mvc_fast_memset is bypassing the softmmu functions, getting the
physical address using the mmu_translate function and accessing the
corresponding physical memory. This prevents watchpoints to work
correctly.
Instead use the tlb_vaddr_to_host function to get the host address
corresponding to the guest address through the softmmu code and fallback
to the byte level code in case the corresponding address is not in the
QEMU TLB or being examined through a watchpoint. As a bonus it works
even for area crossing pages by splitting the are into chunks contained
in a single page, bringing some performances improvements.
At the same time change the name of the function to fast_memset as it's
not specific to mvc and use the same argument order as the C memset
function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds a function to adjust the length of a transfer so that
it doesn't cross a page boundary in softmmu mode. It does nothing in
user mode.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
To avoid to many #ifdef in target code, provide a tlb_vaddr_to_host for
both user and softmmu modes. In the first case the function always
succeed and just call the g2h function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The code handling the I/O instructions for KVM decodes the instruction
itself. In TCG mode also pass the full instruction word to the helpers.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
DIAG IPL is already implemented for KVM, but not wired from TCG. For
that change the format of the instruction so that we can get R1 and R3
numbers in addition to the function code.
The diag function can change plenty of things, including CC, so we
should enter with a static CC. Also it doesn't set the value of general
register 2 to 0 as in the current code. We also need to exit the CPU
loop after a reset, which means a new PSW.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The s390_cpu_initial_reset function zeroes a big part of the CPU state
structure, including CPU_COMMON, and thus the QEMU TLB structure. As
they should not be initialized with zeroes only, we need to call the
tlb_flush to initialize it correctly.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
env->io_index[] should be set to -1 during CPU reset to mark the
I/O interrupt queue as empty.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
env->ext_index should be initialized to -1 to mark the external
interrupt queue as emtpy. This should not be done in s390_cpu_initfn
as all the interrupt fields are later reset to 0 by the memset in
s390_cpu_initial_reset or s390_cpu_full_reset. Move the initialization
there.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
In TCG mode we should store the CC value in env->cc_op. However do it
inconditionnaly because:
- the tcg_enabled function is not inlined
- it's probably faster to always store the value, especially given it
is likely in the same cache line than env->psw.mask.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This remove the corresponding error messages in TCG mode, and allow to
simplify the s390_assign_subch_ioeventfd() function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The ioinst_schib_valid gets a SCHIB in guest endianness, we should
byteswap the fields we access.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
The I/O-Interruption Subclass field corresponds to bits 2 to 5 (BE
notation) of the Interruption-Identification Word. The value should
be shift by 27 instead of 24.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
* Fix for virtfs-proxy-helper crash
* Gracefully handle the error condition on input validation in virtfs-proxy-helper
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=S8oz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kvaneesh/tags/for-upstream-signed' into staging
VirtFS update:
* Fix for virtfs-proxy-helper crash
* Gracefully handle the error condition on input validation in virtfs-proxy-helper
# gpg: Signature made Tue Jun 16 16:21:28 2015 BST using RSA key ID 04C4E23A
# gpg: Good signature from "Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4846 9DE7 1860 360F A6E9 968C DE41 A4FE 04C4 E23A
* remotes/kvaneesh/tags/for-upstream-signed:
virtfs-proxy-helper: fail gracefully if socket path is too long
virtfs-proxy-helper: add missing long option terminator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace the assertion check with graceful failure when the socket path
is too long. Programs should not crash on invalid input. Print an
error message and exit properly.
Cc: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The getopt_long(3) long options array must have a zeroed terminator.
This patch solves a segmentation fault when an unknown command-line
option is encountered:
$ fsdev/virtfs-proxy-helper --help
Segmentation fault (core dumped)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
second spin with ioctl patch refreshed
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAVX/KMrRIkN7ePJvAAQg02g/+Ny0e+7sZd1ALgLcbxnP8qUgAYKIR0xbl
4iwfJjO8YWeD2x6EkEcb62nPD+ozL6of7DcuoYMeo6BFgZkxkUsGwO+W5N81AJJF
pF9eH/DQwQa6kOUbB2aUIdxR/q1pJ62UKEK8jqfqAtGkSL7r1a4cOQgW8gOPIorv
+lKbN+NYjZM/Ub11wYiqW579d3vfsFqrFeLjDqLv5qRyIY+O/Jr8LgqokAurJH05
WcRuw2mtLWEQZESNdMox2G3UQ6dqZUk6j/ipIVduzfHkmZZqAUrJeKHV2ZTu9rWs
7+Daihremp46ZLGGMgarG6/arDrqplmkWOshT60bm9J6SDiE20QyWJ6YymukGUre
rGbyk9RFBvamzMLns4jdVduFMOFWzgedVSA0cbo/VvuZriRxkzq8fW0o6I72Vlpf
OoEoY+t1M2CJOnOvjuU3z2iu0AwizJ9Xz18pOVHCovSPTWMmItfOt9CVexJIvLKH
DwqsaoaEdao5r5SoxBOM+l0vrh4QK6vLldBQaF46OhEyH3xySMD80cEsSM9lJWQg
lcGFmyQloc57TF0bLeJ5vxBwFBNRUYaKK698PJCG4wqhF+X0DxbFnY5q1QpfUZWv
tlabnqGt9sadYbjJmEHlc9dhXzXa76fvRgIhjlK014g9jL3KAnVWA2q4w2nQOGk0
Yws7IBXoynA=
=tTJW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20150616' into staging
linux-user patches for 2.4 softfreeze
second spin with ioctl patch refreshed
# gpg: Signature made Tue Jun 16 08:03:14 2015 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
* remotes/riku/tags/pull-linux-user-20150616:
linux-user: ioctl() command type is int
linux-user: fix the breakpoint inheritance in spawned threads
linux-user: use __get_user and __put_user in cmsg conversions
linux-user: Fix length handling in host_to_target_cmsg
linux-user: Use abi_ulong for TARGET_ELF_PAGESTART
linux-user: Allocate thunk size dynamically
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When executing a 64bit target chroot on 64bit host,
the ioctl() command can mismatch.
It seems the previous commit doesn't solve the problem in
my case:
9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets
For example, a ppc64 chroot on an x86_64 host:
bash-4.3# ls
Unsupported ioctl: cmd=0x80087467
Unsupported ioctl: cmd=0x802c7415
The origin of the problem is in syscall.c:do_ioctl().
static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg)
In this case (ppc64) abi_long is long (on the x86_64), and
cmd = 0x0000000080087467
then
if (ie->target_cmd == cmd)
target_cmd is int, so target_cmd = 0x80087467
and to compare an int with a long, the sign is extended to 64bit,
so the comparison is:
if (0xffffffff80087467 == 0x0000000080087467)
which doesn't match whereas it should.
This patch uses int in the case of the target command type
instead of abi_long.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: Thierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.
(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
* we required the msg->msg_controllen to declare the buffer
to have enough space for final trailing padding (we were
checking against CMSG_SPACE), whereas the kernel does not
require this, and common userspace code assumes this. (In
particular, glibc's "try to talk to nscd" code that it will
run on startup will receive a cmsg with a 4 byte payload and
only allocate 4 bytes for it, which was causing us to do
the wrong thing on architectures that need 8-alignment.)
* we weren't correctly handling the fact that the SO_TIMESTAMP
payload may be larger for the target than the host
* we weren't marking the messages with MSG_CTRUNC when we did
need to truncate a message that wasn't truncated by the host,
but were instead logging a QEMU message; since truncation is
always the result of a guest giving us an insufficiently
sized buffer, we should report it to the guest as the kernel
does and don't log anything
Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* Handle "extended small page" descriptors correctly
* Use extended address bits from supersection short descriptors
* Update interrupt status for all cores in gic_update
* Fix off-by-one in exynos4210_fimd bit-swap code
* Remove stray unused 'pending_exception' field
* Add Cortex-A53 KVM support
* Fix reset value of REVIDR
* Add AArch32 MIDR aliases for ARMv8 cores
* MAINTAINERS update for ARM ACPI code
* Trust the kernel's value of MPIDR if we're using KVM
* Various pxa2xx device updates to avoid old APIs
* Mark pxa2xx copro registers as ARM_CP_IO so -icount works
* Correctly UNDEF Thumb2 DSP insns on Cortex-M3
* Initial work towards implementing PMSAv7
* Fix a reset order bug introduced recently
* Correct "preferred return address" for cpreg access exceptions
* Add ACPI SPCR table for the virt board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m0HJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20150615' into staging
target-arm queue:
* Handle "extended small page" descriptors correctly
* Use extended address bits from supersection short descriptors
* Update interrupt status for all cores in gic_update
* Fix off-by-one in exynos4210_fimd bit-swap code
* Remove stray unused 'pending_exception' field
* Add Cortex-A53 KVM support
* Fix reset value of REVIDR
* Add AArch32 MIDR aliases for ARMv8 cores
* MAINTAINERS update for ARM ACPI code
* Trust the kernel's value of MPIDR if we're using KVM
* Various pxa2xx device updates to avoid old APIs
* Mark pxa2xx copro registers as ARM_CP_IO so -icount works
* Correctly UNDEF Thumb2 DSP insns on Cortex-M3
* Initial work towards implementing PMSAv7
* Fix a reset order bug introduced recently
* Correct "preferred return address" for cpreg access exceptions
* Add ACPI SPCR table for the virt board
# gpg: Signature made Mon Jun 15 18:19:34 2015 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20150615: (28 commits)
hw/arm/virt-acpi-build: Add SPCR table
ACPI: Add definitions for the SPCR table
target-arm: Correct "preferred return address" for cpreg access exceptions
hw/arm/boot: fix rom_reset notifier registration order
arm: helper: rename get_phys_addr_mpu
arm: Add has-mpu property
arm: Implement uniprocessor with MP config
arm: Refactor get_phys_addr FSR return mechanism
arm: helper: Factor out CP regs common to [pv]msa
arm: Don't add v7mp registers in MPU systems
arm: Do not define TLBTR in PMSA systems
target-arm: Add the THUMB_DSP feature
hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOps
hw/arm/pxa2xx: Convert pxa2xx-ssp to VMState
hw/arm/pxa2xx: Add reset method for pxa2xx_ssp
hw/arm/pxa2xx: Convert pxa2xx-fir to QOM and VMState
hw/arm/pxa2xx: Mark coprocessor registers as ARM_CP_IO
target-arm: Use the kernel's idea of MPIDR if we're using KVM
MAINTAINERS: Add myself as ARM ACPI Subsystem maintainer
target-arm: add AArch32 MIDR aliases in ARMv8
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-3-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SPCR is the Serial Port Console Redirection Table. See the document
linked from http://uefi.org/acpi. For serial port types, "Interface
Type", see the documentation for the Debug Port Table 2 (DBG2).
Signed-off-by: Andrew Jones <drjones@redhat.com>
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-2-git-send-email-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The architecture defines that when taking an exception trying to
access a coprocessor register, the "preferred return address" for
the exception is the address of the instruction that caused the
exception. Correct an off-by-4 error which meant we were returning
the address after the instruction for traps which happened because
of a failure of a runtime access-check function on an AArch32
register. (Traps caused by translate-time checkable permissions
failures had the correct address, as did traps on AArch64 registers.)
This fixes https://bugs.launchpad.net/qemu/+bug/1463338
Reported-by: Robert Buhren <robert@robertbuhren.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
commit ac9d32e396 had the consequence to
register the do_cpu_reset after the rom_reset one. Hence they get
executed in the wrong order. This commit restores the registration of
do_cpu_reset in arm_load_kernel.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Reported-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434111582-9325-1-git-send-email-eric.auger@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For processors that support MPUs, add a property to de-feature it. This
is similar to the implementation of the EL3 feature.
The processor definition in init sets ARM_FEATURE_MPU if it can support
an MPU. post_init exposes the property, defaulting to true. If cleared
by the instantiator, ARM_FEATURE_MPU is then removed at realize time.
This is to support R profile processors that may or may-not have an MPU
configured.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a boolean for indicating uniprocessors with MP extensions. This
drives the U bit in MPIDR. Prepares support for Cortex-R5.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a70a80583df265e0174f01fa1fc92b33ea6d1db5.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, the return code for get_phys_addr is overloaded for both
success/fail and FSR value return. This doesn't handle the case where
there is an error with a 0 FSR. This case exists in PMSAv7.
So rework get_phys_addr and friends to return a success/failure boolean
return code and populate the FSR via a caller provided uint32_t
pointer.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: a209e3d8ae00cda55260c970891f520210e26bad.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
V6+ PMSA and VMSA share some common registers that are currently
in the VMSA definition block. Split them out into a new def that can
be shared to PMSA.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 284db78a43c63c9bfbb60de539672c361bcb6af8.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
These registers are VMSA specific so they should be conditional on
VMSA (i.e. !MPU).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP.
The def is done separately from VMSA registers group as it is affected
by both the OMAP/STRONGARM RW errata and the MIDR backgrounding.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of
the 85 DSP instructions (these are all Thumb2). This is enabled for
all non-M-profile CPUs with Thumb2 support, as the instructions are
mandatory for R and A profiles. On M profile they are optional and
not present in the Cortex-M3 (though they are in the M4).
The effect of this commit is that we will now treat the DSP
encodings as illegal instructions on M3, when previously we
incorrectly implemented them.
Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com>
Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com
[PMM: added clz/crc32/crc32c and default case to the early-decode switch;
minor format/spacing fixups; reworded commit message a bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update the pxa2xx_mmci device to stop using the old_mmio read
and write callbacks in its MemoryRegionOps. This actually
simplifies the code because the separate byte/halfword/word
access functions were all calling into a single function to
do the work anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
The pxa2xx-ssp device is already a QOM device but is still
using the old-style register_savevm(); convert to VMState.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-5-git-send-email-peter.maydell@linaro.org
The pxa2xx_ssp device was missing a reset method; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter..crosthwaite@xilinx.com>
Message-id: 1434117989-7367-4-git-send-email-peter.maydell@linaro.org
Convert the pxa2xx-fir device to QOM, including using a
VMState for its migration info.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-3-git-send-email-peter.maydell@linaro.org
The pxa2xx custom coprocessor registers in cp6 and cp14 do device
accesses, so mark the non-constant regs as ARM_CP_IO so that
icount works correctly and doesn't abort.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1434117989-7367-2-git-send-email-peter.maydell@linaro.org
When we're using KVM, the kernel's internal idea of the MPIDR
affinity fields must match the values we tell it for the guest
vcpu cluster configuration in the device tree. Since at the moment
the kernel doesn't support letting userspace tell it the correct
affinity fields to use, we must read the kernel's view and
reflect that back in the device tree.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com
[PMM: Use a local #define rather than a global variable for
the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the
commit message.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add Shannon Zhao as the maintainer for the ARM ACPI Subsystem.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@huawei.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433248318-6076-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARMv8 ARM, there are additional aliases to MIDR system register in
AArch32 state. So add them to the list.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let
REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add cortex-a53 cpu support in machine virt, so it can be used for TCG
and KVM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1433207452-4512-3-git-send-email-shannon.zhao@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since commit e353102(target-arm: cpu64: Add support for Cortex-A53) has
added Cortex-A53 cpu support for target-arm, this patch just enables it
for kvm-arm.
Here adding XGENE_POTENZA just makes the enum continuous.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org
[PMM: Don't add the CPU types to cpus_to_try[]; this array only
lists old CPUs which were supported in pre-PREFERRED_TARGET kernels]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This isn't used by any of the code. In fact it looks like it was never
used as it came in with ARMv7 support.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
fimd_swap_data() includes code to reverse the bits in a
64-bit integer, but an off-by-one error meant that it would
try to shift off the top of the integer. Correct the bug
(spotted by Coverity).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1432912615-23107-1-git-send-email-peter.maydell@linaro.org
This patch fixes so that gic_update always updates all the cores with
new pending irq states. If the function returns early it is possible
to get interrupts that has already been acknowledged.
Signed-off-by: Johan Karlsson <johan.karlsson@enea.com>
[PMM: rebased to apply to current master]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since ARMv7 with LPAE support, a supersection short translation table
descriptor has had extended base address fields which hold bits 39:32 of
translated address. These fields are IMPDEF in ARMv6 and ARMv7 without
LPAE support.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>