In the kconfig shuffle arm lost pci-testdev which is used by
kvm-unit-tests. Let's add it back.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20190322163059.9716-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some drivers do I2C bitbanging by keeping the output to 0 and flipping
the GPIO direction between input and output (see for example in Linux
gpio_set_open_drain_value_commit, in drivers/gpio/gpiolib.c).
When the GPIO is set to input, the pull-up resistor brings the output
to 1, while when the GPIO is set to output, the output driver brings
the output to 0.
Implement this for the nRF51 GPIO device model. First, if both input and
output are floating, and there is a pull-up or pull-down resistor
configured, do not just set s->in, but also make any devices listening
on the output qemu_irq receive that value. Second, if the pin is
driven both internally (output pin) and externally you don't get a
short circuit if both sides drive the pin to the same value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190317141001.3346-1-pbonzini@redhat.com
[PMM: wrapped long line]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The second word has been loaded from the unincremented
address since the first commit.
Fixes: 44ac14b06f
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190322234302.12770-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=TUq6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/slirp-pull-request' into staging
slirp: clarify license of slirp as BSD-3
# gpg: Signature made Fri 22 Mar 2019 19:16:50 GMT
# gpg: using RSA key DAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/slirp-pull-request:
slirp: is not maintained by Kelly Price for a long time
slirp: remove reference to COPYRIGHT file
slirp: clarify license of slirp files using SPDX: implicit via unstated
slirp: clarify license of slirp files using SPDX: implicit via COPYRIGHT
slirp: clarify license of slirp files using SPDX: explicit MIT
slirp: clarify license of slirp files using SPDX: explicit BSD
slirp: relicense GPL files to BSD-3
slirp: update COPYRIGHT to use full 3-Clause BSD License
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
slirp has been maintained by the QEMU maintainers and will be
maintained under an independent project soon.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kelly Price <strredwolf@gmail.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
The slirp COPYRIGHT file is a BSD-3 license. Instead of referring to
another project file, the SPDX license notice present in all source
files states that unequivocally.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add SPDX license identifier to clarify the license of files without
explicit license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
reference to BSD license from slirp COPYRIGHT file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit MIT license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Add SPDX license identifier to clarify the license of files with
explicit 3-clause BSD license header.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
In order to make slirp a standalone project, the project must have a
clear license, and be compatible with the GPL or LGPL.
Since commit 2f5f899631 ("Remove the
advertising clause from the slirp license"), slirp is BSD-3. But new
files have been added under slirp/ with QEMU GPL license since then.
The copyright holders have been asked to relicense files to BSD-3 and
gave their permission:
- slirp/dhcpv6.{c,h}
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, Thomas Huth <thuth@redhat.com>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org>
Date: Mon, 11 Mar 2019 16:23:25 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Fine for me. You can change the license of slirp/ncsi.c and
slirp/ncsi-pkt.hto a 3-Clause BSD.
Thanks,
C.
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Peter Maydell <peter.maydell@linaro.org>, Shan Gavin <shan.gavin@gmail.com>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>, "Marc-André Lureau" <marcandre.lureau@gmail.com>, Gavin Shan <gwshan@linux.vnet.ibm.com>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com> <e942cdab-fe1b-fdf4-3b9f-da16a4afa953@kaod.org> <CAJ+F1C+hFfsa5gcSdttTP5J+uyDvNdYJWrm9OJM26+Zc1ZQkew@mail.gmail.com> <cc62e1fd-c564-e1b7-d10c-30665b481352@ozlabs.ru> <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com> <CAFEAcA_g=L2LSo=B_5dpJhJJrqFiOb6sswMVohQwpVGiKi_A7w@mail.gmail.com>
From: "Cédric Le Goater" <clg@kaod.org>
Message-ID: <4ddf6031-0df1-b3b5-965e-a181266e42b0@kaod.org>
Date: Tue, 12 Mar 2019 11:49:21 +0100
> Is the code in question copyright you personally, or copyright
> IBM as your employer at the time ? If the latter, it is IBM that
> would need to approve the relicensing.
That was done. I had our legal team approve the change of license.
Thanks,
C.
From: Shan Gavin <shan.gavin@gmail.com>
Date: Tue, 12 Mar 2019 15:04:54 +0800
Message-ID: <CAOL5TwkQXhPjdPP9v7n7mxAVxbDCSo6MEaG+E-Xys=MoD_pg2g@mail.gmail.com>
Subject: Re: [Qemu-devel] Clearing slirp/ license
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Marc-André Lureau" <marcandre.lureau@gmail.com>, "Cédric Le Goater" <clg@kaod.org>, gwshan@linux.vnet.ibm.com, Peter Maydell <peter.maydell@linaro.org>, Thomas Huth <thuth@redhat.com>, QEMU <qemu-devel@nongnu.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
> Gavin, could you reply that you have no objection in relicensing
> ncsi-pkt.h as 3-Clause BSD?
No objection. Please go ahead with the relicensing.
Cheers,
Gavin
- ncsi.c, ncsi-pkt.h
Subject: Re: Clearing slirp/ license
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>, QEMU <qemu-devel@nongnu.org>, "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
References: <CAJ+F1CKBRNdLPb_wOLhURdUJd-j1RHY2toKSTEhCBt_zs4Xk1w@mail.gmail.com>
From: Thomas Huth <thuth@redhat.com>
Message-ID: <ed5a9f55-f2e5-298d-58ac-414759e9b491@redhat.com>
Date: Wed, 13 Feb 2019 12:30:32 +0100
> Could you reply that you have no objection in relicensing those files
> are 3-Clause BSD?
Ok, for the records: I'm fine if you change the license of dhcpv6.[ch]
to either 3-Clause BSD or 2-Clause BSD.
Thomas
- vmstate.{c,h}
From: Juan Quintela <quintela@redhat.com>
To: "Marc-André Lureau" <marcandre.lureau@gmail.com>
Cc: QEMU <qemu-devel@nongnu.org>, Peter Maydell <peter.maydell@linaro.org>, Samuel Thibault <samuel.thibault@ens-lyon.org>
Subject: Re: Clearing slirp/ license
Date: Tue, 12 Mar 2019 12:43:17 +0100
Message-ID: <87k1h4qpwq.fsf@trasno.org>
> Juan, Could you reply that you have no objection in relicensing the
> vmstate files as 3-Clause BSD?
No problem at all on my side.
Later, Juan.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[ for the NC-SI files ]
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Thomas Huth <thuth@redhat.com>
According to commit 2f5f899631 ("Remove
the advertising clause from the slirp license"), Danny Gasparovski
gave permission to license slirp code under 3-clause BSD license:
Subject: RE: Slirp license
Date: Thu, 8 Jan 2009 10:51:00 +1100
From: "Gasparovski, Daniel" <Daniel.Gasparovski@ato.gov.au>
To: "Richard Fontana" <rfontana@redhat.com>
I have no objection to having Slirp code in QEMU be licensed under
the 3-clause BSD license.
slirp/COPYRIGHT's initial version in 2004 (commit 5fafdf24) listed
only 3 clauses BUT used the poisonous advertising clause for clause 3
which is the controversial clause of non-free 4-clause (that is, it
appears that the BSD-4 license was copied, and then the WRONG clause
was deleted, when creating COPYRIGHT. Perhaps explained as an easy
mistake to make since 3-clause was created by removing clause 3 of the
4-clause, where you sometimes see the three-clause version with
clauses 1, 2, 4; but more commonly see a renumbered version with
clauses 1, 2, 3 to close the gap. If you pay attention only to clause
numbers instead of content, it can be easy to confuse which clause to
delete to go from 4-clause to 3-clause).
Commit 2f5f89963 removed the poisonous wrong clause on
the grounds of moving from 4-clause to 3-clause; but did not add the
missing clause, which makes it LOOK like the 2-clause version. But I
think we have a decent enough trail showing the intent for 3-clause.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
A few fixes that missed -rc0:
* CPU model documentation updates (Daniel P. Berrangé)
* Fix bogus OSPKE warnings (Eduardo Habkost)
* Work around KVM bugs when handing arch_capabilities
(Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----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=Wg+0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-next-pull-request' into staging
x86 queue for -rc1
A few fixes that missed -rc0:
* CPU model documentation updates (Daniel P. Berrangé)
* Fix bogus OSPKE warnings (Eduardo Habkost)
* Work around KVM bugs when handing arch_capabilities
(Eduardo Habkost)
# gpg: Signature made Thu 21 Mar 2019 19:32:02 GMT
# gpg: using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
docs: add note about stibp CPU feature for spectre v2
docs: clarify that spec-ctrl is only needed for Spectre v2
i386: Disable OSPKE on CPU model definitions
i386: Make arch_capabilities migratable
i386: kvm: Disable arch_capabilities if MSR can't be set
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Build fails with gcc 9:
crypto/block-luks.c:689:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
689 | be32_to_cpus(&luks->header.payload_offset);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:690:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
690 | be32_to_cpus(&luks->header.key_bytes);
| ^~~~~~~~~~~~~~~~~~~~~~~
crypto/block-luks.c:691:18: error: taking address of packed member of ‘struct QCryptoBlockLUKSHeader’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
691 | be32_to_cpus(&luks->header.master_key_iterations);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... a bunch of similar errors...
crypto/block-luks.c:1288:22: error: taking address of packed member of ‘struct QCryptoBlockLUKSKeySlot’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
1288 | be32_to_cpus(&luks->header.key_slots[i].stripes);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
All members of the QCryptoBlockLUKSKeySlot and QCryptoBlockLUKSHeader are
naturally aligned and we already check at build time there isn't any
unwanted padding. Drop the QEMU_PACKED attribute.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
TYPE_QAUTHZ is an abstract object of type TYPE_OBJECT. All other
are children of TYPE_QAUTHZ, thus also objects.
Keep INTERFACE_CHECK() for interfaces, and use OBJECT_CHECK() on
objects.
Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We were never reporting the G_IO_HUP event when an end of file was hit
on the websocket channel.
We also didn't report G_IO_ERR when we hit a fatal error processing the
websocket protocol.
The latter in particular meant that the chardev code would not notice
when an eof/error was encountered on the websocket channel, unless the
guest OS happened to trigger a write operation.
This meant that once the first client had quit, the chardev would never
listen to accept a new client.
Fixes launchpad bug 1816819
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While the stibp CPU feature is not commonly used by guest OS for spectre
mitigation due to its performance impact, it is none the less best
practice to expose it to all guest OS. This allows the guest OS to
decide whether to make use or it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The docs currently say that the spec-ctrl feature is needed for both
Spectre variants, but it is only used to address Spectre v2. Also
remove the note about retpolines. The guest OS is usually treated
as a blackbox from host mgmt pov, so it won't have knowledge about
use of retpolines and thus should unconditionally expose spec-ctrl,
allowing the guest to decide whether to use it or not.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190307121838.6345-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the Cascadelake-Server, Icelake-Client, and
Icelake-Server are always generating the following warning:
qemu-system-x86_64: warning: \
host doesn't support requested feature: CPUID.07H:ECX [bit 4]
This happens because OSPKE was never returned by
GET_SUPPORTED_CPUID or x86_cpu_get_supported_feature_word().
OSPKE is a runtime flag automatically set by the KVM module or by
TCG code, was always cleared by x86_cpu_filter_features(), and
was not supposed to appear on the CPU model table.
Remove the OSPKE flag from the CPU model table entries, to avoid
the bogus warning and avoid returning invalid feature data on
query-cpu-* QMP commands. As OSPKE was always cleared by
x86_cpu_filter_features(), this won't have any guest-visible
impact.
Include a test case that should detect the problem if we introduce
a similar bug again.
Fixes: c7a88b52f6 ("i386: Add new model of Cascadelake-Server")
Fixes: 8a11c62da9 ("i386: Add new CPU model Icelake-{Server,Client}")
Cc: Tao Xu <tao3.xu@intel.com>
Cc: Robert Hoo <robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190319200515.14999-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Now that kvm_arch_get_supported_cpuid() will only return
arch_capabilities if QEMU is able to initialize the MSR properly,
we know that the feature is safely migratable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-3-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM has two bugs in the handling of MSR_IA32_ARCH_CAPABILITIES:
1) Linux commit commit 1eaafe91a0df ("kvm: x86: IA32_ARCH_CAPABILITIES
is always supported") makes GET_SUPPORTED_CPUID return
arch_capabilities even if running on SVM. This makes "-cpu
host,migratable=off" incorrectly expose arch_capabilities on CPUID on
AMD hosts (where the MSR is not emulated by KVM).
2) KVM_GET_MSR_INDEX_LIST does not return MSR_IA32_ARCH_CAPABILITIES if
the MSR is not supported by the host CPU. This makes QEMU not
initialize the MSR properly at kvm_put_msrs() on those hosts.
Work around both bugs on the QEMU side, by checking if the MSR
was returned by KVM_GET_MSR_INDEX_LIST before returning the
feature flag on kvm_arch_get_supported_cpuid().
This has the unfortunate side effect of making arch_capabilities
unavailable on hosts without hardware support for the MSR until bug #2
is fixed on KVM, but I can't see another way to work around bug #1
without that side effect.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190125220606.4864-2-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- mirror: Fix early return from drain (could cause deadlocks)
- vmdk: Fixed probing for version 3 images
- vl: Fix to create migration object before block backends again (fixes
segfault for block drivers that set migration blockers)
- Several minor fixes, documentation and test case improvements
-----BEGIN PGP SIGNATURE-----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=GcJ/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- mirror: Fix early return from drain (could cause deadlocks)
- vmdk: Fixed probing for version 3 images
- vl: Fix to create migration object before block backends again (fixes
segfault for block drivers that set migration blockers)
- Several minor fixes, documentation and test case improvements
# gpg: Signature made Tue 19 Mar 2019 14:59:17 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
qemu-iotests: Treat custom TEST_DIR in 051
blockdev: Check @replaces in blockdev_mirror_common
block: Make bdrv_{copy_on_read,crypto_luks,replication} static
blockjob: fix user pause in block_job_error_action
qemu-iotests: Fix 232 for non-qcow2
vl: Fix to create migration object before block backends again
iotests: 153: Wait for an answer to QMP commands
block: Silence Coverity in bdrv_drop_intermediate()
vmdk: Support version=3 in VMDK descriptor files
qapi: fix block-latency-histogram-set description and examples
qcow2: Fix data file error condition in qcow2_co_create()
mirror: Confirm we're quiesced only if the job is paused or cancelled
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug on FreeBSD when doing a migration.
-----BEGIN PGP SIGNATURE-----
iQFOBAABCgA4FiEE+AwAYwjiLP2KkueYDPVXL9f7Va8FAlyRDYcaHGFudGhvbnku
cGVyYXJkQGNpdHJpeC5jb20ACgkQDPVXL9f7Va9JcAf+JZAEjaZOMmrtC5/J6Uqn
d7lI4+heGZmlkC67iJz/x0xL07G+ZJfKs/4m8xTSxLtil0KMluUMwr2PkPnoT+5m
xrjxlFunhfcjWhj18/VkJVvHzD8s7kqxVX3N2WGc+9MKbqzhjw++NG8tLG60n2Gf
r1IqlNex8fDiAQkZyIlGn9lQsyWYtvx+JxR1jVjZFY9cZZpTGo3qWA7fqDfkbqKQ
a+brlcNnMjcmmslfmjD2vJu/MJ+W3P0kXRJDhVKzFRQuMviv8Phnb+WjBVz591IR
opvTAFW9RMb4sc/V0V5KcaMTzpTpHYuozSkrdXiPwNJRu3gPu7uyfYr0HRuXj1rZ
pA==
=nPro
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20190319' into staging
Xen queue
Fix a bug on FreeBSD when doing a migration.
# gpg: Signature made Tue 19 Mar 2019 15:40:55 GMT
# gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF
# gpg: issuer "anthony.perard@citrix.com"
# gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [marginal]
# gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8
# Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF
* remotes/aperard/tags/pull-xen-20190319:
xen-mapcache: use MAP_FIXED flag so the mmap address hint is always honored
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Or if it's not possible to honor the hinted address an error is returned
instead. This makes it easier to spot the actual failure, instead of
failing later on when the caller of xen_remap_bucket realizes the
mapping has not been created at the requested address.
Also note that at least on FreeBSD using MAP_FIXED will cause mmap to
try harder to honor the passed address.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Igor Druzhinin <igor.druzhinin@cirtix.com>
Message-Id: <20190318173731.14494-1-roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
There is no reason why the constraints we put on @replaces should be
limited to drive-mirror. Therefore, move the sanity checks from
qmp_drive_mirror() to blockdev_mirror_common() so they apply to
blockdev-mirror as well.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Job (especially mirror) may call block_job_error_action several
times before actual pause if it has several in-flight requests.
block_job_error_action will call job_pause more than once in this case,
which lead to following block-job-resume qmp command can't actually
resume the job.
Fix it by do not increase pause level in block_job_error_action if
user_paused already set.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
232 is marked as generic, but commit 12efe428c9 added code that assumes
qcow2. What the new test really needs is backing files and support for
updating the backing file link (.bdrv_change_backing_file).
Split the non-generic code into a new test case 247 and make it work
with qed, too.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recent commit cda4aa9a5a moved block backend creation before machine
property evaluation. This broke qemu-iotests 055. Turns out we need
to create the migration object before block backends, so block
backends can add migration blockers. Fix by calling
migration_object_init() earlier, right before configure_blockdev().
Fixes: cda4aa9a5a
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are various actions in this test that must be executed
sequentially, as the result of it depends on the state triggered by the
previous one.
If the last argument of _send_qemu_cmd() is an empty string, it just
sends the QMP commands without waiting for an answer. While unlikely, it
may happen that the next action in the test gets invoked before QEMU
processes the QMP request.
This issue seems to be easier to reproduce on servers with limited
resources or highly loaded.
With this change, we wait for an answer on all _send_qemu_cmd() calls.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Coverity doesn't like that the return value of bdrv_check_update_perm()
stays unused only in this place (CID 1399710).
Even if checking local_err should be equivalent to checking ret < 0,
let's switch to using the return value to be more consistent (and in
case of a bug somewhere down the call chain, forgetting to assign errp
is more likely than returning 0 for an error case).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Commit 509d39aa22 added support for read
only VMDKs of version 3.
This commit fixes the probe function to correctly handle descriptors of
version 3.
This commit has two effects:
1. We no longer need to supply '-f vmdk' when pointing to descriptor
files of version 3 in qemu/qemu-img command line arguments.
2. This fixes the scenario where a VMDK points to a parent version 3
descriptor file which is being probed as "raw" instead of "vmdk".
Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There no @device parameter, only the @id one.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We were trying to check whether bdrv_open_blockdev_ref() returned
success, but accidentally checked the wrong variable. Spotted by
Coverity (CID 1399703).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
While child_job_drained_begin() calls to job_pause(), the job doesn't
actually transition between states until it runs again and reaches a
pause point. This means bdrv_drained_begin() may return with some jobs
using the node still having 'busy == true'.
As a consequence, block_job_detach_aio_context() may get into a
deadlock, waiting for the job to be actually paused, while the coroutine
servicing the job is yielding and doesn't get the opportunity to get
scheduled again. This situation can be reproduced by issuing a
'block-commit' immediately followed by a 'device_del'.
To ensure bdrv_drained_begin() only returns when the jobs have been
paused, we change mirror_drained_poll() to only confirm it's quiesced
when job->paused == true and there aren't any in-flight requests, except
if we reached that point by a drained section initiated by the
mirror/commit job itself.
The other block jobs shouldn't need any changes, as the default
drained_poll() behavior is to only confirm it's quiesced if the job is
not busy or completed.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch set contains three major sources of bug fixes:
* Jim has added support for GDB XML files, as well as fixing access to
CSRs via the GDB stub.
* Alistair has rebased a large set of fixes from Michael that were still
in his patch queue. These fix bugs all over our tree, including:
* Logging of PMP errors.
* User ABI cleanups and fixes, most notably on RVE guests.
* Fixes for interrupt emulation fidelity.
* Improvements to the emulation fidelity of the sifive_u machine.
* Bin Meng has improved the emulation fidelity of the SiFive UART, which
now supports both TX and RX interrupts (as well as setting the correct
interrupt line).
-----BEGIN PGP SIGNATURE-----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=365E
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.0-rc0-2' into staging
RISC-V Patches for 4.0-rc0, Part 2
This patch set contains three major sources of bug fixes:
* Jim has added support for GDB XML files, as well as fixing access to
CSRs via the GDB stub.
* Alistair has rebased a large set of fixes from Michael that were still
in his patch queue. These fix bugs all over our tree, including:
* Logging of PMP errors.
* User ABI cleanups and fixes, most notably on RVE guests.
* Fixes for interrupt emulation fidelity.
* Improvements to the emulation fidelity of the sifive_u machine.
* Bin Meng has improved the emulation fidelity of the SiFive UART, which
now supports both TX and RX interrupts (as well as setting the correct
interrupt line).
# gpg: Signature made Tue 19 Mar 2019 12:42:11 GMT
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41
* remotes/palmer/tags/riscv-for-master-4.0-rc0-2:
riscv: sifive_u: Correct UART0's IRQ in the device tree
riscv: sifive_uart: Generate TX interrupt
target/riscv: Remove unused struct
riscv: sifive_u: Allow up to 4 CPUs to be created
RISC-V: Update load reservation comment in do_interrupt
RISC-V: Convert trap debugging to trace events
RISC-V: Add support for vectored interrupts
RISC-V: Change local interrupts from edge to level
RISC-V: linux-user support for RVE ABI
elf: Add RISC-V PSABI ELF header defines
RISC-V: Remove unnecessary disassembler constraints
RISC-V: Allow interrupt controllers to claim interrupts
RISC-V: Replace __builtin_popcount with ctpop8 in PLIC
riscv: pmp: Log pmp access errors as guest errors
RISC-V: Add hooks to use the gdb xml files.
RISC-V: Add debug support for accessing CSRs.
RISC-V: Fixes to CSR_* register macros.
RISC-V: Add 64-bit gdb xml files.
RISC-V: Add 32-bit gdb xml files.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The UART0's interrupt vector is wrongly set to 1 in the device tree.
Use SIFIVE_U_UART0_IRQ instead.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At present the sifive uart model only generates RX interrupt. This
updates it to generate TX interrupt so that it is more useful.
Note the TX fifo is still unimplemented.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If vectored interrupts are enabled (bits[1:0]
of mtvec/stvec == 1) then use the following
logic for trap entry address calculation:
pc = mtvec + cause * 4
In addition to adding support for vectored interrupts
this patch simplifies the interrupt delivery logic
by making sync/async cause decoding and encoding
steps distinct.
The cause code and the sign bit indicating sync/async
is split at the beginning of the function and fixed
cause is renamed to cause. The MSB setting for async
traps is delayed until setting mcause/scause to allow
redundant variables to be eliminated. Some variables
are renamed for conciseness and moved so that decls
are at the start of the block.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This effectively changes riscv_cpu_update_mip
from edge to level. i.e. cpu_interrupt or
cpu_reset_interrupt are called regardless of
the current interrupt level.
Fixes WFI doesn't return when a IPI is issued:
- https://github.com/riscv/riscv-qemu/issues/132
To test:
1) Apply RISC-V Linux CPU hotplug patch:
- http://lists.infradead.org/pipermail/linux-riscv/2018-May/000603.html
2) Enable CONFIG_CPU_HOTPLUG in linux .config
3) Try to offline and online cpus:
echo 1 > /sys/devices/system/cpu/cpu2/online
echo 0 > /sys/devices/system/cpu/cpu2/online
echo 1 > /sys/devices/system/cpu/cpu2/online
Reported-by: Atish Patra <atishp04@gmail.com>
Cc: Atish Patra <atishp04@gmail.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This change checks elf_flags for EF_RISCV_RVE and if
present uses the RVE linux syscall ABI which uses t0
for the syscall number instead of a7.
Warn and exit if a non-RVE ABI binary is run on a
cpu with the RVE extension as it is incompatible.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Co-authored-by: Kito Cheng <kito.cheng@gmail.com>
Co-authored-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>