Commit 27d92ebc5e handled the case where the TCP
connection is abruptly closed via a RST packet, by checking for the ECONNRESET
errno. However it does not consider the case where the connection has been
half-closed by the host (FIN/ACK), then the host socket is disconnected. For
example, if the host application calls close() on the socket, then the
application exits.
In this case, the socket still exists due to the file descriptor in SLIRP, but
it is disconnected. recv() does not indicate an error since an orderly socket
close has previously occurred. The socket will then be stuck in FIN_WAIT_2,
until the peer sends FIN/ACK or a timeout occurs. Instead we can send a RST
to the peer and transition to the CLOSED state.
Signed-off-by: Gavin Grant <gavingrant@protonmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
On Linux, SOCK_DGRAM+IPPROTO_ICMP sockets give only the ICMP packet when
read from. On macOS, however, the socket acts like a SOCK_RAW socket
and includes the IP header as well.
This change strips the extra IP header from the received packet on macOS
before sending it to the guest. SOCK_DGRAM ICMP sockets aren't
supported on other BSDs, but we enable this behavior for them as well to
treat the sockets the same as raw sockets.
Signed-off-by: Andrew Oates <aoates@google.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
and fix confusing datasize name into gapsize in m_inc.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
The ISA has a 128/64-bit division instruction, though it assumes the
low 64-bits of the numerator are 0, and so requires a bit more fixup
than a full 128-bit division insn.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ISA has a 128/64-bit division instruction.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ISA has a 128/64-bit division instruction.
Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The __udiv_qrnnd primitive that we nicked from gmp requires its
inputs to be normalized. We were not doing that. Because the
inputs are nearly normalized already, finishing that is trivial.
Replace div128to64 with a "proper" udiv_qrnnd, so that this
remains a reusable primitive.
Fixes: cf07323d49
Fixes: https://bugs.launchpad.net/qemu/+bug/1793119
Tested-by: Emilio G. Cota <cota@braap.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Our minimum required compiler for compiling QEMU is GCC 4.1 these days,
so we can drop the support for compilers which do not provide the
__builtin_clz*() functions yet. Since the countLeadingZeros32/64 are
then identical to the clz32/64 functions, and we do not have to sync
the softloat 2 codebase with upstream anymore (softloat 3 is a complete
rewrite) we can simply replace the functions with our QEMU versions.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538118095-7003-1-git-send-email-thuth@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By leveraging berkeley's softfloat and testfloat.
With this we get decent coverage of softfloat.c:
$ ./fp-test -r even: 67.22% coverage
$ ./fp-test -r all: 73.11% coverage
Note that we do not yet test parts of softfloat.c that aren't
in the original softfloat library, namely:
- denormal inputs
- *_to_int16/uint16 conversions
- scalbn for fixed point
- muladd variants
- min/max
- exp2
- log2
- float*_compare (except float16_compare)
Signed-off-by: Emilio G. Cota <cota@braap.org>
[rth: Add the new modules to git_submodules.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are BSD-licensed so we can add them as submodules.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It has not had users since f83311e476 ("target-m68k: use floatx80
internally", 2017-06-21).
Note that no other bit-width has floatX_trunc_to_int.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- fix several struct definitions so that sparc hosts do not trip over
unaligned accesses
- fence enabling huge pages for pre-3.1 machines
- sysbus init -> realize conversion
- fixes and improvements in tcg (instruction flags and AFP registers)
-----BEGIN PGP SIGNATURE-----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=0e7K
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20181004' into staging
Various s390x updates:
- fix several struct definitions so that sparc hosts do not trip over
unaligned accesses
- fence enabling huge pages for pre-3.1 machines
- sysbus init -> realize conversion
- fixes and improvements in tcg (instruction flags and AFP registers)
# gpg: Signature made Thu 04 Oct 2018 16:22:20 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20181004:
hw/s390x/s390-pci-bus: Convert sysbus init function to realize function
s390x/tcg: refactor specification checking
s390x/tcg: fix FP register pair checks
s390x/tcg: handle privileged instructions via flags
s390x/tcg: check for AFP-register, BFP and DFP data exceptions
s390x/tcg: add instruction flags for floating point instructions
s390x/tcg: support flags for instructions
s390x/tcg: store in the TB flags if AFP is enabled
s390x/tcg: factor out and fix DATA exception injection
s390x: move tcg_s390_program_interrupt() into TCG code and mark it noreturn
target/s390x: exception on non-aligned LPSW(E)
s390x: Fence huge pages prior to 3.1
hw/s390x/ioinst: Fix alignment problem in struct SubchDev
hw/s390x/css: Remove QEMU_PACKED from struct SenseId
hw/s390x/ipl: Fix alignment problems of S390IPLState members
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix bugs in NBD_CMD_CACHE, drop support for oldstyle NBD server,
minor build and doc fixes
- Denis V. Lunev: nbd: fix NBD_CMD_CACHE negitiation... [retitled]
- Vladimir Sementsov-Ogievskiy: 0/2 server: drop old-style negotiation
- Eric Blake: qemu-nbd: Document --tls-creds
- Vladimir Sementsov-Ogievskiy: nbd/server: fix NBD_CMD_CACHE
- Peter Maydell: nbd: Don't take address of fields in packed structs
-----BEGIN PGP SIGNATURE-----
Comment: Public key at http://people.redhat.com/eblake/eblake.gpg
iQEcBAABCAAGBQJbtiF0AAoJEKeha0olJ0NqqgsH/RKL+SPl8S4xslZ8pTcXL2OW
AgMZInxKAe3MDX6NiCYFDWU4/32NNzPluWMh7DGu3mqFQiVySz9oAz2csZ4Fd5nm
NfY6Ewu64HF/REN7dNLfyrbmfzD3PdCUAa2PsasH1wzKArTklyfJH/QeOHbJ60H8
5AjthM/ksFNSAZXp+R+gzr2zGHN1cXwNBn87tKndPYaiIc95azPSZOnQpLLN9gfH
YwxCKk+opeEJNMuXf/PdkksbxqNxHsBCYSAL9NzjzS/+T8GIpHQAZvKGSk6FKDp+
x+KcC2pL7Lmu6iJWGIo5hGSSsBP1aXp0MJ/dUD+jo13LWNwzGFmovNI4pUuEK2A=
=0s7A
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2018-10-03-v2' into staging
nbd patches for 2018-10-03
Fix bugs in NBD_CMD_CACHE, drop support for oldstyle NBD server,
minor build and doc fixes
- Denis V. Lunev: nbd: fix NBD_CMD_CACHE negitiation... [retitled]
- Vladimir Sementsov-Ogievskiy: 0/2 server: drop old-style negotiation
- Eric Blake: qemu-nbd: Document --tls-creds
- Vladimir Sementsov-Ogievskiy: nbd/server: fix NBD_CMD_CACHE
- Peter Maydell: nbd: Don't take address of fields in packed structs
# gpg: Signature made Thu 04 Oct 2018 15:19:32 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>"
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>"
# gpg: aka "[jpeg image of size 6874]"
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2018-10-03-v2:
nbd: fix NBD_FLAG_SEND_CACHE value
nbd/server: drop old-style negotiation
qemu-nbd: drop old-style negotiation
qemu-nbd: Document --tls-creds
nbd/server: fix NBD_CMD_CACHE
nbd: Don't take address of fields in packed structs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Iterate over the writable class properties, sort and print them out
with the description if available.
Ex: qemu -object memory-backend-file,help
memory-backend-file.align=int
memory-backend-file.discard-data=bool
memory-backend-file.dump=bool - Set to 'off' to exclude from core dump
memory-backend-file.host-nodes=int - Binds memory to the list of NUMA host nodes
memory-backend-file.mem-path=string
memory-backend-file.merge=bool - Mark memory as mergeable
memory-backend-file.pmem=bool
memory-backend-file.policy=HostMemPolicy - Set the NUMA policy
memory-backend-file.prealloc=bool - Preallocate memory
memory-backend-file.share=bool - Mark the memory as private to QEMU or shared
memory-backend-file.size=int - Size of the memory region (ex: 500M)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This test failed before "fix iterating properties over a class".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
And factor out a common function used by the follow class properties
iterator test.
Fix uninitialized "seentype" variable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Let's save a few byte in each object instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
object_class_property_iter_init() starts from the given class, so the
next class should continue with the parent class.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Modify qemu_opts_print_help():
- to print expected argument type
- skip description if not available
- sort lines
- prefix with the list name (like qdev, to avoid confusion)
- drop 16-chars alignment, use a '-' as seperator for option name and
description
For ex, "-spice help" output is changed from:
port No description available
tls-port No description available
addr No description available
[...]
gl No description available
rendernode No description available
to:
spice.addr=str
spice.agent-mouse=bool (on/off)
spice.disable-agent-file-xfer=bool (on/off)
[...]
spice.x509-key-password=str
spice.zlib-glz-wan-compression=str
"qemu-img create -f qcow2 -o help", changed from:
size Virtual disk size
compat Compatibility level (0.10 or 1.1)
backing_file File name of a base image
[...]
lazy_refcounts Postpone refcount updates
refcount_bits Width of a reference count entry in bits
to:
backing_file=str - File name of a base image
backing_fmt=str - Image format of the base image
cluster_size=size - qcow2 cluster size
[...]
refcount_bits=num - Width of a reference count entry in bits
size=size - Virtual disk size
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QDev options accept 'help' (or '?', but that's problematic with shell
globbing) in the list of parameters, which is handy to list the
available options.
Unfortunately, this isn't built in QemuOpts. qemu_opts_parse_noisily()
seems to be the common path for command line options, so place a
fallback to print help, listing the available options.
This is quite handy, for example with qemu "-spice help".
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qdev_device_help() is used from command line "-device help", or from
HMP "device_add". If used from command line, print help to stdout
(it is only printed on explicit demand).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
"EMU" actually is "Emulex Corporation", so not a good idea to use that
by default. Lets use the Red Hat vendor id instead, which is in line
with the pci ids which are allocated from Red Hat vendor ids too.
Vendor list is available from http://www.uefi.org/pnp_id_list
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005091934.12143-1-kraxel@redhat.com
93abfc88bd introduced a reference cycle in
the vga-pci devices, preventing cleanup of the object upon hotblug.
This patch allows to break the cycle.
Signed-off-by: remy.noel <remy.noel@blade-group.com>
Message-id: 20181002121935.23706-1-remy.noel@blade-group.com
[ kraxel: delete the recently added edid region too ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If QEMU is compiled with clang-7 it results in the warning:
hw/display/qxl.c:1884:19: error: misaligned or large atomic operation
may incur significant performance penalty [-Werror,-Watomic-alignment]
old_pending = atomic_fetch_or(&d->ram->int_pending, le_events);
^
This is because the Spice headers forgot to define the QXLRam struct
with the '__aligned__(4)' attribute. clang 7 and newer will thus
warn that the access here to int_pending might not be 4-aligned
(because the QXLRam object d->ram points at might start at a
misaligned address). In fact we set up d->ram in init_qxl_ram() so
it always starts at a 4K boundary, so we know the atomic access here
is OK.
Newer Spice versions (with Spice commit
beda5ec7a6848be20c0cac2a9a8ef2a41e8069c1) will fix the bug;
for older Spice versions, work around it by telling the compiler
explicitly that the alignment is OK using __builtin_assume_aligned().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180927155538.699-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit bc37b06a5 added NBD_CMD_CACHE support, but used the wrong value
for NBD_FLAG_SEND_CACHE flag for negotiation. That commit picked bit 8,
which had already been assigned by the NBD specification to mean
NBD_FLAG_CAN_MULTI_CONN, and which was already implemented in the
Linux kernel as a part of stable userspace-kernel API since 4.10:
"bit 8, NBD_FLAG_CAN_MULTI_CONN: Indicates that the server operates
entirely without cache, or that the cache it uses is shared among all
connections to the given device. In particular, if this flag is
present, then the effects of NBD_CMD_FLUSH and NBD_CMD_FLAG_FUA
MUST be visible across all connections when the server sends its reply
to that command to the client. In the absense of this flag, clients
SHOULD NOT multiplex their commands over more than one connection to
the export.
...
bit 10, NBD_FLAG_SEND_CACHE: documents that the server understands
NBD_CMD_CACHE; however, note that server implementations exist
which support the command without advertising this bit, and
conversely that this bit does not guarantee that the command will
succeed or have an impact."
Consequences:
- a client trying to use NBD_CMD_CACHE per the NBD spec will not
see the feature as available from a qemu 3.0 server (not fatal,
clients already have to be prepared for caching to not exist)
- a client accidentally coded to the qemu 3.0 bit value instead
of following the spec may interpret NBD_CMD_CACHE as being available
when it is not (probably not fatal, the spec says the server should
gracefully fail unknown commands, and that clients of NBD_CMD_CACHE
should be prepared for failure even when the feature is advertised);
such clients are unlikely (perhaps only in unreleased Virtuozzo code),
and will disappear over time
- a client prepared to use multiple connections based on
NBD_FLAG_CAN_MULTI_CONN may cause data corruption when it assumes
that caching is consistent when in reality qemu 3.0 did not have
a consistent cache. Partially mitigated by using read-only
connections (where nothing needs to be flushed, so caching is
indeed consistent) or when using qemu-nbd with the default -e 1
(at most one client at a time); visible only when using -e 2 or
more for a writable export.
Thus the commit fixes negotiation flag in QEMU according to the
specification.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
CC: Valery Vdovin <valery.vdovin@acronis.com>
CC: Eric Blake <eblake@redhat.com>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: qemu-stable@nongnu.org
Message-Id: <20181004100313.4253-1-den@openvz.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: enhance commit message, add defines for unimplemented flags]
Signed-off-by: Eric Blake <eblake@redhat.com>
The SysBusDeviceClass->init() interface is considered as a legacy interface
and there are currently some efforts going on to get rid of it. Thus let's
convert the init function in the s390x code to realize() instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538466491-2073-1-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can fit this nicely into less LOC, without harming readability.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Valid register pairs are 0/2, 1/3, 4/6, 5/7, 8/10, 9/11, 12/14, 13/15.
R1/R2 always selects the lower number, so the current checks are not
correct as e.g. 2/4 could be selected as a pair.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's check this also at a central place.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-8-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the annotated functions, we can now easily check this at a central
place.
DXC 1 is to be injected if an AFP register is used (for a HFP AND FPS
instruction) when AFP is disabled.
DXC 2 is to be injected if a BFP instruction is used when AFP is
disabled.
DXC 3 is to be injected if a DFP instruction is used when AFP is
disabled.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
These flags allow us to later on detect if a DATA program interrupt
is to be injected, and which DXC (1,2,3) is to be used.
Interestingly, some support FP instructions are considered as HFP
instructions (I assume simply because they were available very early).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-6-david@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Storing flags for instructions allows us to efficiently verify certain
properties at a central point. Examples might later be handling if
AFP is disabled in CR0, we are not in problem state, or if vector
instructions are disabled in CR0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We exit the TB when changing the control registers, so just like PSW
bits, this should always be consistent for a TB.
Using the PSW bit semantic makes things a lot easier compared to
manually defining the spare, shifted bits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The DXC is to be stored in the low core, and only in the FPC in case AFP
is enabled in CR0. Stub is not required in current code, but this way
we never run into problems.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Move it into TCG-only code and provide a stub. Turn it into noreturn.
As Richard noted, we currently don't log the psw.addr before restoring
the state, fix that by moving (duplicating) the qemu_log_mask in the
tcg/kvm handlers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180927130303.12236-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Both LPSW and LPSWE should raise a specification exception when their
operand is not doubleword aligned.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Message-Id: <20180902003322.3428-3-pavel.zbitskiy@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As the kernel has no way of disallowing the start of a huge page
backed VM, we can migrate a running huge backed VM to a host that has
no huge page KVM support.
Let's glue huge page support support to the 3.1 machine, so we do not
migrate to a destination host that doesn't have QEMU huge page support
and can stop migration if KVM doesn't indicate support.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20180928093435.198573-1-frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
struct SubchDev embeds several other structures which are marked with
QEMU_PACKED. This causes the compiler to not care for proper alignment
of these structures. When we later pass around pointers to the unaligned
struct members during migration, this causes problems on host architectures
like Sparc that can not do unaligned memory access.
Most of the structs in ioinst.h are naturally aligned, so we can fix
most of the problem by removing the QEMU_PACKED statements (and use
QEMU_BUILD_BUG_MSG() statements instead to make sure that there is no
padding). However, for the struct SCHIB, we have to keep the QEMU_PACKED
since the compiler adds some padding here otherwise. Move this struct
to the beginning of struct SubchDev instead to fix the alignment problem
here, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-4-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The uint16_t member cu_type of struct SenseId is not naturally aligned,
and since the struct is marked with QEMU_PACKED, this can lead to
unaligned memory accesses - which does not work on architectures like
Sparc. Thus remove the QEMU_PACKED here and rather copy the struct
byte by byte when we do copy_sense_id_to_guest().
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-3-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The IplParameterBlock and QemuIplParameters structures are declared with
QEMU_PACKED, so the compiler assumes that the structures do not need to
be aligned in memory. Since the are listed after a "bool" within the
S390IPLState, the IplParameterBlock and QemuIplParameters are also indeed
mis-aligned in memory. This causes problems on Sparc during migration, since
we use VMSTATE_UINT16 in vmstate_iplb to access the devno member for example,
and the corresponding migration functions (like qemu_get_be16s) then try to
access a 16-bit value from a misaligned memory address.
The easiest solution to fix this problem is to move the packed structures
to the beginning of the S390IPLState, right after the DeviceState of course
which has to stay first for QOM reasons. But since DeviceState is a non-packed
struct, we can be sure that it will be padded to the correct alignment at the
end. If not, the QEMU_BUILD_BUG_MSG in this patch will tell us.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538036615-32542-2-git-send-email-thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The problem with the various serial devices has been fixed a while
ago in commit 47c4f85a0c ("hw/char/serial:
Allow disconnected chardevs") already, so we can remove these entries
from the "ignore" list in the device-crash-test script now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538403190-27146-1-git-send-email-thuth@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>