets copied. Add a
sync mode argument which determines whether the entire disk is copied,
just allocated clusters, or only clusters being written to by the guest.
Currently only sync mode 'full' is supported - it copies the entire disk.
For read-only point-in-time snapshots we may only need sync mode 'none'
since the target can be a qcow2 file using the guest's disk as its
backing file (no need to copy the entire disk). Finally, sync mode
'top' is useful if we wish to preserve the backing chain.
Note that this patch just adds the sync mode argument to drive-backup.
It does not implement sync modes 'top' or 'none'. This patch is
necessary so we can add a drive-backup HMP command that behaves like the
existing drive-mirror HMP command and takes a sync mode.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
@drive-backup
Start a point-in-time copy of a block device to a new destination. The
status of ongoing drive-backup operations can be checked with
query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
The operation can be stopped before it has completed using the
block-job-cancel command.
@device: the name of the device which should be copied.
@target: the target of the new image. If the file exists, or if it
is a device, the existing file/device will be used as the new
destination. If it does not exist, a new file will be created.
@format: #optional the format of the new destination, default is to
probe if @mode is 'existing', else the format of the source
@mode: #optional whether and how QEMU should create a new image, default is
'absolute-paths'.
@speed: #optional the maximum speed, in bytes per second
@on-source-error: #optional the action to take on an error on the source,
default 'report'. 'stop' and 'enospc' can only be used
if the block device supports io-status (see BlockInfo).
@on-target-error: #optional the action to take on an error on the target,
default 'report' (no limitations, since this applies to
a different block device than @device).
Note that @on-source-error and @on-target-error only affect background I/O.
If an error occurs during a guest write request, the device's rerror/werror
actions will be used.
Returns: nothing on success
If @device is not a valid block device, DeviceNotFound
Since 1.6
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now image info will be retrieved as an embbed json object inside
BlockDeviceInfo, backing chain info and all related internal snapshot
info can be got in the enhanced recursive structure of ImageInfo. New
recursive member *backing-image is added to reflect the backing chain
status.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Igor Mammedov (21) and others
# Via Andreas Färber
* afaerber/qom-cpu: (29 commits)
Drop redundant resume_all_vcpus() from main()
cpus: Fix pausing TCG CPUs while in vCPU thread
target-i386: Replace cpuid_*features fields with a feature word array
target-i386: Break CPUID feature definition lines
target-i386/kvm.c: Code formatting changes
target-i386: Group together level, xlevel, xlevel2 fields
pc: Implement QEMUMachine::hot_add_cpu hook
QMP: Add cpu-add command
Add hot_add_cpu hook to QEMUMachine
target-i386: Move APIC to ICC bus
target-i386: Attach ICC bus to CPU on its creation
target-i386: Introduce ICC bus/device/bridge
cpu: Move cpu_write_elfXX_note() functions to CPUState
kvmvapic: Make dependency on sysbus.h explicit
target-i386: Replace MSI_SPACE_SIZE with APIC_SPACE_SIZE
target-i386: Do not allow to set apic-id once CPU is realized
target-i386: Introduce apic-id CPU property
target-i386: Introduce feat2prop() for CPU properties
acpi_piix4: Add infrastructure to send CPU hot-plug GPE to guest
cpu: Add helper cpu_exists(), to check if CPU with specified id exists
...
similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation
Most changes are in comments, one modifies a parameter name in a function
prototype.
The spelling fixes were made using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Adds "cpu-add id=xxx" QMP command.
cpu-add's "id" argument is a CPU number in a range [0..max-cpus)
Example QMP command:
-> { "execute": "cpu-add", "arguments": { "id": 2 } }
<- { "return": {} }
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Peter Lieven (9) and others
# Via Juan Quintela
* quintela/migration.next: (22 commits)
Use qemu_put_buffer_async for guest memory pages
Add qemu_put_buffer_async
Use writev ops if available
Store the data to send also in iovec
Update bytes_xfer in qemu_put_byte
Add socket_writev_buffer function
Add QemuFileWritevBuffer QemuFileOps
migration: use XBZRLE only after bulk stage
migration: do not search dirty pages in bulk stage
migration: do not sent zero pages in bulk stage
migration: add an indicator for bulk state of ram migration
migration: search for zero instead of dup pages
bitops: unroll while loop in find_next_bit()
buffer_is_zero: use vector optimizations if possible
cutils: add a function to find non-zero content in a buffer
move vector definitions to qemu-common.h
savevm: Fix bugs in the VMSTATE_VBUFFER_MULTIPLY definition
savevm: Add VMSTATE_STRUCT_VARRAY_POINTER_UINT32
savevm: Add VMSTATE_FLOAT64 helpers
savevm: Add VMSTATE_UINTTL_EQUAL helper
...
during bulk stage of ram migration if a page is a
zero page do not send it at all.
the memory at the destination reads as zero anyway.
even if there is an madvise with QEMU_MADV_DONTNEED
at the target upon receipt of a zero page I have observed
that the target starts swapping if the memory is overcommitted.
it seems that the pages are dropped asynchronously.
this patch also updates QMP to return the number of
skipped pages in MigrationStats.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch adds support for TPM command line options.
The command line options supported here are
./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
-device tpm-tis,tpmdev=<id>,id=<other id>
and
./qemu-... -tpmdev help
where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').
Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.
Monitor support for 'info tpm' has been added. It for example prints the
following:
(qemu) info tpm
TPM devices:
tpm0: model=tpm-tis
\ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
New device, has never been released, so we can still improve things
without worrying about compatibility.
Naming is a mess. The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO". "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver. Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory. Therefore:
* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
"ringbuf" in the API.
* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.
* Rename device parameter from maxcapacity to size (simple words are
good for you).
* Clearly mark the parameter as optional in documentation.
* Fix error reporting so that chardev-add reports to current monitor,
not stderr.
* Replace cirmem in C identifiers by ringbuf.
* Rework documentation. Document the impact of our crappy UTF-8
handling on reading.
* QMP examples that even work.
I could split this up into multiple commits, but they'd change the
same documentation lines multiple times. Not worth it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The data returned has a well-defined size, which makes the size
returned along with it redundant at best. Drop it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Command memchar-write takes data and size parameter. Begs the
question what happens when data doesn't match size.
With format base64, qmp_memchar_write() copies the full data argument,
regardless of size argument.
With format utf8, qmp_memchar_write() copies size bytes from data,
happily reading beyond data. Copies crap from the heap or even
crashes.
Drop the size parameter, and always copy the full data argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we are using 'tray_open' in QMP and 'tray-open' in
HMP. However, the QMP documentation was mistakenly using the
HMP version.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...