|
SOEM v1.3.1
|
#include <ethercatmain.h>
Data Fields | |
| uint16 | state |
| uint16 | ALstatuscode |
| uint16 | configadr |
| uint16 | aliasadr |
| uint32 | eep_man |
| uint32 | eep_id |
| uint32 | eep_rev |
| uint16 | Itype |
| uint16 | Dtype |
| uint16 | Obits |
| uint32 | Obytes |
| uint8 * | outputs |
| uint8 | Ostartbit |
| uint16 | Ibits |
| uint32 | Ibytes |
| uint8 * | inputs |
| uint8 | Istartbit |
| ec_smt | SM [EC_MAXSM] |
| uint8 | SMtype [EC_MAXSM] |
| ec_fmmut | FMMU [EC_MAXFMMU] |
| uint8 | FMMU0func |
| uint8 | FMMU1func |
| uint8 | FMMU2func |
| uint8 | FMMU3func |
| uint16 | mbx_l |
| uint16 | mbx_wo |
| uint16 | mbx_rl |
| uint16 | mbx_ro |
| uint16 | mbx_proto |
| uint8 | mbx_cnt |
| boolean | hasdc |
| uint8 | ptype |
| uint8 | topology |
| uint8 | activeports |
| uint8 | consumedports |
| uint16 | parent |
| uint8 | parentport |
| uint8 | entryport |
| int32 | DCrtA |
| int32 | DCrtB |
| int32 | DCrtC |
| int32 | DCrtD |
| int32 | pdelay |
| uint16 | DCnext |
| uint16 | DCprevious |
| int32 | DCcycle |
| int32 | DCshift |
| uint8 | DCactive |
| uint16 | configindex |
| uint16 | SIIindex |
| uint8 | eep_8byte |
| uint8 | eep_pdi |
| uint8 | CoEdetails |
| uint8 | FoEdetails |
| uint8 | EoEdetails |
| uint8 | SoEdetails |
| int16 | Ebuscurrent |
| uint8 | blockLRW |
| uint8 | group |
| uint8 | FMMUunused |
| boolean | islost |
| int(* | PO2SOconfig )(uint16 slave) |
| char | name [EC_MAXNAME+1] |
for list of ethercat slaves detected
| uint8 ec_slavet::activeports |
active ports bitmap : ....3210 , set if respective port is active
| uint16 ec_slavet::aliasadr |
Alias address
| uint16 ec_slavet::ALstatuscode |
AL status code
| uint8 ec_slavet::blockLRW |
if >0 block use of LRW in processdata
| uint8 ec_slavet::CoEdetails |
CoE details
| uint16 ec_slavet::configadr |
Configured address
| uint16 ec_slavet::configindex |
link to config table
| uint8 ec_slavet::consumedports |
consumed ports bitmap : ....3210, used for internal delay measurement
| uint8 ec_slavet::DCactive |
DC sync activation, 0=off, 1=on
| int32 ec_slavet::DCcycle |
DC cyle time in ns
| uint16 ec_slavet::DCnext |
next DC slave
| uint16 ec_slavet::DCprevious |
previous DC slave
| int32 ec_slavet::DCrtA |
DC receivetimes on port A
| int32 ec_slavet::DCrtB |
DC receivetimes on port B
| int32 ec_slavet::DCrtC |
DC receivetimes on port C
| int32 ec_slavet::DCrtD |
DC receivetimes on port D
| int32 ec_slavet::DCshift |
DC shift from clock modulus boundary
| uint16 ec_slavet::Dtype |
Device type
| int16 ec_slavet::Ebuscurrent |
E-bus current
| uint8 ec_slavet::eep_8byte |
1 = 8 bytes per read, 0 = 4 bytes per read
| uint32 ec_slavet::eep_id |
ID from EEprom
| uint32 ec_slavet::eep_man |
Manufacturer from EEprom
| uint8 ec_slavet::eep_pdi |
0 = eeprom to master , 1 = eeprom to PDI
| uint32 ec_slavet::eep_rev |
revision from EEprom
| uint8 ec_slavet::entryport |
port number on this slave the parent is connected to
| uint8 ec_slavet::EoEdetails |
EoE details
| ec_fmmut ec_slavet::FMMU[EC_MAXFMMU] |
FMMU structure
| uint8 ec_slavet::FMMU0func |
FMMU0 function
| uint8 ec_slavet::FMMU1func |
FMMU1 function
| uint8 ec_slavet::FMMU2func |
FMMU2 function
| uint8 ec_slavet::FMMU3func |
FMMU3 function
| uint8 ec_slavet::FMMUunused |
first unused FMMU
| uint8 ec_slavet::FoEdetails |
FoE details
| uint8 ec_slavet::group |
group
| boolean ec_slavet::hasdc |
has DC capabillity
| uint16 ec_slavet::Ibits |
input bits
| uint32 ec_slavet::Ibytes |
input bytes, if Ibits < 8 then Ibytes = 0
| uint8* ec_slavet::inputs |
input pointer in IOmap buffer
| boolean ec_slavet::islost |
TRUE is slave is not responding at all
| uint8 ec_slavet::Istartbit |
startbit in first input byte
| uint16 ec_slavet::Itype |
Interface type
| uint8 ec_slavet::mbx_cnt |
Counter value of mailbox link layer protocol 1..7
| uint16 ec_slavet::mbx_l |
length of write mailbox in bytes, if no mailbox then 0
| uint16 ec_slavet::mbx_proto |
mailbox supported protocols
| uint16 ec_slavet::mbx_rl |
length of read mailbox in bytes
| uint16 ec_slavet::mbx_ro |
mailbox read offset
| uint16 ec_slavet::mbx_wo |
mailbox write offset
| char ec_slavet::name[EC_MAXNAME+1] |
readable name
| uint16 ec_slavet::Obits |
output bits
| uint32 ec_slavet::Obytes |
output bytes, if Obits < 8 then Obytes = 0
| uint8 ec_slavet::Ostartbit |
startbit in first output byte
| uint8* ec_slavet::outputs |
output pointer in IOmap buffer
| uint16 ec_slavet::parent |
slave number for parent, 0=master
| uint8 ec_slavet::parentport |
port number on parent this slave is connected to
| int32 ec_slavet::pdelay |
propagation delay
| int(* ec_slavet::PO2SOconfig)(uint16 slave) |
registered configuration function PO->SO
| uint8 ec_slavet::ptype |
Physical type; Ebus, EtherNet combinations
| uint16 ec_slavet::SIIindex |
link to SII config
| ec_smt ec_slavet::SM[EC_MAXSM] |
SM structure
| uint8 ec_slavet::SMtype[EC_MAXSM] |
SM type 0=unused 1=MbxWr 2=MbxRd 3=Outputs 4=Inputs
| uint8 ec_slavet::SoEdetails |
SoE details
| uint16 ec_slavet::state |
state of slave
| uint8 ec_slavet::topology |
topology: 1 to 3 links
1.7.4