Guests may leave devices in a low power state at reboot, but we expect
devices to be woken up for the next boot. Make this happen.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Often when debugging it's useful to be able to disable bypass paths
so no interactions with the device are missed. Add some extra debug
options to do this. Also add device info on read/write BAR accesses,
which is useful when debugging more than one assigned device. A
couple DPRINTFs also had redundant "vfio:" prefixes.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Graphics cards have a number of different backdoors. Some of these
are alternative ways to get PCI BAR addresses, some of them are
complete mirrors of PCI config space available through MMIO and
I/O port access. These quirks cover a number of ATI Radeon and
Nvidia devices. On the ATI/AMD side, this should enable HD5450
and HD7850 and hopefully a host of devices around those generations.
For Nvidia, my card selection is much more dated. A 8400gs works
well with both the Window shipped driver and the Nvidia downloaded
driver. A 7300le works as well, with the caveat that generating
the Window experience index with the Nvidia driver causes the card
to reset several times before generating a BSOD. An NVS 290 card
seems to run well with the shipped Windows driver, but generates
a BSOD with the Nvidia driver. All of the Nvidia devices work with
the Linux Nvidia proprietary driver and nouveau, the HD5450 works
with either radeon or fglrx, HD7850 works with vesa and fglrx (not
supported by radeon). Extremely limited 3D testing.
Device reset is also an issue with graphics. It's unfortunately
very common that the devices offer no means to reset the card or
doesn't seem effective. Nvidia devices are pretty good about being
able to get the device to a working state through the VGA BIOS init,
Radeon devices less so, and often require a host reboot. Work
remains to be done here.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Most VGA cards need some kind of quirk to fully operate since they
hide backdoors to get to other registers outside of PCI config space
within the registers, but this provides the base infrastructure. If
we could identity map PCI resources for assigned devices we would need
a lot fewer quirks.
To enable this, use a kernel side vfio-pci driver that incorporates
VGA support (v3.9), and use the -vga none option and add the x-vga=on
option for the vfio-pci device. The "x-" denotes this as an
experimental feature. You may also need to use a cached copy of the
VGA BIOS for your device, passing it to vfio-pci using the romfile=
option.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Windows seems to pay particular interest to the PCIe header type of
devices and will fail to load drivers if we attach Endpoint devices or
Legacy Endpoint devices to the Root Complex. We can use
pci_bus_is_express and pci_bus_is_root to determine the bus type and
mangle the type appropriately:
* Legacy PCI
* No change, capability is unmodified for compatibility.
* PCI Express
* Integrated Root Complex Endpoint -> Endpoint
* PCI Express Root Complex
* Endpoint -> Integrated Root Complex Endpoint
* Legacy Endpoint -> none, capability hidden
We also take this opportunity to explicitly limit supported devices
to Endpoints, Legacy Endpoints, and Root Complex Integrated Endpoints.
We don't currently have support for other types and users often cause
themselves problems by assigning them.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Kernel-side vfio virtualizes all of config space, but some parts are
unique to Qemu. For instance we may or may not expose the ROM BAR,
Qemu manages MSI/MSIX, and Qemu manages the multi-function bit so that
single function devices can appear as multi-function and vica versa.
Generalize this into a bitmap of Qemu emulated bits.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
valids can equals to -1 if the reg/mem string is empty. Change the
expression to have an empty xor mask in that case.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The inner loop should only change the current bit of the result, instead
of the whole result.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pcmpXstrX instructions in "Equal each" mode force both invalid element
pair to true. It means (upper - MAX(valids, validd)) bits should be set
to 1, not (upper - MAX(valids, validd) + 1).
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the order of the of the comparisons to match the "Intel 64 and
IA-32 Architectures Software Developer's Manual".
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
pcmpXstrm instructions returns their result in the XMM0 register and
not in the first operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
ffs1 returns the first bit set to one starting counting from the most
significant bit.
pcmpXstri returns the most significant bit set to one, starting counting
from the least significant bit.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The "Intel 64 and IA-32 Architectures Software Developer's Manual" (at
least recent versions) clearly says that the comparison is signed.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
gen_op_mov_TN_reg() loads the value in cpu_T[0], so this temporary should
be used instead of cpu_tmp0.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
# By Dunrong Huang (1) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
hw/tcx: Remove unused 'addr' field and the property that sets it
hw/i386/pc: format load_linux function
configure: show debug-info option in --help output
Remove the sysbus_add_memory and sysbus_del_memory functions. These
are trivial wrappers for mapping a memory region into the system
memory space, and have no users now. Sysbus devices should never map
their own memory regions anyway; the correct API for mapping an mmio
region is for the creator of the device to use sysbus_mmio_map.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make sure we set the buffer to something in the softusb_read_{dmem,pmem}
error paths, since the caller will use the buffer unconditionally.
(Newer gcc is smart enough to spot this and complain about 'may be
used uninitialized'.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1364496184-11994-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Don't map the pmem and dmem RAM memory regions in the milkymist-softusb
device itself. Instead just expose them as sysbus mmio regions which
the device creator can map appropriately. This allows us to drop the
pmem_base and dmem_base properties. Instead of going via
cpu_physical_memory_read/_write when the device wants to access the
RAMs, we just keep a host pointer to the memory and use that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Just expose the register buffers memory as a standard sysbus mmio
region which the creator of the device can map, rather than
providing a qdev property which the creator has to set to the
base address and then doing the mapping in the device's own
init function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael Walle <michael@walle.cc>
Message-id: 1363358063-23973-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make musicpal-misc into its own (trivial) qdev device, so we
can get rid of the abuse of sysbus_add_memory().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363358063-23973-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the SysBusDeviceClass::init optional, for devices which
genuinely don't need to do anything here. In particular, simple
devices which can do all their initialization in their
instance_init method don't need either a DeviceClass::realize
or SysBusDeviceClass::init method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363358063-23973-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The value of "do_interrupt" member of CPUClass shoule be set to a
target-specific function, or it will lead to a segfault like below:
$ moxie-softmmu/qemu-system-moxie -M moxiesim
Segmentation fault
Cc: Anthony Green <green@moxielogic.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Dunrong Huang <huangdr@cloud-times.com>
Signed-of-by: Anthony Green <green@moxielogic.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The cross i586-mingw32msvc-gcc 4.4.4 from Debian Squeeze does not support
__sync_val_compare_and_swap by default.
Using -march=i686 fixes that and should also result in better code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The type cast must use tcg_target_long instead of long.
This makes a difference for hosts where sizeof(long) != sizeof(void *).
Cc: Anthony Green <green@moxielogic.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Green <green@moxielogic.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Define and use I440FX_PCI_DEVICE() instead of using DO_UPCAST().
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1361580039-4459-2-git-send-email-dwmw2@infradead.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux uses the lowest enslaved MAC address as the MAC address of
the bridge. Set MAC address to a high value so that it does not
affect the MAC address of the bridge.
Changing the MAC address of the bridge could cause a few seconds
of network downtime.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1363971468-21154-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-balloon-pci is switched to the new API, we can use QOM
casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-balloon-ccw is modified for the new API. The device
virtio-balloon-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-balloon during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-balloon-pci is modified for the new API. The device
virtio-balloon-pci extends virtio-pci. It creates and connects a
virtio-balloon during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-balloon which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1364377755-15508-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Kevin Wolf (22) and Peter Lieven (1)
# Via Stefan Hajnoczi
* stefanha/block: (23 commits)
block: Fix direct use of protocols as driver for bdrv_open()
qcow2: Gather clusters in a looping loop
qcow2: Move cluster gathering to a non-looping loop
qcow2: Allow requests with multiple l2metas
qcow2: Use byte granularity in qcow2_alloc_cluster_offset()
qcow2: Prepare handle_alloc/copied() for byte granularity
qcow2: handle_copied(): Implement non-zero host_offset
qcow2: handle_copied(): Get rid of keep_clusters parameter
qcow2: handle_copied(): Get rid of nb_clusters parameter
qcow2: Factor out handle_copied()
qcow2: Clean up handle_alloc()
qcow2: Finalise interface of handle_alloc()
qcow2: handle_alloc(): Get rid of keep_clusters parameter
qcow2: handle_alloc(): Get rid of nb_clusters parameter
qcow2: Factor out handle_alloc()
qcow2: Decouple cluster allocation from cluster reuse code
qcow2: Change handle_dependency to byte granularity
qcow2: Improve check for overlapping allocations
qcow2: Handle dependencies earlier
qcow2: Remove bogus unlock of s->lock
...
# By Lluís Vilanova (7) and others
# Via Stefan Hajnoczi
* stefanha/tracing:
vl: add runstate_set tracepoint
.gitignore: rename trace/generated-tracers.dtrace
.gitignore: add trace/generated-events.[ch]
trace: rebuild generated-events.o when configuration changes
trace: [stderr] Port to generic event information and new control interface
trace: [simple] Port to generic event information and new control interface
trace: [default] Port to generic event information and new control interface
trace: [monitor] Use new event control interface
trace: Provide a detailed event control interface
trace: Provide a generic tracing event descriptor
trace: [tracetool] Explicitly identify public backends
This patch enables us to know RunState transition. It will be userful
for investigation when the trouble occured in special event such like
live migration, shutdown, suspend, and so on.
Signed-off-by: Kazuya Saito <saito.kazuya@jp.fujitsu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For a while the file was called trace/generated-tracers-dtrace.dtrace
but today it's called trace/generated-tracers.dtrace.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make sure to rebuild generated-events.o when ./configure options change.
This prevents linker errors when a stale generated-events.o gets linked
with code compiled against fresh headers. For example, try building
with ./configure --enable-trace-backend=stderr followed by ./configure
--enable-trace-backend=dtrace.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The backend is forced to dump event numbers using 64 bits, as TraceEventID is
an enum.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This interface decouples event obtaining from interaction.
Events can be obtained through three different methods:
* identifier
* name
* simple wildcard pattern
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Uses tracetool to generate a backend-independent tracing event description
(struct TraceEvent).
The values for such structure are generated with the non-public "events"
backend ("events-c" frontend).
The generation of the defines to check if an event is statically enabled is also
moved to the "events" backend ("events-h" frontend).
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>