Introduce a function, rtc_policy_slew_deliver_irq(), which delivers
irq if LOST_TICK_POLICY_SLEW is used, as which is only supported on
x86, other platforms call it will trigger a assert
After that, we can move the x86 specific code to the common place
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-6-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the code purely depends on LOST_TICK_POLICY_SLEW, we can simply
drop '#ifdef TARGET_I386' as only x86 can enable this tick policy
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-5-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Any tick policy specified on other platforms rather on TARGET_I386
will fall back to LOST_TICK_POLICY_DISCARD silently, this patch makes
sure only TARGET_I386 can enable LOST_TICK_POLICY_SLEW
After that, we can enable LOST_TICK_POLICY_SLEW in the common code
which need not use '#ifdef TARGET_I386' to make these code be x86
specific anymore
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-4-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are two issues in current code:
1) If the period is changed by re-configuring RegA, the coalesced
irq will be scaled to reflect the new period, however, it
calculates the new interrupt number like this:
s->irq_coalesced = (s->irq_coalesced * s->period) / period;
There are some clocks will be lost if they are not enough to
be squeezed to a single new period that will cause the VM clock
slower
In order to fix the issue, we calculate the interrupt window
based on the precise clock rather than period, then the clocks
lost during period is scaled can be compensated properly
2) If periodic_timer_update() is called due to RegA reconfiguration,
i.e, the period is updated, current time is not the start point
for the next periodic timer, instead, which should start from the
last interrupt, otherwise, the clock in VM will become slow
This patch takes the clocks from last interrupt to current clock
into account and compensates the clocks for the next interrupt,
especially if a complete interrupt was lost in this window, the
time can be caught up by LOST_TICK_POLICY_SLEW
Signed-off-by: Tai Yunfang <yunfangtai@tencent.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-3-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, the timer is updated whenever RegA or RegB is written
even if the periodic timer related configuration is not changed
This patch optimizes it slightly to make the update happen only
if its period or enable-status is changed, also later patches are
depend on this optimization
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Message-Id: <20170510083259.3900-2-xiaoguangrong@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJZNhgSAAoJEGw4ysog2bOSERwP/A7T7UJ8XXWit9QXGCi+G83w
+RUuHxjA9qFqrg1zYqFyLg3ctGl93Sxu7mzI5MOIKwAVXlTsE6+84TH7zBc18DPB
fekPWmzJ6jfiVO+1Zg1JPWorMfIHDDc2v6Q6qPfD8KWbt02yPfrXbKlivQB4hVZ4
Qb4VJdjZgBDcVy79xhcW5k6v8dVw8PdSyDmkQrBhccI0noLerhI41Mgt7QQaWQRH
Le3ziexUpWelVCRQB0FqE/PIWo2+NY/e0pumX7Aqtjs/G35KjOXy0ja3yKLjfeUW
Z4NugIO2I2hncERa68YFar/BqG26DX8KCErNMDkn7LyZcoDAQWhcDH+65G1BNuf2
jW+KApMNm+N1vXabbz8P9BbLjuZpRQQhyPOxB3I8UGaTYGtCPe/lUCe2/V8EbKNa
VFavc1UuLftOZuJj/rYGJeU/4JBU6srbAKCO3VVK4Tnd8DyiT3QCpUWEkjv+J6jo
co35oYBavLfQPMr+rsX15lgbmZwg7iBV+dgKLa2+cwmKXzCf7aYe38aJy7nRBmhb
ivhH3bKtdysy0qq4UYaCgW06qQcVF0QMJaxFQ0X7I+GBNwHA7wdZD/i6IMcO6Z7H
7gQdavBTdukgKb2+pVjR58H13ieHXuBxktonhOz70rvEDVa4xx8pxhnZlpSiH2ha
RzpkhanrwEeECG6Lke/3
=QDWB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.10-20170606' into staging
ppc patch queue 2017-06-06
Accumulated patches for ppc targets and the pseries machine type.
The big thing in this batch is a start on a substantial cleanup of the
pseries hotplug mechanisms, which were pretty confusing. For now
these shouldn't cause substantial behavioural changes, but I am hoping
these lead to clearer code and eventually to fixes for the bugs we
have in hotplug handling, particularly when hotplug and migration are
combined.
The remaining patches are mostly bugfixes.
# gpg: Signature made Tue 06 Jun 2017 03:48:50 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.10-20170606:
spapr: Remove some non-useful properties on DRC objects
spapr: Eliminate spapr_drc_get_type_str()
spapr: Move configure-connector state into DRC
spapr: Clean up spapr_dr_connector_by_*()
spapr: Introduce DRC subclasses
spapr/drc: don't migrate DRC of cold-plugged CPUs and LMBs
spapr: Allow boot from vhost-*-scsi backends
ppc/pnv: check the return value of fdt_setprop()
spapr_nvram: Check return value from blk_getlength()
target/ppc: Fixup set_spr error in h_register_process_table
target-ppc: Fix openpic timer read register offset
spapr: Make DRC get_index and get_type methods into plain functions
spapr: Abolish DRC set_configured method
spapr: Abolish DRC get_fdt method
spapr: Move DRC RTAS calls into spapr_drc.c
migration: Mark CPU states dirty before incoming migration/loadvm
migration: remove register_savevm()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In semihosting mode QEMU allows guest to read and write host file
descriptors directly, including descriptors 0..2, a.k.a. stdin, stdout
and stderr. Sometimes it's desirable to have semihosting console
controlled by -serial option, e.g. to connect it to network.
Add semihosting console to xtensa-semi.c, open it in the 'sim' machine
in the presence of -serial option and direct stdout and stderr to it
when it's present.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-----BEGIN PGP SIGNATURE-----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=0C6J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging
x86 and machine queue, 2017-06-05
# gpg: Signature made Mon 05 Jun 2017 19:58:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-and-machine-pull-request:
scripts: Test script to look for -device crashes
qemu.py: Add QEMUMachine.exitcode() method
qemu.py: Don't set _popen=None on error/shutdown
spapr: cleanup spapr_fixup_cpu_numa_dt() usage
numa: move numa_node from CPUState into target specific classes
numa: make hmp 'info numa' fetch numa nodes from qmp_query_cpus() result
numa: make sure that all cpus have has_node_id set if numa is enabled
numa: move default mapping init to machine
numa: consolidate cpu_preplug fixups/checks for pc/arm/spapr
pc: Use "min-[x]level" on compat_props
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* 'connector_type' is easily derived from the 'index' property, so there's
no point to it (it's also implicit in the QOM type of the DRC)
* 'isolation-state', 'indicator-state' and 'allocation-state' are
part of the transaction between qemu and guest during PAPR hotplug
operations, and outside tools really have no business looking at it
(especially not changing, and these were RW properties)
* 'entity-sense' is basically just a weird PAPR encoding of whether there
is a device connected to this DRC
Strictly speaking removing these properties is breaking the qemu interface.
However, I'm pretty sure no management tools have ever used these. For
debugging there are better alternatives. Therefore, I think removing these
broken interfaces is the better option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This function was used in generating the device tree. However, now that
we have different QOM types for different DRC types we can easily store
the information we need in the class structure and avoid this specialized
lookup function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently the sPAPRMachineState contains a list of sPAPRConfigureConnector
structures which store intermediate state for the ibm,configure-connector
RTAS call.
This was an attempt to separate this state from the core of the DRC state.
However the configure connector process is intimately tied to the DRC
model, so there's really no point trying to have two levels of interface
here.
Moving the configure-connector state into its corresponding DRC allows
removal of a number of helpers for maintaining the anciliary list.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* Change names to something less ludicrously verbose
* Now that we have QOM subclasses for the different DRC types, use a QOM
typename instead of a PAPR type value parameter
The latter allows removal of the get_type_shift() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we only have a single QOM type for all DRCs, but lots of
places where we switch behaviour based on the DRC's PAPR defined type.
This is a poor use of our existing type system.
So, instead create QOM subclasses for each PAPR defined DRC type. We
also introduce intermediate subclasses for physical and logical DRCs,
a division which will be useful later on.
Instead of being stored in the DRC object itself, the PAPR type is now
stored in the class structure. There are still many places where we
switch directly on the PAPR type value, but this at least provides the
basis to start to remove those.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As explained in commit 5c0139a8c2 ("spapr: fix default DRC state for
coldplugged LMBs"), guests expect cold-plugged LMBs to be pre-allocated
and unisolated. The same goes for cold-plugged CPUs.
While here, let's convert g_assert(false) to the better self documenting
g_assert_not_reached().
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The current implementation of spapr_get_fw_dev_path() doesn't take into
consideration vhost-*-scsi devices. This makes said devices unbootable
on PPC as SLOF is unable to work out the path to scan boot disks.
This makes VMs bootable on spapr when using vhost-*-scsi by implementing
a disk path for VHostSCSICommon (which currently includes both
vhost-user-scsi and vhost-scsi).
Signed-off-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Mike Cui <cui@nutanix.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The blk_getlength() function can return an error value if the
image size cannot be determined. Check for this rather than
ploughing on and trying to g_malloc0() a negative number.
(Spotted by Coverity, CID 1288484.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
set_spr is used in the function h_register_process_table() to update the
LPCR_GTSE and LPCR_UPRT values based on the flags passed by the guest.
The set_spr function takes the last two arguments mask and value used to
mask and set the value of the spr respectively.
The current call site passes these arguments in the wrong order and thus
bot GTSE and UPRT will be set irrespective, which is obviously
incorrect.
Rearrange the function call so that these arguments are passed in the
correct order and the correct behaviour is exhibited.
It is worth noting that this wasn't detected earlier since these were
always both set in all cases where this H_CALL was made.
Fixes: 6de833070c ("target/ppc: Set UPRT and GTSE on all cpus in H_REGISTER_PROCESS_TABLE")
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
openpic_tmr_read() is incorrectly computing register offset of the
TCCR, TBCR, TVPR, and TDR registers when accessing the open pic timer
registers. Specifically the offset of timer registers for
openpic_tmr_read() is not accounting for the timer frequency reporting
register (TFFR) which is the first register in the "tmr" memory
region.
openpic_tmr_write() *is* correctly computing the offset by adding
0x10f0 to the address prior to computing the register index. This
patch instead subtracts 0x10 in both the read and write routines and
eliminates some other gratuitous differences between the functions.
Signed-off-by: Aaron Larson <alarson@ddci.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
These two methods only have one implementation, and the spec they're
implementing means any other implementation is unlikely, verging on
impossible.
So replace them with simple functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
DRConnectorClass has a set_configured method, however:
* There is only one implementation, and only ever likely to be one
* There's exactly one caller, and that's (now) local
* The implementation is very straightforward
So abolish the method entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
The DRConnectorClass includes a get_fdt method. However
* There's only one implementation, and there's only likely to ever be one
* Both callers are local to spapr_drc
* Each caller only uses one half of the actual implementation
So abolish get_fdt() entirely, and just open-code what we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Currently implementations of the RTAS calls related to DRCs are in
spapr_rtas.c. They belong better in spapr_drc.c - that way they're closer
to related code, and we'll be able to make some more things local.
spapr_rtas.c was intended to contain the RTAS infrastructure and core calls
that don't belong anywhere else, not every RTAS implementation.
Code motion only.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
We can replace the four remaining calls of register_savevm() by
calls to register_savevm_live(). So we can remove the function and
as we don't allocate anymore the ops pointer with g_new0()
we don't have to free it then.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
even though spapr_fixup_cpu_numa_dt() has no effect on FDT
if numa is disabled, don't call it uselessly. It makes it
obvious at call sites that function is needed only when numa
is enabled.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-7-git-send-email-imammedo@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move vcpu's associated numa_node field out of generic CPUState
into inherited classes that actually care about cpu<->numa mapping,
i.e: ARMCPU, PowerPCCPU, X86CPU.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-6-git-send-email-imammedo@redhat.com>
[ehabkost: s/CPU is belonging to/CPU belongs to/ on comments]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It fixes/add missing _PXM object for non mapped CPU (x86)
and missing fdt node (virt-arm).
It ensures that possible_cpus contains complete mapping if
numa is enabled by the time machine_init() is executed.
As result non completely mapped CPUs:
1) appear in ACPI/fdt blobs
2) QMP query-hotpluggable-cpus command shows bound nodes for such CPUs
3) allows to drop checks for has_node_id in numa only code,
reducing number of invariants incomplete mapping could produce
4) moves fixup/implicit node init from runtime numa_cpu_pre_plug()
(when CPU object is created) to machine_numa_finish_init() which
helps to fix [1, 2] and make possible_cpus complete source
of numa mapping available even before CPUs are created.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-4-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
there is no need use cpu_index_to_instance_props() for setting
default cpu -> node mapping. Generic machine code can do it
without cpu_index by just enabling already preset defaults
in possible_cpus.
PS:
as bonus it makes one less user of cpu_index_to_instance_props()
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496161442-96665-3-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The target-specific code in nmi.c has been removed with this commit:
commit f7e981f295
nmi: remove x86 specific nmi handling
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>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=5eL6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into staging
# gpg: Signature made Fri 02 Jun 2017 20:12:48 BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/chrfe-pull-request:
char: move char devices to chardev/
char: make chr_fe_deinit() optionaly delete backend
char: rename functions that are not part of fe
char: move CharBackend handling in char-fe unit
char: generalize qemu_chr_write_all()
be-hci: use backend functions
chardev: serial & parallel declaration to own headers
chardev: move headers to include/chardev
Remove/replace sysemu/char.h inclusion
char-win: close file handle except with console
char-win: rename hcom->file
char-win: rename win_chr_init/poll win_chr_serial_init/poll
char-win: remove WinChardev.len
char-win: simplify win_chr_read()
char: cast ARRAY_SIZE() as signed to silent warning on empty array
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
lsi_mem_read/write() always return 0 about which their
callers actually don't care. Change the function type
to void.
Signed-off-by: Mao Zhongyi <maozy.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace malloc/free/sprintf with g_string/g_string_printf/g_string_free.
Replace g_malloc with g_new when allocating the MemoryRegion to get more
type safety.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Use sizeof instead of ARRAY_SIZE, fixing -Wmemset-elt-size with recent
GCC versions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
IOTLB support in vhost-user.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZMZNVAAoJECgfDbjSjVRpmJ0H/R9zMmXg6SclYlQ2qnHKXWrG
GAzwvQ+qHG2SfcmbR+FlTBsnTRz7nSPS4yvDgxRaO22ew2zROZdMDif0fsZWxByr
a5QbmMMSHL++75vNieIM7Ar7eWhTjD+eG8J1k6qB5krEVILlHupYeYzez/xBiW0H
GBkPG7zXkApqZSTxdTyGfOljz7O4kYJaqJx/oUYO5vGglcDz8YHXp1WamvVRgnab
5aLP722DOvubbhs3b3XAA3Zqxonc3uLn049+yAVCSwRlGaXbxj/P+cCx3dYehnoR
qA6IMmwQdjOCSP8R8QIe6beRMX97z7JPVy/JAY8Fwe7gl0vEvB1ZNmmZGTBhp5I=
=ErJZ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost: fixes, features
IOTLB support in vhost-user.
A bunch of fixes all over the place.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 02 Jun 2017 17:33:25 BST
# gpg: using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
spec/vhost-user spec: Add IOMMU support
vhost-user: add slave-req-fd support
vhost-user: add vhost_user to hold the chr
vhost: rework IOTLB messaging
vhost: propagate errors in vhost_device_iotlb_miss()
virtio-serial: fix segfault on disconnect
virtio: add virtqueue_alloc_element tracepoint
virtio-serial-bus: Unset hotplug handler when unrealize
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch specifies and implements the master/slave communication
to support device IOTLB in slave.
The vhost_iotlb_msg structure introduced for kernel backends is
re-used, making the design close between the two backends.
An exception is the use of the secondary channel to enable the
slave to send IOTLB miss requests to the master.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Learn to give a socket to the slave to let him make requests to the
master.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Next patches will add more fields to the structure
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch reworks IOTLB messaging to prepare for vhost-user
device IOTLB support.
IOTLB messages handling is extracted from vhost-kernel backend,
so that only the messages transport remains backend specifics.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some backends might want to know when things went wrong.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit d4c19cdeeb ("virtio-serial:
add missing virtio_detach_element() call") the following commands may
cause QEMU to segfault:
$ qemu -M accel=kvm -cpu host -m 1G \
-drive if=virtio,file=test.img,format=raw \
-device virtio-serial-pci,id=virtio-serial0 \
-chardev socket,id=channel1,path=/tmp/chardev.sock,server,nowait \
-device virtserialport,chardev=channel1,bus=virtio-serial0.0,id=port1
$ nc -U /tmp/chardev.sock
^C
(guest)$ cat /dev/zero >/dev/vport0p1
The segfault is non-deterministic: if the event loop notices the socket
has been closed then there is no crash. The disconnect has to happen
right before QEMU attempts to write data to the socket.
The backtrace is as follows:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x00005555557e0698 in do_flush_queued_data (port=0x5555582cedf0, vq=0x7fffcc854290, vdev=0x55555807b1d0) at hw/char/virtio-serial-bus.c:180
180 for (i = port->iov_idx; i < port->elem->out_num; i++) {
#1 0x000055555580d363 in virtio_queue_notify_vq (vq=0x7fffcc854290) at hw/virtio/virtio.c:1524
#2 0x000055555580d363 in virtio_queue_host_notifier_read (n=0x7fffcc8542f8) at hw/virtio/virtio.c:2430
#3 0x0000555555b3482c in aio_dispatch_handlers (ctx=ctx@entry=0x5555566b8c80) at util/aio-posix.c:399
#4 0x0000555555b350d8 in aio_dispatch (ctx=0x5555566b8c80) at util/aio-posix.c:430
#5 0x0000555555b3212e in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>) at util/async.c:261
#6 0x00007fffde71de52 in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#7 0x0000555555b34353 in glib_pollfds_poll () at util/main-loop.c:213
#8 0x0000555555b34353 in os_host_main_loop_wait (timeout=<optimized out>) at util/main-loop.c:261
#9 0x0000555555b34353 in main_loop_wait (nonblocking=<optimized out>) at util/main-loop.c:517
#10 0x0000555555773207 in main_loop () at vl.c:1917
#11 0x0000555555773207 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4751
The do_flush_queued_data() function does not anticipate chardev close
events during vsc->have_data(). It expects port->elem to remain
non-NULL for the duration its for loop.
The fix is simply to return from do_flush_queued_data() if the port
closes because the close event already frees port->elem and drains the
virtqueue - there is nothing left for do_flush_queued_data() to do.
Reported-by: Sitong Liu <siliu@redhat.com>
Reported-by: Min Deng <mdeng@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This tracepoint can help diagnosing failures due to memory
fragmentation in the guest.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtio serial device controls the lifetime of virtio-serial-bus and
virtio-serial-bus links back to the device via its hotplug-handler
property. This extra ref-count prevents the device from getting
finalized, leaving the VirtIODevice memory listener registered and
leading to use-after-free later on.
This patch addresses the same issue as Fam Zheng's
"virtio-scsi: Unset hotplug handler when unrealize"
only for a different virtio device.
Cc: qemu-stable@nongnu.org
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
-----BEGIN PGP SIGNATURE-----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=tEkM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170601' into staging
migration/next for 20170601
# gpg: Signature made Thu 01 Jun 2017 17:51:04 BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20170601:
migration: Move include/migration/block.h into migration/
migration: Export ram.c functions in its own file
migration: Create include for migration snapshots
migration: Export rdma.c functions in its own file
migration: Export tls.c functions in its own file
migration: Export socket.c functions in its own file
migration: Export fd.c functions in its own file
migration: Export exec.c functions in its own file
migration: Split qemu-file.h
migration: Remove unneeded includes of migration/vmstate.h
migration: shut src return path unconditionally
migration: fix leak of src file on dst
migration: Remove section_id parameter from vmstate_load
migration: loadvm handlers are not used
migration: Use savevm_handlers instead of loadvm copy
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on patch Shannon Zhao originally posted.
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 20170529173751.3443-3-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>