According to AArch64.TagCheckFault, none of the other ISS values are
provided, so we do not need to go so far as merge_syn_data_abort.
But we were missing the WnR bit.
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need more information than just the mmu_idx in order
to create the proper exception syndrome. Only change the
function signature so far.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200813200816.3037186-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit ce4afed839 ("target/arm: Implement AArch32 HCR and HCR2")
the HCR_EL2 register has been changed from type NO_RAW (no underlying
state and does not support raw access for state saving/loading) to
type CONST (TCG can assume the value to be constant), removing the
read/write accessors.
We forgot to remove the previous type ARM_CP_NO_RAW. This is not
really a problem since the field is overwritten. However it makes
code review confuse, so remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200812111223.7787-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When performing a CSR access let's return a negative exception value on
an error instead of -1. This will allow us to specify the exception in
future patches.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com
Message-Id: <a487dad60c9b8fe7a2b992c5e0dcc2504a9000a7.1597259519.git.alistair.francis@wdc.com>
* hw/cpu/a9mpcore: Verify the machine use Cortex-A9 cores
* hw/arm/smmuv3: Implement SMMUv3.2 range-invalidation
* docs/system/arm: Document the Xilinx Versal Virt board
* target/arm: Make M-profile NOCP take precedence over UNDEF
* target/arm: Use correct FPST for VCMLA, VCADD on fp16
* target/arm: Various cleanups preparing for fp16 support
-----BEGIN PGP SIGNATURE-----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=cuKX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200824' into staging
target-arm queue:
* hw/cpu/a9mpcore: Verify the machine use Cortex-A9 cores
* hw/arm/smmuv3: Implement SMMUv3.2 range-invalidation
* docs/system/arm: Document the Xilinx Versal Virt board
* target/arm: Make M-profile NOCP take precedence over UNDEF
* target/arm: Use correct FPST for VCMLA, VCADD on fp16
* target/arm: Various cleanups preparing for fp16 support
# gpg: Signature made Mon 24 Aug 2020 10:47:14 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200824: (27 commits)
target/arm: Use correct FPST for VCMLA, VCADD on fp16
target/arm: Implement FPST_STD_F16 fpstatus
target/arm: Make A32/T32 use new fpstatus_ptr() API
target/arm: Replace A64 get_fpstatus_ptr() with generic fpstatus_ptr()
target/arm: Delete unused ARM_FEATURE_CRC
target/arm/translate.c: Delete/amend incorrect comments
target/arm: Delete unused VFP_DREG macros
target/arm: Remove ARCH macro
target/arm: Convert T32 coprocessor insns to decodetree
target/arm: Do M-profile NOCP checks early and via decodetree
target/arm: Tidy up disas_arm_insn()
target/arm: Convert A32 coprocessor insns to decodetree
target/arm: Separate decode from handling of coproc insns
target/arm: Pull handling of XScale insns out of disas_coproc_insn()
docs/system/arm: Document the Xilinx Versal Virt board
hw/arm/smmuv3: Advertise SMMUv3.2 range invalidation
hw/arm/smmuv3: Support HAD and advertise SMMUv3.1 support
hw/arm/smmuv3: Let AIDR advertise SMMUv3.0 support
hw/arm/smmuv3: Fix IIDR offset
hw/arm/smmuv3: Get prepared for range invalidation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When we implemented the VCMLA and VCADD insns we put in the
code to handle fp16, but left it using the standard fp status
flags. Correct them to use FPST_STD_F16 for fp16 operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-5-peter.maydell@linaro.org
Architecturally, Neon FP16 operations use the "standard FPSCR" like
all other Neon operations. However, this is defined in the Arm ARM
pseudocode as "a fixed value, except that FZ16 (and AHP) follow the
FPSCR bits". In QEMU, the softfloat float_status doesn't include
separate flush-to-zero for FP16 operations, so we must keep separate
fp_status for "Neon non-FP16" and "Neon fp16" operations, in the
same way we do already for the non-Neon "fp_status" vs "fp_status_f16".
Add the extra float_status field to the CPU state structure,
ensure it is correctly initialized and updated on FPSCR writes,
and make fpstatus_ptr(FPST_STD_F16) return a pointer to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-4-peter.maydell@linaro.org
Make A32/T32 code use the new fpstatus_ptr() API:
get_fpstatus_ptr(0) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(1) -> fpstatus_ptr(FPST_STD)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-3-peter.maydell@linaro.org
We currently have two versions of get_fpstatus_ptr(), which both take
an effectively boolean argument:
* the one for A64 takes "bool is_f16" to distinguish fp16 from other ops
* the one for A32/T32 takes "int neon" to distinguish Neon from other ops
This is confusing, and to implement ARMv8.2-FP16 the A32/T32 one will
need to make a four-way distinction between "non-Neon, FP16",
"non-Neon, single/double", "Neon, FP16" and "Neon, single/double".
The A64 version will then be a strict subset of the A32/T32 version.
To clean this all up, we want to go to a single implementation which
takes an enum argument with values FPST_FPCR, FPST_STD,
FPST_FPCR_F16, and FPST_STD_F16. We rename the function to
fpstatus_ptr() so that unconverted code gets a compilation error
rather than silently passing the wrong thing to the new function.
This commit implements that new API, and converts A64 to use it:
get_fpstatus_ptr(false) -> fpstatus_ptr(FPST_FPCR)
get_fpstatus_ptr(true) -> fpstatus_ptr(FPST_FPCR_F16)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200806104453.30393-2-peter.maydell@linaro.org
In commit 962fcbf2ef we converted the uses of the
ARM_FEATURE_CRC bit to use the aa32_crc32 isar_feature test
instead. However we forgot to remove the now-unused definition
of the feature name in the enum. Delete it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200805210848.6688-1-peter.maydell@linaro.org
In arm_tr_init_disas_context() we have a FIXME comment that suggests
"cpu_M0 can probably be the same as cpu_V0". This isn't in fact
possible: cpu_V0 is used as a temporary inside gen_iwmmxt_shift(),
and that function is called in various places where cpu_M0 contains a
live value (i.e. between gen_op_iwmmxt_movq_M0_wRn() and
gen_op_iwmmxt_movq_wRn_M0() calls). Remove the comment.
We also have a comment on the declarations of cpu_V0/V1/M0 which
claims they're "for efficiency". This isn't true with modern TCG, so
replace this comment with one which notes that they're only used with
the iwmmxt decode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803132815.3861-1-peter.maydell@linaro.org
As part of the Neon decodetree conversion we removed all
the uses of the VFP_DREG macros, but forgot to remove the
macro definitions. Do so now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200803124848.18295-1-peter.maydell@linaro.org
The ARCH() macro was used a lot in the legacy decoder, but
there are now just two uses of it left. Since a macro which
expands out to a goto is liable to be confusing when reading
code, replace the last two uses with a simple open-coded
qeuivalent.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-8-peter.maydell@linaro.org
Convert the T32 coprocessor instructions to decodetree.
As with the A32 conversion, this corrects an underdecoding
where we did not check that MRRC/MCRR [24:21] were 0b0010
and so treated some kinds of LDC/STC and MRRC/MCRR rather
than UNDEFing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-7-peter.maydell@linaro.org
For M-profile CPUs, the architecture specifies that the NOCP
exception when a coprocessor is not present or disabled should cover
the entire wide range of coprocessor-space encodings, and should take
precedence over UNDEF exceptions. (This is the opposite of
A-profile, where checking for a disabled FPU has to happen last.)
Implement this with decodetree patterns that cover the specified
ranges of the encoding space. There are a few instructions (VLLDM,
VLSTM, and in v8.1 also VSCCLRM) which are in copro-space but must
not be NOCP'd: these must be handled also in the new m-nocp.decode so
they take precedence.
This is a minor behaviour change: for unallocated insn patterns in
the VFP area (cp=10,11) we will now NOCP rather than UNDEF when the
FPU is disabled.
As well as giving us the correct architectural behaviour for v8.1M
and the recommended behaviour for v8.0M, this refactoring also
removes the old NOCP handling from the remains of the 'legacy
decoder' in disas_thumb2_insn(), paving the way for cleaning that up.
Since we don't currently have a v8.1M feature bit or any v8.1M CPUs,
the minor changes to this logic that we'll need for v8.1M are marked
up with TODO comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-6-peter.maydell@linaro.org
The only thing left in the "legacy decoder" is the handling
of disas_xscale_insn(), and we can simplify the code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-5-peter.maydell@linaro.org
Convert the A32 coprocessor instructions to decodetree.
Note that this corrects an underdecoding: for the 64-bit access case
(MRRC/MCRR) we did not check that bits [24:21] were 0b0010, so we
would incorrectly treat LDC/STC as MRRC/MCRR rather than UNDEFing
them.
The decodetree versions of these insns assume the coprocessor
is in the range 0..7 or 14..15. This is architecturally sensible
(as per the comments) and OK in practice for QEMU because the only
uses of the ARMCPRegInfo infrastructure we have that aren't
for coprocessors 14 or 15 are the pxa2xx use of coprocessor 6.
We add an assertion to the define_one_arm_cp_reg_with_opaque()
function to catch any accidental future attempts to use it to
define coprocessor registers for invalid coprocessors.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-4-peter.maydell@linaro.org
As a prelude to making coproc insns use decodetree, split out the
part of disas_coproc_insn() which does instruction decoding from the
part which does the actual work, and make do_coproc_insn() handle the
UNDEF-on-bad-permissions and similar cases itself rather than
returning 1 to eventually percolate up to a callsite that calls
unallocated_encoding() for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-3-peter.maydell@linaro.org
At the moment we check for XScale/iwMMXt insns inside
disas_coproc_insn(): for CPUs with ARM_FEATURE_XSCALE all copro insns
with cp 0 or 1 are handled specially. This works, but is an odd
place for this check, because disas_coproc_insn() is called from both
the Arm and Thumb decoders but the XScale case never applies for
Thumb (all the XScale CPUs were ARMv5, which has only Thumb1, not
Thumb2 with the 32-bit coprocessor insn encodings). It also makes it
awkward to convert the real copro access insns to decodetree.
Move the identification of XScale out to its own function
which is only called from disas_arm_insn().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200803111849.13368-2-peter.maydell@linaro.org
Trap mbar-sleeps from user-space.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use atomic_cmpxchg to implement the atomic cmpxchg sequence.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add support for data-access barriers.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move LOG_DIS log to before sleeping handling so that it logs
for sleep instructions aswell.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Transfer dc->rd to mbar_imm to improve the readability when
comparing to the specs.
No functional change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
-----BEGIN PGP SIGNATURE-----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=L9Wi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200818' into staging
ppc patch queue 2020-08-18
Here's my first pull request for qemu-5.2, which has quite a few
accumulated things. Highlights are:
* Preliminary support for POWER10 (Power ISA 3.1) instruction emulation
* Add documentation on the (very confusing) pseries NUMA configuration
* Fix some bugs handling edge cases with XICS, XIVE and kernel_irqchip
* Fix icount for a number of POWER registers
* Many cleanups to error handling in XIVE code
* Validate size of -prom-env data
# gpg: Signature made Tue 18 Aug 2020 05:18:36 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.2-20200818: (40 commits)
spapr/xive: Use xive_source_esb_len()
nvram: Exit QEMU if NVRAM cannot contain all -prom-env data
spapr/xive: Simplify error handling of kvmppc_xive_cpu_synchronize_state()
ppc/xive: Simplify error handling in xive_tctx_realize()
spapr/xive: Simplify error handling in kvmppc_xive_connect()
ppc/xive: Fix error handling in vmstate_xive_tctx_*() callbacks
spapr/xive: Fix error handling in kvmppc_xive_post_load()
spapr/kvm: Fix error handling in kvmppc_xive_pre_save()
spapr/xive: Rework error handling of kvmppc_xive_set_source_config()
spapr/xive: Rework error handling in kvmppc_xive_get_queues()
spapr/xive: Rework error handling of kvmppc_xive_[gs]et_queue_config()
spapr/xive: Rework error handling of kvmppc_xive_cpu_[gs]et_state()
spapr/xive: Rework error handling of kvmppc_xive_mmap()
spapr/xive: Rework error handling of kvmppc_xive_source_reset()
spapr/xive: Rework error handling of kvmppc_xive_cpu_connect()
spapr: Simplify error handling in spapr_phb_realize()
spapr/xive: Convert KVM device fd checks to assert()
ppc/xive: Introduce dedicated kvm_irqchip_in_kernel() wrappers
ppc/xive: Rework setup of XiveSource::esb_mmio
target/ppc: Integrate icount to purr, vtb, and tbu40
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The minimum granularity of PMP is 4 bytes, it is small than 4KB page
size, therefore, the pmp checking would be ignored if its range doesn't
start from the alignment of one page. This patch detects the pmp entries
and sets the small page size to TLB if there is a PMP entry which cover
the page size.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <6b0bf48662ef26ab4c15381a08e78a74ebd7ca79.1595924470.git.zong.li@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The real physical address should add the 12 bits page offset. It also
causes the PMP wrong checking due to the minimum granularity of PMP is
4 byte, but we always get the physical address which is 4KB alignment,
that means, we always use the start address of the page to check PMP for
all addresses which in the same page.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <370a983d0f9e8a9a927b9bb8af5e7bc84b1bf9b1.1595924470.git.zong.li@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
First, sizeof(target_ulong) equals to 4 on riscv32, so this change
does not change the function on riscv32. Second, sizeof(target_ulong)
equals to 8 on riscv64, and 'reg_index * 8 + i' is not a legal
pmp_index (we will explain later), which should be 'reg_index * 4 + i'.
If the parameter reg_index equals to 2 (means that we will change the
value of pmpcfg2, or the second pmpcfg on riscv64), then
pmpcfg_csr_write(env, 2, val) will map write tasks to
pmp_write_cfg(env, 2 * 8 + [0...7], val). However, no cfg csr is indexed
by value 16 or 23 on riscv64, so we consider it as a bug.
We are looking for constant (e.g., define a new constant named
RISCV_WORD_SIZE) in QEMU to help others understand code better,
but none was found. A possible good explanation of this literal is it is
the minimum word length on riscv is 4 bytes (32 bit).
Signed-off-by: Hongzheng-Li <Ethan.Lee.QNL@gmail.com>
Signed-off-by: Hou Weiying <weiying_hou@outlook.com>
Signed-off-by: Myriad-Dreamin <camiyoru@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <SG2PR02MB263420036254AC8841F66CE393460@SG2PR02MB2634.apcprd02.prod.outlook.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200626205917.4545-5-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724002807.441147-8-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use tcg_gen_extu_tl_i64 to avoid the ifdef.
Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200626205917.4545-7-zhiwei_liu@c-sky.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200724002807.441147-7-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If a 32-bit input is not properly nanboxed, then the input is replaced
with the default qnan. The only inline expansion is for the sign-changing
set of instructions: FSGNJ.S, FSGNJX.S, FSGNJN.S.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-6-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If a 32-bit input is not properly nanboxed, then the input is
replaced with the default qnan.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-5-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Make sure that all results from inline single-precision scalar
operations are properly nan-boxed to 64-bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do not depend on the RVD extension, take input and output via
TCGv_i64 instead of fpu regno. Move the function to translate.c
so that it can be used in multiple trans_*.inc.c files.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Make sure that all results from single-precision scalar helpers
are properly nan-boxed to 64-bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
Message-Id: <20200724002807.441147-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>