For "dirty-bitmap" sync mode, the block job will iterate through the
given dirty bitmap to decide if a sector needs backup (backup all the
dirty clusters and skip clean ones), just as allocation conditions of
"top" sync mode.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-11-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A bitmap successor is an anonymous BdrvDirtyBitmap that is intended to
be created just prior to a sensitive operation (e.g. Incremental Backup)
that can either succeed or fail, but during the course of which we still
want a bitmap tracking writes.
On creating a successor, we "freeze" the parent bitmap which prevents
its deletion, enabling, anonymization, or creating a bitmap with the
same name.
On success, the parent bitmap can "abdicate" responsibility to the
successor, which will inherit its name. The successor will have been
tracking writes during the course of the backup operation. The parent
will be safely deleted.
On failure, we can "reclaim" the successor from the parent, unifying
them such that the resulting bitmap describes all writes occurring since
the last successful backup, for instance. Reclamation will thaw the
parent, but not explicitly re-enable it.
BdrvDirtyBitmap operations that target a single bitmap are protected
by assertions that the bitmap is not frozen and/or disabled.
BdrvDirtyBitmap operations that target a group of bitmaps, such as
bdrv_{set,reset}_dirty will ignore frozen/disabled drives with a
conditional instead.
Internal functions that enable/disable dirty bitmaps have assertions
added to them to prevent modifying frozen bitmaps.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-10-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a status indicating the enabled/disabled state of the bitmap.
A bitmap is by default enabled, but you can lock the bitmap into
a read-only state by setting disabled = true.
A previous version of this patch added a QMP interface for changing
the state of the bitmap, but it has since been removed for now until
a use case emerges where this state must be revealed to the user.
The disabled state WILL be used internally for bitmap migration and
bitmap persistence.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We add a bitmap merge operation to assist in error cases
where we wish to combine two bitmaps together.
This is algorithmically O(bits) provided HBITMAP_LEVELS remains
constant. For a full bitmap on a 64bit machine:
sum(bits/64^k, k, 0, HBITMAP_LEVELS) ~= 1.01587 * bits
We may be able to improve running speed for particularly sparse
bitmaps by using iterators, but the running time for dense maps
will be worse.
We present the simpler solution first, and we can refine it later
if needed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-8-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This returns the granularity (in bytes) of dirty bitmap,
which matches the QMP interface and the existing query
interface.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The new command pair is added to manage a user created dirty bitmap. The
dirty bitmap's name is mandatory and must be unique for the same device,
but different devices can have bitmaps with the same names.
The granularity is an optional field. If it is not specified, we will
choose a default granularity based on the cluster size if available,
clamped to between 4K and 64K to mirror how the 'mirror' code was
already choosing granularity. If we do not have cluster size info
available, we choose 64K. This code has been factored out into a helper
shared with block/mirror.
This patch also introduces the 'block_dirty_bitmap_lookup' helper,
which takes a device name and a dirty bitmap name and validates the
lookup, returning NULL and setting errp if there is a problem with
either field. This helper will be re-used in future patches in this
series.
The types added to block-core.json will be re-used in future patches
in this series, see:
'qapi: Add transaction support to block-dirty-bitmap-{add, enable, disable}'
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1429314609-29776-5-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We treat this field with a variety of different types everywhere
in the code. Now it's just uint32_t.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-4-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This field will be set for user created dirty bitmap. Also pass in an
error pointer to bdrv_create_dirty_bitmap, so when a name is already
taken on this BDS, it can report an error message. This is not global
check, two BDSes can have dirty bitmap with a common name.
Implemented bdrv_find_dirty_bitmap to find a dirty bitmap by name, will
be used later when other QMP commands want to reference dirty bitmap by
name.
Add bdrv_dirty_bitmap_make_anon. This unsets the name of dirty bitmap.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1429314609-29776-3-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The image field in BlockDeviceInfo is supposed to contain an ImageInfo
object. However that is being filled in by bdrv_query_info(), not by
bdrv_block_device_info(), which is where BlockDeviceInfo is actually
created.
Anyone calling bdrv_block_device_info() directly will get a null image
field. As a consequence of this, the HMP command 'info block -n -v'
crashes QEMU.
This patch moves the code that fills in that field from
bdrv_query_info() to bdrv_block_device_info().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1429271563-3765-1-git-send-email-berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are several error messages that identify a BlockDriverState by
its device name. However those errors can be produced in nodes that
don't have a device name associated.
In those cases we should use bdrv_get_device_or_node_name() to fall
back to the node name and produce a more meaningful message. The
messages are also updated to use the more generic term 'node' instead
of 'device'.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 9823a1f0514fdb0692e92868661c38a9e00a12d6.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function gets the device name associated with a BlockDriverState,
or its node name if the device name is empty.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 4fa30aa8d61d9052ce266fd5429a59a14e941255.1428485266.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
update virtio blk header from latest linux, include comment fixups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1428854036-12806-1-git-send-email-mst@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch changes block_job_pause to increase the pause counter and
block_job_resume to decrease it.
The counter will allow calling block_job_pause/block_job_resume
unconditionally on a job when we need to suspend the IO temporarily.
From now on, each block_job_resume must be paired with a block_job_pause
to keep the counter balanced.
The user pause from QMP or HMP will only trigger block_job_pause once
until it's resumed, this is achieved by adding a user_paused flag in
BlockJob.
One occurrence of block_job_resume in mirror_complete is replaced with
block_job_enter which does what is necessary.
In block_job_cancel, the cancel flag is good enough to instruct
coroutines to quit loop, so use block_job_enter to replace the unpaired
block_job_resume.
Upon block job IO error, user is notified about the entering to the
pause state, so this pause belongs to user pause, set the flag
accordingly and expect a matching QMP resume.
[Extended doc comments as suggested by Paolo Bonzini
<pbonzini@redhat.com>.
--Stefan]
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1428069921-2957-2-git-send-email-famz@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is the first step in pushing down acquire/release, and will let
rfifolock drop the contention callback feature.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
By using thread-local storage, aio_poll can stop using global data during
g_poll_ns. This will make it possible to drop callbacks from rfifolock.
[Moved npfd = 0 assignment to end of walking_handlers region as
suggested by Paolo. This resolves the assert(npfd == 0) assertion
failure in pollfds_cleanup().
--Stefan]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1424449612-18215-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The lack of ffs(3) in the MinGW headers is a hint that we shouldn't rely
on it. MinGW 4.9.2 does not make it available for linking when QEMU's
./configure --enable-debug is used (release builds are fine though).
Now that all QEMU code has been switched to ctz32() there is no need for
ffs(3).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-9-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=hDRI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150427' into staging
target-arm queue:
* memory system updates to support transaction attributes
* set user-mode and secure attributes for accesses made by ARM CPUs
* rename c1_coproc to cpacr_el1
* adjust id_aa64pfr0 when has_el3 CPU property disabled
* allow ARMv8 SCR.SMD updates
# gpg: Signature made Mon Apr 27 16:14:30 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150427:
Allow ARMv8 SCR.SMD updates
target-arm: Adjust id_aa64pfr0 when has_el3 CPU property disabled
target-arm: rename c1_coproc to cpacr_el1
target-arm: Check watchpoints against CPU security state
target-arm: Use attribute info to handle user-only watchpoints
target-arm: Add user-mode transaction attribute
target-arm: Use correct memory attributes for page table walks
target-arm: Honour NS bits in page tables
Switch non-CPU callers from ld/st*_phys to address_space_ld/st*
exec.c: Capture the memory attributes for a watchpoint hit
exec.c: Add new address_space_ld*/st* functions
exec.c: Make address_space_rw take transaction attributes
exec.c: Convert subpage memory ops to _with_attrs
Add MemTxAttrs to the IOTLB
Make CPU iotlb a structure rather than a plain hwaddr
memory: Replace io_mem_read/write with memory_region_dispatch_read/write
memory: Define API for MemoryRegionOps to take attrs and return status
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Spice protocol uses cursor position on hotspot: the client is
applying hotspot offset when drawing the cursor.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Denis Kirjanov is busy getting spice run on ppc64 and trapped into this
one. Spice wire format is little endian, so we have to explicitly say
we want little endian when letting pixman convert the data for us.
Reported-by: Denis Kirjanov <kirjanov@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Live migration with spice works like this today:
(1) client_migrate_info monitor cmd
(2) spice server notifies client, client connects to target host.
(3) qemu waits until spice client connect is finished.
(4) send over vmstate (i.e. main part of live migration).
(5) spice handover to target host.
(3) is implemented by making client_migrate_info a async monitor
command. This is the only async monitor command we have.
The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel. That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.
Time to drop step (3). This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Capture the memory attributes for the transaction which triggered
a watchpoint; this allows CPU specific code to implement features
like ARM's "user-mode only WPs also hit for LDRT/STRT accesses
made from privileged code". This change also correctly passes
through the memory attributes to the underlying device when
a watchpoint access doesn't hit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add new address_space_ld*/st* functions which allow transaction
attributes and error reporting for basic load and stores. These
are named to be in line with the address_space_read/write/rw
buffer operations.
The existing ld/st*_phys functions are now wrappers around
the new functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a MemTxAttrs field to the IOTLB, and allow target-specific
code to set it via a new tlb_set_page_with_attrs() function;
pass the attributes through to the device when making IO accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make the CPU iotlb a structure rather than a plain hwaddr;
this will allow us to add transaction attributes to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rather than retaining io_mem_read/write as simple wrappers around
the memory_region_dispatch_read/write functions, make the latter
public and change all the callers to use them, since we need to
touch all the callsites anyway to add MemTxAttrs and MemTxResult
support. Delete io_mem_read and io_mem_write entirely.
(All the callers currently pass MEMTXATTRS_UNSPECIFIED
and convert the return value back to bool or ignore it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Define an API so that devices can register MemoryRegionOps whose read
and write callback functions are passed an arbitrary pointer to some
transaction attributes and can return a success-or-failure status code.
This will allow us to model devices which:
* behave differently for ARM Secure/NonSecure memory accesses
* behave differently for privileged/unprivileged accesses
* may return a transaction failure (causing a guest exception)
for erroneous accesses
This patch defines the new API and plumbs the attributes parameter through
to the memory.c public level functions io_mem_read() and io_mem_write(),
where it is currently dummied out.
The success/failure response indication is also propagated out to
io_mem_read() and io_mem_write(), which retain the old-style
boolean true-for-error return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a new function to get a nice label for a given QemuConsole.
Drop the labeling code in gtk.c and use the new function instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The type name for the SoC device, unlike those of its sub-devices,
did not follow the QOM naming conventions. While the usage is internal
only, this is exposed through QMP and HMP, so fix it before release.
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Message-id: 1428676676-23056-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After qemu_iovec_destroy, the QEMUIOVector's size is zeroed and
the zero size ultimately is used to compute virtqueue_push's len
argument. Therefore, reads from virtio-blk devices did not
migrate their results correctly. (Writes were okay).
Save the size in virtio_blk_handle_request, and use it when the request
is completed.
Based on a patch by Wen Congyang.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-id: 1427997044-392-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 89b516d8b9 ("glib: add
compatibility interface for g_get_monotonic_time()") aimed
at making qemu build with old glib versions. At least SLES11SP3,
however, contains a backport of g_get_monotonic_time() while
keeping the reported glib version at 2.22.
Let's work around this by a strategically placed #define.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1427987865-433-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the BSP bit is writable on real hardware, during reset all the CPUs which
were not chosen to be the BSP should have their BSP bit cleared. This fix is
required for KVM to work correctly when it changes the BSP bit.
An additional fix is required for QEMU tcg to allow software to change the BSP
bit.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427932716-11800-1-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread. There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec. Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.
Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.
This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.
User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.
Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If backends implement the can_be_deleted and it returns false,
Then the qmp_object_del won't delete the given backends.
Signed-off-by: Lin Ma <lma@suse.com>
Message-Id: <1427704589-7688-2-git-send-email-lma@suse.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Capture the explicit setting of "usb=no" into a separate bool, and
use it to skip the update of machine->usb in the board init function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gCrW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/work/numa-verify-cpus-pull-request' into staging
NUMA queue 2015-03-19
# gpg: Signature made Thu Mar 19 19:25:53 2015 GMT using RSA key ID 984DC5A6
# gpg: Can't check signature: public key not found
* remotes/ehabkost/tags/work/numa-verify-cpus-pull-request:
numa: Print warning if no node is assigned to a CPU
pc: fix default VCPU to NUMA node mapping
numa: introduce machine callback for VCPU to node mapping
numa: Reject configuration if CPU appears on multiple nodes
numa: Reject CPU indexes > max_cpus
numa: Fix off-by-one error at MAX_CPUMASK_BITS check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Current default round-robin way of distributing VCPUs among
NUMA nodes might be wrong in case on multi-core/threads
CPUs. Making guests confused wrt topology where cores from
the same socket are on different nodes.
Allow a machine to override default mapping by providing
MachineClass::cpu_index_to_socket_id()
callback which would allow it group VCPUs from a socket
on the same NUMA node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Users of virtio-serial may want to know when a port becomes writable. A
port can stop accepting writes if the guest port is open but not being
read from. In this case, data gets queued up in the virtqueue, and
after the vq is full, writes to the port do not succeed.
When the guest reads off a vq element, and adds a new one for the host
to put data in, we can tell users the port is available for more writes,
via the new ->guest_writable() callback.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVCXAHAAoJECgfDbjSjVRp6zcH/A1NwWCefPfGj2wLc/GdhKJ4
NcxNYQwNh/C687BKV+iBFvUqh+G1lkuoz7OYX+EGvzadqeWmDX7uIhCm8z01aqb0
La/afm/JyB22Vz7Za1od+JUyjwSJoyBiD/1OI/lS6/6fPLtj1vwnyC4V6zmJgXDt
OvWKYk/xexMSnQH8Gutw74Kasdvh+ui1l2T1Ti5VlYY5Ea6a36dDxqKhdMOdMOpE
5zAQHNGYihtQhxjJPUdvoCR0zNknNGd62XpMBk7mEvB98yCZnLLZ/HnbeDjUV9gN
Lj8yG1nbsiGA2uu4XHD+PTHW3wN0K/DDM9XDDGOHuh7jsBB7XSrVBD/TnQuUmUg=
=sL0e
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, virtio bugfixes for 2.3
Just a bunch of bugfixes. Should be nothing remarkable here.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Mar 18 12:31:03 2015 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
pcie_aer: fix comment to match pcie spec
pci: fix several trivial typos in comment
aer: fix a wrong init PCI_ERR_COR_STATUS w1cmask type register
pcie_aer: fix typos in pcie_aer_inject_error comment
aer: fix wrong check on expose aer tlp prefix log
pcie: correct mistaken register bit for End-End TLP Prefix Blocking
virtio: Fix memory leaks reported by Coverity
virtio: validate the existence of handle_output before calling it
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This fixes a warning from Coverity.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>