PowerPC has two KVM types (HV, PR) that translate into three kernel
modules:
kvm.ko - common kvm code
kvm_hv.ko - kvm running with MSR_HV=1 or MSR_HV|PR=0 in a nested guest.
kvm_pr.ko - kvm running in usermode MSR_PR=1.
Since the two KVM types can both be running at the same time, this
creates a situation in which it is possible for one or both of the
modules to fail to initialize, leaving the generic one behind. This
leads QEMU to think it can create a guest, but KVM will fail when
calling the type-specific code:
ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
qemu-kvm: failed to initialize KVM: Invalid argument
Ideally this would be solved kernel-side, but it might be a while
until we can get rid of one of the modules. So in the meantime this
patch tries to make this less confusing for the end user by adding a
more elucidative message:
ioctl(KVM_CREATE_VM) failed: 22 Invalid argument
PPC KVM module is not loaded. Try 'modprobe kvm_hv'.
[dwg: Fixed error in #elif which failed compile on !ppc hosts]
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Message-Id: <20210722141340.2367905-1-farosas@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Coverity reported issues which are caused by mixing of signed return codes
from DTC and unsigned return codes of the client interface.
This introduces PROM_ERROR and makes distinction between the error types.
This fixes NEGATIVE_RETURNS, OVERRUN issues reported by Coverity.
This adds a comment about the return parameters number in the VOF hcall.
The reason for such counting is to keep the numbers look the same in
vof_client_handle() and the Linux (an OF client).
vmc->client_architecture_support() returns target_ulong and we want to
propagate this to the client (for example H_MULTI_THREADS_ACTIVE).
The VOF path to do_client_architecture_support() needs chopping off
the top 32bit but SLOF's H_CAS does not; and either way the return values
are either 0 or 32bit negative error code. For now this chops
the top 32bits.
This makes "claim" fail if the allocated address is above 4GB as
the client interface is 32bit. This still allows claiming memory above
4GB as potentially initrd can be put there and the client can read
the address from the FDT's "available" property.
Fixes: CID 1458139, 1458138, 1458137, 1458133, 1458132
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20210720050726.2737405-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In commit 8f0a4b6a9b, we started to require L=0 for ppc32 to match what
The Programming Environments Manual say:
"For 32-bit implementations, the L field must be cleared, otherwise
the instruction form is invalid."
The stricter behavior, however, broke AROS boot on sam460ex, which is a
regression from 6.0. This patch partially reverts the change, raising
the exception only for CPUs known to require L=0 (e500 and e500mc) and
logging a guest error for other cases.
Both behaviors are acceptable by the PowerISA, which allows "the system
illegal instruction error handler to be invoked or yield boundedly
undefined results."
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Fixes: 8f0a4b6a9b ("target/ppc: Move cmp/cmpi/cmpl/cmpli to decodetree")
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20210720135507.2444635-1-matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Add the differential clock input feature bit to the generated SPD
data. Most guests don't seem to care but pegasos2 firmware version 1.2
checks for this bit and stops with unsupported module type error if
it's not present. Since this feature is likely present on real memory
modules add it in the general code rather than patching the generated
SPD data in pegasos2 board only.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <19d42ade295d5297aa624a9eb757b8df18cf64d6.1626367844.git.balaton@eik.bme.hu>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The -append option is currently not compatible with -bios (as we don't
yet emulate nvram so we can only put it in the environment with VOF).
Therefore a warning is printed if -append is used with -bios but
because the default value of kernel_cmdline seems to be an empty
string instead of NULL this warning was printed even without -append
when -bios is used. Only print warning if -append is given.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <483ac599a1407b766179aaea2794aed60cc09f53.1626367844.git.balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We continue after -smp help:
$ qemu-system-x86_64 -smp help -display none -monitor stdio
smp-opts options:
cores=<num>
cpus=<num>
dies=<num>
maxcpus=<num>
sockets=<num>
threads=<num>
QEMU 6.0.50 monitor - type 'help' for more information
(qemu)
Other options, such as -object help and -device help, don't.
Adjust -smp not to continue either.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-17-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@ionos.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
* hw/arm/smmuv3: Check 31st bit to see if CD is valid
* qemu-options.hx: Fix formatting of -machine memory-backend option
* hw: aspeed_gpio: Fix memory size
* hw/arm/nseries: Display hexadecimal value with '0x' prefix
* Add sve-default-vector-length cpu property
* docs: Update path that mentions deprecated.rst
* hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
* hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
* hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
* target/arm: Report M-profile alignment faults correctly to the guest
* target/arm: Add missing 'return's after calling v7m_exception_taken()
* target/arm: Enforce that M-profile SP low 2 bits are always zero
-----BEGIN PGP SIGNATURE-----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=ru4w
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210727' into staging
target-arm queue:
* hw/arm/smmuv3: Check 31st bit to see if CD is valid
* qemu-options.hx: Fix formatting of -machine memory-backend option
* hw: aspeed_gpio: Fix memory size
* hw/arm/nseries: Display hexadecimal value with '0x' prefix
* Add sve-default-vector-length cpu property
* docs: Update path that mentions deprecated.rst
* hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
* hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
* hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
* target/arm: Report M-profile alignment faults correctly to the guest
* target/arm: Add missing 'return's after calling v7m_exception_taken()
* target/arm: Enforce that M-profile SP low 2 bits are always zero
# gpg: Signature made Tue 27 Jul 2021 11:46:17 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210727:
hw: aspeed_gpio: Fix memory size
hw/arm/nseries: Display hexadecimal value with '0x' prefix
target/arm: Add sve-default-vector-length cpu property
target/arm: Export aarch64_sve_zcr_get_valid_len
target/arm: Correctly bound length in sve_zcr_get_valid_len
docs: Update path that mentions deprecated.rst
hw/intc/armv7m_nvic: for v8.1M VECTPENDING hides S exceptions from NS
hw/intc/armv7m_nvic: Correct size of ICSR.VECTPENDING
hw/intc/armv7m_nvic: ISCR.ISRPENDING is set for non-enabled pending interrupts
target/arm: Report M-profile alignment faults correctly to the guest
target/arm: Add missing 'return's after calling v7m_exception_taken()
target/arm: Enforce that M-profile SP low 2 bits are always zero
qemu-options.hx: Fix formatting of -machine memory-backend option
hw/arm/smmuv3: Check 31st bit to see if CD is valid
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro used to calculate the maximum memory size of the MMIO region
had a mistake, causing all GPIO models to create a mapping of 0x9D8.
The intent was to have it be 0x9D8 - 0x800.
This extra size doesn't matter on ast2400 and ast2500, which have a 4KB
region set aside for the GPIO controller.
On the ast2600 the 3.3V and 1.8V GPIO controllers are 2KB apart, so the
regions would overlap. Worse was the 1.8V controller would map over the
top of the following peripheral, which happens to be the RTC.
The mmio region used by each device is a maximum of 2KB, so avoid the
calculations and hard code this as the maximum.
Fixes: 36d737ee82 ("hw/gpio: Add in AST2600 specific implementation")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20210713065854.134634-2-joel@jms.id.au
[PMM: fix autocorrect error in commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210726150953.1218690-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mirror the behavour of /proc/sys/abi/sve_default_vector_length
under the real linux kernel. We have no way of passing along
a real default across exec like the kernel can, but this is a
decent way of adjusting the startup vector length of a process.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/482
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-4-richard.henderson@linaro.org
[PMM: tweaked docs formatting, document -1 special-case,
added fixup patch from RTH mentioning QEMU's maximum veclen.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename from sve_zcr_get_valid_len and make accessible
from outside of helper.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, our only caller is sve_zcr_len_for_el, which has
already masked the length extracted from ZCR_ELx, so the
masking done here is a nop. But we will shortly have uses
from other locations, where the length will be unmasked.
Saturate the length to ARM_MAX_VQ instead of truncating to
the low 4 bits.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723203344.968563-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Missed in commit f3478392 "docs: Move deprecation, build
and license info out of system/"
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20210723065828.1336760-1-maozhongyi@cmss.chinamobile.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In Arm v8.1M the VECTPENDING field in the ICSR has new behaviour: if
the register is accessed NonSecure and the highest priority pending
enabled exception (that would be returned in the VECTPENDING field)
targets Secure, then the VECTPENDING field must read 1 rather than
the exception number of the pending exception. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-7-peter.maydell@linaro.org
The VECTPENDING field in the ICSR is 9 bits wide, in bits [20:12] of
the register. We were incorrectly masking it to 8 bits, so it would
report the wrong value if the pending exception was greater than 256.
Fix the bug.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-6-peter.maydell@linaro.org
The ISCR.ISRPENDING bit is set when an external interrupt is pending.
This is true whether that external interrupt is enabled or not.
This means that we can't use 's->vectpending == 0' as a shortcut to
"ISRPENDING is zero", because s->vectpending indicates only the
highest priority pending enabled interrupt.
Remove the incorrect optimization so that if there is no pending
enabled interrupt we fall through to scanning through the whole
interrupt array.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-5-peter.maydell@linaro.org
For M-profile, we weren't reporting alignment faults triggered by the
generic TCG code correctly to the guest. These get passed into
arm_v7m_cpu_do_interrupt() as an EXCP_DATA_ABORT with an A-profile
style exception.fsr value of 1. We didn't check for this, and so
they fell through into the default of "assume this is an MPU fault"
and were reported to the guest as a data access violation MPU fault.
Report these alignment faults as UsageFaults which set the UNALIGNED
bit in the UFSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-4-peter.maydell@linaro.org
In do_v7m_exception_exit(), we perform various checks as part of
performing the exception return. If one of these checks fails, the
architecture requires that we take an appropriate exception on the
existing stackframe. We implement this by calling
v7m_exception_taken() to set up to take the new exception, and then
immediately returning from do_v7m_exception_exit() without proceeding
any further with the unstack-and-exception-return process.
In a couple of checks that are new in v8.1M, we forgot the "return"
statement, with the effect that if bad code in the guest tripped over
these checks we would set up to take a UsageFault exception but then
blunder on trying to also unstack and return from the original
exception, with the probable result that the guest would crash.
Add the missing return statements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-3-peter.maydell@linaro.org
For M-profile, unlike A-profile, the low 2 bits of SP are defined to be
RES0H, which is to say that they must be hardwired to zero so that
guest attempts to write non-zero values to them are ignored.
Implement this behaviour by masking out the low bits:
* for writes to r13 by the gdbstub
* for writes to any of the various flavours of SP via MSR
* for writes to r13 via store_reg() in generated code
Note that all the direct uses of cpu_R[] in translate.c are in places
where the register is definitely not r13 (usually because that has
been checked for as an UNDEFINED or UNPREDICTABLE case and handled as
UNDEF).
All the other writes to regs[13] in C code are either:
* A-profile only code
* writes of values we can guarantee to be aligned, such as
- writes of previous-SP-value plus or minus a 4-aligned constant
- writes of the value in an SP limit register (which we already
enforce to be aligned)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210723162146.5167-2-peter.maydell@linaro.org
The documentation of the -machine memory-backend has some minor
formatting errors:
* Misindentation of the initial line meant that the whole option
section is incorrectly indented in the HTML output compared to
the other -machine options
* The examples weren't indented, which meant that they were formatted
as plain run-on text including outputting the "::" as text.
* The a) b) list has no rst-format markup so it is rendered as
a single run-on paragraph
Fix the formatting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210719105257.3599-1-peter.maydell@linaro.org
The bit to see if a CD is valid is the last bit of the first word of the CD.
Signed-off-by: Joe Komlodi <joe.komlodi@xilinx.com>
Message-id: 1626728232-134665-2-git-send-email-joe.komlodi@xilinx.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter's fix for a bunch of races
-> Seem to fix the occasional crash seen by Peter
Wei's fix for migration with free page hinting
-> Bug has been around for a while, but makes a huge difference
My fix for OpenBSD test corner case
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=jNI0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20210726a' into staging
Migration fixes 2021-07-26
Peter's fix for a bunch of races
-> Seem to fix the occasional crash seen by Peter
Wei's fix for migration with free page hinting
-> Bug has been around for a while, but makes a huge difference
My fix for OpenBSD test corner case
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 26 Jul 2021 13:42:16 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-migration-20210726a:
migration: clear the memory region dirty bitmap when skipping free pages
migration: Move the yank unregister of channel_close out
migration: Teach QEMUFile to be QIOChannel-aware
migration: Introduce migration_ioc_[un]register_yank()
migration: Make from_dst_file accesses thread-safe
migration: Fix missing join() of rp_thread
tests/qtest/migration-test.c: use 127.0.0.1 instead of 0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace bitrev8 with revbit8.
Fixes for set but not used warnings.
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmD/LQEdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9RnwgAq3wti4fF3FrSUCQ5
zsspEi2JIU1dybpxjM9PXqi9uXZiO4ITlCrhmB9o+7DA78/rx/EjoAqFNK5MyPf4
v1g12LvuuwxwOv6LMPiH5io+Aygbaz8Xk+AJsYr6eMMxh+4zLcyiYg03eBH65IkS
1HceGon67gYHjIqeb9OJ6R6VgvSwCsZ3J+uAR1f4/BzfwoM/+zxMFiWzwFTJxX1t
sc7VhX1dZwoVJoCUtL52+7a8kVMFud70aOuE0Uwlwt1nryf1HUHTS26ghF95e/6v
+QPZEobbfuyt+X97/qiRGYHzYLDrJX1SiBZ3vTIUNoDUDip2Nyt3SncYTXHuEoHy
SN6vFw==
=4/cY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-tcg-20210726' into staging
Fix icount accounting.
Replace bitrev8 with revbit8.
Fixes for set but not used warnings.
# gpg: Signature made Mon 26 Jul 2021 22:45:37 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth-gitlab/tags/pull-tcg-20210726:
tests/unit: Remove unused variable from test_io
linux-user/syscall: Remove unused variable from execve
hw/pci-hist/pnv_phb4: Fix typo in pnv_phb4_ioda_write
hw/ppc/spapr_events: Remove unused variable from check_exception
hw/audio/adlib: Remove unused variable in adlib_callback
net/checksum: Remove unused variable in net_checksum_add_iov
util/selfmap: Discard mapping on error
accel/tcg: Remove unused variable in cpu_exec
nbd/server: Mark variable unused in nbd_negotiate_meta_queries
bitops.h: revert db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation")
accel/tcg: Remove unnecessary check on icount_extra in cpu_loop_exec_tb()
accel/tcg: Don't use CF_COUNT_MASK as the max value of icount_decr.u16.low
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a regression test for mmio read on big-endian hosts.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
The new PMR test unearthed a long-standing issue with MMIO reads on
big-endian hosts.
Fix this by unconditionally storing all controller registers in little
endian.
Cc: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Peter noticed that mmio access may read into the NvmeParams member in
the NvmeCtrl struct.
Fix the bounds check.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add the NvmeBarRegs enum and use these instead of explicit register
offsets.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
The specification uses a set of 32 bit PMRMSCL and PMRMSCU registers to
make up the 64 bit logical PMRMSC register.
Make it so.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Prior to this patch the nvme-ns devices are always children of the
NvmeBus owned by the NvmeCtrl. This causes the namespaces to be
unrealized when the parent device is removed. However, when subsystems
are involved, this is not what we want since the namespaces may be
attached to other controllers as well.
This patch adds an additional NvmeBus on the subsystem device. When
nvme-ns devices are realized, if the parent controller device is linked
to a subsystem, the parent bus is set to the subsystem one instead. This
makes sure that namespaces are kept alive and not unrealized.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This will test the PMR functionality.
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: replaced memory-backend-file with memory-backend-ram]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If the number of PRP/SGL mappings exceed 1024, reads and writes will
fail because of an internal QEMU limitation of max 1024 vectors.
Signed-off-by: Padmakar Kalghatgi <p.kalghatgi@samsung.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: changed the error message to be more generic]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Make sure the controller is unregistered from the subsystem when device
is removed.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
We currently lack the infrastructure to handle subsystem hotplugging, so
disable it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The nvme_ns_setup and nvme_ns_check_constraints should not depend on the
controller state. Refactor and remove it.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
From clang-13:
tests/unit/test-iov.c:161:26: error: variable 't' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
linux-user/syscall.c:8503:17: error: variable 'total_size' set but not used \
[-Werror,-Wunused-but-set-variable]
Acked-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/pci-host/pnv_phb4.c:375:18: error: variable 'v' set but not used \
[-Werror,-Wunused-but-set-variable]
It's pretty clear that we meant to write back 'v' after
all that computation and not 'val'.
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/ppc/spapr_events.c:937:14: error: variable 'xinfo' set but not used \
[-Werror,-Wunused-but-set-variable]
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
hw/audio/adlib.c:189:18: error: variable 'net' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
../qemu/net/checksum.c:189:23: error: variable 'buf_off' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
util/selfmap.c:26:21: error: variable 'errors' set but not used \
[-Werror,-Wunused-but-set-variable]
Quite right of course, but there's no reason not to check errors.
First, incrementing errors is incorrect, because qemu_strtoul
returns an errno not a count -- just or them together so that
we have a non-zero value at the end.
Second, if we have an error, do not add the struct to the list,
but free it instead.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
accel/tcg/cpu-exec.c:783:15: error: variable 'cc' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
From clang-13:
nbd/server.c:976:22: error: variable 'bitmaps' set but not used \
[-Werror,-Wunused-but-set-variable]
which is incorrect; see //bugs.llvm.org/show_bug.cgi?id=3888.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Commit db1ffc32dd ("qemu/bitops.h: add bitrev8 implementation") introduced
a bitrev8() function to reverse the bit ordering required for storing the
MAC address in the q800 PROM.
This function is not required since QEMU implements its own revbit8()
function which does exactly the same thing. Remove the extraneous
bitrev8() function and switch its only caller in hw/m68k/q800.c to
use revbit8() instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210725110557.3007-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>