Commit graph

103 commits

Author SHA1 Message Date
Aurelien Jarno 7aab08aa78 tcg/arm: fix cross-endian qemu_st16
The bswap16 TCG opcode assumes that the high bytes of the temp equal
to 0 before calling it. The ARM backend implementation takes this
assumption to slightly optimize the generated code.

The same implementation is called for implementing the cross-endian
qemu_st16 opcode, where this assumption is not true anymore. One way to
fix that would be to zero the high bytes before calling it. Given the
store instruction just ignore them, it is possible to provide a slightly
more optimized version. With ARMv6+ the rev16 instruction does the work
correctly. For lower ARM versions the patch provides a version which
behaves correctly with non-zero high bytes, but fill them with junk.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24 13:19:53 +01:00
Aurelien Jarno d17bd1d8cc tcg/arm: fix TLB access in qemu-ld/st ops
The TCG arm backend considers likely that the offset to the TLB
entries does not exceed 12 bits for mem_index = 0. In practice this is
not true for at least the MIPS target.

The current patch fixes that by loading the bits 23-12 with a separate
instruction, and using loads with address writeback, independently of
the value of mem_idx. In total this allow a 24-bit offset, which is a
lot more than needed.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24 13:19:53 +01:00
Aurelien Jarno 41a05a4576 Merge branch 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu
* 'linux-user-for-upstream' of git://git.linaro.org/people/rikuvoipio/qemu:
  linux-user: register align p{read, write}64
  linux-user: ppc: mark as long long aligned
  tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
  configure: Remove unnecessary host_guest_base code
  linux-user: If loading fails, print error as string, not number
  linux-user: Fix siginfo handling
  alpha-linux-user: Fix sigaltstack structure definition
  linux-user: Implement gethostname
  linux-user: Perform more checks on iovec lists
  linux-user: fix multi-threaded /proc/self/maps
  linux-user: fix statfs
2012-10-19 20:28:22 +02:00
Peter Maydell 4a1d241e3c tcg/arm: Implement movcond_i32
Implement movcond_i32 for ARM, as the sequence
  mov dst, v2   (implicitly done by the tcg common code)
  cmp c1, c2
  movCC dst, v1

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17 01:22:49 +02:00
Peter Maydell 7fc645bf7a tcg/arm: Factor out code to emit immediate or reg-reg op
The code to emit either an immediate cmp or a register cmp insn is
duplicated in several places; factor it out into its own function.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17 01:22:48 +02:00
Peter Maydell 07e10e5de1 tcg: Remove TCG_TARGET_HAS_GUEST_BASE define
GUEST_BASE support is now supported by all TCG backends, and is
now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE
define (set by every backend) and the error if it is unset.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-10-12 14:27:05 +03:00
Aurelien Jarno 048d3612a5 Merge branch 'trivial-patches' of git://github.com/stefanha/qemu
* 'trivial-patches' of git://github.com/stefanha/qemu:
  versatilepb: Use symbolic indices for ARM PIC
  qdev: kill bogus comment
  qemu-barrier: Fix compiler version check for future gcc versions
  hw: Add missing 'static' attribute for QEMUMachine
  cleanup useless return sentence
  qemu-sockets: Fix compiler warning (regression for MinGW)
  vnc: Fix spelling (hellmen -> hellman) in comment
  slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
  tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
  cpu: Add missing 'static' attribute to qemu_global_mutex
  configure: Support empty target list (--target-list=)
  hw: Fix return value check for bdrv_read, bdrv_write
2012-10-06 18:54:14 +02:00
Richard Henderson 0aed257f08 tcg: Add TCG_COND_NEVER, TCG_COND_ALWAYS
There are several cases that can be handled easier inside both
translators and code generators if we have out-of-band values
for conditions.  It's easy enough to handle ALWAYS and NEVER in
the natural way inside the tcg middle-end.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-06 18:48:40 +02:00
Aurelien Jarno 626cd050e2 tcg: remove obsolete jmp op
The TCG jmp operation doesn't really make sense in the QEMU context, it
is unused, it is not implemented by some targets, and it is wrongly
implemented by some others.

This patch simply removes it.

Reviewed-by: Richard Henderson <rth@twiddle.net>
Acked-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Stefan Weil<sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-06 18:47:04 +02:00
Peter Maydell f97713ff19 tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
Use the recently introduced tcg_out_mov_reg() function rather than
the equivalent inline code.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
2012-10-05 14:12:36 +02:00
Stefan Weil 6e17d0c5cd tcg: Remove tcg_target_get_call_iarg_regs_count
The TCG targets no longer need individual implementations.

Since commit 6a18ae2d29,
'flags' is no longer used in tcg_target_get_call_iarg_regs_count.

The remaining tcg_target_get_call_iarg_regs_count is trivial and only
called once. Therefore the patch eliminates it completely.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-22 16:52:37 +02:00
Richard Henderson ffc5ea09af tcg: Introduce movcond
Implemented with setcond if the target does not provide
the optional opcode.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21 19:53:16 +02:00
Blue Swirl 89c33337fd Remove unused CONFIG_TCG_PASS_AREG0 and dead code
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets,
remove dead code and support for !CONFIG_TCG_PASS_AREG0 case.

Remove dyngen-exec.h and all references to it. Although included by
hw/spapr_hcall.c, it does not seem to use it.

Remove unused HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-09-15 17:51:14 +00:00
Peter Maydell 9716ef3b1b tcg/arm: Fix broken CONFIG_TCG_PASS_AREG0 code
The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was
broken in that it did not respect the ABI requirement that 64
bit values were passed in even-odd register pairs. The simplest
way to fix this is to implement some new utility functions
for marshalling function arguments into the correct registers
and stack, so that the code which sets up the address and
data arguments does not need to care whether there has been
a preceding env argument.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-26 18:14:46 +00:00
Blue Swirl e141ab52d2 softmmu templates: optionally pass CPUState to memory access functions
Optionally, make memory access helpers take a parameter for CPUState
instead of relying on global env.

On most targets, perform simple moves to reorder registers. On i386,
switch from regparm(3) calling convention to standard stack-based
version.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-18 12:21:52 +00:00
Andreas Färber 9349b4f9fd Rename CPUState -> CPUArchState
Scripted conversion:
  for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do
    sed -i "s/CPUState/CPUArchState/g" $file
  done

All occurrences of CPUArchState are expected to be replaced by QOM CPUState,
once all targets are QOM'ified and common fields have been extracted.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14 22:20:27 +01:00
Stefan Weil dba4f1bcc3 w64: Change data type of parameters for flush_icache_range
The TCG targets i386 and tci needed a change of the function
prototype for w64.

This change is currently not needed for the other TCG targets,
but it can be applied to avoid code differences.

Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-03 18:10:21 +00:00
Aurelien Jarno 5c84bd904b tcg-arm: fix a typo in comments
ARM still doesn't support 16GB buffers in 32-bit modes, replace the
16GB by 16MB in the comment.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-13 10:36:59 +00:00
Peter Maydell 05b922dd0a tcg/arm: Use r6 as TCG_AREG0 to avoid clash with Thumb framepointer
On ARM, in Thumb mode r7 is used for the framepointer; this meant
that we would fail to compile in debug mode because we were using r7
for TCG_AREG0. Shift to r6 instead to avoid this clash.
(Bug reported as LP:870990.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2012-01-10 17:52:49 +01:00
Dr. David Alan Gilbert 222f23f508 tcg/arm: remove fixed map code buffer restriction
On ARM, don't map the code buffer at a fixed location, and fix up the
call/goto tcg routines to let it do long jumps.

Mapping the code buffer at a fixed address could sometimes result in it being
mapped over the top of the heap with pretty random results.

Signed-off-by: Dr. David Alan Gilbert <david.gilbert@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-12-14 21:58:18 +01:00
Richard Henderson 2a534aff30 tcg: Use TCGReg for standard tcg-target entry points.
Including tcg_out_ld, tcg_out_st, tcg_out_mov, tcg_out_movi.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14 17:47:27 +01:00
Richard Henderson 771142c2a7 tcg: Standardize on TCGReg as the enum for hard registers
Most targets did not name the enum; tci used TCGRegister.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14 17:47:26 +01:00
Peter Maydell df0eda9b73 tcg/arm: Remove unused tcg_out_addi()
Remove the unused function tcg_out_addi() from the ARM TCG backend;
this fixes a compilation failure on ARM hosts with newer gcc.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01 06:15:54 +00:00
Stefan Weil 840f58617b tcg: Don't declare TCG_TARGET_REG_BITS in tcg-target.h
It is now declared for all tcg targets in tcg.h,
so the tcg target specific declarations are redundant.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01 06:11:12 +00:00
Richard Henderson 25c4d9cc84 tcg: Always define all of the TCGOpcode enum members.
By always defining these symbols, we can eliminate a lot of ifdefs.

To allow this to be checked reliably, the semantics of the
TCG_TARGET_HAS_* macros must be changed from def/undef to true/false.
This allows even more ifdefs to be removed, converting them into
C if statements.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-08-21 18:52:24 +00:00
Blue Swirl 614f104dfd Delegate setup of TCG temporaries to targets
Delegate TCG temp_buf setup to targets, so that they can use a stack
frame later instead.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:43 +00:00
Blue Swirl cea5f9a28f cpu-exec.c: avoid AREG0 use
Make functions take a parameter for CPUState instead of relying
on global env. Pass CPUState pointer to TCG prologue, which moves
it to AREG0.

Thanks to Peter Maydell and Laurent Desnogues for the ARM prologue
change.

Revert the hacks to avoid AREG0 use on Sparc hosts.

Move cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h.

Compile the file without HELPER_CFLAGS.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26 18:25:38 +00:00
Peter Maydell 24e838b787 tcg/arm: Support host code being compiled for Thumb
Although the TCG generated code is always in ARM mode, it is possible
that the host code was compiled by gcc in Thumb mode (this is often the
default for Linux distributions targeting ARM v7 only). Handle this
by using BLX imm when doing a call from ARM into Thumb mode.
Since BLX imm is not a conditionalisable instruction, we make
tcg_out_call() no longer take a condition code; we were only ever
using it with COND_AL anyway.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-03-24 03:27:22 +01:00
Aurelien Jarno 5677903453 tcg arm/mips/ia64: add a comment about retranslation and caches
Add a comment about cache coherency and retranslation, so that people
developping new targets based on existing ones are warned of the issue.

Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-12 00:06:07 +01:00
Aurelien Jarno 0f11f25a00 tcg/arm: improve constant loading
Improve constant loading in two ways:
- On all ARM versions, it's possible to load 0xffffff00 = -0x100 using
  the mvn rd, #0. Fix the conditions.
- On <= ARMv6 versions, where movw and movt are not available, load the
  constants using mov and orr with rotations depending on the constant
  to load. This is very useful for example to load constants where the
  low byte is 0. This reduce the generated code size by about 7%.

Also fix the coding style at the same time.

Cc: Andrzej Zaborowski <balrog@zabor.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-10 07:30:30 +01:00
Aurelien Jarno 9a3abc21a6 tcg/arm: fix qemu_st64 for big endian targets
Due to a typo, qemu_st64 doesn't properly byteswap the 32-bit low word of
a 64 bit word before saving it. This patch fixes that.

Acked-by: Andrzej Zaborowski <balrogg@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-08 16:41:33 +01:00
Aurelien Jarno c69806ab82 tcg/arm: fix branch target change during code retranslation
QEMU uses code retranslation to restore the CPU state when an exception
happens. For it to work the retranslation must not modify the generated
code. This is what is currently implemented in ARM TCG.

However on CPU that don't have icache/dcache/memory synchronised like
ARM, this requirement is stronger and code retranslation must not modify
the generated code "atomically", as the cache line might be flushed
at any moment (interrupt, exception, task switching), even if not
triggered by QEMU. The probability for this to happen is very low, and
depends on cache size and associativiy, machine load, interrupts, so the
symptoms are might happen randomly.

This requirement is currently not followed in tcg/arm, for the
load/store code, which basically has the following structure:
  1) tlb access code is written
  2) conditional fast path code is written
  3) branch is written with a temporary target
  4) slow path code is written
  5) branch target is updated
The cache lines corresponding to the retranslated code is not flushed
after code retranslation as the generated code is supposed to be the
same. However if the cache line corresponding to the branch instruction
is flushed between step 3 and 5, and is not flushed again before the
code is executed again, the branch target is wrong. In the guest, the
symptoms are MMU page fault at a random addresses, which leads to
kernel page fault or segmentation faults.

The patch fixes this issue by avoiding writing the branch target until
it is known, that is by writing only the branch instruction first, and
later only the offset.

This fixes booting linux guests on ARM hosts (tested: arm, i386, mips,
mipsel, sh4, sparc).

Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-08 16:39:47 +01:00
Richard Henderson e4d58b41f9 tcg: Make some tcg-target.c routines static.
Both tcg_target_init and tcg_target_qemu_prologue
are unused outside of tcg.c.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 11:18:26 +02:00
Richard Henderson 3b6dac3416 tcg: Add TYPE parameter to tcg_out_mov.
Mirror tcg_out_movi in having a TYPE parameter.  This allows x86_64
to perform the move at the proper width, which may elide a REX prefix.

Introduce a TCG_TYPE_REG enumerator to represent the "native width"
of the host register, and to distinguish the usage from "pointer data"
as represented by the existing TCG_TYPE_PTR.

Update all targets to match.

Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09 11:18:25 +02:00
Aurelien Jarno e23886a91d tcg/arm: fix condition in zero/sign extension functions
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-25 05:46:22 +02:00
Aurelien Jarno c66b5c2cb6 tcg/arm: don't try to load constants using pc
There is statistically almost 0 chances to use this code, so
remove it.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno 914ccf51b0 tcg/arm: optimize register allocation order
The beginning of the register allocation order list on the TCG arm
target matches the list of clobbered registers. This means that when an
helper is called, there is almost always clobbered registers that have
to be spilled.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno bf5675efe3 tcg/arm: fix argument alignment in qemu_st64
64-bit arguments should be aligned on an even register as specified
by the "Procedure Call Standard for the ARM Architecture".

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno 2633a2d015 tcg/arm: remove useless register tests in qemu_ld/st
addr_reg, data_reg and data_reg2 can't be register r0 or r1 du to the
constraints. Don't check if they equals these registers.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno 67dcab7327 tcg/arm: bswap arguments in qemu_ld/st if needed
On big endian targets, data arguments of qemu_ld/st ops have to be
byte swapped. Two temporary registers are needed for qemu_st to do
the bswap. r0 and r1 are used in system mode, do the same in user
mode, which implies reworking the constraints.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno e854b6d39c tcg/arm: use ext* ops in qemu_ld
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno 7e0d95628d tcg/arm: remove conditional argument for qemu_ld/st
While it make sense to pass a conditional argument to tcg_out_*()
functions as the ARM architecture allows that, it doesn't make sense
for qemu_ld/st functions. These functions use comparison instructions
and conditional execution already, so it is not possible to use a
second level of conditional execution.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:06 +02:00
Aurelien Jarno 244b1e81f6 tcg/arm: add bswap ops
Add an bswap16 and bswap32 ops, either using the rev and rev16
instructions on ARMv6+ or shifts and logical operations on previous
ARM versions. In both cases the result use less instructions than
the pure TCG version.

These ops are also needed by the qemu_ld/st functions.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:02 +02:00
Aurelien Jarno 9517094f72 tcg/arm: add ext16u op
Add an ext16u op, either using the uxth instruction on ARMv6+ or two
shifts on previous ARM versions. In both cases the result use the same
number or less instructions than the pure TCG version.

Also move all sign extension code to separate functions, so that they
can be reused in other parts of the code.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:02 +02:00
Aurelien Jarno 293579e55c tcg/arm: add rotation ops
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:02 +02:00
Aurelien Jarno 23401b58a4 tcg/arm: use the blx instruction when possible
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:02 +02:00
Aurelien Jarno 8f7f749f21 tcg/arm: sxtb and sxth are available starting with ARMv6
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:03:02 +02:00
Aurelien Jarno ac34fb5c5d tcg/arm: add variables to define the allowed instructions set
Use a set of variables to define the allowed ARM instructions, depending
on the __ARM_ARCH_*__ GCC defines.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:02:53 +02:00
Aurelien Jarno 2488b41bb2 tcg/arm: align 64-bit arguments in function calls
As specified by the "Procedure Call Standard for the ARM Architecture".

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:02:53 +02:00
Aurelien Jarno c8d80cef55 tcg/arm: replace integer values by registers enum
The TCG ARM backends uses integer values to refer to both immediate
values and register number. This makes the code difficult to read.

The patch below replaces all (if I haven't miss any ;-) integer values
representing register number by TCG_REG_* enum values.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-19 07:02:53 +02:00