Usually, eliminate an operation from the translator by combining
a shift with an extract.
In the case of gen_set_NZ64, we don't need a boolean value for cpu_ZF,
merely a non-zero value. Given that we can extract both halves of a
64-bit input in one call, this simplifies the code.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-12-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-11-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For !SF, this initial ext32u can't be optimized away by the
current TCG code generator. (It would require backward bit
liveness propagation.)
But since the range of bits for !SF are already constrained by
unallocated_encoding, we'll never reference the high bits anyway.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-10-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are all special case aliases of UBFM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-9-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These are all special case aliases of SBFM.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-8-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-7-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This can allow much of a ccmp to be elided when particular
flags are subsequently dead.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-6-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-5-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handling this with TCG_COND_ALWAYS will allow these unlikely
cases to be handled without special cases in the rest of the
translator. The TCG optimizer ought to be able to reduce
these ALWAYS conditions completely.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split arm_gen_test_cc into 3 functions, so that it can be reused
for non-branch TCG comparisons.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is a bug fix for aarch64. At present, we have branches using
the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags
using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F. From
the view of the TCG code generator, these are unrelated variables.
The bug is hard to see because we currently only read these variables
from branches, and upon reaching a branch TCG will first spill live
variables and then reload the arguments of the branch. Since the
32-bit versions were never live until reaching the branch, we'd re-read
the data that had just been spilled from the 64-bit versions.
There is currently no such problem with the cpu_exclusive_* variables,
but there's no point in tempting fate.
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The errp and err variable have unnecessary brackets around them,
so remove the brackets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 9900393572b63f2ec3d68785ca98193d81e0ac71.1441758563.git.alistair.francis@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If host and target endianness does not match, loding an initramfs does not work.
Fix by writing boot parameters with appropriate endianness conversion.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SH4 shad instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SH4 shld instruction can shift in both direction, depending on the
sign of the shift. This is currently implemented using branches, which
is not really efficient and prevents the optimizer to do its job. In
practice it is often used with a constant loaded in a register just
before.
Simplify the implementation by computing both the value shifted to the
left and to the right, and then selecting the correct one with a
movcond. As with a negative value the shift amount can go up to 32 which
is undefined, we shift the value in two steps.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Instead of testing bytes one by one, we can use the following trick
from https://graphics.stanford.edu/~seander/bithacks.html:
haszero(v) = (v - 0x01010101) & ~v & 0x80808080
The subexpression v - 0x01010101, evaluates to a high bit set in any
byte whenever the corresponding byte in v is zero or greater than 0x80.
The sub-expression ~v & 0x80808080 evaluates to high bits set in bytes
where the byte of v doesn't have its high bit set (so the byte was less
than 0x80). Finally, by ANDing these two sub-expressions the result is
the high bits set where the bytes in v were zero, since the high bits
set due to a value greater than 0x80 in the first sub-expression are
masked off by the second.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Most floating point helpers can trigger an exception, but don't change
the globals. Mark these helpers as TCG_CALL_NO_WG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a brief comment describing how to use the debug support
from GDB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-5-git-send-email-peter.maydell@linaro.org
SIGUSR1 is QEMU's IPI signal, and it gets sent a lot, so is
best silently passed through to the guest without stopping.
Make qemu-gdb.py do this bit of configuration for the user.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-4-git-send-email-peter.maydell@linaro.org
Split the implementation of CoroutineCommand into its own file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-3-git-send-email-peter.maydell@linaro.org
As we add more commands to our Python gdb debugging support, it's
going to get unwieldy to have everything in a single file. Split
the implementation of the 'mtree' command from qemu-gdb.py into
its own module.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1439574392-4403-2-git-send-email-peter.maydell@linaro.org
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This one just syncs x86_64 and i386.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The legacy<> type is no longer used since 7ce7ffe02.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
cur and buf are pointers, so the difference is a ptrdiff_t
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Warnings from the Sparse static analysis tool:
linux-user/main.c:40:12: warning:
symbol 'filename' was not declared. Should it be static?
linux-user/main.c:41:12: warning:
symbol 'argv0' was not declared. Should it be static?
linux-user/main.c:42:5: warning:
symbol 'gdbstub_port' was not declared. Should it be static?
linux-user/main.c:43:11: warning:
symbol 'envlist' was not declared. Should it be static?
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This will let us print options in a format that the user would actually
write it on the command line (foo=bar,baz=asd,etc=def), without
prepending a spurious comma at the beginning of the list, or quoting
values unnecessarily. This patch provides the following changes:
* write and id=, if the option has an id
* do not print separator before the first element
* do not quote string arguments
* properly escape commas (,) for QEMU
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
For consistency with the rest of the comment blocks.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Minor cleanup.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
My Coccinelle semantic patch finds a few more, because it also fixes up
the equally pointless conditional
if (foo) {
free(foo);
foo = NULL;
}
Result (feel free to squash it into your patch):
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The free() and g_free() functions both happily accept
NULL on any platform QEMU builds on. As such putting a
conditional 'if (foo)' check before calls to 'free(foo)'
merely serves to bloat the lines of code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
A number of files were including strings.h but not using any
of the functions it provides
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>