According to TLFS, Hyper-V guest is supposed to check
HV_HYPERCALL_AVAILABLE privilege bit before accessing
HV_X64_MSR_GUEST_OS_ID/HV_X64_MSR_HYPERCALL MSRs but at least some
Windows versions ignore that. As KVM is very permissive and allows
accessing these MSRs unconditionally, no issue is observed. We may,
however, want to tighten the checks eventually. Conforming to the
spec is probably also a good idea.
Enable HV_HYPERCALL_AVAILABLE bit unconditionally.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-8-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hv_cpuid_check_and_set() does too much:
- Checks if the feature is supported by KVM;
- Checks if all dependencies are enabled;
- Sets the feature bit in cpu->hyperv_features for 'passthrough' mode.
To reduce the complexity, move all the logic except for dependencies
check out of it. Also, in 'passthrough' mode we don't really need to
check dependencies because KVM is supposed to provide a consistent
set anyway.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-7-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
To make Hyper-V features appear in e.g. QMP query-cpu-model-expansion we
need to expand and set the corresponding CPUID leaves early. Modify
x86_cpu_get_supported_feature_word() to call newly intoduced Hyper-V
specific kvm_hv_get_supported_cpuid() instead of
kvm_arch_get_supported_cpuid(). We can't use kvm_arch_get_supported_cpuid()
as Hyper-V specific CPUID leaves intersect with KVM's.
Note, early expansion will only happen when KVM supports system wide
KVM_GET_SUPPORTED_HV_CPUID ioctl (KVM_CAP_SYS_HYPERV_CPUID).
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210608120817.1325125-6-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, the only eVMCS version, supported by KVM (and described in TLFS)
is '1'. When Enlightened VMCS feature is enabled, QEMU takes the supported
eVMCS version range (from KVM_CAP_HYPERV_ENLIGHTENED_VMCS enablement) and
puts it to guest visible CPUIDs. When (and if) eVMCS ver.2 appears a
problem on migration is expected: it doesn't seem to be possible to migrate
from a host supporting eVMCS ver.2 to a host, which only support eVMCS
ver.1.
Hardcode eVMCS ver.1 as the result of 'hv-evmcs' enablement for now. Newer
eVMCS versions will have to have their own enablement options (e.g.
'hv-evmcs=2').
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210608120817.1325125-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The loop is performing a simple boolean test for the existence
of a BP_CPU breakpoint at EIP. Plus it gets the iteration wrong,
if we happen to have a BP_GDB breakpoint at the same address.
We have a function for this: cpu_breakpoint_test.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210620062317.1399034-1-richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use raise_exception_ra (without error code) when raising the illegal
opcode operation; raise #GP when setting bits 63:32 of DR6 or DR7.
Move helper_get_dr to sysemu/ since it is a privileged instruction
that is not needed on user-mode emulators.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DR6[63:32] and DR7[63:32] are reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-3-laramglazier@gmail.com>
[Ignore for 32-bit builds. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The address of the last entry in the MSRPM and
in the IOPM must be smaller than the largest physical address.
(APM2 15.10-15.11)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210705081802.18960-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Given that TCG is now the only consumer of X86XSaveArea, move the
structure definition and associated offset declarations and checks to a
TCG specific header.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-9-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than relying on the X86XSaveArea structure definition,
determine the offset of XSAVE state areas using CPUID leaf 0xd where
possible (KVM and HVF).
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-8-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than relying on the X86XSaveArea structure definition directly,
the routines that manipulate the XSAVE state area should observe the
offsets declared in the x86_ext_save_areas array.
Currently the offsets declared in the array are derived from the
structure definition, resulting in no functional change.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-7-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide visibility of the x86_ext_save_areas array and associated type
outside of cpu.c.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-6-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for removing assumptions about XSAVE area offsets, pass
a buffer pointer and buffer length to the XSAVE helper functions.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-5-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the hard-coded size of offsets or structure elements with
defined constants or sizeof().
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rather than having similar but different checks in cpu.h and kvm.c,
move them all to cpu.h.
Message-Id: <20210705104632.2902400-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Declare and use manifest constants for the XSAVE state component
offsets.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a break instead of an ifdefed else.
There's no need to move the values through s->T0.
Remove TCG_BSWAP_IZ and the preceding zero-extension.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Linux 5.14 will add support for nested TSC scaling. Add the
corresponding feature in QEMU; to keep support for existing kernels,
do not add it to any processor yet.
The handling of the VMCS enumeration MSR is ugly; once we have more than
one case, we may want to add a table to check VMX features against.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEWjIv1avE09usz9GqKAeTb5hNxaYFAmDM+T4UHGVoYWJrb3N0
QHJlZGhhdC5jb20ACgkQKAeTb5hNxabUrQ/+PtiJjd1cW9nhA0kWu8dVGq3xXJb4
Nbma86tRPKBauTeQCLccXEvUjLqgFejeQlArhq4QKErLisXu4TDuQ+GeAfdR7h5P
MTMSo0C665cT2/NbrwQizSPQdrNEgZAYRaDRafZLQTJ1TStzWDB1Vg79rzpWPcn0
76XjIfSdGZUa4B1OvjNvUFq/SXf+0hW75soCwRhDNh5tfzfyct0XCSRF/wTXqyR/
7yxDtfTzUAvT+6l3qb8ky+wqUTIY58BgjbdIGhyAUr5/N8y5YystF41TUVoy772k
pmCXHniMmgmhH7HVwGujtc6mPe5y1VFJVaA08Pzb7KwSfdO9F/3Gk3DHpKW8/whi
tCGluBqz0qlyhsnP9wDRJb6BzCBl2hVqu50DL+uSNsJOSIW60LLMJV4ANlDYdDM3
s33S5NrM0DsRAjrtczPdvKPWwaVE4NB2bYX1I3yYGgflwzQYOjBmswM/UgymhlZk
5dxtF9CX2p+Vre6UoLDKum1DJDCcWjHouJAAqZzxxEko56yWgTUSzTcK4GVOlsAc
qX4gJbFpOzDlSdpDTG/fcnQlCnwc1jxCzsB8Wy2KJiBif3Sa3Wh1s00Cp7oGNQt+
P/z2Fp1agl8u83bbvlIjZnsv0O2g5Ks4r5tBhXmqI36aiU26F/x39SUfp7/7OAUd
CQBGBGXqpnOmUcE=
=YWGX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost-gl/tags/x86-next-pull-request' into staging
x86 queue, 2021-06-18
Features:
* Add ratelimit for bus locks acquired in guest (Chenyi Qiang)
Documentation:
* SEV documentation updates (Tom Lendacky)
* Add a table showing x86-64 ABI compatibility levels (Daniel P. Berrangé)
Automated changes:
* Update Linux headers to 5.13-rc4 (Eduardo Habkost)
# gpg: Signature made Fri 18 Jun 2021 20:51:26 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost-gl/tags/x86-next-pull-request:
scripts: helper to generate x86_64 CPU ABI compat info
docs: add a table showing x86-64 ABI compatibility levels
docs/interop/firmware.json: Add SEV-ES support
docs: Add SEV-ES documentation to amd-memory-encryption.txt
doc: Fix some mistakes in the SEV documentation
i386: Add ratelimit for bus locks acquired in guest
Update Linux headers to 5.13-rc4
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly be interested in distinguishing pointers
from integers in the helper's declaration, as well as a
true void return. We currently have two parallel 1 bit
fields; merge them and expand to a 3 bit field.
Our current maximum is 7 helper arguments, plus the return
makes 8 * 3 = 24 bits used within the uint32_t typemask.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A bus lock is acquired through either split locked access to writeback
(WB) memory or any locked access to non-WB memory. It is typically >1000
cycles slower than an atomic operation within a cache and can also
disrupts performance on other cores.
Virtual Machines can exploit bus locks to degrade the performance of
system. To address this kind of performance DOS attack coming from the
VMs, bus lock VM exit is introduced in KVM and it can report the bus
locks detected in guest. If enabled in KVM, it would exit to the
userspace to let the user enforce throttling policies once bus locks
acquired in VMs.
The availability of bus lock VM exit can be detected through the
KVM_CAP_X86_BUS_LOCK_EXIT. The returned bitmap contains the potential
policies supported by KVM. The field KVM_BUS_LOCK_DETECTION_EXIT in
bitmap is the only supported strategy at present. It indicates that KVM
will exit to userspace to handle the bus locks.
This patch adds a ratelimit on the bus locks acquired in guest as a
mitigation policy.
Introduce a new field "bus_lock_ratelimit" to record the limited speed
of bus locks in the target VM. The user can specify it through the
"bus-lock-ratelimit" as a machine property. In current implementation,
the default value of the speed is 0 per second, which means no
restrictions on the bus locks.
As for ratelimit on detected bus locks, simply set the ratelimit
interval to 1s and restrict the quota of bus lock occurence to the value
of "bus_lock_ratelimit". A potential alternative is to introduce the
time slice as a property which can help the user achieve more precise
control.
The detail of bus lock VM exit can be found in spec:
https://software.intel.com/content/www/us/en/develop/download/intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210521043820.29678-1-chenyi.qiang@intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When the selective CR0 write intercept is set, all writes to bits in
CR0 other than CR0.TS or CR0.MP cause a VMEXIT.
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-5-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The combination of unset CD and set NW bit in CR0 is illegal.
CR0[63:32] are also reserved and need to be zero.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-4-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zero VMRUN intercept and ASID should cause an immediate VMEXIT
during the consistency checks performed by VMRUN.
(AMD64 Architecture Programmer's Manual, V2, 15.5)
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-3-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added cpu_svm_has_intercept to reduce duplication when checking the
corresponding intercept bit outside of cpu_svm_check_intercept_param
Signed-off-by: Lara Lazier <laramglazier@gmail.com>
Message-Id: <20210616123907.17765-2-laramglazier@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes host and max cpu initialization, by running the accel cpu
initialization only after all instance init functions are called for all
X86 cpu subclasses.
The bug this is fixing is related to the "max" and "host" i386 cpu
subclasses, which set cpu->max_features, which is then used at cpu
realization time.
In order to properly split the accel-specific max features code that
needs to be executed at cpu instance initialization time,
we cannot call the accel cpu initialization at the end of the x86 base
class initialization, or we will have no way to specialize
"max features" cpu behavior, overriding the "max" cpu class defaults,
and checking for the "max features" flag itself.
This patch moves the accel-specific cpu instance initialization to after
all x86 cpu instance code has been executed, including subclasses,
so that proper initialization of cpu "host" and "max" can be restored.
Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c,"...)
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210603123001.17843-3-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
i386 realizefn code is sensitive to ordering, and recent commits
aimed at refactoring it, splitting accelerator-specific code,
broke assumptions which need to be fixed.
We need to:
* process hyper-v enlightements first, as they assume features
not to be expanded
* only then, expand features
* after expanding features, attempt to check them and modify them in the
accel-specific realizefn code called by cpu_exec_realizefn().
* after the framework has been called via cpu_exec_realizefn,
the code can check for what has or hasn't been set by accel-specific
code, or extend its results, ie:
- check and evenually set code_urev default
- modify cpu->mwait after potentially being set from host CPUID.
- finally check for phys_bits assuming all user and accel-specific
adjustments have already been taken into account.
Fixes: f5cc5a5c ("i386: split cpu accelerators from cpu.c"...)
Fixes: 30565f10 ("cpu: call AccelCPUClass::cpu_realizefn in"...)
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210603123001.17843-2-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent cleanup did not recognize that there are two ways
to encode cr8: one via the LOCK and the other via REX.
Fixes: 7eff2e7c
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/380
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210602035511.96834-1-richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The format of the task state segment is governed by bit 3 in the
descriptor type field. On a task switch, the format for saving
is given by the current value of TR's type field, while the
format for loading is given by the new descriptor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the manual, the high 16-bit of the registers are preserved
when switching to a 16-bit task. Implement this in switch_tss_ra.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TSS offsets in the manuals have only 2-byte slots for the
segment registers. QEMU incorrectly uses 4-byte slots, so
that SS overlaps the LDT selector.
Resolves: #382
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use an enumeration instead of raw 32/64/80 values.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hooks we have that call us after reset, init and loadvm really all
just want to say "The reference of all register state is in the QEMU
vcpu struct, please push it".
We already have a working pushing mechanism though called cpu->vcpu_dirty,
so we can just reuse that for all of the above, syncing state properly the
next time we actually execute a vCPU.
This fixes PSCI resets on ARM, as they modify CPU state even after the
post init call has completed, but before we execute the vCPU again.
To also make the scheme work for x86, we have to make sure we don't
move stale eflags into our env when the vcpu state is dirty.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-13-agraf@csgraf.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will need more than a single field for hvf going forward. To keep
the global vcpu struct uncluttered, let's allocate a special hvf vcpu
struct, similar to how hax does it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Tested-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-12-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can move the definition of hvf_vcpu_exec() into our internal
hvf header, obsoleting the need for hvf-accel-ops.h.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-11-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is no reason to call the hvf specific hvf_cpu_synchronize_state()
when we can just use the generic cpu_synchronize_state() instead. This
allows us to have less dependency on internal function definitions and
allows us to make hvf_cpu_synchronize_state() static.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-9-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch splits the vcpu init and destroy functions into a generic and
an architecture specific portion. This also allows us to move the generic
functions into the generic hvf code, removing exported functions.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-8-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves a few internal struct and constant defines over.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-5-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves CPU and memory operations over. While at it, make sure
the code is consumable on non-i386 systems.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-4-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves the vCPU thread loop over.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-3-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Until now, Hypervisor.framework has only been available on x86_64 systems.
With Apple Silicon shipping now, it extends its reach to aarch64. To
prepare for support for multiple architectures, let's start moving common
code out into its own accel directory.
This patch moves assert_hvf_ok() and introduces generic build infrastructure.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20210519202253.76782-2-agraf@csgraf.de
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Bump minimum versions of some requirements after removing CentOS 7 support
-----BEGIN PGP SIGNATURE-----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=RAkI
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/thuth-gitlab/tags/pull-request-2021-06-02' into staging
* Update the references to some doc files (use *.rst instead of *.txt)
* Bump minimum versions of some requirements after removing CentOS 7 support
# gpg: Signature made Wed 02 Jun 2021 08:12:18 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/thuth-gitlab/tags/pull-request-2021-06-02:
configure: bump min required CLang to 6.0 / XCode 10.0
configure: bump min required GCC to 7.5.0
configure: bump min required glib version to 2.56
tests/docker: drop CentOS 7 container
tests/vm: convert centos VM recipe to CentOS 8
crypto: drop used conditional check
crypto: bump min gnutls to 3.5.18, dropping RHEL-7 support
crypto: bump min gcrypt to 1.8.0, dropping RHEL-7 support
crypto: drop back compatibility typedefs for nettle
crypto: bump min nettle to 3.4, dropping RHEL-7 support
patchew: move quick build job from CentOS 7 to CentOS 8 container
block/ssh: Bump minimum libssh version to 0.8.7
docs: fix references to docs/devel/s390-dasd-ipl.rst
docs: fix references to docs/specs/tpm.rst
docs: fix references to docs/devel/build-system.rst
docs: fix references to docs/devel/atomics.rst
docs: fix references to docs/devel/tracing.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The SEV userspace header[1] exports a couple of other error conditions that
aren't listed in QEMU's SEV implementation, so let's just round out the
list.
[1] linux-headers/linux/psp-sev.h
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210430134830.254741-3-ckuehl@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
This can help lower any margin for error when making future additions to
the list, especially if they're made out of order.
While doing so, make capitalization of ASID consistent with its usage in
the SEV firmware spec (Asid -> ASID).
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210430134830.254741-2-ckuehl@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The SEV FW >= 0.23 added a new command that can be used to query the
attestation report containing the SHA-256 digest of the guest memory
and VMSA encrypted with the LAUNCH_UPDATE and sign it with the PEK.
Note, we already have a command (LAUNCH_MEASURE) that can be used to
query the SHA-256 digest of the guest memory encrypted through the
LAUNCH_UPDATE. The main difference between previous and this command
is that the report is signed with the PEK and unlike the LAUNCH_MEASURE
command the ATTESATION_REPORT command can be called while the guest
is running.
Add a QMP interface "query-sev-attestation-report" that can be used
to get the report encoded in base64.
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Tom Lendacky <Thomas.Lendacky@amd.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Reviewed-by: James Bottomley <jejb@linux.ibm.com>
Tested-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210429170728.24322-1-brijesh.singh@amd.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There is no need to use vCPU-specific kvm state in hyperv_enabled() check
and we need to do that when feature expansion happens early, before vCPU
specific KVM state is created.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-15-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
KVM_GET_SUPPORTED_HV_CPUID was made a system wide ioctl which can be called
prior to creating vCPUs and we are going to use that to expand Hyper-V cpu
features early. Use it when it is supported by KVM.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-14-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
SYNDBG leaves were recently (Linux-5.8) added to KVM but we haven't
updated the expected size of KVM_GET_SUPPORTED_HV_CPUID output in
KVM so we now make serveral tries before succeeding. Update the
default.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-13-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hyperv_expand_features() will be called before we create vCPU so
evmcs enablement should go away. hyperv_init_vcpu() looks like the
right place.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-11-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The intention is to call hyperv_expand_features() early, before vCPUs
are created and use the acquired data later when we set guest visible
CPUID data.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-10-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Just like with cpuid_cache, it makes no sense to call
KVM_GET_SUPPORTED_HV_CPUID more than once and instead of (ab)using
env->features[] and/or trying to keep all the code in one place, it is
better to introduce persistent hv_cpuid_cache and hv_cpuid_get_host()
accessor to it.
Note, hv_cpuid_get_fw() is converted to using hv_cpuid_get_host()
just to be removed later with Hyper-V specific feature words.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-9-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Hyper-V feature leaves are weird. We have some of them in
feature_word_info[] array but we don't use feature_word_info
magic to enable them. Neither do we use feature_dependencies[]
mechanism to validate the configuration as it doesn't allign
well with Hyper-V's many-to-many dependency chains. Some of
the feature leaves hold not only feature bits, but also values.
E.g. FEAT_HV_NESTED_EAX contains both features and the supported
Enlightened VMCS range.
Hyper-V features are already represented in 'struct X86CPU' with
uint64_t hyperv_features so duplicating them in env->features adds
little (or zero) benefits. THe other half of Hyper-V emulation features
is also stored with values in hyperv_vendor_id[], hyperv_limits[],...
so env->features[] is already incomplete.
Remove Hyper-V feature leaves from env->features[] completely.
kvm_hyperv_properties[] is converted to using raw CPUID func/reg
pairs for features, this allows us to get rid of hv_cpuid_get_fw()
conversion.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-8-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
As a preparatory patch to dropping Hyper-V CPUID leaves from
feature_word_info[] stop using env->features[] as a temporary
storage of Hyper-V CPUIDs, just build Hyper-V CPUID leaves directly
from kvm_hyperv_properties[] data.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-5-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We have all the required data in X86CPU already and as we are about to
split hyperv_handle_properties() into hyperv_expand_features()/
hyperv_fill_cpuids() we can remove the blind copy. The functional change
is that QEMU won't pass CPUID leaves it doesn't currently know about
to the guest but arguably this is a good change.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-4-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
There is no need to have this special case: like all other Hyper-V
enlightenments we can just use kernel's supplied value in hv_passthrough
mode.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-3-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
When cpu->hyperv_vendor is not set manually we default to "Microsoft Hv"
and in 'hv_passthrough' mode we get the information from the host. This
information is stored in cpu->hyperv_vendor_id[] array but we don't update
cpu->hyperv_vendor string so e.g. QMP's query-cpu-model-expansion output
is incorrect.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210422161130.652779-2-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'max' CPU under TCG currently reports a family/model/stepping that
approximately corresponds to an AMD K7 vintage architecture.
The K7 series predates the introduction of 64-bit support by AMD
in the K8 series. This has been reported to lead to LLVM complaints
about generating 64-bit code for a 32-bit CPU target
LLVM ERROR: 64-bit code requested on a subtarget that doesn't support it!
It appears LLVM looks at the family/model/stepping, despite qemu64
reporting it is 64-bit capable.
This patch changes 'max' to report a CPUID with the family, model
and stepping taken from a
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
which is one of the first 64-bit AMD CPUs.
Closes https://gitlab.com/qemu-project/qemu/-/issues/191
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210507133650.645526-3-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
The 'qemu64' CPUID currently reports a family/model/stepping that
approximately corresponds to an AMD K7 vintage architecture.
The K7 series predates the introduction of 64-bit support by AMD
in the K8 series. This has been reported to lead to LLVM complaints
about generating 64-bit code for a 32-bit CPU target
LLVM ERROR: 64-bit code requested on a subtarget that doesn't support it!
It appears LLVM looks at the family/model/stepping, despite qemu64
reporting it is 64-bit capable.
This patch changes 'qemu64' to report a CPUID with the family, model
and stepping taken from a
AMD Athlon(tm) 64 X2 Dual Core Processor 4000+
which is one of the first 64-bit AMD CPUs.
Closes https://gitlab.com/qemu-project/qemu/-/issues/191
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210507133650.645526-2-berrange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Since commit fa4518741e (target-i386: Rename struct XMMReg to ZMMReg),
CPUX86State.xmm_regs[] has already been extended to 512bit to support
AVX512.
Also, other qemu level supports for AVX512 registers are there for
years.
But in x86_cpu_dump_state(), still only dump XMM registers no matter
YMM/ZMM is enabled.
This patch is to complement this, let it dump XMM/YMM/ZMM accordingly.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1618986232-73826-1-git-send-email-robert.hu@linux.intel.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
It's very easy to mistakenly extend kvm_default_props to include
features that require a kernel version that's too recent. Add a
comment warning about that, pointing to the documentation file
where the minimum kernel version for KVM is documented.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200925211021.4158567-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Hyper-V 2016 refuses to boot on Skylake+ CPU models because they lack
'xsaves'/'vmx-xsaves' features and this diverges from real hardware. The
same issue emerges with AMD "EPYC" CPU model prior to version 3 which got
'xsaves' added. EPYC-Rome/EPYC-Milan CPU models have 'xsaves' enabled from
the very beginning so the comment blaming KVM to explain why other CPUs
lack 'xsaves' is likely outdated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210412073952.860944-1-vkuznets@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-23-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-22-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-20-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The write_elf*() handlers are used to dump vmcore images.
This feature is only meaningful for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-19-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu_get_crash_info() is called on GUEST_PANICKED events,
which only occur in system emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-18-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Migration is specific to system emulation.
- Move the CPUClass::vmsd field to SysemuCPUOps,
- restrict VMSTATE_CPU() macro to sysemu,
- vmstate_dummy is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-16-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Quoting Peter Maydell [*]:
There are two ways to handle migration for
a CPU object:
(1) like any other device, so it has a dc->vmsd that covers
migration for the whole object. As usual for objects that are a
subclass of a parent that has state, the first entry in the
VMStateDescription field list is VMSTATE_CPU(), which migrates
the cpu_common fields, followed by whatever the CPU's own migration
fields are.
(2) a backwards-compatible mechanism for CPUs that were
originally migrated using manual "write fields to the migration
stream structures". The on-the-wire migration format
for those is based on the 'env' pointer (which isn't a QOM object),
and the cpu_common part of the migration data is elsewhere.
cpu_exec_realizefn() handles both possibilities:
* for type 1, dc->vmsd is set and cc->vmsd is not,
so cpu_exec_realizefn() does nothing, and the standard
"register dc->vmsd for a device" code does everything needed
* for type 2, dc->vmsd is NULL and so we register the
vmstate_cpu_common directly to handle the cpu-common fields,
and the cc->vmsd to handle the per-CPU stuff
You can't change a CPU from one type to the other without breaking
migration compatibility, which is why some guest architectures
are stuck on the cc->vmsd form. New targets should use dc->vmsd.
To avoid new targets to start using type (2), rename cc->vmsd as
cc->legacy_vmsd. The correct field to implement is dc->vmsd (the
DeviceClass one).
See also commit b170fce3dd ("cpu: Register VMStateDescription
through CPUState") for historic background.
[*] https://www.mail-archive.com/qemu-devel@nongnu.org/msg800849.html
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210517105140.1062037-13-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expose AVX (VEX-encoded) versions of the Vector Neural Network
Instructions to guest.
The bit definition:
CPUID.(EAX=7,ECX=1):EAX[bit 4] AVX_VNNI
The following instructions are available when this feature is
present in the guest.
1. VPDPBUS: Multiply and Add Unsigned and Signed Bytes
2. VPDPBUSDS: Multiply and Add Unsigned and Signed Bytes with Saturation
3. VPDPWSSD: Multiply and Add Signed Word Integers
4. VPDPWSSDS: Multiply and Add Signed Integers with Saturation
As for the kvm related code, please reference Linux commit id 1085a6b585d7.
The release document ref below link:
https://software.intel.com/content/www/us/en/develop/download/\
intel-architecture-instruction-set-extensions-programming-reference.html
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20210407015609.22936-1-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
tb_gen_code() assumes that tb->size must never be zero, otherwise it
may produce spurious exceptions. For x86_64 this may happen when
creating a translation block for the vsyscall page.
Fix by pretending that vsyscall translation blocks have at least one
instruction.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210519045738.1335210-2-iii@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With the previous patch for check_io, we now have enough for
the compiler to dead-code eliminate all of the i/o helpers.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-51-richard.henderson@linaro.org>
The we never allow i/o from user-only, and the tss check
that helper_check_io does will always fail. Use an ifdef
within gen_check_io and return false, indicating that an
exception is known to be raised.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-50-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Drop helper_check_io[bwl] and expose their common
subroutine to tcg directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210514151342.384376-49-richard.henderson@linaro.org>
Pass in a pre-truncated TCGv_i32 value. We were doing the
truncation of EDX in multiple places, now only once per insn.
While all callers use s->tmp2_i32, for cleanliness of the
subroutine, use a parameter anyway.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-48-richard.henderson@linaro.org>
Get cur_eip from DisasContext. Do not require the caller
to use svm_is_rep; get prefix from DisasContext. Use the
proper symbolic constants for SVM_IOIO_*.
While we're touching all call sites, return bool in
preparation for gen_check_io raising #GP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-47-richard.henderson@linaro.org>
At minimum, wrmsr can change efer, which affects HF_LMA.
Cc: qemu-stable@nongnu.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-46-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-45-richard.henderson@linaro.org>
The user-version is a no-op. This lets us completely
remove tcg/user/svm_stubs.c.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-44-richard.henderson@linaro.org>
Use a single helper, flush_page, to do the work.
Use gen_svm_check_intercept.
Perform the zero-extension for invlpga inline.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-43-richard.henderson@linaro.org>
These instructions are all privileged.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-42-richard.henderson@linaro.org>
Having the callers upcast to X86CPU is a waste, since we
don't need it. We even have to recover env in do_hlt.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-41-richard.henderson@linaro.org>
Pull the svm intercept check into the translator.
Pull the entire implementation of lmsw into the translator.
Push the check for CR8LEG into the regno validation switch.
Unify the gen_io_start check between read/write.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-40-richard.henderson@linaro.org>
This function is only called from tcg/sysemu/.
There is no need for a stub in tcg/user/.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-39-richard.henderson@linaro.org>
When exiting helper_svm_check_intercept via exception, cpu_vmexit
calls cpu_restore_state, which will recover eip and cc_op via unwind.
Therefore we do not need to store eip or cc_op before the call.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-38-richard.henderson@linaro.org>
The param argument to helper_svm_check_intercept_param is always 0;
eliminate it and rename to helper_svm_check_intercept. Fold
gen_svm_check_intercept_param into gen_svm_check_intercept.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-37-richard.henderson@linaro.org>
Both invocations pass the start of the current instruction,
which is available as s->base.pc_next. The function sets
is_jmp, so we can eliminate a second setting.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-36-richard.henderson@linaro.org>
Any helper that always raises an exception or interrupt,
or simply exits to the main loop, can be so marked.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-35-richard.henderson@linaro.org>
Use STUB_HELPER to ensure that such calls are always eliminated.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-34-richard.henderson@linaro.org>
Our sysemu implementation is a stub. We can already intercept
instructions for vmexit, and raising #UD is trivial.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-33-richard.henderson@linaro.org>
For user-only, we do not need to check for VMM intercept.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-32-richard.henderson@linaro.org>
Most of the VMM instructions are already disabled for user-only,
by being usable only from ring 0.
The spec is intentionally loose for VMMCALL, allowing the VMM to
define syscalls for user-only. However, we're not emulating any
VMM, so VMMCALL can just raise #UD unconditionally.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-31-richard.henderson@linaro.org>
This removes an ifdef from the middle of disas_insn,
and ensures that the branch is not reachable.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-30-richard.henderson@linaro.org>
Sort all of the single-byte members to the same area
of the structure, eliminating 8 bytes of padding.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-29-richard.henderson@linaro.org>
After fixing a typo in the comment, fixup for CODING_STYLE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210514151342.384376-28-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-27-richard.henderson@linaro.org>
It's just as easy to clear the flag with AND than assignment.
In two cases the test for the bit can be folded together with
the test for HF_INHIBIT_IRQ_MASK.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-26-richard.henderson@linaro.org>
Both of these fields store the size of a single memory access,
so the range of values is 0-8.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-25-richard.henderson@linaro.org>
Currently, vex_l is either {0,1}; if in the future we implement
AVX-512, the max value will be 2. In vex_v we store a register
number. This is 0-15 for SSE, and 0-31 for AVX-512.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-24-richard.henderson@linaro.org>
The highest bit in this set is 0x40 (PREFIX_REX).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-23-richard.henderson@linaro.org>
The range of values is -1 (none) to 5 (R_GS).
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-22-richard.henderson@linaro.org>
The value comes from tb->flags, which is uint32_t.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-21-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-20-richard.henderson@linaro.org>
Treat this flag exactly like we treat the other rex bits.
The -1 initialization is unused; the two tests are > 0 and == 1,
so the value can be reduced to a bool.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-19-richard.henderson@linaro.org>
Treat this flag exactly like we treat rex_b and rex_x.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-18-richard.henderson@linaro.org>
Change the storage from int to uint8_t since the value is in {0,8}.
For x86_64 add 0 in the macros to (1) promote the type back to int,
and (2) make the macro an rvalue.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-17-richard.henderson@linaro.org>
The existing flag, x86_64_hregs, does not accurately describe
its setting. It is true if and only if a REX prefix has been
seen. Yes, that affects the "h" regs, but that's secondary.
Add PREFIX_REX and include this bit in s->prefix. Add REX_PREFIX
so that the check folds away when x86_64 is compiled out.
Fold away the reg >= 8 check, because bit 3 of the register
number comes from the REX prefix in the first place.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-16-richard.henderson@linaro.org>
LMA disables traditional segmentation, exposing a flat address space.
This means that ADDSEG is off.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-15-richard.henderson@linaro.org>
LMA is a pre-requisite for CODE64, so there is no way to disable it
for x86_64-linux-user, and there is no way to enable it for i386.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-14-richard.henderson@linaro.org>
For x86_64 user-only, there is no way to leave 64-bit mode.
Without x86_64, there is no way to enter 64-bit mode. There is
an existing macro to aid with that; simply place it in the right
place in the ifdef chain.
Since we're adding an accessor macro, pull the value directly out
of flags when we're not assuming a constant.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-13-richard.henderson@linaro.org>
For user-only, SS32 == !VM86, because we are never in
real-mode. Since we cannot enter vm86 mode for x86_64
user-only, SS32 is always set.
Since we're adding an accessor macro, pull the value
directly out of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-12-richard.henderson@linaro.org>
For user-only, CODE32 == !VM86, because we are never in real-mode.
Since we cannot enter vm86 mode for x86_64 user-only, CODE32 is
always set.
Since we're adding an accessor macro, pull the value directly out
of flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-11-richard.henderson@linaro.org>
For i386-linux-user, we can enter vm86 mode via the vm86(2) syscall.
That syscall explicitly returns to 32-bit mode, and the syscall does
not exist for a 64-bit x86_64 executable.
Since we're adding an accessor macro, pull the value directly out of
flags otherwise.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-10-richard.henderson@linaro.org>
On real hardware, the linux kernel has the iopl(2) syscall which
can set IOPL to 3, to allow e.g. the xserver to briefly disable
interrupts while programming the graphics card.
However, QEMU cannot and does not implement this syscall, so the
IOPL is never changed from 0. Which means that all of the checks
vs CPL <= IOPL are false for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-9-richard.henderson@linaro.org>
A user-mode executable always runs in ring 3.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-8-richard.henderson@linaro.org>
A user-mode executable is never in real-mode. Since we're adding
an accessor macro, pull the value directly out of flags for sysemu.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-7-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-6-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-5-richard.henderson@linaro.org>
In vm86 mode, we use the same helper as real-mode, but with
an extra check for IOPL. All non-exceptional paths set EFLAGS.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-4-richard.henderson@linaro.org>
Split out the check for CPL != 0 and the raising of #GP.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-3-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210514151342.384376-2-richard.henderson@linaro.org>
Ram block notifiers are currently not aware of resizes. To properly
handle resizes during migration, we want to teach ram block notifiers about
resizeable ram.
Introduce the basic infrastructure but keep using max_size in the
existing notifiers. Supply the max_size when adding and removing ram
blocks. Also, notify on resizes.
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: xen-devel@lists.xenproject.org
Cc: haxm-team@intel.com
Cc: Paul Durrant <paul@xen.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Wenchao Wang <wenchao.wang@intel.com>
Cc: Colin Xu <colin.xu@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210429112708.12291-3-david@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Unify the duplicate code between get_hphys and mmu_translate, by simply
making get_hphys call mmu_translate. This also fixes the support for
5-level nested page tables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to unify the two stages of page table lookup, we need
mmu_translate to use either the host CR0/EFER/CR4 or the guest's.
To do so, make mmu_translate use the same pg_mode constants that
were used for the NPT lookup.
This also prepares for adding 5-level NPT support, which however does
not work yet.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract the page table lookup out of handle_mmu_fault, which only has
to invoke mmu_translate and either fill the TLB or deliver the page
fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will reuse the page walker for both SVM and regular accesses. To do
so we will build a function that receives the currently active paging
mode; start by including in cpu.h the constants and the function to go
from cr4/hflags/efer to the paging mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
while on x86 all CPU classes can use the same set of TCGCPUOps,
on ARM the right accel behavior depends on the type of the CPU.
So we need a way to specialize the accel behavior according to
the CPU. Therefore, add a second initialization, after the
accel_cpu->cpu_class_init, that allows to do this.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210322132800.7470-24-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
cpu_load_efer is now used only for sysemu code.
Therefore, move this function implementation to
sysemu-only section of helper.c
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-22-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
a number of registers are read as 64bit under the condition that
(hflags & HF_CS64_MASK) || TARGET_X86_64)
and a number of registers are written as 64bit under the condition that
(hflags & HF_CS64_MASK).
Provide some auxiliary functions that do that.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210322132800.7470-20-cfontana@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>