The gen_qemu_ld8s() function is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Remove the definition of the IMM and d extract helpers; these seem to have
been added as part of the initial PPC support in 2003 but never actually
used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fixed bug in gen_mcrxr() in target-ppc/translate.c:
The XER[SO], XER[OV], and XER[CA] flags are stored in the least
significant bit (bit 0) of their respective registers. They need
to be shifted left (by their respective offsets) to generate the final
XER value. The old translation code for the 'mcrxr' instruction
was assuming that the flags are stored in bit 2, and was shifting them
right (incorrectly)
Signed-off-by: Sorav Bansal <sbansal@cse.iitd.ernet.in>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Tested-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds an FSCR (Facility Status and Control Register) SPR. This defines
names for FSCR bits.
This defines new exception type - POWERPC_EXCP_FU - "facility unavailable" (FU).
This registers an interrupt vector for it at 0xF60 as PowerISA defines.
This adds a TCG helper_fscr_facility_check() helper to raise an exception
if the facility is not enabled. It updates the interrupt cause field
in FSCR. This adds a TCG translation block generation code. The helper
may be used for HFSCR too as it has the same format.
The helper raising FU exceptions is not used by this patch but will be
in the next ones.
This adds gen_update_current_nip() to update NIP in DisasContext.
This helper is not used now and will be called before checking for
a condition for throwing an FU exception.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix a temporary variable leak detected in the bctar instruction:
Opcode 13 10 11 (4d910460) leaked temporaries
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Today we have a lot of conditional code in the SPE emulation depending on
whether we have 64bit GPRs or not.
Unfortunately the assumption that we can just recycle the 64bit GPR
implementation is wrong. Normal SPE implementations maintain the upper 32 bits
on all non-SPE instructions which then only modify the low 32 bits. However
all instructions we model that adhere to the normal SF based switching don't
care whether they operate on 32 or 64 bit registers and just always use the full
64 bits.
So let's remove that dubious SPE optimization and revert everything to the same
code path the 32bit target code was taking. That way we get rid of differences
between the two implementations, but will get a slight performance hit when
emulating SPE instructions.
This fixes SPE emulation with qemu-system-ppc64 for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
The SPE emulation code wants to access the highest 32bits of a 64bit register
and uses the andi TCG instruction for that. Unfortunately it masked with the
wrong mask. Fix the mask to actually cover the upper 32 bits.
This fixes simple multiplication tests with SPE guests for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
This allows running PPC64 little-endian in user mode if target is configured
that way. In PPC64 LE user mode we set MSR.LE during initialization.
Signed-off-by: Doug Kwan <dougkwan@google.com>
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The popcntb instruction is erroneously encoded with opcode extension (opc1,opc2) = (0x03,0x03).
Bits 21-30 of popcntb are 122 = 0b00011-0b11010 and therefore this should be encoded
as (opc1,opc2) = (0x1A, 0x03).
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The dcbtls instruction is able to lock data inside the L1 cache.
Unfortunately we don't emulate any caches, so we have to tell the guest
that its locking attempt failed.
However, by implementing the instruction we at least don't give the
guest a program exception which it definitely does not expect.
Signed-off-by: Alexander Graf <agraf@suse.de>
When QEMU gets compiled with --enable-debug-tcg we can check for temporary
leakage. Implement the necessary target code for this and fail emulation
when we hit a leakage.
This hopefully ensures that we don't get new leaks.
Signed-off-by: Alexander Graf <agraf@suse.de>
We want to make sure that every instruction cleans up after itself and
clears every temporary it allocated.
While checking whether this is already the case, I came across a few
cases where it isn't. This patch fixes every translation I found that
doesn't free their allocated temporaries.
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Shift Significand
Left Immediate (dscli[q][.]) and DFP Shift Significant Right Immediate
(dscri[q][.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Insert Biased
Exponent instructions diex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Extract
Biased Exponent instructions dxex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Encode Binary
Coded Decimal to Densely Packed Decimal instructions denbcd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the Power PC Decimal Floating Point Decode
Densely Packed Decimal to Binary Coded Decimal instructions
ddedpd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Convert to Fixed
instructions dctfix[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Convert to
Fixed instructions dctfix[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Round to DFP Short (drsp[.]) and Round to
DFP Long (drdpq[.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Convert to DFP Long (dctdp[.]) and
Convert to DFP Extended (dctqpq[.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point (DFP) Round
to FP Integer With Inexact (drintx[q][.]) and DFP Round to FP
Integer Without Inexact (drintn[q][.]) instructions.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Reround instructions
drrnd[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Quantize instructions
dquai[q][.] and dqua[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Significance
instructions dtstsf[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Exponent
instructions dtstex[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Data
Group instructions dtstdg[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Test Data Class
instructions dtstdc[q][.].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Compare instructions
dcmpu[q] and dcmpo[q].
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Divide instructions
ddiv[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Multiply instructions
dmul[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Subtract instructions
dsub[q][.]
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add emulation of the PowerPC Decimal Floating Point Add instructions dadd[q][.]
Various GCC unused annotations are removed since it is now safe to remove them.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: move brace in function definition]
Signed-off-by: Alexander Graf <agraf@suse.de>
Add decoder macros for the various Decimal Floating Point
instruction forms. Illegal instruction masks are used to not only
guard against reserved instruction field use, but also to catch
illegal quad word forms that use odd-numbered floating point registers.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add general support for generators of PowerPC Decimal Floating Point helpers.
Some utilities are annotated with GCC attribute unused in order to preserve
build bisection. These annotations will be removed in later patches.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Per Alex Graf's suggestion, the recently added case to gen_conditional_store
for stqcx should use an additional temporary when accessing the second
doubleword. This avoids the mutation of the EA argument to the function,
which is counter intuitive.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
64 bit constants need the "ULL" suffix, not just "UL", because
on 32 bit platforms 'long' is not large enough and this will
cause a compiler warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Permuate and Exclusive OR (vpermxor)
instruction introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector SHA Sigma instructions introduced in Power
ISA Version 2.07:
- Vector SHA-512 Sigma Doubleword (vshasigmad)
- Vector SHA-256 Sigma Word (vshasigmaw)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector AES instructions introduced in Power ISA
Version 2.07:
- Vector AES Cipher (vcipher)
- Vector AES Cipher Last (vcipherlast)
- Vector AES Inverse Cipher (vncipher)
- Vector AES Inverse Cipher Last (vncipherlast)
- Vector AES SubBytes (vsbox)
Note that the implementation of vncipher deviates from the RTL in
ISA V2.07. However it does match the verbal description in the
third paragraph. The RTL will be fixed in ISA V2.07B. The
implementation here has been tested against actual P8 hardware.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch add the Binary Coded Decimal instructions bcdadd. and
bcdsub.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vectory Polynomial Multiply Sum instructions
introduced in Power ISA Version 2.07:
- Vectory Polynomial Multiply Sum Byte (vpmsumb)
- Vectory Polynomial Multiply Sum Halfword (vpmsumh)
- Vectory Polynomial Multiply Sum Word (vpmsumw)
- Vectory Polynomial Multiply Sum Doubleword (vpmsumd)
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Gather Bits by Bytes Doubleword (vgbbd)
instruction which is introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Compare Doubleword instructions introduced
by Power ISA Version 2.07:
- Vector Compare Equal to Unsigned Doubleword (vcmpequd)
- Vector Compare Greater Than Signed Doubleword (vcmpgtsd)
- Vector Compare Greater Than Unsigned Doubleword (vcmpgtud)
These instructions are encoded with bit 31 set to 1 and so are duals with
vcmpeqfp, vcmpgtfp and vcmpbfp respectively.
The helper macro for integer compares is enhanced to account for 64-bit
operands.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Vector Bit Permute Quadword (vbpermq) instruction
introduced in Power ISA Version 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>