The paravirtualized PAPR platform sometimes needs to restrict the guest to
using only some of the page sizes actually supported by the host's MMU.
At the moment this is handled in KVM specific code, but for consistency we
want to apply the same limitations to all accelerators.
This makes a start on this by providing a helper function in the cpu code
to allow platform code to remove some of the cpu's page size definitions
via a caller supplied callback.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
The way we used to handle KVM allowable guest pagesizes for PAPR guests
required some convoluted checking of memory attached to the guest.
The allowable pagesizes advertised to the guest cpus depended on the memory
which was attached at boot, but then we needed to ensure that any memory
later hotplugged didn't change which pagesizes were allowed.
Now that we have an explicit machine option to control the allowable
maximum pagesize we can simplify this. We just check all memory backends
against that declared pagesize. We check base and cold-plugged memory at
reset time, and hotplugged memory at pre_plug() time.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
According to PPC440 User Manual PPC440 has multiple opcodes for icbt
instruction: one for compatibility with older cores and two 440
specific opcodes one of which is defined in BookE. QEMU only
implements two of these, add the missing one.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix the helper_fpscr_clrbit() function so it correctly sets the FEX
and VX bits.
Determining the value for the Floating Point Status and Control
Register's (FPSCR) FEX bit is suppose to be done like this:
FEX = (VX & VE) | (OX & OE) | (UX & UE) | (ZX & ZE) | (XX & XE))
It is described as "the logical OR of all the floating-point exception
bits masked by their respective enable bits". It was not implemented
correctly. The value of FEX would stay on even when all other bits
were set to off.
The VX bit is described as "the logical OR of all of the invalid
operation exceptions". This bit was also not implemented correctly. It
too would stay on when all the other bits were set to off.
My main source of information is an IBM document called:
PowerPC Microprocessor Family:
The Programming Environments for 32-Bit Microprocessors
Page 62 is where the FPSCR information is located.
This is an older copy than the one I use but it is still very useful:
https://www.pdfdrive.net/powerpc-microprocessor-family-the-programming-environments-for-32-e3087633.html
I use a G3 and G5 iMac to compare bit values with QEMU. This patch
fixed all the problems I was having with these bits.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
[dwg: Re-wrapped commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
KVM HV has a restriction that for HPT mode guests, guest pages must be hpa
contiguous as well as gpa contiguous. We have to account for that in
various places. We determine whether we're subject to this restriction
from the SMMU information exposed by KVM.
Planned cleanups to the way we handle this will require knowing whether
this restriction is in play in wider parts of the code. So, expose a
helper function which returns it.
This does mean some redundant calls to kvm_get_smmu_info(), but they'll go
away again with future cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
ppc_check_compat() is used in a number of places to check if a cpu object
supports a certain compatiblity mode, subject to various constraints.
It takes a PowerPCCPU *, however it really only depends on the cpu's class.
We have upcoming cases where it would be useful to make compatibility
checks before we fully instantiate the cpu objects.
ppc_type_check_compat() will now make an equivalent check, but based on a
CPU's QOM typename instead of an instantiated CPU object.
We make use of the new interface in several places in spapr, where we're
essentially making a global check, rather than one specific to a particular
cpu. This avoids some ugly uses of first_cpu to grab a "representative"
instance.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
-----BEGIN PGP SIGNATURE-----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=hMax
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20180619' into staging
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
# gpg: Signature made Tue 19 Jun 2018 10:33:06 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180619:
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
s390x/cpumodels: add z14 Model ZR1
s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW
vfio-ccw: remove orb.c64 (64 bit data addresses) check
vfio-ccw: add force unlimited prefetch property
virtio-ccw: clean up notify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce the new z14 Model ZR1 cpu model. Mostly identical to z14, only
the cpu type differs (3906 vs. 3907)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180613081819.147178-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This patch adds gen_io_start()/gen_io_end() to various instructions as required
in order to boot my OpenBIOS test images on qemu-system-sparc64 with icount
enabled.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CPUPPCState currently contains a number of fields containing the state of
the VPA. The VPA is a PAPR specific concept covering several guest/host
shared memory areas used to communicate some information with the
hypervisor.
As a PAPR concept this is really machine specific information, although it
is per-cpu, so it doesn't really belong in the core CPU state structure.
There's also other information that's per-cpu, but platform/machine
specific. So create a (void *)machine_data in PowerPCCPU which can be
used by the machine to locate per-cpu data. Intialization, lifetime and
cleanup of machine_data is entirely up to the machine type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Commit 9d6f106552 moved the last line in this block to somewhere else,
but it forgot to remove the now useless #if/#endif.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For cap_ppc_safe_cache to be set to workaround, we require both a l1d
cache flush instruction and private l1d cache.
On POWER8 don't require private l1d cache. This means a guest on a
POWER8 machine can make use of the cache flush workarounds.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ARMv6-M supports 6 Thumb2 instructions. This patch checks for these
instructions and allows their execution.
Like Thumb2 cores, ARMv6-M always interprets BL instruction as 32-bit.
This patch is required for future Cortex-M0 support.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20180612204632.28780-1-jusual@mail.ru
[PMM: move armv6m_insn[] and armv6m_mask[] closer to
point of use, and mark 'const'. Check for M-and-not-v7
rather than M-and-6.]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-16-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rearrange the arithmetic so that we are agnostic about the total size
of the vector and the size of the element. This will allow us to index
up to the 32nd byte and with 16-byte elements.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180613015641.5667-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Cortex-M CPU and its NVIC are two intimately intertwined parts of
the same hardware; it is not possible to use one without the other.
Unfortunately a lot of our board models don't do any sanity checking
on the CPU type the user asks for, so a command line like
qemu-system-arm -M versatilepb -cpu cortex-m3
will create an M3 without an NVIC, and coredump immediately.
In the other direction, trying a non-M-profile CPU in an M-profile
board won't blow up, but doesn't do anything useful either:
qemu-system-arm -M lm3s6965evb -cpu arm926
Add some checking in the NVIC and CPU realize functions that the
user isn't trying to use an NVIC without an M-profile CPU or
an M-profile CPU without an NVIC, so we can produce a helpful
error message rather than a core dump.
Fixes: https://bugs.launchpad.net/qemu/+bug/1766896
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180601160355.15393-1-peter.maydell@linaro.org
Remove the abort on a sequence of NOP/zero instructions.
Always return early and avoid decoding NOP/zero instructions.
This fixes Coverity CID 1391443.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Correct the masking of output addresses.
This fixes Coverity CID 1391441.
Fixes: commit 3924a9aa02
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Here's another batch of ppc patches towards the 3.0 release. There's
a fair bit here, because I've been working through my mail backlog
after a holiday. There's not much of a central theme, amongst other
things we have:
* ppc440 / sam460ex improvements
* logging and error cleanups
* 40p (PReP) bugfixes
* Macintosh fixes and cleanups
* Add emulation of the new POWER9 store-forwarding barrier
instruction variant
* Hotplug cleanups
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAlsfa4kACgkQbDjKyiDZ
s5IdhxAA1ZDgEMyQkMPlnjYBNSpw9ICo/v+Lj1ZvlVjIbtjP6ZWdmaNHbBLi1N/U
jbY7Yb+a43xj96WigN2kxu16aL7AvgrGayscht+P+ZXGWaEAt0R1EhiqhheKjkOH
n0gAxe5c9wN18tJ7ZMtq7HmWw/MyWVjPQ4Pr38npyDU037LG4xY55DigcFu9D/6N
rSYtB3gWIEvbGhx2Sm+gzbkleKufUNhSJMJI9diRS2KvyocH8ENQUqcMqK//Y6w7
/Lk/j+qcAOAfCS+QWH9/XQvYdOGR9Gaw4oWLViOCD+EpTJHAYFMzVsp5ZLZZByw/
S51W3e9mfxzgtIjoDxaetrW95yx2bAcFekP+H8KQesWpydSprsnAlh3SE3dfO2Jp
Z1yVPHZv2fYZQjNZ0t62Z248iJ4YiBDttDpQYzsiGTiGVfx1IKTNz+gfNwV78CCJ
SkyIktky2TYAemAB+U90JL3gYSn0GHwgBFLTJ4Rrrf3kC0wNslgosGTEB9v3D+Mb
zsWxaBftFwZsRnNggBtE2/35zccJ2YURASlDu9ccmczyCUrRZbKE57/GftRXdIcY
Oqjf48/NSwBm98bIEQGTOw7H1NgWuTazAc2+VS4mAHtUEEYIunuRmC+eTKNM01Yu
qSMCg6tPADEXwRg6z062sb6T0vvpicv+X1U++tbHNqV3gprOlts=
=g3bP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.0-20180612' into staging
ppc patch queue 2018-06-12
Here's another batch of ppc patches towards the 3.0 release. There's
a fair bit here, because I've been working through my mail backlog
after a holiday. There's not much of a central theme, amongst other
things we have:
* ppc440 / sam460ex improvements
* logging and error cleanups
* 40p (PReP) bugfixes
* Macintosh fixes and cleanups
* Add emulation of the new POWER9 store-forwarding barrier
instruction variant
* Hotplug cleanups
# gpg: Signature made Tue 12 Jun 2018 07:43:21 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.0-20180612: (33 commits)
spapr_pci: Remove unhelpful pagesize warning
xics_kvm: use KVM helpers
ppc/pnv: fix LPC HC firmware address space
spapr: handle cpu core unplug via hotplug handler chain
spapr: handle pc-dimm unplug via hotplug handler chain
spapr: introduce machine unplug handler
spapr: move memory hotplug support check into spapr_memory_pre_plug()
spapr: move lookup of the node into spapr_memory_plug()
spapr: no need to verify the node
target/ppc: Allow PIR read in privileged mode
ppc4xx_i2c: Clean up and improve error logging
target/ppc: extend eieio for POWER9
mos6522: convert VMSTATE_TIMER_PTR_TEST to VMSTATE_TIMER_PTR
mos6522: move timer frequency initialisation to mos6522_reset
cuda: embed mos6522_cuda device directly rather than using QOM object link
mos6522: fix vmstate_mos6522_timer version in vmstate_mos6522
ppc: add missing FW_CFG_PPC_NVRAM_FLAT definition
ppc: remove obsolete macio_init() definition from mac.h
ppc: remove obsolete pci_pmac_init() definitions from mac.h
hw/misc/mos6522: Add trailing '\n' to qemu_log() calls
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A link property can be set during creation, with
object_property_add_link() and later with object_property_set_link().
add_link() doesn't add a reference to the target object, while
set_link() does.
Furthemore, OBJ_PROP_LINK_UNREF_ON_RELEASE flags, set during add_link,
says whether a reference must be released when the property is destroyed.
This can lead to leaks if the property was later set_link(), as the
added reference is never released.
Instead, rename OBJ_PROP_LINK_UNREF_ON_RELEASE to OBJ_PROP_LINK_STRONG
and use that has an indication on how the link handle reference
management in set_link().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180531195119.22021-3-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to PowerISA, the PIR register should be readable in privileged
mode also, not only in hypervisor privileged mode.
PowerISA 3.0 - 4.3.3 Processor Identification Register
"Read access to the PIR is privileged; write access is not provided."
Figure 18 in section 4.4.4 explicitly confirms that mfspr PIR is privileged
and doesn't require hypervisor state.
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Alexander Graf <agraf@suse.de>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Leandro Lupori <leandro.lupori@gmail.com>
Reviewed-by: Jose Ricardo Ziviani <joserz@linux.ibm.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 introduced a new variant of the eieio instruction using bit 6
as a hint to tell the CPU it is a store-forwarding barrier.
The usage of this eieio extension was recently added in Linux 4.17
which activated the "support for a store forwarding barrier at kernel
entry/exit".
Unfortunately, it is not possible to insert this new eieio instruction
without considerable change in ppc_tr_translate_insn(). So instead we
loosen the QEMU eieio instruction mask and modify the gen_eieio()
helper to test for bit6. On non-POWER9 CPUs, the bit6 is just ignored
but a warning is emitted as this is not an instruction software should
be using.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The powerpc Linux kernel[1] and skiboot firmware[2] recently gained changes
that cause the Processor Compatibility Register (PCR) SPR to be cleared.
These changes cause Linux to fail to boot on the Qemu powernv machine
with an error:
Trying to write privileged spr 338 (0x152) at 0000000030017f0c
With this patch Qemu makes this register available as a hypervisor
privileged register.
Note that bits set in this register disable features of the processor.
Currently the only register state that is supported is when the register
is zeroed (enable all features). This is sufficient for guests to
once again boot.
[1] https://lkml.kernel.org/r/20180518013742.24095-1-mikey@neuling.org
[2] https://patchwork.ozlabs.org/patch/915932/
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Factor out the parsing of struct kvm_ppc_cpu_char in
kvmppc_get_cpu_characteristics() into a separate function for each cap
for simplicity.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
fprintf() and qemu_log_separate() are frowned upon these days for printing
logging information in QEMU. Accessing the wrong SPRs indicates wrong guest
behaviour in most cases, and we've got a proper way to log such situations,
which is the qemu_log_mask(LOG_GUEST_ERROR, ...) function. So use this
function now for logging the bad SPR accesses instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than limit total TB size to PAGE-32 bytes, end the TB when
near the end of a page. This should provide proper semantics of
SIGSEGV when executing near the end of a page.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-9-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Removed ctx->insn_pc in favour of ctx->base.pc_next.
Yes, it is annoying, but didn't want to waste its 4 bytes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The name gen_lookup_tb is at odds with tcg_gen_lookup_and_goto_tb.
For these cases, we do indeed want to exit back to the main loop.
Similarly, DISAS_UPDATE performs no actual update, whereas DISAS_EXIT
does what it says.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180512050250.12774-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>