This patch implements the PROBE request. At the moment,
only THE RESV_MEM property is handled. The first goal is
to report iommu wide reserved regions such as the MSI regions
set by the machine code. On x86 this will be the IOAPIC MSI
region, [0xFEE00000 - 0xFEEFFFFF], on ARM this may be the ITS
doorbell.
In the future we may introduce per device reserved regions.
This will be useful when protecting host assigned devices
which may expose their own reserved regions
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-3-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce a new property defining a reserved region:
<low address>:<high address>:<type>.
This will be used to encode reserved IOVA regions.
For instance, in virtio-iommu use case, reserved IOVA regions
will be passed by the machine code to the virtio-iommu-pci
device (an array of those). The type of the reserved region
will match the virtio_iommu_probe_resv_mem subtype value:
- VIRTIO_IOMMU_RESV_MEM_T_RESERVED (0)
- VIRTIO_IOMMU_RESV_MEM_T_MSI (1)
on PC/Q35 machine, this will be used to inform the
virtio-iommu-pci device it should bypass the MSI region.
The reserved region will be: 0xfee00000:0xfeefffff:1.
On ARM, we can declare the ITS MSI doorbell as an MSI
region to prevent MSIs from being mapped on guest side.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20200629070404.10969-2-eric.auger@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add properties to the i.MX6UL processor to be able to select a
particular PHY on the MDIO bus for each FEC device.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: ea1d604198b6b73ea6521676e45bacfc597aba53.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need a solution to use an Ethernet PHY that is not the first device
on the MDIO bus (device 0 on MDIO bus).
As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but
only one MDIO bus on which the 2 related PHY are connected but at unique
addresses.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
real_dirty_pages becomes equal to total ram size after dirty log sync
in ram_init_bitmaps, the reason is that the bitmap of ramblock is
initialized to be all set, so old path counts them as "real dirty" at
beginning.
This causes wrong dirty rate and false positive throttling.
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200622032037.31112-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This patch introduces set_config & get_config method which allows
vhost_net set/get the config to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-13-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_force_iommu callback
to force enable features bit VIRTIO_F_IOMMU_PLATFORM.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-11-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
use vhost_vq_get_addr callback to get the vq address from backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-10-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_vq_get_addr_op callback to get
the vring addr from the backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-9-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces new VhostOps vhost_dev_start callback which allows the
vhost_net set the start/stop status to backend
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-7-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This patch introduces queue_enabled() method which allows the
transport to implement its own way to report whether or not a queue is
enabled.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-4-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This is a small function that can get the peer
from given NetClientState and queue_index
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200701145538.22333-2-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Let's auto-enable it also when maxmem is specified but no slots are
defined. This will result in us properly creating ACPI srat tables,
indicating the maximum possible PFN to the guest OS. Based on this, e.g.,
Linux will enable the swiotlb properly.
This avoids having to manually force the switolb on (swiotlb=force) in
Linux in case we're booting only using DMA memory (e.g., 2GB on x86-64),
and virtio-mem adds memory later on that really needs the swiotlb to be
used for DMA.
Let's take care of backwards compatibility if somebody has a setup that
specifies "maxram" without "slots".
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: Sergio Lopez <slp@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: qemu-arm@nongnu.org <qemu-arm@nongnu.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-22-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The content of unplugged memory is undefined and should not be migrated,
ever. Exclude all unplugged memory during precopy using the precopy notifier
infrastructure introduced for free page hinting in virtio-balloon.
Unplugged memory is marked as "not dirty", meaning it won't be
considered for migration.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-21-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to send qapi events in case the size of a virtio-mem device
changes. This allows upper layers to always know how much memory is
actually currently consumed via a virtio-mem device.
Unfortuantely, we have to report the id of our proxy device. Let's provide
an easy way for our proxy device to register, so it can send the qapi
events. Piggy-backing on the notifier infrastructure (although we'll
only ever have one notifier registered) seems to be an easy way.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-17-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's add a proxy for virtio-mem, make it a memory device, and
pass-through the properties.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-12-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is the very basic/initial version of virtio-mem. An introduction to
virtio-mem can be found in the Linux kernel driver [1]. While it can be
used in the current state for hotplug of a smaller amount of memory, it
will heavily benefit from resizeable memory regions in the future.
Each virtio-mem device manages a memory region (provided via a memory
backend). After requested by the hypervisor ("requested-size"), the
guest can try to plug/unplug blocks of memory within that region, in order
to reach the requested size. Initially, and after a reboot, all memory is
unplugged (except in special cases - reboot during postcopy).
The guest may only try to plug/unplug blocks of memory within the usable
region size. The usable region size is a little bigger than the
requested size, to give the device driver some flexibility. The usable
region size will only grow, except on reboots or when all memory is
requested to get unplugged. The guest can never plug more memory than
requested. Unplugged memory will get zapped/discarded, similar to in a
balloon device.
The block size is variable, however, it is always chosen in a way such that
THP splits are avoided (e.g., 2MB). The state of each block
(plugged/unplugged) is tracked in a bitmap.
As virtio-mem devices (e.g., virtio-mem-pci) will be memory devices, we now
expose "VirtioMEMDeviceInfo" via "query-memory-devices".
--------------------------------------------------------------------------
There are two important follow-up items that are in the works:
1. Resizeable memory regions: Use resizeable allocations/RAM blocks to
grow/shrink along with the usable region size. This avoids creating
initially very big VMAs, RAM blocks, and KVM slots.
2. Protection of unplugged memory: Make sure the gust cannot actually
make use of unplugged memory.
Other follow-up items that are in the works:
1. Exclude unplugged memory during migration (via precopy notifier).
2. Handle remapping of memory.
3. Support for other architectures.
--------------------------------------------------------------------------
Example usage (virtio-mem-pci is introduced in follow-up patches):
Start QEMU with two virtio-mem devices (one per NUMA node):
$ qemu-system-x86_64 -m 4G,maxmem=20G \
-smp sockets=2,cores=2 \
-numa node,nodeid=0,cpus=0-1 -numa node,nodeid=1,cpus=2-3 \
[...]
-object memory-backend-ram,id=mem0,size=8G \
-device virtio-mem-pci,id=vm0,memdev=mem0,node=0,requested-size=0M \
-object memory-backend-ram,id=mem1,size=8G \
-device virtio-mem-pci,id=vm1,memdev=mem1,node=1,requested-size=1G
Query the configuration:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 0
size: 0
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 1073741824
size: 1073741824
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
Add some memory to node 0:
(qemu) qom-set vm0 requested-size 500M
Remove some memory from node 1:
(qemu) qom-set vm1 requested-size 200M
Query the configuration again:
(qemu) info memory-devices
Memory device [virtio-mem]: "vm0"
memaddr: 0x140000000
node: 0
requested-size: 524288000
size: 524288000
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem0
Memory device [virtio-mem]: "vm1"
memaddr: 0x340000000
node: 1
requested-size: 209715200
size: 209715200
max-size: 8589934592
block-size: 2097152
memdev: /objects/mem1
[1] https://lkml.kernel.org/r/20200311171422.10484-1-david@redhat.com
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-11-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
COLO will copy all memory in a RAM block, disable discarding of RAM.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-10-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The only remaining special case is postcopy. It cannot handle
concurrent discards yet, which would result in requesting already sent
pages from the source. Special-case it in virtio-balloon instead.
Introduce migration_in_incoming_postcopy(), to find out if incoming
postcopy is active.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-7-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VFIO is (except devices without a physical IOMMU or some mediated devices)
incompatible with discarding of RAM. The kernel will pin basically all VM
memory. Let's convert to ram_block_discard_disable(), which can now
fail, in contrast to qemu_balloon_inhibit().
Leave "x-balloon-allowed" named as it is for now.
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Tony Krowiak <akrowiak@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Pierre Morel <pmorel@linux.ibm.com>
Cc: Eric Farman <farman@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-4-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We want to replace qemu_balloon_inhibit() by something more generic.
Especially, we want to make sure that technologies that really rely on
RAM block discards to work reliably to run mutual exclusive with
technologies that effectively break it.
E.g., vfio will usually pin all guest memory, turning the virtio-balloon
basically useless and make the VM consume more memory than reported via
the balloon. While the balloon is special already (=> no guarantees, same
behavior possible afer reboots and with huge pages), this will be
different, especially, with virtio-mem.
Let's implement a way such that we can make both types of technology run
mutually exclusive. We'll convert existing balloon inhibitors in successive
patches and add some new ones. Add the check to
qemu_balloon_is_inhibited() for now. We might want to make
virtio-balloon an acutal inhibitor in the future - however, that
requires more thought to not break existing setups.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-3-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().
object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails. These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.
Most of its callers do. Exceptions:
* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
i.e. they ignore errors.
* spapr_machine_init() passes &error_fatal.
* s390_pcihost_realize(), virtio_serial_device_realize(),
s390_pcihost_plug() pass the error to their callers. The latter two
keep going after the error, which looks wrong.
Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
All callers pass &error_abort. Drop the parameter.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-14-armbru@redhat.com>
It seems like Windows does not really require 2 IRQs to have a
functioning VMBus.
Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200617160904.681845-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road. At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html
Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).
However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants. By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.
Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).
I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use. As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:
Use of MIN when MIN_CONST is needed:
In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
249 | ({ \
| ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
92 | char array[MIN(1, 2)] = "";
| ^~~
Use of MIN_CONST when MIN is needed:
/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
1225 | i = MIN_CONST(i, n);
| ^
Use of MIN in the preprocessor:
In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
249 | ({ \
| ^
Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros. cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.
It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Both x87 and m68k need the low parts of the quotient for their
remainder operations. Arrange for floatx80_modrem to track those bits
and return them via a pointer.
The architectures using float32_rem and float64_rem do not appear to
need this information, so the *_rem interface is left unchanged and
the information returned only from floatx80_modrem. The logic used to
determine the low 7 bits of the quotient for m68k
(target/m68k/fpu_helper.c:make_quotient) appears completely bogus (it
looks at the result of converting the remainder to integer, the
quotient having been discarded by that point); this patch does not
change that, but the m68k maintainers may wish to do so.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656500.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer. This is also useful for emulating the x87 fprem
and fprem1 instructions. Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.
There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The PCA9552 has 16 GPIOs which can be used as input,
output or PWM mode. QEMU models the output GPIO with
the qemu_irq type. Let the device expose the 16 GPIOs
to allow us to later connect LEDs to these outputs.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-10-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a description field to distinguish between multiple devices.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-6-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract the code common to the PCA955x family in PCA955xClass,
keeping the PCA9552 specific parts into pca9552_class_init().
Remove the 'TODO' comment added in commit 5141d4158c.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-5-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various code from the PCA9552 device model is generic to the
PCA955X family. We'll split the generic code in a base class
in the next commit. To ease review, first do a dumb renaming.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PCA9552 device does not expose LEDs, but simple pins
to connnect LEDs to. To be clearer with the device model,
rename 'nr_leds' as 'pin_count'.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Extract i2c_try_create_slave() and i2c_realize_and_unref()
from i2c_create_slave().
We can now set properties on a I2CSlave before it is realized.
This is in line with the recent qdev/QOM changes merged
in commit 6675a653d2.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072723.6324-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
AspeedMachineState seems crippled. We use incorrectly 2
different structures to do the same thing. Merge them
altogether:
- Move AspeedMachine fields to AspeedMachineState
- AspeedMachineState is now QOM
- Remove unused AspeedMachine structure
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-4-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To have a more consistent naming, rename AspeedBoardState
as AspeedMachineState.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-id: 20200623072132.2868-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAl71vLgeHG1hcmsuY2F2
ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfRx8H/Ao3EPvVW562Y0tq
yZNAJ/wCmhTM7+ekOzeImD/G/Tf8ugHgV0BlPfDlOajD6bxrlS6pnv3ncaKfN7G/
d59ERGWUUqM8MsJ7t/tg/JGvLi0wBAj4ekSCe/MD5xxa2b9GzDGThjZASQvKHhMP
q4EXMN5SgrRTRIqZ0w+ItPNoihLULiYq1LsNV6VgzBqhVhk349caOxjQ0PSdO64Q
M7ymcVmiPg0KQPEzbcZDmiQEHP8AbnrJ+RImRrHOyL6pq87du7kPrb7ENpqgt4cA
XLRzOccPvAp7BshEJIPgjaxNbCN555TMPswHp32lBRvDCF5lZ620TmwtWvb5pKXY
kTxPd+4=
=VN0J
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-macppc-20200626' into staging
qemu-macppc patches
# gpg: Signature made Fri 26 Jun 2020 10:15:36 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-macppc-20200626: (22 commits)
adb: add ADB bus trace events
adb: use adb_device prefix for ADB device trace events
adb: only call autopoll callbacks when autopoll is not blocked
mac_via: rework ADB state machine to be compatible with both MacOS and Linux
mac_via: move VIA1 portB write logic into mos6522_q800_via1_write()
pmu: add adb_autopoll_block() and adb_autopoll_unblock() functions
cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions
adb: add autopoll_blocked variable to block autopoll
adb: use adb_request() only for explicit requests
adb: add status field for holding information about the last ADB request
adb: keep track of devices with pending data
adb: introduce new ADBDeviceHasData method to ADBDeviceClass
mac_via: convert to use ADBBusState internal autopoll variables
pmu: convert to use ADBBusState internal autopoll variables
cuda: convert to use ADBBusState internal autopoll variables
adb: create autopoll variables directly within ADBBusState
adb: introduce realize/unrealize and VMStateDescription for ADB bus
pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer
pmu: fix duplicate autopoll mask variable
cuda: convert ADB autopoll timer from ns to ms
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The existing ADB state machine is designed to work with Linux which has a different
interpretation of the state machine detailed in "Guide to the Macintosh Family
Hardware". In particular the current Linux implementation includes an extra change
to IDLE state when switching the VIA between send and receive modes which does not
occur in MacOS, and omitting this transition causes the current mac_via ADB state
machine to fail.
Rework the ADB state machine accordingly so that it can enumerate and autopoll the
ADB under both Linux and MacOS, including the addition of the new adb_autopoll_block()
and adb_autopoll_unblock() functions.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-20-mark.cave-ayland@ilande.co.uk>
Whilst autopoll is enabled it is necessary to prevent the ADB buffer contents
from being overwritten until the host has read back the response in its
entirety.
Add adb_autopoll_block() and adb_autopoll_unblock() functions in preparation
for ensuring that the ADB buffer contents are protected for explicit ADB
requests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-16-mark.cave-ayland@ilande.co.uk>
Currently only 2 bits are defined: one to indicate if the request timed out (no
reply) and another to indicate whether the request was the result of an autopoll
operation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-14-mark.cave-ayland@ilande.co.uk>
Add a new pending variable to ADBBusState which is a bitmask indicating which
ADB devices have data to send. Update the bitmask every time that an ADB
request is executed.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-13-mark.cave-ayland@ilande.co.uk>
This is required later to allow devices to assert a service request (SRQ)
signal to indicate that it has data to send, without having to consume it.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-12-mark.cave-ayland@ilande.co.uk>
Rather than each ADB implementation requiring its own functions to manage
autopoll state, timers, and autopoll masks prepare to move this information
directly into ADBBusState.
Add external functions within adb.h to allow each ADB implementation to
manage the new autopoll variables.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-8-mark.cave-ayland@ilande.co.uk>
It seems that during the initial work to introduce the via-pmu ADB support a
duplicate autopoll mask variable was accidentally left in place.
Remove the duplicate autopoll_mask variable and switch everything over to
use adb_poll_mask instead.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-5-mark.cave-ayland@ilande.co.uk>
Commit 84051eb400 "adb: add property to disable direct reg 3 writes" introduced
a workaround for spurious writes to ADB register 3 when MacOS 9 enables
autopoll on the mouse device. Further analysis shows that the problem is that
only a partial request is sent, and since the len parameter is ignored then
stale data from the previous request is used causing the incorrect address
assignment.
Remove the disable-reg3-direct-writes workaround and instead check the length
parameter when the write is attempted, discarding the invalid request.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-3-mark.cave-ayland@ilande.co.uk>
This commit fixes typos in spapr_vio_reg_to_irq() comments and a macro
indentation.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Message-Id: <1590710681-12873-1-git-send-email-gromero@linux.ibm.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Remove any reference to Acpi20TPM2 and adopt an implementation
similar to build_ghes_v2().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200622140620.17229-2-eric.auger@redhat.com>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-6-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
acpi aml generator needs this, but it is in floppy code now
so we can make the function static.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: John Snow <jsnow@redhat.com>
Message-Id: <20200619091905.21676-5-kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEuBi5yt+QicLVzsZrda1lgCoLQhEFAl7x6OcACgkQda1lgCoL
QhFfbQf+MXBK1quIxEKW82Rdf3Eh/uKcAqWQ3IAd/wIHqK2fzB68PSroI7ETrwY1
z2oNtg50Wps43eaRjIJVNnEwU1yKGzDcSfjlnabDH7ZbtSx1VlSfGIiufxN6bh0A
bSBMMCPWlL2rNvQ8pI9B5fEqawjTnXn6GIAxDnYSH5wAIenKffmNC4tiN5hm8pTi
0BcsGSNiBb7BtsAokpMCrKAeASnlD1y11cFIlHmOrYOFs+m6uQ03BGu80A7P6fAa
ip93eW4g10bcBMaZhqgspALOgpEArSAg6Kg8Y9XiN9giJmdZXgRS/U1l9bkKSrXV
QGyaPsubLslMw3ZhO1vggoIxjAdwpA==
=Iew1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanberger/tags/pull-tpm-2020-06-23-1' into staging
Merge tpm 2020/06/23 v1
# gpg: Signature made Tue 23 Jun 2020 12:35:03 BST
# gpg: using RSA key B818B9CADF9089C2D5CEC66B75AD65802A0B4211
# gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211
* remotes/stefanberger/tags/pull-tpm-2020-06-23-1:
tpm: Move backend code under the 'backends/' directory
hw/tpm: Make 'tpm_util.h' publicly accessible as "sysemu/tpm_util.h"
hw/tpm: Move DEFINE_PROP_TPMBE() macro to 'tmp_prop.h' local header
hw/tpm: Move few declarations from 'tpm_util.h' to 'tpm_int.h'
hw/tpm: Make TRACE_TPM_UTIL_SHOW_BUFFER check local to tpm_util.c
hw/tpm: Remove unnecessary 'tpm_int.h' header inclusion
hw/tpm: Move 'hw/acpi/tpm.h' inclusion from header to sources
hw/tpm: Include missing 'qemu/option.h' header
hw/tpm: Do not include 'qemu/osdep.h' in header
hw/tpm: Rename TPMDEV as TPM_BACKEND in Kconfig
backends: Add TPM files into their own directory
docs/specs/tpm: Correct header path name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
LLVM's SafeStack instrumentation does not yet support programs that make
use of the APIs in ucontext.h
With the current implementation of coroutine-ucontext, the resulting
binary is incorrect, with different coroutines sharing the same unsafe
stack and producing undefined behavior at runtime.
This fix allocates an additional unsafe stack area for each coroutine,
and sets the new unsafe stack pointer before calling swapcontext() in
qemu_coroutine_new.
This is the only place where the pointer needs to be manually updated,
since sigsetjmp/siglongjmp are already instrumented by LLVM to properly
support SafeStack.
The additional stack is then freed in qemu_coroutine_delete.
Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com>
Message-id: 20200529205122.714-2-dbuono@linux.vnet.ibm.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qdev_prop_set_drive() can fail. None of the other qdev_prop_set_FOO()
can; they abort on error.
To clean up this inconsistency, rename qdev_prop_set_drive() to
qdev_prop_set_drive_err(), and create a qdev_prop_set_drive() that
aborts on error.
Coccinelle script to update callers:
@ depends on !(file in "hw/core/qdev-properties-system.c")@
expression dev, name, value;
symbol error_abort;
@@
- qdev_prop_set_drive(dev, name, value, &error_abort);
+ qdev_prop_set_drive(dev, name, value);
@@
expression dev, name, value, errp;
@@
- qdev_prop_set_drive(dev, name, value, errp);
+ qdev_prop_set_drive_err(dev, name, value, errp);
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-14-armbru@redhat.com>
qdev_prop_set_netdev() fails when the property already has a non-null
value. Seems to go back to commit 30c367ed44
"qdev-properties-system.c: Allow vlan or netdev for -device, not
both", v1.7.0. Board code doesn't expect failure, and crashes:
$ qemu-system-x86_64 --nodefaults -nic user -netdev user,id=nic0 -global e1000.netdev=nic0
Unexpected error in error_set_from_qdev_prop_error() at /work/armbru/qemu/hw/core/qdev-properties.c:1101:
qemu-system-x86_64: Property 'e1000.netdev' doesn't take value '__org.qemu.nic0
'
Aborted (core dumped)
-device and device_add handle the failure:
$ qemu-system-x86_64 -nodefaults -netdev user,id=net0 -netdev user,id=net1 -device e1000,netdev=net0,netdev=net1
qemu-system-x86_64: -device e1000,netdev=net0,netdev=net1: Property 'e1000.netdev' doesn't take value 'net1'
$ qemu-system-x86_64 -nodefaults -S -display none -monitor stdio -netdev user,id=net0 -netdev user,id=net1 -global e1000.netdev=net0
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) qemu-system-x86_64: warning: netdev net0 has no peer
qemu-system-x86_64: warning: netdev net1 has no peer
device_add e1000,netdev=net1
Error: Property 'e1000.netdev' doesn't take value 'net1'
Perhaps netdev property override could be made to work. Perhaps it
should. I'm not the right guy to figure this out. What I can do is
improve the error message a bit:
(qemu) device_add e1000,netdev=net1
Error: -global e1000.netdev=... conflicts with netdev=net1
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-11-armbru@redhat.com>
Drives with interface types other than if=none are for onboard
devices. Unfortunately, any such drives the board doesn't pick up can
still be used with -device, like this:
$ qemu-system-x86_64 -nodefaults -display none -S -drive if=floppy,id=bogus,unit=7 -device ide-cd,drive=bogus -monitor stdio
QEMU 5.0.50 monitor - type 'help' for more information
(qemu) info block
bogus: [not inserted]
Attached to: /machine/peripheral-anon/device[0]
Removable device: not locked, tray closed
(qemu) info qtree
bus: main-system-bus
type System
[...]
bus: ide.1
type IDE
dev: ide-cd, id ""
---> drive = "bogus"
[...]
unit = 0 (0x0)
[...]
This kind of abuse has always worked. Deprecate it:
qemu-system-x86_64: -drive if=floppy,id=bogus,unit=7: warning: bogus if=floppy is deprecated, use if=none
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-9-armbru@redhat.com>
Helper function fdctrl_init_isa() is less than helpful: one of three
places creating "isa-fdc" devices use it. Open-code it there, and
drop the function.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622094227.1271650-6-armbru@redhat.com>
The floppy controller devices desugar their drive properties into
floppy devices (since commit a92bd191a4 "fdc: Move qdev properties to
FloppyDrive", v2.8.0). This involves some bad magic in
fdctrl_connect_drives(), and exists for backward compatibility.
The functions for boards to create floppy controller devices
fdctrl_init_isa(), fdctrl_init_sysbus(), and sun4m_fdctrl_init()
desugar -drive if=floppy to these floppy controller drive properties.
If you use both -drive if=floppy (or its -fda / -fdb sugar) and
-global isa-fdc for the same floppy device, -global silently loses the
conflict, and both backends involved end up with the floppy device
frontend attached, as demonstrated by iotest 172 (see commit before
previous). This is wrong.
Desugar -drive if=floppy straight to floppy devices instead, with
helper fdctrl_init_drives(). The conflict now gets rejected cleanly:
first, fdctrl_connect_drives() creates the floppy for the controller's
property, then fdctrl_init_drives() attempts to create the floppy for
-drive if=floppy, but fails because the unit is already in use.
Output of iotest 172 changes in three ways:
1. The clash gets rejected.
2. In one test case, "info qtree" has the floppy devices swapped, and
"info block" has their QOM paths swapped. This is because the
floppy device for -fda now gets created after the one for -global
isa-fdc.driveB.
3. The error message for -global floppy.drive=floppy0 changes. Before
the patch, we set isa-fdc.driveA to -fda's block backend, then
create the floppy device for it, then move the backend from
isa-fdc.driveA to floppy.drive. Floppy creation fails when
applying -global floppy.drive=floppy0, because floppy0 is still
attached to isa-fdc. After the patch, we create the floppy for
-fda, then set its drive property to floppy0. Now floppy creation
succeeds, but setting the drive property fails, because -global
already set it. Yes, this is exasperatingly complicated.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200622094227.1271650-5-armbru@redhat.com>
'ARM SBCon two-wire serial bus interface' is the official
name describing the pair of registers used to bitbanging
I2C in the Versatile boards.
Make the private VersatileI2CState structure as public
ArmSbconI2CState.
Add the TYPE_ARM_SBCON_I2C, alias to our current
TYPE_VERSATILE_I2C model.
Rename the memory region description as 'arm_sbcon_i2c'.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200617072539.32686-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the RX machine internally simulated in GDB.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Split of MCU, rename gdbsim, Add gdbsim-r5f562n7/r5f562n8]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Make the current TYPE_RX62N_MCU an abstract class, and
generate TYPE_R5F562N7_MCU and TYPE_R5F562N8_MCU models.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
rx62n - RX62N cpu.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Use TYPE_RX62N_CPU, use #define for RX62N_NR_TMR/CMT/SCI,
renamed CPU -> MCU, device -> microcontroller]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200224141923.82118-18-ysato@users.sourceforge.jp>
[PMD: Rebased on b77b5b3dc7, split of machine, use &error_abort]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This module supported only non FIFO type.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-17-ysato@users.sourceforge.jp>
[PMD: Filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
renesas_cmt: 16bit compare match timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-16-ysato@users.sourceforge.jp>
[PMD: Split from TMR, filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
renesas_tmr: 8bit timer modules.
This part use many renesas's CPU.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-16-ysato@users.sourceforge.jp>
[PMD: Split from CMT, filled VMStateField for migration]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This implementation supported only ICUa.
Hardware manual.
https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200224141923.82118-15-ysato@users.sourceforge.jp>
[PMD: Fill VMStateField for migration, cover files in MAINTAINERS]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Extract timer definitions to 'hw/timer/tmu012.h'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Use the MemoryRegion type defined in "qemu/typedefs.h",
to keep the repository style consistent.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
It is enough to simply map the SiFive FU540 DDR memory controller
into the MMIO space using create_unimplemented_device(), to make
the upstream U-Boot v2020.07 DDR memory initialization codes happy.
Note we do not generate device tree fragment for the DDR memory
controller. Since the controller data in device tree consumes a
very large space (see fu540-hifive-unleashed-a00-ddr.dtsi in the
U-Boot source), and it is only needed by U-Boot SPL but not any
operating system, we choose not to generate the fragment here.
This also means when testing with U-Boot SPL, the device tree has
to come from U-Boot SPL itself, but not the one generated by QEMU
on the fly. The memory has to be set to 8GiB to match the real
HiFive Unleashed board when invoking QEMU (-m 8G).
With this commit, QEMU can boot U-Boot SPL built for SiFive FU540
all the way up to loading U-Boot proper from MMC:
$ qemu-system-riscv64 -nographic -M sifive_u,msel=6 -m 8G -bios u-boot-spl.bin
U-Boot SPL 2020.07-rc3-00208-g88bd5b1 (Jun 08 2020 - 20:16:10 +0800)
Trying to boot from MMC1
Unhandled exception: Load access fault
EPC: 0000000008009be6 TVAL: 0000000010050014
The above exception is expected because QSPI is unsupported yet.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1592268641-7478-6-git-send-email-bmeng.cn@gmail.com
Message-Id: <1592268641-7478-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SiFive FU540 SoC supports booting from several sources, which are
controlled using the Mode Select (MSEL[3:0]) pins on the chip.
Typically, the boot process runs through several stages before it
begins execution of user-provided programs.
The SoC supports booting from memory-mapped QSPI flash, which is
how start_in_flash property is used for at present. This matches
MSEL = 1 configuration (QSPI0).
Typical booting flows involve the Zeroth Stage Boot Loader (ZSBL).
It's not necessary for QEMU to implement the full ZSBL ROM codes,
because we know ZSBL downloads the next stage program into the L2
LIM at address 0x8000000 and executes from there. We can bypass
the whole ZSBL execution and use "-bios" to load the next stage
program directly if MSEL indicates a ZSBL booting flow.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1592268641-7478-4-git-send-email-bmeng.cn@gmail.com
Message-Id: <1592268641-7478-4-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
On SiFive FU540 SoC, the value stored at physical address 0x1000
stores the MSEL pin state that is used to control the next boot
location that ROM codes jump to.
Add a new property msel to sifive_u machine for this.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-12-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-12-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SiFive FU540 SoC integrates a GPIO controller with 16 GPIO lines.
This hooks the exsiting SiFive GPIO model to the SoC, and adds its
device tree data as well.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-8-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-8-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a new property to represent the number of GPIO pins supported
by the GPIO controller.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-7-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-7-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do various minor clean-ups to the exisiting codes for:
- coding convention conformance
- remove unnecessary blank lines
- spell SiFive correctly
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1591625864-31494-6-git-send-email-bmeng.cn@gmail.com
Message-Id: <1591625864-31494-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Ibex core contains a PLIC that although similar to the RISC-V spec
is not RISC-V spec compliant.
This patch implements a Ibex PLIC in a somewhat generic way.
As the current RISC-V PLIC needs tidying up, my hope is that as the Ibex
PLIC move towards spec compliance this PLIC implementation can be
updated until it can replace the current PLIC.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This is the initial commit of the Ibex UART device. Serial TX is
working, while RX has been implemeneted but untested.
This is based on the documentation from:
https://docs.opentitan.org/hw/ip/uart/doc/
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com>
We are going to split the TPM backends from the TPM emulated
hardware in the next commit. Make the TPM util helpers accessible
by moving local "tpm_util.h" to global "sysemu/tpm_util.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-12-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Version: GnuPG v1
iQEcBAABAgAGBQJe62kmAAoJEO8Ells5jWIRZfUH/2bPZrhG4QEKNWbm1LXzam+0
4dzG3A7vYTKWjfbpzcWtUAELO+4SiUe/IU3gYMiyeWNDKjwm5hX/FMCFjnR1IZXl
wQ7cvr/7TIsxt9HyrjIkh03PkJBGpCD3uO0DkGd1siDmKLOFNRt0uLsmSvA7Ydvo
2hH/tc/plYoQAxPSbXBmIqg9hRrks/QAw2kfPba7Adhtzg5x2XrUrP+UOW8NmWcL
xSo02ExPUSdzPX6I4Enwm1c1KiytlQ77LvazpI2NBlejsI4nqa0Y1WJW7WJ4RMGo
E1kWDiKt69MoT1SgH7UJnF/ISyUuldksD4fuual5UOysCpwpbAIBKh6/Yod6k0M=
=3+ix
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into staging
# gpg: Signature made Thu 18 Jun 2020 14:16:22 BST
# gpg: using RSA key EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (33 commits)
net: Drop the NetLegacy structure, always use Netdev instead
net: Drop the legacy "name" parameter from the -net option
hw/net/e1000e: Do not abort() on invalid PSRCTL register value
colo-compare: Fix memory leak in packet_enqueue()
net/colo-compare.c: Correct ordering in complete and finalize
net/colo-compare.c: Check that colo-compare is active
net/colo-compare.c: Only hexdump packets if tracing is enabled
net/colo-compare.c: Fix deadlock in compare_chr_send
chardev/char.c: Use qemu_co_sleep_ns if in coroutine
net/colo-compare.c: Create event_bh with the right AioContext
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
net: cadence_gem: Fix RX address filtering
net: cadence_gem: TX_LAST bit should be set by guest
net: cadence_gem: Update the reset value for interrupt mask register
net: cadnece_gem: Update irq_read_clear field of designcfg_debug1 reg
net: cadence_gem: Add support for jumbo frames
net: cadence_gem: Fix up code style
net: cadence_gem: Move tx/rx packet buffert to CadenceGEMState
net: cadence_gem: Set ISR according to queue in use
net: cadence_gem: Define access permission for interrupt registers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a property "jumbo-max-len", which sets default value of jumbo frames
up to 16,383 bytes. Add Frame length checks for standard and jumbo
frames.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Moving this buffers to CadenceGEMState, as their size will be increased
more when JUMBO frames support is added.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Similar to VMSTATE_VARRAY_UINT32_ALLOC, but the size is
16-bit field.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Suggest VIRTIO_NET_F_HASH_REPORT if specified in device
parameters.
If the VIRTIO_NET_F_HASH_REPORT is set,
the device extends configuration space. If the feature
is negotiated, the packet layout is extended to
accomodate the hash information. In this case deliver
packet's hash value and report type in virtio header
extension.
Use for configuration the same procedure as already
used for RSS. We add two fields in rss_data that
controls what the device does with the calculated hash
if rss_data.enabled is set. If field 'populate' is set
the hash is set in the packet, if field 'redirect' is
set the hash is used to decide the queue to place the
packet to.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If VIRTIO_NET_F_RSS negotiated and RSS is enabled, process
incoming packets, calculate packet's hash and place the
packet into respective RX virtqueue.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
-----BEGIN PGP SIGNATURE-----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=fyFP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- enhance handling of size-related BlockConf properties
- nvme: small fixes, refactoring and cleanups
- virtio-blk: On restart, process queued requests in the proper context
- icount: make dma reads deterministic
- iotests: Some fixes for rarely run cases
- .gitignore: Ignore storage-daemon files
- Minor code cleanups
# gpg: Signature made Wed 17 Jun 2020 15:47:19 BST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (43 commits)
iotests: Add copyright line in qcow2.py
iotests/{190,291}: compat=0.10 is unsupported
iotests/229: data_file is unsupported
iotests/292: data_file is unsupported
iotests/041: Skip test_small_target for qed
iotests.py: Add skip_for_formats() decorator
block: lift blocksize property limit to 2 MiB
qdev-properties: add getter for size32 and blocksize
block: make BlockConf size props 32bit and accept size suffixes
qdev-properties: make blocksize accept size suffixes
qdev-properties: add size32 property type
qdev-properties: blocksize: use same limits in code and description
block: consolidate blocksize properties consistency checks
virtio-blk: store opt_io_size with correct size
.gitignore: Ignore storage-daemon files
hw/block/nvme: verify msix_init_exclusive_bar() return value
hw/block/nvme: add msix_qsize parameter
hw/block/nvme: Verify msix_vector_use() returned value
hw/block/nvme: factor out controller identify setup
hw/block/nvme: do cmb/pmr init as part of pci init
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We have a use case (vfio-ccw) where a CRW is already built and
ready to use. Rather than teasing out the components just to
reassemble it later, let's rework this code so we can queue a
fully-qualified CRW directly.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-6-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The schib region can be used to obtain the latest SCHIB from the host
passthrough subchannel. Since the guest SCHIB is virtualized,
we currently only update the path related information so that the
guest is aware of any path related changes when it issues the
'stsch' instruction.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505125757.98209-4-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Convert all size-related properties in BlockConf to 32bit. This will
accommodate bigger block sizes (in a followup patch). This also allows
to make them all accept size suffixes, either via DEFINE_PROP_BLOCKSIZE
or via DEFINE_PROP_SIZE32.
Also, since min_io_size is exposed to the guest by scsi and virtio-blk
devices as an uint16_t in units of logical blocks, introduce an
additional check in blkconf_blocksizes to prevent its silent truncation.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-7-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce size32 property type which handles size suffixes (k, m, g)
just like size property, but is uint32_t rather than uint64_t. It's
going to be useful for properties that are byte sizes but are inherently
32bit, like BlkConf.opt_io_size or .discard_granularity (they are
switched to this new property type in a followup commit).
The getter for size32 is left out for a separate patch as its benefit is
less obvious, and it affects test output; for now the regular uint32
getter is used.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20200528225516.1676602-5-rvkagan@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
