... and remove some SCSIDevice variables or fields that now become unused.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the common part of scsi-disk.c and scsi-generic.c to the SCSI layer.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The SCSI spec has a quite detailed list of sense codes available.
It even mandates the use of specific ones for some failure cases.
The current implementation just has one type of generic error
which is actually a violation of the spec in certain cases.
This patch introduces various predefined sense codes to have the
sense code reporting more in line with the spec.
On top of Hannes's patch I fixed the reply to REQUEST SENSE commands
with DESC=0 and a small (<18) length.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is for when the request must be dropped in the void,
but still memory should be freed. To this end, the devices
register a second callback in SCSIBusOps.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This covers the case of canceling a request's I/O and still
completing it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The code for canceling requests upon reset is already the same. Clean
it up and move it to scsi-bus.c.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Currently the SCSIRequest structure is abstracted away and cannot accessed
directly from the driver. This requires the handler to do a lookup on
an abstract 'tag' which identifies the SCSIRequest structure.
With this patch the SCSIRequest structure is exposed to the driver. This
allows use to use it directly as an argument to the SCSIDeviceInfo
callback functions and remove the lookup.
A new callback function 'alloc_req' is introduced matching 'free
req'; unref'ing to free up resources after use is moved into the
scsi_command_complete callbacks.
This temporarily introduces a leak of requests that are cancelled,
when they are removed from the queue and not from the driver. This
is fixed later by introducing scsi_req_cancel. That patch in turn
depends on this one, because the argument to scsi_req_cancel is a
SCSIRequest.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
With the next patch, a device may hold SCSIRequest for an indefinite
time. Split a rather big patch, and protect against access errors,
by reference counting them.
There is some ugliness in scsi_send_command implementation due to
the need to unref the request when it fails. This will go away
with the next patches, which move the unref'ing to the devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
If a request is canceled after it has been completed, scsi_cancel_io
would pass a stale aiocb to bdrv_aio_cancel. Avoid this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
There are more operations than a SCSI bus can handle, besides completing
commands. One example, which this series will introduce, is cleaning up
after a request is cancelled.
More long term, a "SCSI bus" can represent the LUNs attached to a
target; in this case, while all commands will ultimately reach a logical
unit, it is the target who is in charge of answering REPORT LUNs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
This abstracts calling the command_complete callback, reducing churn
in the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
scsi-generic scsi_read_complete() should not -both- call the client
complete callback with SCSI_REASON_DATA -and- call
scsi_command_complete(). The former will cause the client to queue a
new read or write request, while the later will free the request data
structure, thus causing the new read or write request to use a
freed/stale structure when it completes.
This patch fixes the bug, fixing a crash with scsi-generic & RHEL5.5
installer.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The --disable-slirp option was undocumented; add it to configure's
--help output.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a preprocessor #define which is never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the input to a Neon float comparison is a quiet NaN, the ARM ARM
specifies that we should raise InvalidOp if the comparison is GE or GT
but not for EQ. (Signaling NaNs raise InvalidOp regardless). This means
only EQ should use the _quiet version of the comparison function.
We implement this by cleaning up the comparison helpers to call the
appopriate versions of the softfloat simple comparison functions
(float32_le and friends) rather than the generic float32_compare functions.
This makes them simple enough that they are clearer opencoded rather
than macroised.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon versions of int-float conversions must use the "standard FPSCR"
rather than the default FPSCR. Implement this by having the helper
functions take a pointer to the appropriate float_status value rather
than simply taking a pointer to the entire CPUState, and making
translate.c pass a pointer to vfp.fp_status or vfp.standard_fp_status
appropriately for whether the instruction being translated is Neon
or VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ARM the architecture mandates that when an output denormal is flushed to
zero we must set the FPSCR UFC (underflow) bit, so map softfloat's
float_flag_output_denormal accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a new float_flag_output_denormal which is set when the result
of a floating point operation would be denormal but is flushed to
zero because we are in flush_to_zero mode. This is necessary because
some architectures signal this condition as an underflow and others
signal it as an inexact result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers for VRECPE.F32, VSQRTE.F32, VRECPS and VRSQRTS handle denormals
as special cases, so we must set the InputDenormal exception flag ourselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functions which do the core estimation algorithms for the VRSQRTE
and VRECPE instructions should not set floating point exception flags,
so use a local fp status for doing these calculations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If an op with dead outputs is not removed, because it has side effects
or has multiple output and only one dead, mark the registers as dead
instead of saving them. This avoid a few register spills on TCG targets
with low register count, especially with div2 and mul2 ops, or when a
qemu_ld* result is not used (prefetch emulation for example).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If an op is not removed and has dead output arguments, mark it
in op_dead_args similarly to what is done for input arguments.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow all args to be dead by replacing the input specific op_dead_iargs
variable by op_dead_args. Note this is a purely mechanical change.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
Fix a bug in mtsr/mtsrin emulation on ppc64
pSeries: Clean up write-only variables
w32: Fix compilation and replace non-portable usage of ulong
* 's390-next' of git://repo.or.cz/qemu/agraf:
s390x: complain when allocating ram fails
s390x: fix memory detection for guests > 64GB
s390x: change mapping base to allow guests > 2GB
s390x: Fix debugging for unknown sigp order codes
s390x: build s390x by default
s390x: remove compatibility cc field
s390x: Adjust GDB stub
s390x: translate engine for s390x CPU
s390x: Adjust internal kvm code
s390x: Implement opcode helpers
s390x: helper functions for system emulation
s390x: Shift variables in CPUState for memset(0)
s390x: keep hint on virtio managing size
s390x: make kvm exported functions conditional on kvm
s390x: s390x-linux-user support
tcg: extend max tcg opcodes when using 64-on-32bit
s390x: fix smp support for kvm
The SDIO specification introduces new commands 52 and 53.
Handle as illegal command but do not complain on stderr,
as SDIO-aware OSes (including Linux) may legitimately use
these in their probing for presence of an SDIO card.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove a duplicate #include of sysbus.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
If pic_irq is greater than 7, the irq level is always 0 on 32bits.
Signed-off-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
tb_invalidate_page_range() was intended to be used to invalidate an
area of a TB which the guest explicitly flushes from i-cache. However,
QEMU detects writes to code areas where TBs have been generated, so
his has never been useful.
Delete the function, adjust callers.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Early ppc64 CPUs include a hack to partially simulate the ppc32 segment
registers, by translating writes to them into writes to the SLB. This is
not used by any current Linux kernel, but it is used by the openbios used
in the qemu mac99 model.
Commit 81762d6dd0, cleaning up the SLB
handling introduced a bug in this code, breaking the openbios currently in
qemu. Specifically, there was an off by one error bitshuffling the
register format used by mtsr into the format needed for the SLB load,
causing the flag bits to end up in the wrong place. This caused the
storage keys to be wrong under openbios, meaning that the translation code
incorrectly thought a legitimate access was a permission violation.
This patch fixes the bug, at the same time it fixes some build bug in the
MMU debugging code (only exposed when DEBUG_MMU is enabled).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
A few pieces of the pSeries emulation code have variables which are set
but never used, which causes warnings on gcc 4.6. This patch removes
these instances.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
ulong is undefined for w32 (and maybe other) compilations.
Replace it by uintptr_t (which also fixes compilation for w64
and is a better choice for pointer to integer conversions).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
While trying out the > 64GB guest RAM patch, I hit some virtual address
limitations of my host system, which resulted in mmap failing. Unfortunately,
qemu didn't tell me about this failure, but just used the NULL pointer
happily, resulting in either segmentation faults or other fun errors.
To spare other users from tracing this down, let's print a nice message
instead so the user can figure out what's wrong from there.
Signed-off-by: Alexander Graf <agraf@suse.de>
the s390 memory detection has a 16bit field that specifies the amount of
increments. This patch adopts the memory size to always fit into that
scheme. This also fixes virtio detection for these guests, since the
descriptor page is located after the main memory.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
the current s390x qemu memory layout is
0x1000000: guest start
0x80000000: qemu binary
which limits the amount of available memory to <2GB.
This patch moves the guest pages to 32GB to not collide with the binary
and to leave some space for the program break of qemu.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
On unknown sigp order codes we print a debug message. This patch
fixes the output, since we want to see the order_code and not
the register numbers.
Patch applies on agraf tree.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We have successfully lazilized cc computation, so we need to manually
trigger its calculation when gdb wants to fetch it. We also changed the
variable name, so writing it writes into a different field now.
Signed-off-by: Alexander Graf <agraf@suse.de>
This is the main meat part of the patch set. It implements emulation for an
s390x CPU.
The code does all the optimizations that are common for TCG code:
- direct branches
- cc optimization
- unrolling of simple microcode loops
I'm still open for suggestions on speedups of course :).
Signed-off-by: Alexander Graf <agraf@suse.de>
We're now finally emulating an s390x CPU, so we can move quite some logic
from the kvm code out into generic CPU code.
This patch does this and adjusts the interfaces according to what the code
around now expects to be able to call.
Signed-off-by: Alexander Graf <agraf@suse.de>
There are some instructions that can't (or shouldn't) be expressed by pure
tcg code. For those, we call into externally compiled C functions.
This patch implements those C functions.
Signed-off-by: Alexander Graf <agraf@suse.de>
