Now that we have memory access attribute information in the watchpoint
checking code, we can correctly implement handling of watchpoints
which should match only on userspace accesses, where LDRT/STRT/LDT/STT
from EL1 are treated as userspace accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add a transaction attribute indicating that a memory access is being
done from user-mode (unprivileged). This corresponds to an equivalent
signal in ARM AMBA buses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Factor out the page table walk memory accesses into their own function,
so that we can specify the correct S/NS memory attributes for them.
This will also provide a place to use the correct endianness and
handle the need for a stage-2 translation when virtualization is
supported.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Honour the NS bit in ARM page tables:
* when adding entries to the TLB, include the Secure/NonSecure
transaction attribute
* set the NS bit in the PAR when doing ATS operations
Note that we don't yet correctly use the NSTable bit to
cause the page table walk itself to use the right attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Switch all the uses of ld/st*_phys to address_space_ld/st*,
except for those cases where the address space is the CPU's
(ie cs->as). This was done with the following script which
generates a Coccinelle patch.
A few over-80-columns lines in the result were rewrapped by
hand where Coccinelle failed to do the wrapping automatically,
as well as one location where it didn't put a line-continuation
'\' when wrapping lines on a change made to a match inside
a macro definition.
===begin===
#!/bin/sh -e
# Usage:
# ./ldst-phys.spatch.sh > ldst-phys.spatch
# spatch -sp_file ldst-phys.spatch -dir . | sed -e '/^+/s/\t/ /g' > out.patch
# patch -p1 < out.patch
for FN in ub uw_le uw_be l_le l_be q_le q_be uw l q; do
cat <<EOF
@ cpu_matches_ld_${FN} @
expression E1,E2;
identifier as;
@@
ld${FN}_phys(E1->as,E2)
@ other_matches_ld_${FN} depends on !cpu_matches_ld_${FN} @
expression E1,E2;
@@
-ld${FN}_phys(E1,E2)
+address_space_ld${FN}(E1,E2, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
for FN in b w_le w_be l_le l_be q_le q_be w l q; do
cat <<EOF
@ cpu_matches_st_${FN} @
expression E1,E2,E3;
identifier as;
@@
st${FN}_phys(E1->as,E2,E3)
@ other_matches_st_${FN} depends on !cpu_matches_st_${FN} @
expression E1,E2,E3;
@@
-st${FN}_phys(E1,E2,E3)
+address_space_st${FN}(E1,E2,E3, MEMTXATTRS_UNSPECIFIED, NULL)
EOF
done
===endit===
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Capture the memory attributes for the transaction which triggered
a watchpoint; this allows CPU specific code to implement features
like ARM's "user-mode only WPs also hit for LDRT/STRT accesses
made from privileged code". This change also correctly passes
through the memory attributes to the underlying device when
a watchpoint access doesn't hit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Add new address_space_ld*/st* functions which allow transaction
attributes and error reporting for basic load and stores. These
are named to be in line with the address_space_read/write/rw
buffer operations.
The existing ld/st*_phys functions are now wrappers around
the new functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make address_space_rw take transaction attributes, rather
than always using the 'unspecified' attributes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Convert the subpage memory ops to _with_attrs; this will allow
us to pass the attributes through to the underlying access
functions. (Nothing uses the attributes yet.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Add a MemTxAttrs field to the IOTLB, and allow target-specific
code to set it via a new tlb_set_page_with_attrs() function;
pass the attributes through to the device when making IO accesses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Make the CPU iotlb a structure rather than a plain hwaddr;
this will allow us to add transaction attributes to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Rather than retaining io_mem_read/write as simple wrappers around
the memory_region_dispatch_read/write functions, make the latter
public and change all the callers to use them, since we need to
touch all the callsites anyway to add MemTxAttrs and MemTxResult
support. Delete io_mem_read and io_mem_write entirely.
(All the callers currently pass MEMTXATTRS_UNSPECIFIED
and convert the return value back to bool or ignore it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Define an API so that devices can register MemoryRegionOps whose read
and write callback functions are passed an arbitrary pointer to some
transaction attributes and can return a success-or-failure status code.
This will allow us to model devices which:
* behave differently for ARM Secure/NonSecure memory accesses
* behave differently for privileged/unprivileged accesses
* may return a transaction failure (causing a guest exception)
for erroneous accesses
This patch defines the new API and plumbs the attributes parameter through
to the memory.c public level functions io_mem_read() and io_mem_write(),
where it is currently dummied out.
The success/failure response indication is also propagated out to
io_mem_read() and io_mem_write(), which retain the old-style
boolean true-for-error return.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
VHOST_SET_LOG_BASE got an incorrect address, causing
migration errors and potentially even memory corruption.
Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1429283565-32265-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The image field in BlockDeviceInfo should never be null, however
bdrv_block_device_info() is not filling it in.
This makes the 'info block -n -v' command crash QEMU.
The proper solution is probably to move the relevant code from
bdrv_query_info() to bdrv_block_device_info(), but since we're too
close to the release for that this simpler workaround solves the
crash.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 1429274688-8115-1-git-send-email-berto@igalia.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After commit 5312bd8 the bonito_readl() and bonito_writel() have been
accessing incorrect addresses. Consequently QEMU is crashing when trying
to boot Linux kernel on fulong2e machine.
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
The invalidation code introduced in commit 2360b works by inverting most bits
of env->msr to ensure that hreg_store_msr() will forcibly update the CPU env
state to reflect the new msr value post-migration. Unfortunately
hreg_store_msr() is called with alter_hv set to 0 which preserves the MSR_HVB
state from the CPU env which is now the opposite value to what it should be.
Ensure that we don't invalidate the msr MSR_HVB bit during cpu_post_load so
that the correct value is restored. This fixes suspend/resume for PPC64.
Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Alexander Graf <agraf@suse.de>
Message-id: 1429255009-12751-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This document covers the guest-side hardware interface, as
well as the host-side programming API of QEMU's firmware
configuration (fw_cfg) device.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unfortunately it turns out that libseccomp 2.2 still does not work
correctly on non-x86 architectures; return to the previous configure
setup of insisting on libseccomp 2.1 or better and i386/x86_64 and
disabling seccomp support in all other situations.
This reverts the two commits:
* "seccomp: libseccomp version varying according to arch"
(commit 896848f0d3)
* "seccomp: update libseccomp version and remove arch restriction"
(commit 8e27fc2004)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1428670681-23032-1-git-send-email-peter.maydell@linaro.org
Current QEMU crashes when specifying an illegal model with the
"-net nic,model=xxx" option, e.g.:
$ qemu-system-x86_64 -net nic,model=n/a
qemu-system-x86_64: Unsupported NIC model: n/a
Program received signal SIGSEGV, Segmentation fault.
The gdb backtrace looks like this:
0x0000555555965fe0 in error_get_pretty (err=0x0) at util/error.c:152
152 return err->msg;
(gdb) bt
0 0x0000555555965fe0 in error_get_pretty (err=0x0) at util/error.c:152
1 0x0000555555965ffd in error_report_err (err=0x0) at util/error.c:157
2 0x0000555555809c90 in pci_nic_init_nofail (nd=0x555555e49860 <nd_table>, rootbus=0x5555564409b0,
default_model=0x55555598c37b "e1000", default_devaddr=0x0) at hw/pci/pci.c:1663
3 0x0000555555691e42 in pc_nic_init (isa_bus=0x555556f71900, pci_bus=0x5555564409b0)
at hw/i386/pc.c:1506
4 0x000055555569396b in pc_init1 (machine=0x5555562abbf0, pci_enabled=1, kvmclock_enabled=1)
at hw/i386/pc_piix.c:248
5 0x0000555555693d27 in pc_init_pci (machine=0x5555562abbf0) at hw/i386/pc_piix.c:310
6 0x000055555572ddf5 in main (argc=3, argv=0x7fffffffe018, envp=0x7fffffffe038) at vl.c:4226
The problem is that pci_nic_init_nofail() does not check whether the err
parameter from pci_nic_init has been set up and thus passes a NULL pointer
to error_report_err(). Fix it by correctly checking the err parameter.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The type name for the SoC device, unlike those of its sub-devices,
did not follow the QOM naming conventions. While the usage is internal
only, this is exposed through QMP and HMP, so fix it before release.
Cc: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Alistair Francis <alistair@alistair23.me>
Message-id: 1428676676-23056-1-git-send-email-afaerber@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: CAL5wTH64_ykF17cw2T1Axq8P3vCWm=6WbUJ3qJrLF-u+-MmzUw@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Acked-by: Michael Walle <michael@walle.cc>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses (by disabling memory and/or I/O decoding
and subsequently causing [CPU side] accesses to the respective address
ranges), which (depending on system configuration) may be fatal to the
host.
This is CVE-2015-2756 / XSA-126.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Message-id: alpine.DEB.2.02.1503311510300.7690@kaball.uk.xensource.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libxseg has changed license to GPLv3. QEMU includes GPL "v2 only" code
which is not compatible with GPLv3. This means the resulting binaries
may not be redistributable!
Disable Archipelago (libxseg) by default to prevent accidental license
violations. Also warn if linking against libxseg is enabled to remind
the user.
Note that this commit does not constitute any advice about software
licensing. If you have doubts you should consult a lawyer.
Cc: Chrysostomos Nanakos <cnanakos@grnet.gr>
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Reported-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1428587538-8765-1-git-send-email-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 951c6300f7 out-of-lined the 32-bit-host versions of
tcg_gen_{ld,st}_i64, but in the process it inadvertently changed
an #ifdef HOST_WORDS_BIGENDIAN to #ifdef TCG_TARGET_WORDS_BIGENDIAN.
Since the latter doesn't get defined anywhere this meant we always
took the "LE host" codepath, and stored the two halves of the value
in the wrong order on BE hosts. This typically breaks any 64-bit
guest on a 32-bit BE host completely, and will have possibly more
subtle effects even for 32-bit guests.
Switch the ifdef back to HOST_WORDS_BIGENDIAN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1428523029-13620-1-git-send-email-peter.maydell@linaro.org
newer libiscsi versions may return zero events from iscsi_which_events.
In this case iscsi_service will return immediately without any progress.
To avoid busy waiting for iscsi_which_events to change we deregister all
read and write handlers in this case and schedule a timer to periodically
check iscsi_which_events for changed events.
Next libiscsi version will introduce async reconnects and zero events
are returned while libiscsi is waiting for a reconnect retry.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1428437295-29577-1-git-send-email-pl@kamp.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There are two problems with memory barriers in async.c. The fix is
to use atomic_xchg in order to achieve sequential consistency between
the scheduling of a bottom half and the corresponding execution.
First, if bh->scheduled is already 1 in qemu_bh_schedule, QEMU does
not execute a memory barrier to order any writes needed by the callback
before the read of bh->scheduled. If the other side sees req->state as
THREAD_ACTIVE, the callback is not invoked and you get deadlock.
Second, the memory barrier in aio_bh_poll is too weak. Without this
patch, it is possible that bh->scheduled = 0 is not "published" until
after the callback has returned. Another thread wants to schedule the
bottom half, but it sees bh->scheduled = 1 and does nothing. This causes
a lost wakeup. The memory barrier should have been changed to smp_mb()
in commit 924fe12 (aio: fix qemu_bh_schedule() bh->ctx race condition,
2014-06-03) together with qemu_bh_schedule()'s. Guess who reviewed
that patch?
Both of these involve a store and a load, so they are reproducible on
x86_64 as well. It is however much easier on aarch64, where the
libguestfs test suite triggers the bug fairly easily. Even there the
failure can go away or appear depending on compiler optimization level,
tracing options, or even kernel debugging options.
Paul Leveille however reported how to trigger the problem within 15
minutes on x86_64 as well. His (untested) recipe, reproduced here
for reference, is the following:
1) Qcow2 (or 3) is critical – raw files alone seem to avoid the problem.
2) Use “cache=directsync” rather than the default of
“cache=none” to make it happen easier.
3) Use a server with a write-back RAID controller to allow for rapid
IO rates.
4) Run a random-access load that (mostly) writes chunks to various
files on the virtual block device.
a. I use ‘diskload.exe c:25’, a Microsoft HCT load
generator, on Windows VMs.
b. Iometer can probably be configured to generate a similar load.
5) Run multiple VMs in parallel, against the same storage device,
to shake the failure out sooner.
6) IvyBridge and Haswell processors for certain; not sure about others.
A similar patch survived over 12 hours of testing, where an unpatched
QEMU would fail within 15 minutes.
This bug is, most likely, also the cause of failures in the libguestfs
testsuite on AArch64.
Thanks to Laszlo Ersek for initially reporting this bug, to Stefan
Hajnoczi for suggesting closer examination of qemu_bh_schedule, and to
Paul for providing test input and a prototype patch.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reported-by: Paul Leveille <Paul.Leveille@stratus.com>
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1428419779-26062-1-git-send-email-pbonzini@redhat.com
Suggested-by: Paul Leveille <Paul.Leveille@stratus.com>
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 0b183fc871:"memory: move mem_path handling to
memory_region_allocate_system_memory" split memory_region_init_ram and
memory_region_init_ram_from_file. Also it moved mem-path handling a step
up from memory_region_init_ram to memory_region_allocate_system_memory.
Therefore for any board that uses memory_region_init_ram directly,
-mem-path is not supported.
Fix this by replacing memory_region_init_ram with
memory_region_allocate_system_memory.
Signed-off-by: Dirk Mueller <dmueller@suse.com>
Message-id: CAL5wTH4UHYKpJF=dLJfFzxpufjY189chnCow47-ySuLf8GLbug@mail.gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After qemu_iovec_destroy, the QEMUIOVector's size is zeroed and
the zero size ultimately is used to compute virtqueue_push's len
argument. Therefore, reads from virtio-blk devices did not
migrate their results correctly. (Writes were okay).
Save the size in virtio_blk_handle_request, and use it when the request
is completed.
Based on a patch by Wen Congyang.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-id: 1427997044-392-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In recent qemu versions, it is possible to override the backing file
name and format that is stored in the image file with values given at
runtime. In such cases, the temporary override could end up in the
image header if the qcow2 header was updated, while obviously correct
behaviour would be to leave the on-disk backing file path/format
unchanged.
Fix this and add a test case for it.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1428411796-2852-1-git-send-email-kwolf@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
kvm_stat.{1,pod} started showing up as untracked files in my
directory, and I nearly accidentally merged them into a commit
with my usual habit of 'git add .'. Rather than spelling out
each such file, just ignore the entire pattern.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With a mask value of 0x00400000, the result will never be 1.
This fixes a Coverity warning.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Probably a copy&paste bug. Fixing it helps identifying the device model
behind port 0x61.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 89b516d8b9 ("glib: add
compatibility interface for g_get_monotonic_time()") aimed
at making qemu build with old glib versions. At least SLES11SP3,
however, contains a backport of g_get_monotonic_time() while
keeping the reported glib version at 2.22.
Let's work around this by a strategically placed #define.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1427987865-433-2-git-send-email-cornelia.huck@de.ibm.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
virtio-blk fix, because Wen only posted a prototype and the changes
I made were pretty large. It definitely needs another pair of eyes
(but it is a 2.3 regression and a blocker).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJVHUtcAAoJEL/70l94x66Dr1IIAIq+2i+79CoOW1VgoqdN9hBM
co7s8MzVwPzSPxMzicv94nAMBcPWfmoGzi8JJebxUmQDmZ7L33bOa64cbVgmQ5wU
gfJ+yea8TRkyDH/psv8jcvesdEgwRUnpOTCrEv4GD+haTHWZB4t6HW4KpolxbclJ
igs5MUxcH/cM//L+nyadr/ZuJvPy4sakquvnMqr5Zzr/xjwLwzbJIksoZthMdxW5
oZAY1g0T2f5sSpt0kl8lYid1njbTBX9z8ZkoftQSjRJFZ253vl+CxXFuJevke1hE
ayRhRKg5VfAyPY4txEK0+27E/Jo4X51y+6Et0N5yzrQsSZ1FeBtxzngm14gEQZA=
=CfCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Another round of small fixes. I am not including the
virtio-blk fix, because Wen only posted a prototype and the changes
I made were pretty large. It definitely needs another pair of eyes
(but it is a 2.3 regression and a blocker).
# gpg: Signature made Thu Apr 2 14:59:56 2015 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
Use $(MAKE) for recursive make
kvm-all: Sync dirty-bitmap from kvm before kvm destroy the corresponding dirty_bitmap
util/qemu-config: fix regression of qmp_query_command_line_options
target-i386: clear bsp bit when designating bsp
qga: fitering out -fstack-protector-strong
target-i386: save 64-bit CR3 in 64-bit SMM state save area
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On BSDs "make" is typically BSD make, while "gmake" is GNU make.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Message-Id: <1427911118-21905-1-git-send-email-emaste@freebsd.org>
[Fix $(INSTALLER) too as reported by Fam Zheng. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Sometimes, we destroy the dirty_bitmap in kvm_memory_slot before any sync action
occur, this bit in dirty_bitmap will be missed, and which will lead the corresponding
dirty pages to be missed in migration.
This usually happens when do migration during VM's Start-up or Reboot.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
[Use s->migration_log instead of exec.c's in_migration. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>