This reverts commit 0cf8882fd0.
Which this commit, with aarch64 when using efi PCI devices with IO ports
do not work. The reason is that EFI creates I/O port mappings below
0x1000 (in fact, at 0). However Linux, for legacy reasons, does not
support I/O ports <= 0x1000 on PCI, so the I/O assignment created by EFI
is rejected.
EFI creates the mappings primarily for itself, and up until DSM #5
started to be enforced, all PCI resource allocations that existed at
boot were ignored by Linux and recreated from scratch.
Also, the commit in question looks dubious - it seems unlikely that
Linux would fail to create a resource tree. What does
happen is that BARs get moved around, which may cause trouble in some
cases: for instance, Linux had to add special code to the EFI framebuffer
driver to copy with framebuffer BARs being relocated.
DSM #5 has a long history of debate and misinterpretation.
Link: https://lore.kernel.org/r/20210724185234.GA2265457@roeck-us.net/
Fixes: 0cf8882fd0 ("acpi/gpex: Inform os to keep firmware resource map")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are going to commit ccee1a8140 ("acpi: Update _DSM method in expected files").
Allow changes to DSDT on ARM. Only configs with pci are
affected thus all virt variants but for microvm only the pcie variant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit [1] switched PCI hotplug from native to ACPI one by default.
That however breaks hotplug on following CLI that used to work:
-nodefaults -machine q35 \
-device pcie-root-port,id=pcie-root-port-0,multifunction=on,bus=pcie.0,addr=0x1,chassis=1 \
-device pcie-root-port,id=pcie-root-port-1,port=0x1,addr=0x1.0x1,bus=pcie.0,chassis=2
where PCI device is hotplugged to pcie-root-port-1 with error on guest side:
ACPI BIOS Error (bug): Could not resolve symbol [^S0B.PCNT], AE_NOT_FOUND (20201113/psargs-330)
ACPI Error: Aborting method \_SB.PCI0.PCNT due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: Aborting method \_GPE._E01 due to previous error (AE_NOT_FOUND) (20201113/psparse-531)
ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_E01] (20201113/evgpe-515)
cause is that QEMU's ACPI hotplug never supported functions other then 0
and due to bug it was generating notification entries for not described
functions.
Technically there is no reason not to describe cold-plugged bridges
(root ports) on functions other then 0, as they similarly to bridge
on function 0 are unpluggable.
So since we need to describe multifunction devices iterate over
fuctions as well. But describe only cold-plugged bridges[root ports]
on functions other than 0 as well.
1)
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reported-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210723090424.2092226-1-imammedo@redhat.com>
Fixes: 17858a1695 (hw/acpi/ich9: Set ACPI PCI hot-plug as default on Q35)<br>
Signed-off-by: Igor Mammedov <<a href="mailto:imammedo@redhat.com" target="_blank">imammedo@redhat.com</a>><br>
Reported-by: Laurent Vivier <<a href="mailto:lvivier@redhat.com" target="_blank">lvivier@redhat.com</a>><br>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35 has now ACPI hotplug enabled by default for PCI(e) devices.
As opposed to native PCIe hotplug, guests like Fedora 34
will not assign IO range to pcie-root-ports not supporting
native hotplug, resulting into a regression.
Reproduce by:
qemu-bin -M q35 -device pcie-root-port,id=p1 -monitor stdio
device_add e1000,bus=p1
In the Guest OS the respective pcie-root-port will have the IO range
disabled.
Fix it by setting the "reserve-io" hint capability of the
pcie-root-ports so the firmware will allocate the IO range instead.
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210802090057.1709775-1-marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* hw/arm/smmuv3: Check 31st bit to see if CD is valid
* qemu-options.hx: Fix formatting of -machine memory-backend option
* hw: aspeed_gpio: Fix memory size
* hw/arm/nseries: Display hexadecimal value with '0x' prefix
* Add sve-default-vector-length cpu property
* docs: Update path that mentions deprecated.rst
* hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
* hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
* hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
* target/arm: Report M-profile alignment faults correctly to the guest
* target/arm: Add missing 'return's after calling v7m_exception_taken()
* target/arm: Enforce that M-profile SP low 2 bits are always zero
-----BEGIN PGP SIGNATURE-----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=ru4w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210727' into staging
target-arm queue:
* hw/arm/smmuv3: Check 31st bit to see if CD is valid
* qemu-options.hx: Fix formatting of -machine memory-backend option
* hw: aspeed_gpio: Fix memory size
* hw/arm/nseries: Display hexadecimal value with '0x' prefix
* Add sve-default-vector-length cpu property
* docs: Update path that mentions deprecated.rst
* hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
* hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
* hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
* target/arm: Report M-profile alignment faults correctly to the guest
* target/arm: Add missing 'return's after calling v7m_exception_taken()
* target/arm: Enforce that M-profile SP low 2 bits are always zero
# gpg: Signature made Tue 27 Jul 2021 11:46:17 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210727:
hw: aspeed_gpio: Fix memory size
hw/arm/nseries: Display hexadecimal value with '0x' prefix
target/arm: Add sve-default-vector-length cpu property
target/arm: Export aarch64_sve_zcr_get_valid_len
target/arm: Correctly bound length in sve_zcr_get_valid_len
docs: Update path that mentions deprecated.rst
hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
target/arm: Report M-profile alignment faults correctly to the guest
target/arm: Add missing 'return's after calling v7m_exception_taken()
target/arm: Enforce that M-profile SP low 2 bits are always zero
qemu-options.hx: Fix formatting of -machine memory-backend option
hw/arm/smmuv3: Check 31st bit to see if CD is valid
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro used to calculate the maximum memory size of the MMIO region
had a mistake, causing all GPIO models to create a mapping of 0x9D8.
The intent was to have it be 0x9D8 - 0x800.
This extra size doesn't matter on ast2400 and ast2500, which have a 4KB
region set aside for the GPIO controller.
On the ast2600 the 3.3V and 1.8V GPIO controllers are 2KB apart, so the
regions would overlap. Worse was the 1.8V controller would map over the
top of the following peripheral, which happens to be the RTC.
The mmio region used by each device is a maximum of 2KB, so avoid the
calculations and hard code this as the maximum.
Fixes: 36d737ee82 ("hw/gpio: Add in AST2600 specific implementation")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20210713065854.134634-2-joel@jms.id.au
[PMM: fix autocorrect error in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210726150953.1218690-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the behavour of /proc/sys/abi/sve_default_vector_length
under the real linux kernel. We have no way of passing along
a real default across exec like the kernel can, but this is a
decent way of adjusting the startup vector length of a process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-4-richard.henderson@linaro.org
[PMM: tweaked docs formatting, document -1 special-case,
added fixup patch from RTH mentioning QEMU's maximum veclen.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from sve_zcr_get_valid_len and make accessible
from outside of helper.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, our only caller is sve_zcr_len_for_el, which has
already masked the length extracted from ZCR_ELx, so the
masking done here is a nop. But we will shortly have uses
from other locations, where the length will be unmasked.
Saturate the length to ARM_MAX_VQ instead of truncating to
the low 4 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed in commit f3478392 "docs: Move deprecation, build
and license info out of system/"
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723065828.1336760-1-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Arm v8.1M the VECTPENDING field in the ICSR has new behaviour: if
the register is accessed NonSecure and the highest priority pending
enabled exception (that would be returned in the VECTPENDING field)
targets Secure, then the VECTPENDING field must read 1 rather than
the exception number of the pending exception. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-7-peter.maydell@linaro.org
The VECTPENDING field in the ICSR is 9 bits wide, in bits [20:12] of
the register. We were incorrectly masking it to 8 bits, so it would
report the wrong value if the pending exception was greater than 256.
Fix the bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-6-peter.maydell@linaro.org
The ISCR.ISRPENDING bit is set when an external interrupt is pending.
This is true whether that external interrupt is enabled or not.
This means that we can't use 's->vectpending == 0' as a shortcut to
"ISRPENDING is zero", because s->vectpending indicates only the
highest priority pending enabled interrupt.
Remove the incorrect optimization so that if there is no pending
enabled interrupt we fall through to scanning through the whole
interrupt array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-5-peter.maydell@linaro.org
For M-profile, we weren't reporting alignment faults triggered by the
generic TCG code correctly to the guest. These get passed into
arm_v7m_cpu_do_interrupt() as an EXCP_DATA_ABORT with an A-profile
style exception.fsr value of 1. We didn't check for this, and so
they fell through into the default of "assume this is an MPU fault"
and were reported to the guest as a data access violation MPU fault.
Report these alignment faults as UsageFaults which set the UNALIGNED
bit in the UFSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-4-peter.maydell@linaro.org
In do_v7m_exception_exit(), we perform various checks as part of
performing the exception return. If one of these checks fails, the
architecture requires that we take an appropriate exception on the
existing stackframe. We implement this by calling
v7m_exception_taken() to set up to take the new exception, and then
immediately returning from do_v7m_exception_exit() without proceeding
any further with the unstack-and-exception-return process.
In a couple of checks that are new in v8.1M, we forgot the "return"
statement, with the effect that if bad code in the guest tripped over
these checks we would set up to take a UsageFault exception but then
blunder on trying to also unstack and return from the original
exception, with the probable result that the guest would crash.
Add the missing return statements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-3-peter.maydell@linaro.org
For M-profile, unlike A-profile, the low 2 bits of SP are defined to be
RES0H, which is to say that they must be hardwired to zero so that
guest attempts to write non-zero values to them are ignored.
Implement this behaviour by masking out the low bits:
* for writes to r13 by the gdbstub
* for writes to any of the various flavours of SP via MSR
* for writes to r13 via store_reg() in generated code
Note that all the direct uses of cpu_R[] in translate.c are in places
where the register is definitely not r13 (usually because that has
been checked for as an UNDEFINED or UNPREDICTABLE case and handled as
UNDEF).
All the other writes to regs[13] in C code are either:
* A-profile only code
* writes of values we can guarantee to be aligned, such as
- writes of previous-SP-value plus or minus a 4-aligned constant
- writes of the value in an SP limit register (which we already
enforce to be aligned)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-2-peter.maydell@linaro.org
The documentation of the -machine memory-backend has some minor
formatting errors:
* Misindentation of the initial line meant that the whole option
section is incorrectly indented in the HTML output compared to
the other -machine options
* The examples weren't indented, which meant that they were formatted
as plain run-on text including outputting the "::" as text.
* The a) b) list has no rst-format markup so it is rendered as
a single run-on paragraph
Fix the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210719105257.3599-1-peter.maydell@linaro.org
The bit to see if a CD is valid is the last bit of the first word of the CD.
Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Message-id: 1626728232-134665-2-git-send-email-joe.komlodi@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter's fix for a bunch of races
-> Seem to fix the occasional crash seen by Peter
Wei's fix for migration with free page hinting
-> Bug has been around for a while, but makes a huge difference
My fix for OpenBSD test corner case
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEERfXHG0oMt/uXep+pBRYzHrxb/ecFAmD+ragACgkQBRYzHrxb
/efqKxAAqaor4INEZTqlK+zxSpt+if3v/3WcyMlghmFO30soz0nGuiq5qBLkOMrN
LB+1gRxIa7bg8SgDVyGdPlOTa3SQjhM2CJFM789Y0V+8HfMIyFXlVNEZmRxegLtL
9M5muf1VO+gG8YPTskAKEjeHNWPspv4+wjpHnY/MxRt4TZ0sPq6Q7glzfPU94Ajm
P8e3Sx8zYhKV342M/wy6F8LSn6q5+amRV8NeO+1VtTnic/Uft2Q7Jp91kH8jbYKs
gPy6Ly3UGZHDxjBWcUj7lA57fKTYVuAPpZm5Q+ZJLW9iwo1Mik6cYBkdaX/Wf9yD
yQBNkDcYQoKmRJoiDEFjqmp6RbRnmD4pCXOQBzyjIu1fQXAXy3PmETAePfdk3mkR
ssmWRJoxCG1sR/rpU738oNZFYAe8FSTPiiBHVJor/iqMIHJaoRoNlfU9bV67ak7f
XEWU6GmP2yko34zlXCSpctuXJYkME6e74PKhS6Vh9RDIXc+6UBQwSKQMJg8oDezd
Dqu3nOT9XO6OyD2/XWM3K+DVqQU+SOhKTvN3Gpl9BfkhDDpcpnmnySjbmj5tU70Z
EaCqhTFuH6krbk2SnukhRyOt/uFkNhIsLahqMkdxfFMxTMZ5P0xWPC+EOvZFZjOP
l4IrrdIxBGmP5j6rGlzWRzfz5VsN560QvMo/C6b/HzquGanPWp8=
=jNI0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20210726a' into staging
Migration fixes 2021-07-26
Peter's fix for a bunch of races
-> Seem to fix the occasional crash seen by Peter
Wei's fix for migration with free page hinting
-> Bug has been around for a while, but makes a huge difference
My fix for OpenBSD test corner case
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Jul 2021 13:42:16 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-migration-20210726a:
migration: clear the memory region dirty bitmap when skipping free pages
migration: Move the yank unregister of channel_close out
migration: Teach QEMUFile to be QIOChannel-aware
migration: Introduce migration_ioc_[un]register_yank()
migration: Make from_dst_file accesses thread-safe
migration: Fix missing join() of rp_thread
tests/qtest/migration-test.c: use 127.0.0.1 instead of 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace bitrev8 with revbit8.
Fixes for set but not used warnings.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmD/LQEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9RnwgAq3wti4fF3FrSUCQ5
zsspEi2JIU1dybpxjM9PXqi9uXZiO4ITlCrhmB9o+7DA78/rx/EjoAqFNK5MyPf4
v1g12LvuuwxwOv6LMPiH5io+Aygbaz8Xk+AJsYr6eMMxh+4zLcyiYg03eBH65IkS
1HceGon67gYHjIqeb9OJ6R6VgvSwCsZ3J+uAR1f4/BzfwoM/+zxMFiWzwFTJxX1t
sc7VhX1dZwoVJoCUtL52+7a8kVMFud70aOuE0Uwlwt1nryf1HUHTS26ghF95e/6v
+QPZEobbfuyt+X97/qiRGYHzYLDrJX1SiBZ3vTIUNoDUDip2Nyt3SncYTXHuEoHy
SN6vFw==
=4/cY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210726' into staging
Fix icount accounting.
Replace bitrev8 with revbit8.
Fixes for set but not used warnings.
# gpg: Signature made Mon 26 Jul 2021 22:45:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20210726:
tests/unit: Remove unused variable from test_io
linux-user/syscall: Remove unused variable from execve
hw/pci-hist/pnv_phb4: Fix typo in pnv_phb4_ioda_write
hw/ppc/spapr_events: Remove unused variable from check_exception
hw/audio/adlib: Remove unused variable in adlib_callback
net/checksum: Remove unused variable in net_checksum_add_iov
util/selfmap: Discard mapping on error
accel/tcg: Remove unused variable in cpu_exec
nbd/server: Mark variable unused in nbd_negotiate_meta_queries
bitops.h: revert db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation")
accel/tcg: Remove unnecessary check on icount_extra in cpu_loop_exec_tb()
accel/tcg: Don't use CF_COUNT_MASK as the max value of icount_decr.u16.low
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a regression test for mmio read on big-endian hosts.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
The new PMR test unearthed a long-standing issue with MMIO reads on
big-endian hosts.
Fix this by unconditionally storing all controller registers in little
endian.
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Peter noticed that mmio access may read into the NvmeParams member in
the NvmeCtrl struct.
Fix the bounds check.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the NvmeBarRegs enum and use these instead of explicit register
offsets.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The specification uses a set of 32 bit PMRMSCL and PMRMSCU registers to
make up the 64 bit logical PMRMSC register.
Make it so.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch the nvme-ns devices are always children of the
NvmeBus owned by the NvmeCtrl. This causes the namespaces to be
unrealized when the parent device is removed. However, when subsystems
are involved, this is not what we want since the namespaces may be
attached to other controllers as well.
This patch adds an additional NvmeBus on the subsystem device. When
nvme-ns devices are realized, if the parent controller device is linked
to a subsystem, the parent bus is set to the subsystem one instead. This
makes sure that namespaces are kept alive and not unrealized.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This will test the PMR functionality.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: replaced memory-backend-file with memory-backend-ram]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If the number of PRP/SGL mappings exceed 1024, reads and writes will
fail because of an internal QEMU limitation of max 1024 vectors.
Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: changed the error message to be more generic]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure the controller is unregistered from the subsystem when device
is removed.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We currently lack the infrastructure to handle subsystem hotplugging, so
disable it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The nvme_ns_setup and nvme_ns_check_constraints should not depend on the
controller state. Refactor and remove it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
From clang-13:
tests/unit/test-iov.c:161:26: error: variable 't' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
linux-user/syscall.c:8503:17: error: variable 'total_size' set but not used \
[-Werror,-Wunused-but-set-variable]
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/pci-host/pnv_phb4.c:375:18: error: variable 'v' set but not used \
[-Werror,-Wunused-but-set-variable]
It's pretty clear that we meant to write back 'v' after
all that computation and not 'val'.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/ppc/spapr_events.c:937:14: error: variable 'xinfo' set but not used \
[-Werror,-Wunused-but-set-variable]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/audio/adlib.c:189:18: error: variable 'net' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
../qemu/net/checksum.c:189:23: error: variable 'buf_off' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
util/selfmap.c:26:21: error: variable 'errors' set but not used \
[-Werror,-Wunused-but-set-variable]
Quite right of course, but there's no reason not to check errors.
First, incrementing errors is incorrect, because qemu_strtoul
returns an errno not a count -- just or them together so that
we have a non-zero value at the end.
Second, if we have an error, do not add the struct to the list,
but free it instead.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
accel/tcg/cpu-exec.c:783:15: error: variable 'cc' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
nbd/server.c:976:22: error: variable 'bitmaps' set but not used \
[-Werror,-Wunused-but-set-variable]
which is incorrect; see //bugs.llvm.org/show_bug.cgi?id=3888.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation") introduced
a bitrev8() function to reverse the bit ordering required for storing the
MAC address in the q800 PROM.
This function is not required since QEMU implements its own revbit8()
function which does exactly the same thing. Remove the extraneous
bitrev8() function and switch its only caller in hw/m68k/q800.c to
use revbit8() instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210725110557.3007-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In cpu_loop_exec_tb(), we decide whether to look for a TB with
exactly insns_left instructions in it using the condition
(!cpu->icount_extra && insns_left > 0 && insns_left < tb->icount)
The check for icount_extra == 0 is unnecessary, because we just set
insns_left = MIN(0xffff, cpu->icount_budget);
icount_extra = icount_budget - insns_left;
and so icount_extra can only be non-zero if icount_budget > 0xffff
and insns_left == 0xffff. But in that case insns_left >= tb->icount
because 0xffff is much larger than TCG_MAX_INSNS, so the condition
will be false anyway.
Remove the unnecessary check, and instead assert:
* that we are only going to execute a partial TB here if the
icount budget has run out (ie icount_extra == 0)
* that the number of insns we're going to execute does fit into
the CF_COUNT_MASK
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210725174405.24568-3-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In cpu_loop_exec_tb() we were bounding the number of insns we might
try to execute in a TB using CF_COUNT_MASK. This is incorrect,
because we can validly put up to 0xffff into icount_decr.u16.low. In
particular, since commit 78ff82bb1b reduced CF_COUNT_MASK to
511 this meant that we would incorrectly only try to execute 511
instructions in a 512-instruction TB, which could result in QEMU
hanging when in icount mode.
Use the actual maximum value, which is 0xffff. (This brings this code
in to line with the similar logic in icount_prepare_for_run() in
tcg-accel-ops-icount.c.)
Fixes: 78ff82bb1b
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/499
Message-Id: <20210725174405.24568-2-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
the signal handler was not called.
Patch 1/2 fixes the Hexagon target
Patch 2/2 drops include qemu.h from target/hexagon/op_helper.c
**** Changes in v2 ****
Drop changes to linux-test.c due to intermittent failures on riscv
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJg/doaAAoJEHsCRPsS3kQi/gIH+gJ6GBmIb7NNDt+tRYjsnOpZ
QgmkM/cvOBhqo+dUkxWIDXA7i7ZzytBHHG5GoplVkZjm/S+e5aEsuEyqwL6KbcK7
kB6NvnHA3n9npf5MGcUduHlvPPzDsO7Z4SLrfwkIliiWL/AJ4FzKqEGoviWv2YnN
k+29YDSv11B1jgXriADBJVnWtCf2CGPsF7BiKMcguZ6Bj+q+fH1cPpe2EWN8R8n2
D+La/M5qWEC2FcWPCkrCs61Pi/cV+L4M0IA6JAEm8K+MtoDWmsCNWaVsakiNWWg+
FRiHg45z3cCBvQ+SLQQ4SvsaQriI3M/yIKD6ABNgAfurIiTj4YbHAbeTmfEFYOs=
=YdBn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210725' into staging
The Hexagon target was silently failing the SIGSEGV test because
the signal handler was not called.
Patch 1/2 fixes the Hexagon target
Patch 2/2 drops include qemu.h from target/hexagon/op_helper.c
**** Changes in v2 ****
Drop changes to linux-test.c due to intermittent failures on riscv
# gpg: Signature made Sun 25 Jul 2021 22:39:38 BST
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* remotes/quic/tags/pull-hex-20210725:
target/hexagon: Drop include of qemu.h
Hexagon (target/hexagon) remove put_user_*/get_user_*
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>