This fixes a problem that after guest panic happens, virsh dump without
--memory-only fails:
ERROR: invalid runstate transition: 'guest-panicked' -> 'finish-migrate'
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369046780-17498-1-git-send-email-pbonzini@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When register and open a chardev udp, the backend name should be udp
not dgram, and we do not have backend dgram in the chardev list. This
patch makes the new qapi udp backend consistent with the original
udp device.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM
support for the IDE macio emulation driver, introduced in d353fb72.
The call to dma_bdrv_io() is using a wrong opaque of type IDEState
instead of DBDMA_io. This patch fixes that.
Fixes LP#1179104
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
First we need to clear the bit and then we set the given value.
Instruction ADDSC sets the bit and instruction ADDWC uses this bit.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This change makes sure that modifications of pos field in the DSPControl
register do not trash other bits in the register. This bug can be triggered
with the additional test case in mips32-dsp/extpdp.c in this commit.
In addition to this, this change corrects incorrect calculation of the mask
for EXTPDP.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The mask for EXTP instruction when size=31 has not been correctly
calculated.
The test (mips32-dsp/extp.c) has been extended to include the case that
triggers the issue.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* mdroth/qga-pull-2013-05-13:
qga: unlink just created guest-file if fchmod() or fdopen() fails on it
qga: distinguish binary modes in "guest_file_open_modes" map
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 7161082c8d.
Reverting this patch fixes a divide-by-zero error in qemu that can be
fairly reliably triggered by doing block migration. In this case, the
configuration/error was:
source: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios
-M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd
boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive
file=disk1.img,if=virtio -drive file=disk2.img,if=virtio -device
virtio-net-pci,netdev=net0 -netdev user,id=net0 -monitor
unix:/tmp/vm-hmp.sock,server,nowait -qmp
unix:/tmp/vm-qmp.sock,server,nowait -vnc :100
16837 Floating point exception(core dumped)
target: temp/x86_64-softmmu/qemu-system-x86_64 -enable-kvm -L temp-bios
-M pc-i440fx-1.4 -m 512M -kernel boot/vmlinuz-x86_64 -initrd
boot/test-initramfs-x86_64.img.gz -vga std -append seed=1234 -drive
file=target_disk1.img,if=virtio -drive file=target_disk2.img,if=virtio
-device virtio-net-pci,netdev=net0 -netdev user,id=net0 -incoming
unix:/tmp/migrate.sock -monitor
unix:/tmp/vm-hmp-incoming.sock,server,nowait -qmp
unix:/tmp/vm-qmp-incoming.sock,server,nowait -vnc :101
Receiving block device images
20 %
21 %
load of migration failed
This revert potentially re-introduces a bug that was present in 1.4,
but fixes a prevalent issue with block migration so we should revert
it for now and take an updated patch later.
Conflicts:
migration.c
* fixed up to remove logic introduced in 7161082c while leaving
changes in HEAD intact
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1368739544-31021-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch reverts part of 5e3bc735d9.
Paolo Bonzini wrote this patch and commented:
"WSAEventSelect is edge-triggered and the event will not be signaled if
the socket handler does not consume all the data in the socket buffer."
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718561-7816-3-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
pollfds_fill() and pollfds_poll() translate GPollFD to rfds/wfds/xfds
for sockets on win32. select(2) is the underlying system call which is
used to monitor sockets for activity.
Currently file descriptors that monitor G_IO_ERR will be included in
both rfds and wfds. As a result, select(2) will report writability on
file descriptors where we only really wanted to monitor readability
(with errors).
slirp_pollfds_poll() hit this issue: UDP sockets are blocking sockets so
we hang in sorecvfrom() when G_IO_ERR is set due to the socket being
writable (we only wanted to check for readability).
This patch fixes the slirp_pollfds_poll() hang.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1368718561-7816-2-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds virtio_bus_get_dev_path to fix migration id string which is wrong
since the virtio refactoring.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368723967-21050-1-git-send-email-fred.konrad@greensocs.com
Cc: mdroth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michael Roth (1) and Zhangleiqiang (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
qapi: fix leak in unit tests
qmp: fix handling of cmd with Equals in qmp-shell
Message-id: 1368625179-27962-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Mac OS X ppc, altivec.h defines "vector", leading to build breakage
when used as variable name, e.g. in tracing code.
Fix this by undefining identifiers after altivec.h inclusion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1368632771-4328-1-git-send-email-andreas.faerber@web.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The test case passes on big endian hosts now (tested on ppc64)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1368622839-7084-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although we try our best to automatically detect broken versions
of Linux which assume the old broken IRQ mapping we used to implement
for our model of the Versatile PCI controller, it turns out that
some particularly new kernels manage to outwit the autodetection.
We therefore provide a property for enabling the old broken IRQ
mapping, so that if users happen to have such a kernel they can
work around its deficiencies with the command line option:
-global versatile_pci.broken-irq-mapping=1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Newer versatilepb kernels still don't get the IRQ mapping right
for the PCI controller, but they get it differently wrong (they add
a fixed +64 offset to everything they write to PCI_INTERRUPT_LINE).
Update the autodetection to handle these too, and include a more
detailed comment on the various different behaviours that might
be present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 5f37ef92b7.
It turns out that some kernels incorrectly depend on the
old QEMU behaviour of not putting the host PCI bridge device
where the hardware puts it, because they use a swizzling IRQ
mapping which is incorrect but happens to match up with old
broken QEMU when the slot number mod 4 is zero. Since we
start PCI devices at 11, if we put the host bridge at 29
then the first real PCI device goes at 11 and doesn't work.
Not putting the host bridge at 29 means it defaults to 11,
so the first real PCI device is at 12 and works.
Since continuing with the old behaviour doesn't cause problems
for kernels which do work with hardware, the simplest fix for
this is to revert the change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The latest version of MinGW needs a test for __sync_val_compare_and_swap
to fix a missing symbol linker error.
Reported-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1368301619-32097-2-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 7791dba3ec broke compilation on MacOSX, because it introduced
a new include of util.h. On MacOSX this includes pwd.h which in turn
includes the system uuid/uuid.h, which causes a compile failure if
QEMU was configured without CONFIG_UUID due to a conflict between
the system header and our fallback versions:
block/vdi.c:124:20: error: static declaration of 'uuid_generate'
follows non-static declaration
static inline void uuid_generate(uuid_t out)
^
/usr/include/uuid/uuid.h:63:6: note: previous declaration is here
void uuid_generate(uuid_t out);
^
Fix this breakage by improving configure's check for uuid to work on
MacOSX (where there is no need to link in a separate libuuid).
Note that if the user explicitly runs configure with '--disable-uuid'
on MacOSX then QEMU will fail to compile.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368563799-22755-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The ledstate should be compared before modifiers updated,
otherwise the ledstate would be the same as current_led_state.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1368606040-11950-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds virtio_net_set_netclient_name, which is used to set the
name and type shown in "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qmp_output_get_qobject() increments the qobject's reference count. Since
we currently pass this straight into qobject_to_json() so we can feed
the data into a QMP input visitor, we never actually free the underlying
qobject when qmp_output_visitor_cleanup() is called. This causes leaks
on all of the QMP serialization tests.
Fix this by holding a pointer to the qobject and decref'ing it before
returning from qmp_deserialize().
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qmp: fix handling of cmd with equal mark in qmp-shell
qmp-shell splits the argument and value of input command
by equal mark("="). But there are commands whose values
include equal mark themselves, and the json built by
qmp-shell will not correct. For example, when using NBD as
the target of block-backup command, the input
"block-backup target=nbd+unix:///drive0?socket=/tmp/nbd.sock"
will fail, because the json built will be as follows:
{
"execute":"block-backup",
"arguments":{"target":"nbd+unix:///drive0?socket"}
}
Fix it by joining the sections split by equal mark excluding the
first section in __build_cmd function when the length of sections
is larger than two.
Signed-off-by: zhangleiqiang <zhangleiqiang@huawei.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Kevin Wolf
# Via Stefan Hajnoczi
* stefanha/block:
block: Add hint to -EFBIG error message
qcow2: Catch some L1 table index overflows
Message-id: 1368543269-29784-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The limit of qcow2 files at least depends on the cluster size. If the
image format has a cluster_size option, suggest to increase it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This catches the situation that is described in the bug report at
https://bugs.launchpad.net/qemu/+bug/865518 and goes like this:
$ qemu-img create -f qcow2 huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
$ qemu-io /tmp/huge.qcow2 -c "write $((1024*1024*1024*1024*1024*1024 - 1024)) 512"
Segmentation fault
With this patch applied the segfault will be avoided, however the case
will still fail, though gracefully:
$ qemu-img create -f qcow2 /tmp/huge.qcow2 $((1024*1024))T
Formatting 'huge.qcow2', fmt=qcow2 size=1152921504606846976 encryption=off cluster_size=65536 lazy_refcounts=off
qemu-img: The image size is too large for file format 'qcow2'
Note that even long before these overflow checks kick in, you get
insanely high memory usage (up to INT_MAX * sizeof(uint64_t) = 16 GB for
the L1 table), so with somewhat smaller image sizes you'll probably see
qemu aborting for a failed g_malloc().
If you need huge image sizes, you should increase the cluster size to
the maximum of 2 MB in order to get higher limits.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes the Home/End keys in the monitor using the GTK frontend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1368526554-15866-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should fix building the GTK+ front-end on BSDs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a small typename cache to ObjectClass. This allows
caching positive casts within each ObjectClass. Benchmarking a
PPC workload provided by Aurelien, this patch eliminates every
single g_hash_table_lookup() happening during the benchmark (which
was about 2 million per-second).
With this patch applied, I get exactly the same performance (within
the margin of error) as with --disable-qom-cast-debug.
N.B. it's safe to cache typenames only from the _assert() macros
because they are always called with string literals.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 9697f5d2d3 "gtk: custom cursor support"
introduced unconditional usage of gdk_display_warp_pointer(). This function
is marked as deprecated since GTK-3.0, and triggers warning (error with -Werror)
during compilation.
Conditionally change gdk_display_warp_pointer() method usage to gdk_device_warp
usage, as suggested by compiler.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1368197985-44608-1-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 9953f8822c.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cast debugging can have a substantial cost (20% or more). Instead of adding
special-cased "fast casts" in the hot paths, we can just disable it in
releases. The tracing facilities we just added make it easier to analyze
those problems that cast debugging would reveal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-7-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This provides a way to detect the cast that leads to a (reproducible)
crash even when QOM cast debugging is disabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-6-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For leaf classes, in many cases the callbacks will simply downcast
the object back to the original class. Add this fast path to
object_class_dynamic_cast, object_dynamic_cast will inherit it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This mimics what we do in object_dynamic_cast_assert.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368188203-3407-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In Windows guests this may make a difference.
Since the original patch (commit c689b4f1) sought to be pedantic and to
consider theoretical corner cases of portability, we should fix it up
where it failed to come through in that pursuit.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# By Dong Xu Wang (2) and others
# Via Michael Tokarev
* mjt/trivial-patches-next:
osdep.h: include sys/types.h for ssize_t definition
remove double semicolons
clean unnecessary code: don't check g_strdup arg for NULL
docs: mention AddressSpaces in docs/memory.txt
audio: update documentation after removing --audio-card-list option
m25p80.c: Sync Flash chip list with Linux
bsd-user: OS-agnostic 64-bit SYSCTL types
Message-id: 518F61B9.9050803@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Hans de Goede
# Via Gerd Hoffmann
* spice/spice.v70:
qxl: Call spice_qxl_driver_unload from qxl_enter_vga_mode
Message-id: 1368093776-8949-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
sys/types.h is taken out from "ifdef __OpenBSD__" guard. It should be
safe for other systems, according to following survey:
http://hacks.owlfolio.org/header-survey/
This fixes build for CONFIG_IOVEC-less systems (mingw).
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>