Convert the VADD instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VNMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMUL instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLA instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VNMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLS instruction to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP VMLA instruction to decodetree.
This is the first of the VFP 3-operand data processing instructions,
so we include in this patch the code which loops over the elements
for an old-style VFP vector operation. The existing code to do this
looping uses the deprecated cpu_F0s/F0d/F1s/F1d TCG globals; since
we are going to be converting instructions one at a time anyway
we can take the opportunity to make the new loop use TCG temporaries,
which means we can do that conversion one operation at a time
rather than needing to do it all in one go.
We include an UNDEF check which was missing in the old code:
short-vector operations (with stride or length non-zero) were
deprecated in v7A and must UNDEF in v8A, so if the MVFR0 FPShVec
field does not indicate that support for short vectors is present
we UNDEF the operations that would use them. (This is a change
of behaviour for Cortex-A7, Cortex-A15 and the v8 CPUs, which
previously were all incorrectly allowing short-vector operations.)
Note that the conversion fixes a bug in the old code for the
case of VFP short-vector "mixed scalar/vector operations". These
happen where the destination register is in a vector bank but
but the second operand is in a scalar bank. For example
vmla.f64 d10, d1, d16 with length 2 stride 2
is equivalent to the pair of scalar operations
vmla.f64 d10, d1, d16
vmla.f64 d8, d3, d16
where the destination and first input register cycle through
their vector but the second input is scalar (d16). In the
old decoder the gen_vfp_F1_mul() operation uses cpu_F1{s,d}
as a temporary output for the multiply, which trashes the
second input operand. For the fully-scalar case (where we
never do a second iteration) and the fully-vector case
(where the loop loads the new second input operand) this
doesn't matter, but for the mixed scalar/vector case we
will end up using the wrong value for later loop iterations.
In the new code we use TCG temporaries and so avoid the bug.
This bug is present for all the multiply-accumulate insns
that operate on short vectors: VMLA, VMLS, VNMLA, VNMLS.
Note 2: the expression used to calculate the next register
number in the vector bank is not in fact correct; we leave
this behaviour unchanged from the old decoder and will
fix this bug later in the series.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Expand out the sequences in the new decoder VLDR/VSTR/VLDM/VSTM trans
functions which perform the memory accesses by going via the TCG
globals cpu_F0s and cpu_F0d, to use local TCG temps instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP load/store multiple insns to decodetree.
This includes tightening up the UNDEF checking for pre-VFPv3
CPUs which only have D0-D15 : they now UNDEF for any access
to D16-D31, not merely when the smallest register in the
transfer list is in D16-D31.
This conversion does not try to share code between the single
precision and the double precision versions; this looks a bit
duplicative of code, but it leaves the door open for a future
refactoring which gets rid of the use of the "F0" registers
by inlining the various functions like gen_vfp_ld() and
gen_mov_F0_reg() which are hiding "if (dp) { ... } else { ... }"
conditionalisation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP single load/store insns VLDR and VSTR to decodetree.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VFP two-register transfer instructions to decodetree
(in the v8 Arm ARM these are the "Advanced SIMD and floating-point
64-bit move" encoding group).
Again, we expand out the sequences involving gen_vfp_msr() and
gen_msr_vfp().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "single-precision" register moves to decodetree:
* VMSR
* VMRS
* VMOV between general purpose register and single precision
Note that the VMSR/VMRS conversions make our handling of
the "should this UNDEF?" checks consistent between the two
instructions:
* VMSR to MVFR0, MVFR1, MVFR2 now UNDEF from EL0
(previously was a nop)
* VMSR to FPSID now UNDEFs from EL0 or if VFPv3 or better
(previously was a nop)
* VMSR to FPINST and FPINST2 now UNDEF if VFPv3 or better
(previously would write to the register, which had no
guest-visible effect because we always UNDEF reads)
We also tighten up the decode: we were previously underdecoding
some SBZ or SBO bits.
The conversion of VMOV_single includes the expansion out of the
gen_mov_F0_vreg()/gen_vfp_mrs() and gen_mov_vreg_F0()/gen_vfp_msr()
sequences into the simpler direct load/store of the TCG temp via
neon_{load,store}_reg32(): we know in the new function that we're
always single-precision, we don't need to use the old-and-deprecated
cpu_F0* TCG globals, and we don't happen to have the declaration of
gen_vfp_msr() and gen_vfp_mrs() at the point in the file where the
new function is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the "double-precision" register moves to decodetree:
this covers VMOV scalar-to-gpreg, VMOV gpreg-to-scalar and VDUP.
Note that the conversion process has tightened up a few of the
UNDEF encoding checks: we now correctly forbid:
* VMOV-to-gpr with U:opc1:opc2 == 10x00 or x0x10
* VMOV-from-gpr with opc1:opc2 == 0x10
* VDUP with B:E == 11
* VDUP with Q == 1 and Vn<0> == 1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
The accesses of elements < 32 bits could be improved by doing
direct ld/st of the right size rather than 32-bit read-and-shift
or read-modify-write, but we leave this for later cleanup,
since this series is generally trying to stick to fixing
the decode.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The current VFP code has two different idioms for
loading and storing from the VFP register file:
1 using the gen_mov_F0_vreg() and similar functions,
which load and store to a fixed set of TCG globals
cpu_F0s, CPU_F0d, etc
2 by direct calls to tcg_gen_ld_f64() and friends
We want to phase out idiom 1 (because the use of the
fixed globals is a relic of a much older version of TCG),
but idiom 2 is quite longwinded:
tcg_gen_ld_f64(tmp, cpu_env, vfp_reg_offset(true, reg))
requires us to specify the 64-bitness twice, once in
the function name and once by passing 'true' to
vfp_reg_offset(). There's no guard against accidentally
passing the wrong flag.
Instead, let's move to a convention of accessing 64-bit
registers via the existing neon_load_reg64() and
neon_store_reg64(), and provide new neon_load_reg32()
and neon_store_reg32() for the 32-bit equivalents.
Implement the new functions and use them in the code in
translate-vfp.inc.c. We will convert the rest of the VFP
code as we do the decodetree conversion in subsequent
commits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Move the trans_*() functions we've just created from translate.c
to translate-vfp.inc.c. This is pure code motion with no textual
changes (this can be checked with 'git show --color-moved').
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VCVTA/VCVTN/VCVTP/VCVTM instructions to decodetree.
trans_VCVT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VRINTA/VRINTN/VRINTP/VRINTM instructions to decodetree.
Again, trans_VRINT() is temporarily left in translate.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VMINNM and VMAXNM instructions to decodetree.
As with VSEL, we leave the trans_VMINMAXNM() function
in translate.c for the moment.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Convert the VSEL instructions to decodetree.
We leave trans_VSEL() in translate.c for now as this allows
the patch to show just the changes from the old handle_vsel().
In the old code the check for "do D16-D31 exist" was hidden in
the VFP_DREG macro, and assumed that VFPv3 always implied that
D16-D31 exist. In the new code we do the correct ID register test.
This gives identical behaviour for most of our CPUs, and fixes
previously incorrect handling for Cortex-R5F, Cortex-M4 and
Cortex-M33, which all implement VFPv3 or better with only 16
double-precision registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
At the moment our -cpu max for AArch32 supports VFP short-vectors
because we always implement them, even for CPUs which should
not have them. The following commits are going to switch to
using the correct ID-register-check to enable or disable short
vector support, so we need to turn it on explicitly for -cpu max,
because Cortex-A15 doesn't implement it.
We don't enable this for the AArch64 -cpu max, because the v8A
architecture never supports short-vectors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The Cortex-R5F initfn was not correctly setting up the MVFR
ID register values. Fill these in, since some subsequent patches
will use ID register checks rather than CPU feature bit checks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the VFP access checking code so that we can use it in the
leaf functions of the decodetree decoder.
We call the function full_vfp_access_check() so we can keep
the more natural vfp_access_check() for a version which doesn't
have the 'ignore_vfp_enabled' flag -- that way almost all VFP
insns will be able to use vfp_access_check(s) and only the
special-register access function will have to use
full_vfp_access_check(s, ignore_vfp_enabled).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Add the infrastructure for building and invoking a decodetree decoder
for the AArch32 VFP encodings. At the moment the new decoder covers
nothing, so we always fall back to the existing hand-written decode.
We need to have one decoder for the unconditional insns and one for
the conditional insns, as otherwise the patterns for conditional
insns would incorrectly match against the unconditional ones too.
Since translate.c is over 14,000 lines long and we're going to be
touching pretty much every line of the VFP code as part of the
decodetree conversion, we create a new translate-vfp.inc.c to hold
the code which deals with VFP in the new scheme. It should be
possible to convert this into a standalone translation unit
eventually, but the conversion process will be much simpler if we
simply #include it midway through translate.c to start with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Typo comparing the sign of the field, twice, instead of also comparing
the mask of the field (which itself encodes both position and length).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190604154225.26992-1-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM pseudocode installs the error_code into the original
pointer, not the encrypted pointer. The difference applies
within the 7 bits of pac data; the result should be the sign
extension of bit 55.
Add a testcase to that effect.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 80376c3fc2 in 2010 we added a workaround for
some qbus buses not being connected to qdev devices -- if the
bus has no parent object then we register a reset function which
resets the bus on system reset (and unregister it when the
bus is unparented).
Nearly a decade later, we have now no buses in the tree which
are created with non-NULL parents, so we can remove the
workaround and instead just assert that if the bus has a NULL
parent then it is the main system bus.
(The absence of other parentless buses was confirmed by
code inspection of all the callsites of qbus_create() and
qbus_create_inplace() and cross-checked by 'make check'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190523150543.22676-1-peter.maydell@linaro.org
The SMMUv3 ID registers cover an area 0x30 bytes in size
(12 registers, 4 bytes each). We were incorrectly decoding
only the first 0x20 bytes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-id: 20190524124829.2589-1-peter.maydell@linaro.org
The NSACR register allows secure code to configure the FPU
to be inaccessible to non-secure code. If the NSACR.CP10
bit is set then:
* NS accesses to the FPU trap as UNDEF (ie to NS EL1 or EL2)
* CPACR.{CP10,CP11} behave as if RAZ/WI
* HCPTR.{TCP11,TCP10} behave as if RAO/WI
Note that we do not implement the NSACR.NSASEDIS bit which
gates only access to Advanced SIMD, in the same way that
we don't implement the equivalent CPACR.ASEDIS and HCPTR.TASE.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190510110357.18825-1-peter.maydell@linaro.org
This replaces 3 target-specific implementations for BIT, BIF, and BSL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20190518191934.21887-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 3d068aff (3.0) introduced NBD_MAX_BITMAP_EXTENTS as a limit on
how large we would allow a reply to NBD_CMD_BLOCK_STATUS to grow when
it is visiting a qemu:dirty-bitmap: context. Later, commit fb7afc79
(3.1) reused the constant to limit base:allocation context replies,
although the name is now less appropriate in that situation.
Rename things, and improve the macro to use units.h for better
legibility. Then reformat the comment to comply with checkpatch rules
added in the meantime. No semantic change.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190510151735.29687-1-eblake@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
common.nbd's nbd_server_set_tcp_port() tries to find a free port, and
then uses it for the whole test run. However, this is racy because even
if the port was free at the beginning, there is no guarantee it will
continue to be available. Therefore, 233 currently cannot reliably be
run concurrently with other NBD TCP tests.
This patch addresses the problem by dropping nbd_server_set_tcp_port(),
and instead finding a new port every time nbd_server_start_tcp_socket()
is invoked. For this, we run qemu-nbd with --fork and on error evaluate
the output to see whether it contains "Address already in use". If so,
we try the next port.
On success, we still want to continually redirect the output from
qemu-nbd to stderr. To achieve both, we redirect qemu-nbd's stderr to a
FIFO that we then open in bash. If the parent process exits with status
0 (which means that the server has started successfully), we launch a
background cat process that copies the FIFO to stderr. On failure, we
read the whole content into a variable and then evaluate it.
While at it, use --fork in nbd_server_start_unix_socket(), too. Doing
so allows us to drop nbd_server_wait_for_*_socket().
Note that the reason common.nbd did not use --fork before is that
qemu-nbd did not have --pid-file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-6-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
We kept old_stderr specifically so we could keep emitting error message
on stderr. However, qemu_daemon() closes stderr. Therefore, we need to
dup() stderr to old_stderr before invoking qemu_daemon().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-4-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu_nbd_pipe() currently unconditionally reads qemu-nbd's output. That
is not ideal because qemu-nbd may keep stderr open after the parent
process has exited.
Currently, the only user of qemu_nbd_pipe() is 147, which discards the
whole output if the parent process returned success and only evaluates
it on error. Therefore, we can replace qemu_nbd_pipe() by
qemu_nbd_early_pipe() that does the same: Discard the output on success,
and return it on error.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190508211820.17851-3-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
--fork is a bit boring if there is no way to get the child's PID. This
option helps.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190508211820.17851-2-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
In fullscreen mode, the window property of cocoaView may not be the key
window, and the current implementation would not re-grab cursor by left click
in fullscreen mode after ungrabbed in fullscreen mode with hot-key ctrl-opt-g.
This patch used value of isFullscreen as a short-cirtuit condition for
relative input device grabbing.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2D2F1191-E82F-4B54-A6E7-73FFB953DE93@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On Mojave, absolute input device, i.e. tablet, had trouble re-grabbing
the cursor in re-entry into the virtual screen area. In some cases,
the `window` property of NSEvent object was nil after cursor exiting from
window, hinting that the `-locationInWindow` method would return value in
screen coordinates. The current implementation used raw locations from
NSEvent without considering whether the value was for the window coordinates
or the macOS screen coordinates, nor the zooming factor for Zoom-to-Fit in
fullscreen mode.
In fullscreen mode, the fullscreen cocoa window might not be the key
window, therefore the location of event in virtual coordinates should
suffice.
This patches fixed boundary check methods for cursor in normal
and fullscreen with/without Zoom-to-Fit in Mojave.
Note: CGRect, -convertRectToScreen: and -convertRectFromScreen: were
used in coordinates conversion for compatibility reason.
Signed-off-by: Chen Zhang <tgfbeta@me.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: FA3FBC4F-5379-4118-B997-58FE05CC58F9@me.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- editor config tweak for shell scripts
- iotest updates (still not default for make check)
- various docker updates
- gcc/ubsan updates for travis
- some clean-ups for tests/vm (no serial autoinstall)
- semihosting fix for Coverity
- fixes for cputlb in 64-on-32 cases
- gdbstub re-factor + maintainership update
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl0BLmgACgkQ+9DbCVqe
KkRtRQf/RCD20OYfA++TxGuj68/SIJXc+mir6KViRzmPbGoJKTCbgt9GInLc2nwm
RvwLHWEoLQ/u8O9XWgj8KIwLeiDZS2or1BjAiV5sbfWFEzUTvfhZGPX55dGYw2ON
Yj7xL/fS+UFBR+YvGtJmqQb38FmY9n8JB/jpT6rbi+bigXbLLVxvmk01tbVw/IKH
ona1U+lYJFYGPp7xt6wbwwao3NgOo2PGM0L07lNy3k2sq1EFbtnWVJH9CjdiJ9bn
wEbk2S78Du+NVnqF7peOFPl7NRgzsgUv1+m6NPGmO/kbgMBHwczcG+QDO5t7EJ4n
7s5K8x6C3yQxav811L1+Lz3/4angkQ==
=cBKA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-gdbstub-cputlb-120619-3' into staging
Various fixes and updates:
- editor config tweak for shell scripts
- iotest updates (still not default for make check)
- various docker updates
- gcc/ubsan updates for travis
- some clean-ups for tests/vm (no serial autoinstall)
- semihosting fix for Coverity
- fixes for cputlb in 64-on-32 cases
- gdbstub re-factor + maintainership update
# gpg: Signature made Wed 12 Jun 2019 17:55:04 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-gdbstub-cputlb-120619-3: (40 commits)
gdbstub: Implement qemu physical memory mode
gdbstub: Clear unused variables in gdb_handle_packet
gdbstub: Implement target halted (? pkt) with new infra
gdbstub: Implement generic set/query (Q/q pkt) with new infra
gdbstub: Implement v commands with new infra
gdbstub: Implement step (s pkt) with new infra
gdbstub: Implement file io (F pkt) with new infra
gdbstub: Implement read all registers (g pkt) with new infra
gdbstub: Implement write all registers (G pkt) with new infra
gdbstub: Implement read memory (m pkt) with new infra
gdbstub: Implement write memory (M pkt) with new infra
gdbstub: Implement get register (p pkt) with new infra
gdbstub: Implement set register (P pkt) with new infra
gdbstub: Implement breakpoint commands (Z/z pkt) with new infra
gdbstub: Implement set_thread (H pkt) with new infra
gdbstub: Implement continue with signal (C pkt) with new infra
gdbstub: Implement continue (c pkt) with new infra
gdbstub: Implement thread_alive (T pkt) with new infra
gdbstub: Implement deatch (D pkt) with new infra
gdbstub: Add infrastructure to parse cmd packets
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new properties to allow setting the maximum display resolution.
Resolutions larger than that will not be included in the mode list.
In linux guests xrandr can be used to list modes.
Note: The existing xres and yres properties set the preferred display
resolution, i.e. the mode should be first in the mode list and guests
should use it by default.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190607083429.31943-1-kraxel@redhat.com
The loop is written with scalars, not vectors.
Use the correct type when incrementing.
Fixes: 5ee5c14cac
Reported-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a new query/set which changes the memory GDB sees to physical memory
only.
gdb> maint packet qqemu.PhyMemMode
will reply the current phy_mem_mode state (1 for enabled, 0 for disabled)
gdb> maint packet Qqemu.PhyMemMode:1
Will make GDB read/write only to physical memory, set to 0 to disable
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-21-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-20-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Note: The user-mode thread-id has been correctly reported since bd88c780e6
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-19-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The generic set/query packets contains implementation for varioius
sub-commands which are required for GDB and also additional commands
which are QEMU specific.
To see which QEMU specific commands are available use the command
gdb> maintenance packet qqemu.Supported
Currently the only implemented QEMU specific command is the command
that sets the single step behavior.
gdb> maintenance packet qqemu.sstepbits
Will display the MASK bits used to control the single stepping.
gdb> maintenance packet qqemu.sstep
Will display the current value of the mask used when single stepping.
gdb> maintenance packet Qqemu.sstep:HEX_VALUE
Will change the single step mask.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20190529064148.19856-18-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jon Doron <arilou@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20190529064148.19856-16-arilou@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>