Implement the MVE saturating doubling multiply accumulate insns
VQDMLAH, VQRDMLAH, VQDMLASH and VQRDMLASH. These perform a multiply,
double, add the accumulator shifted by the element size, possibly
round, saturate to twice the element size, then take the high half of
the result. The *MLAH insns do vector * scalar + vector, and the
*MLASH insns do vector * vector + scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLA insn, which multiplies a vector by a scalar
and accumulates into another vector.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLADAV and VMLSLDAV insns. Like the VMLALDAV and
VMLSLDAV insns already implemented, these accumulate multiplied
vector elements; but they accumulate a 32-bit result rather than a
64-bit one.
Note that these encodings overlap with what would be RdaHi=0b111 for
VMLALDAV, VMLSLDAV, VRMLALDAVH and VRMLSLDAVH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The MVEGenDualAccOpFn is a bit misnamed, since it is used for
the "long dual accumulate" operations that use a 64-bit
accumulator. Rename it to MVEGenLongDualAccOpFn so we can
use the former name for the 32-bit accumulator insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE narrowing move insns VMOVN, VQMOVN and VQMOVUN.
These take a double-width input, narrow it (possibly saturating) and
store the result to either the top or bottom half of the output
element.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VABAV insn, which computes absolute differences
between elements of two vectors and accumulates the result into
a general purpose register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer min/max across vector insns
VMAXV, VMINV, VMAXAV and VMINAV, which find the maximum
from the vector elements and a general purpose register,
and store the maximum back into the general purpose
register.
These insns overlap with VRMLALDAVH (they use what would
be RdaHi=0b110).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
All the users of the vmlaldav formats have an 'x bit in bit 12 and an
'a' bit in bit 5; move these to the format rather than specifying them
in each insn pattern.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE instructions which perform shifts by a scalar.
These are VSHL T2, VRSHL T2, VQSHL T1 and VQRSHL T2. They take the
shift amount in a general purpose register and shift every element in
the vector by that amount.
Mostly we can reuse the helper functions for shift-by-immediate; we
do need two new helpers for VQRSHL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMLAS insn, which multiplies a vector by a vector
and adds a scalar.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VPSEL insn, which sets each byte of the destination
vector Qd to the byte from either Qn or Qm depending on the value of
the corresponding bit in VPR.P0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions that compare
each element against a scalar from a general purpose register. These
are "VCMP (vector)" encodings T4, T5 and T6 and "VPT (vector)"
encodings T4, T5 and T6.
We have to move the decodetree pattern for VPST, because it
overlaps with VCMP T4 with size = 0b11.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE integer vector comparison instructions. These are
"VCMP (vector)" encodings T1, T2 and T3, and "VPT (vector)" encodings
T1, T2 and T3.
These insns compare corresponding elements in each vector, and update
the VPR.P0 predicate bits with the results of the comparison. VPT
also sets the VPR.MASK01 and VPR.MASK23 fields -- it is effectively
"VCMP then VPST".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Factor out the "generate code to update VPR.MASK01/MASK23" part of
trans_VPST(); we are going to want to reuse it for the VPT insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE incrementing/decrementing dup insns VIDUP, VDDUP,
VIWDUP and VDWDUP. These fill the elements of a vector with
successively incrementing values, starting at the offset specified in
a general purpose register. The final value of the offset is written
back to this register. The wrapping variants take a second general
purpose register which specifies the point where the count should
wrap back to 0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement the MVE VMULL (polynomial) insn. Unlike Neon, this comes
in two flavours: 8x8->16 and a 16x16->32. Also unlike Neon, the
inputs are in either the low or the high half of each double-width
element.
The assembler for this insn indicates the size with "P8" or "P16",
encoded into bit 28 as size = 0 or 1. We choose to follow the
same encoding as VQDMULL and decode this into a->size as MO_16
or MO_32 indicating the size of the result elements. This then
carries through to the helper function names where it then
matches up with the existing pmull_h() which does an 8x8->16
operation and a new pmull_w() which does the 16x16->32.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
For vector loads, predicated elements are zeroed, instead of
retaining their previous values (as happens for most data
processing operations). This means we need to distinguish
"beat not executed due to ECI" (don't touch destination
element) from "beat executed but predicated out" (zero
destination element).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We were not paying attention to the ECI state when advancing the VPT
state. Architecturally, VPT state advance happens for every beat
(see the pseudocode VPTAdvance()), so on every beat the 4 bits of
VPR.P0 corresponding to the current beat are inverted if required,
and at the end of beats 1 and 3 the VPR MASK fields are updated.
This means that if the ECI state says we should not be executing all
4 beats then we need to skip some of the updating of the VPR that we
currently do in mve_advance_vpt().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In some situations we need a mask telling us which parts of the
vector correspond to beats that are not being executed because of
ECI, separately from the combined "which bytes are predicated away"
mask. Factor this mask calculation out of mve_element_mask() into
its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In mve_element_mask(), we calculate a mask for tail predication which
should have a number of 1 bits based on the value of LR. However,
our MAKE_64BIT_MASK() macro has undefined behaviour when passed a
zero length. Special case this to give the all-zeroes mask we
require.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We got an edge case wrong in the 48-bit SQRSHRL implementation: if
the shift is to the right, although it always makes the result
smaller than the input value it might not be within the 48-bit range
the result is supposed to be if the input had some bits in [63..48]
set and the shift didn't bring all of those within the [47..0] range.
Handle this similarly to the way we already do for this case in
do_uqrshl48_d(): extend the calculated result from 48 bits,
and return that if not saturating or if it doesn't change the
result; otherwise fall through to return a saturated value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In do_sqrshl48_d() and do_uqrshl48_d() we got some of the edge
cases wrong and failed to saturate correctly:
(1) In do_sqrshl48_d() we used the same code that do_shrshl_bhs()
does to obtain the saturated most-negative and most-positive 48-bit
signed values for the large-shift-left case. This gives (1 << 47)
for saturate-to-most-negative, but we weren't sign-extending this
value to the 64-bit output as the pseudocode requires.
(2) For left shifts by less than 48, we copied the "8/16 bit" code
from do_sqrshl_bhs() and do_uqrshl_bhs(). This doesn't do the right
thing because it assumes the C type we're working with is at least
twice the number of bits we're saturating to (so that a shift left by
bits-1 can't shift anything off the top of the value). This isn't
true for bits == 48, so we would incorrectly return 0 rather than the
most-positive value for situations like "shift (1 << 44) right by
20". Instead check for saturation by doing the shift and signextend
and then testing whether shifting back left again gives the original
value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In the MVE helpers for the narrowing operations (DO_VSHRN and
DO_VSHRN_SAT) we were using the wrong bits of the predicate mask for
the 'top' versions of the insn. This is because the loop works over
the double-sized input elements and shifts the predicate mask by that
many bits each time, but when we write out the half-sized output we
must look at the mask bits for whichever half of the element we are
writing to.
Correct this by shifting the whole mask right by ESIZE bits for the
'top' insns. This allows us also to simplify the saturation bit
checking (where we had noticed that we needed to look at a different
mask bit for the 'top' insn.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
A cut-and-paste error meant we handled signed VADDV like
unsigned VADDV; fix the type used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
In the MVE shift-and-insert insns, we special case VSLI by 0
and VSRI by <dt>. VSRI by <dt> means "don't update the destination",
which is what we've implemented. However VSLI by 0 is "set
destination to the input", so we don't want to use the same
special-casing that we do for VSRI by <dt>.
Since the generic logic gives the right answer for a shift
by 0, just use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Include the MVE VPR register value in the CPU dumps produced by
arm_cpu_dump_state() if we are printing FPU information. This
makes it easier to interpret debug logs when predication is
active.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Although the architecture doesn't define it as an alias, VMOVL
(vector move long) is encoded as a VSHLL with a zero shift.
Add a comment in the decode file noting that we handle VMOVL
as part of VSHLL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
When adding RAM_NORESERVE, we forgot to remove the old assertion when
adding the updated one, most probably when reworking the patches or
rebasing. We can easily crash QEMU by adding
-object memory-backend-ram,id=mem0,size=500G,reserve=off
to the QEMU cmdline:
qemu-system-x86_64: ../softmmu/physmem.c:2146: qemu_ram_alloc_internal:
Assertion `(ram_flags & ~(RAM_SHARED | RAM_RESIZEABLE | RAM_PREALLOC))
== 0' failed.
Fix it by removing the old assertion.
Fixes: 8dbe22c686 ("memory: Introduce RAM_NORESERVE and wire it up in qemu_ram_mmap()")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-id: 20210805092350.31195-1-david@redhat.com
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 1e63fe6858 ("machine: pass QAPI struct to mc->smp_parse")
introduced documentation stating that a zero input value for an SMP
parameter indicates that its value should be automatically configured.
This is indeed how things work today, but we'd like to change that.
Avoid documenting behaviors we want to leave undefined for the time
being, giving us freedom to change it later.
Fixes: 1e63fe6858 ("machine: pass QAPI struct to mc->smp_parse")
Signed-off-by: Andrew Jones <drjones@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJhFeDkAAoJEHsCRPsS3kQiCTsH/RvpPwHd+Nkm+nnueTUbOWfJ
Jra+JUzuu7bNYwrFJcQUoetbplUXqDgHnY5VBaAltrgInaZ1Xt/QtWWNBdDc2MU6
WEs5JWAZn4/3mWaglZZ8ESDx/OjCKunfYYR6fZSlXG4WgVER6O8+A+ri0h3TWoRw
i/WzlvAROB3bUDvum+tqskT3zkH73NgHCcJhVAG/FiV232aDR9TJMN+OlgZ8n32Y
tnfSeATTZos6ms9em1kI4ccM8KWemehnxCY+GvohMdcnxF3kvsxyWgbUfcY3JuKz
4OVnXyGZhDD5ow1ORQcqlvF1MiIst1EbKtImNifalG39lMRCTpwupWIzggo7AuA=
=SZsl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210812' into staging
Hexagon (disas/hexagon.c) fix memory leak for early exit
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
# gpg: Signature made Fri 13 Aug 2021 04:03:00 BST
# gpg: using RSA key 7B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* remotes/quic/tags/pull-hex-20210812:
Hexagon (disas/hexagon.c) fix memory leak for early exit cases
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
machine_set_smp() mistakenly checks 'errp' not '*errp',
and so thinks there is an error every single time it runs.
This causes it to jump to the end of the method, skipping
the max CPUs checks. The caller meanwhile sees no error
and so carries on execution. The result of all this is:
$ qemu-system-x86_64 -smp -1
qemu-system-x86_64: GLib: ../glib/gmem.c:142: failed to allocate 481036337048 bytes
instead of
$ qemu-system-x86_64 -smp -1
qemu-system-x86_64: Invalid SMP CPUs -1. The max CPUs supported by machine 'pc-i440fx-6.1' is 255
This is a regression from
commit fe68090e8f
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu May 13 09:03:48 2021 -0400
machine: add smp compound property
Closes: https://gitlab.com/qemu-project/qemu/-/issues/524
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210812175353.4128471-1-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If dies is not supported by this machine's CPU topology, don't
keep processing options and return directly.
Fixes: 0aebebb561 ("machine: reject -smp dies!=1 for non-PC machines")
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210813112608.1452541-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
~0UL has 64 bits on Linux and 32 bits on Windows.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/512
Reported-by: Volker Rümelin <vr_qemu@t-online.de>
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210812111056.26926-1-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't allocate the string until error conditions have been checked
Fixes: a00cfed0e ("Hexagon (disas) disassembler")
Eliminate Coverity CID 1460121 (Resource leak)
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daud? <f4bug@amsat.org>
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
These machines had been removed in the QEMU v2.6 up to 4.0 time frame.
Message-Id: <20210811084103.74832-7-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These devices had been removed/replaced in QEMU v2.12 and v4.0.
Message-Id: <20210811084103.74832-6-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These HMP commands had been removed/replaced in QEMU v2.12. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-5-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v3.1. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-4-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v3.0. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-3-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These CLI options had been removed/replaced in QEMU v2.12. Still, some
people might want to update from older versions to the recent QEMU version,
so we should give some recommendations for the replacements in our
documentation.
Message-Id: <20210811084103.74832-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On oss-fuzz, we build twice, to put together a build that is portable to
the runner containers. On gitlab ci, this is wasteful and contributes to
timeouts on the build-oss-fuzz job. Avoid building twice on gitlab, at
the remote cost of potentially missing some cases that break oss-fuzz
builds.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20210809111621.54454-1-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The vhost-user-blk-test currently hangs if QTEST_QEMU_STORAGE_DAEMON_BINARY
points to a non-existing binary. Let's improve this situation by checking
for the availability of the binary first, so we can fail gracefully if
it is not accessible.
Message-Id: <20210811095949.133462-1-thuth@redhat.com>
Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
vhost-user-blk-test needs the qemu-storage-daemon, otherwise it
currently hangs. So make sure that we build the daemon before running
the tests.
Message-Id: <20210811094705.131314-1-thuth@redhat.com>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The windows cross builds still take way too long in gitlab CI, so need
more targets to be skipped. We don't want to hurt coverage of other
cross builds more though, so we let jobs fine tune with a new env
variale $CROSS_SKIP_TARGETS.
We take the set of targets that are considered relatively niche or
very old architectures, and skip approx half of them in win32 builds
and the other half of them in win64.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20210810140653.3969823-3-berrange@redhat.com>
[thuth: Swapped the "CROSS_SKIP_TARGETS:" lines as suggested by philmd]
Signed-off-by: Thomas Huth <thuth@redhat.com>