The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Many source files have doubled words (eg "the the", "to to",
and so on). Most of these can simply be removed, but a couple
were actual mis-spellings (eg "to to" instead of "to do").
There was even one triple word score "to to to" :-)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=7+ii
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-2015-09-10-tag' into staging
xen-2015-09-10
# gpg: Signature made Thu 10 Sep 2015 17:52:08 BST using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-2015-09-10-tag: (29 commits)
xen/pt: Don't slurp wholesale the PCI configuration registers
xen/pt: Check for return values for xen_host_pci_[get|set] in init
xen/pt: Move bulk of xen_pt_unregister_device in its own routine.
xen/pt: Make xen_pt_unregister_device idempotent
xen/pt: Log xen_host_pci_get/set errors in MSI code.
xen/pt: Log xen_host_pci_get in two init functions
xen/pt: Remove XenPTReg->data field.
xen/pt: Check if reg->init function sets the 'data' past the reg->size
xen/pt: Sync up the dev.config and data values.
xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.config
xen/pt: Use XEN_PT_LOG properly to guard against compiler warnings.
xen/pt/msi: Add the register value when printing logging and error messages
xen: use errno instead of rc for xc_domain_add_to_physmap
xen/pt: xen_host_pci_config_read returns -errno, not -1 on failure
xen/pt: Make xen_pt_msi_set_enable static
xen/pt: Update comments with proper function name.
xen/HVM: atomically access pointers in bufioreq handling
xen-hvm: When using xc_domain_add_to_physmap also include errno when reporting
xen, gfx passthrough: add opregion mapping
xen, gfx passthrough: register host bridge specific to passthrough
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bjta
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2015-09-10' into staging
error: On abort, report where the error was created
# gpg: Signature made Thu 10 Sep 2015 13:01:39 BST using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-error-2015-09-10:
error: On abort, report where the error was created
error: Revamp interface documentation
error: error_set_errno() is unused, drop
qga/vss-win32: Document the DLL requires non-null errp
qga: Clean up unnecessarily dirty casts
error: Make error_setg() a function
error: De-duplicate code creating Error objects
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Xen 4.6 commit cd2f100f0f61b3f333d52d1737dd73f02daee592
"libxc: Fix do_memory_op to return negative value on errors"
made the libxc API less odd-ball: On errors, return value is
-1 and error code is in errno. On success the return value
is either 0 or an positive value.
Since we could be running with an old toolstack in which the
Exx value is in rc or the newer, we add an wrapper around
the xc_domain_add_to_physmap (called xen_xc_domain_add_to_physmap)
which will always return the EXX.
Xen 4.6 did not change the libxc functions mentioned (same parameters)
so we piggyback on the fact that Xen 4.6 has a new function:
commit 504ed2053362381ac01b98db9313454488b7db40 "tools/libxc: Expose
new hypercall xc_reserved_device_memory_map" and check for that.
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Suggested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The number of slots per page being 511 (i.e. not a power of two) means
that the (32-bit) read and write indexes going beyond 2^32 will likely
disturb operation. The hypervisor side gets I/O req server creation
extended so we can indicate that we're using suitable atomic accesses
where needed, allowing it to atomically canonicalize both pointers when
both have gone through at least one cycle.
The Xen side counterpart (which is not a functional prereq to this
change, albeit a build one) went in already (commit b7007bc6f9).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Currently IGD drivers always need to access PCH by 1f.0. But we
don't want to poke that directly to get ID, and although in real
world different GPU should have different PCH. But actually the
different PCH DIDs likely map to different PCH SKUs. We do the
same thing for the GPU. For PCH, the different SKUs are going to
be all the same silicon design and implementation, just different
features turn on and off with fuses. The SW interfaces should be
consistent across all SKUs in a given family (eg LPT). But just
same features may not be supported.
Most of these different PCH features probably don't matter to the
Gfx driver, but obviously any difference in display port connections
will so it should be fine with any PCH in case of passthrough.
So currently use one PCH version, 0x8c4e, to cover all HSW(Haswell)
scenarios, 0x9cc3 for BDW(Broadwell).
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
We will try to reuse assign_dev_load_option_rom in xen side, and
especially its a good beginning to unify pci assign codes both on
kvm and xen in the future.
[Fix build for Windows]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Implement a pci host bridge specific to passthrough. Actually
this just inherits the standard one. And we also just expose
a minimal real host bridge pci configuration subset.
[Replace pread with lseek and read to fix Windows build]
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This is particularly useful when we abort in error_propagate(),
because there the stack backtrace doesn't lead to where the error was
created. Looks like this:
Unexpected error in parse_block_error_action() at .../qemu/blockdev.c:322:
qemu-system-x86_64: -drive if=none,werror=foo: 'foo' invalid write error action
Aborted (core dumped)
Note: to get this example output, I monkey-patched drive_new() to pass
&error_abort to blockdev_init().
To keep the error handling boiler plate from growing even more, all
error_setFOO() become macros expanding into error_setFOO_internal()
with additional __FILE__, __LINE__, __func__ arguments. Not exactly
pretty, but it works.
The macro trickery breaks down when you take the address of an
error_setFOO(). Fortunately, we do that in just one place: qemu-ga's
Windows VSS provider and requester DLL wants to call
error_setg_win32() through a function pointer "to avoid linking glib
to the DLL". Use error_setg_win32_internal() there. The use of the
function pointer is already wrapped in a macro, so the churn isn't
bad.
Code size increases by some 35KiB for me (0.7%). Tolerable. Could be
less if we passed relative rather than absolute source file names to
the compiler, or forwent reporting __func__.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
qga_vss_fsfreeze() casts error_set_win32() from
void (*)(Error **, int, ErrorClass, const char *, ...)
to
void (*)(void **, int, int, const char *, ...)
The result is later called. Since the two types are not compatible,
the call is undefined behavior. It works in practice anyway.
However, there's no real need for trickery here. Clean it up as
follows:
* Declare struct Error, and fix the first parameter.
* Switch to error_setg_win32(). This gets rid of the troublesome
ErrorClass parameter. Requires converting error_setg_win32() from
macro to function, but that's trivially easy, because this is the
only user of error_set_win32().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
it will prevent guests on old machines from seeing
inconsistent memory mapping in firmware/ACPI views.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit ef546f1275 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove arguments that can be found in PCMachineState.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Connect the Sysbus AHCI device to ZynqMP.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com>
[PMM: removed unnecessary brackets in error_propagate call]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If we directly boot a kernel in NonSecure on a system where the GIC
supports the security extensions then we must cause the GIC to
configure its interrupts into group 1 (NonSecure) rather than the
usual group 0, and with their initial priority set to the highest
NonSecure priority rather than the usual highest Secure priority.
Otherwise the guest kernel will be unable to use any interrupts.
Implement this behaviour, controlled by a flag which we set if
appropriate when the ARM bootloader code calls our ARMLinuxBootIf
interface callback.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-4-git-send-email-peter.maydell@linaro.org
For ARM we have a little minimalist bootloader in hw/arm/boot.c which
takes the place of firmware if we're directly booting a Linux kernel.
Unfortunately a few devices need special case handling in this situation
to do the initialization which on real hardware would be done by
firmware. (In particular if we're booting a kernel in NonSecure state
then we need to make a TZ-aware GIC put all its interrupts into Group 1,
or the guest will be unable to use them.)
Create a new QOM interface which can be implemented by devices which
need to do something different from their default reset behaviour.
The callback will be called after machine initialization and before
first reset.
Suggested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-3-git-send-email-peter.maydell@linaro.org
Useful for iterating through an entire QOM subtree.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441383782-24378-2-git-send-email-peter.maydell@linaro.org
The running_irq and last_active arrays represent state which
doesn't exist in a real hardware GIC. The only thing we use
them for is updating the running priority when an interrupt
is completed, but in fact we can use the active-priority
registers to do this. The running priority is always the
priority corresponding to the lowest set bit in the active
priority registers, because only one interrupt at any
particular priority can be active at once.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1438089748-5528-5-git-send-email-peter.maydell@linaro.org
A GICv2 has both GICC_APR<n> and GICC_NSAPR<n> registers, with
the latter holding the active priority bits for Group 1 interrupts
(usually Nonsecure interrupts), and the Nonsecure view of the
GICC_APR<n> is the second half of the GICC_NSAPR<n> registers.
Turn our half-hearted implementation of APR<n> into a proper
implementation of both APR<n> and NSAPR<n>:
* Add the underlying state for NSAPR<n>
* Make sure APR<n> aren't visible for pre-GICv2
* Implement reading of NSAPR<n>
* Make non-secure reads of APR<n> behave correctly
* Implement writing to APR<n> and NSAPR<n>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1438089748-5528-4-git-send-email-peter.maydell@linaro.org
IGD passthrough wants to supply a different pci and
host devices, inheriting i440fx devices. Make types
configurable.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
- various bugfixes (css/event-facility)
- more efficient adapter interrupt routes setup
- gdb enhancement
- sclp got treated with a lot of remodelling/cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Ax4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20150907' into staging
s390x fixes and improvements:
- various bugfixes (css/event-facility)
- more efficient adapter interrupt routes setup
- gdb enhancement
- sclp got treated with a lot of remodelling/cleanup
# gpg: Signature made Mon 07 Sep 2015 15:42:43 BST using RSA key ID C6F02FAF
# gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
* remotes/cohuck/tags/s390x-20150907: (23 commits)
s390/sclp: simplify calculation of rnmax
s390/sclp: store the increment_size in the sclp device
s390: unify allocation of initial memory
s390: move memory calculation into the sclp device
s390/sclp: ignore memory hotplug operations if it is disabled
s390: disallow memory hotplug for the s390-virtio machine
s390: no need to manually parse for slots and maxmem
s390/sclp: move sclp_service_interrupt into the sclp device
s390/sclp: move sclp_execute related functions into the SCLP class
s390/sclp: introduce a root sclp device
s390/sclp: temporarily fix unassignment/reassignment of memory subregions
s390/sclp: replace sclp event types with proper defines
s390/sclp: rework sclp event facility initialization + device realization
sclp/s390: rework sclp cpu hotplug device notification
s390x/gdb: support reading/writing of control registers
s390x/kvm: make setting of in-kernel irq routes more efficient
pc-bios/s390-ccw: rebuild image
pc-bios/s390-ccw: Device detection in higher subchannel sets
s390x/event-facility: fix location of receive mask
s390x/css: start with cleared cstat/dstat
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Let's calculate it once and reuse it.
Suggested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's make that function a method of the new sclp device, keeping
the wrapper for existing users.
We can now let go of get_event_facility().
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's move the sclp_execute related functions into the SCLP class
and pass the device state as parameter, so we have easy access to
the SCLPDevice later on.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Let's create a root sclp device, which has other sclp devices as
children (e.g. the event facility for now) and can later be used
for migration of sclp specific attributes and setup of memory.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Introduce TYPE_SCLP_QUIESCE and make use of it. Also use
TYPE_SCLP_CPU_HOTPLUG where applicable.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The current code only works by chance. The event facility is a sysbus
device, but specifies in its class structure as parent the DeviceClass
(instead of a device class).
The init function in return lies therefore at the same position as
the init function of SysBusDeviceClass and gets triggered instead -
a very bad idea of doing that (e.g. the parameter types don't match).
Let's bring the initialization code up to date, initializing the event
facility + child events in .instance_init and moving the realization of
the child events out of the init call, into the realization step.
Device realization is now automatically performed when the event facility
itself is realized. That realization implicitly triggers realization of
the child bus, which in turn initializes the events.
Please note that we have to manually propagate the realization of the bus
children, common code still has a TODO set for that task.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
For read event mask, we assumed that the layout of the sccb was
|sccb header|event buffer header|receive mask|...|
The correct layout, however, is
|sccb header|receive mask|...|
as in-buffer and
|sccb header|event buffer header|...|
as out-buffer.
Fix this: This makes selective read work.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Since the pow2floor() function is now used in a hot code path,
make it inline; for consistency, provide pow2ceil() as an inline
function too.
Because these functions use ctz64() we have to put the inline
versions into host-utils.h, so they have access to ctz64(),
and move the inline is_power_of_2() along with them.
We then need to include host-utils.h from qemu-common.h so that
the files which use these functions via qemu-common.h still have
access to them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1437741192-20955-7-git-send-email-peter.maydell@linaro.org
This is using a ds1338 RTC chip on the I2C bus. This RTC chip is
not present on the real 3DS PDK board.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Acked-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 05601683a2a95c881cbc9f22651a044d969bd0ae.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The slave mode is not implemented.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Convert the KZM board to use the i.MX31 SoC defintition instead of
redefining the entire SoC on the machine level. Major rewrite of the
machine init code.
While touching the memory map comment de-indent to the correct level
of indentation.
This obsoletes the legacy i.MX device device creation helpers which are removed.
Tested by booting a minimal Linux system on the emulated platform
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 5e783561f092e1c939562fdff001f1ab1194b07f.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
